11 Ways to Fix it When My Motorola Edge 40 Pro Wont Charge | Dr.fone
11 Ways to Fix it When My Motorola Edge 40 Pro Won’t Charge
What would you do if your phone or other device’s battery is draining? You will plug it into a power source. Right? What if you realize that your phone won’t charge? My phone won’t charge, and the Motorola Edge 40 Pro tablet won’t charge is a common problem.
Android devices are very prone to this problem, and hence Android device owners complain frequently that My Motorola Edge 40 Pro won’t charge even when it is plugged into a power source properly. The reason behind the phone won’t charge, or Motorola Edge 40 Pro tablet won’t charge are not very complicated and, therefore, can be dealt with by you sitting at home.
A charging problem can occur due to a temporary software crash. It is also possible that a corrupted device cache may be causing such a glitch. Another reason for phones not to charge normally or charge slowly is an inappropriate power source or defective charging cable and adapter. All these and many more problems will be cured in the 10 solutions to fix My Motorola Edge 40 Pro won’t charge error.
So if you’re still thinking about why won’t My Motorola Edge 40 Pro charge, read on to find out solutions to fix My Motorola Edge 40 Pro won’t charge problem.
Part 1. One-click solution to fix Android phone won’t charge
While you are upset over ‘why My Motorola Edge 40 Pro won’t charge?’, would you mind us helping you around?
Well, we have got Dr.Fone - System Repair (Android) at your fingertips to get rid of this annoying phone won’t charge issues (caused by system corruption). Whether the Motorola Edge 40 Pro device froze or became unresponsive, bricked, or got stuck on the Motorola Edge 40 Pro logo/blue screen of death or apps started crashing. It can fix every Android system problem.
Dr.Fone - System Repair (Android)
Easy-to-operate program to fix Android phone won’t charge
- As it supports all the latest Motorola Edge 40 Pro devices, it can even easily fix the Motorola Edge 40 Pro tablet won’t charge issue.
- With a single click, you can fix your entire Android system issues.
- The very first tool is available in the market for Android system repair.
- Without any technical knowledge, one can use this software.
- This tool is intuitive with a high success rate.
3981454 people have downloaded it
Note: When you are stressed over ‘why won’t My Motorola Edge 40 Pro charge’, we are ready to eliminate the tension and make things easier for you. But, before you start fixing the phone won’t charge the problem, make sure to back up the Android device . This fixing process might wipe out all the Motorola Edge 40 Pro device data.
Phase 1: Preparing and connecting the Android device
Step 1: Install and then run Dr.Fone - System Repair (Android), the ultimate Android repair software on your PC. Hit the ‘System Repair’ tab, followed by connecting your Motorola Edge 40 Pro.
Step 2: Tap on the ‘Android Repair’ option and then click ‘Start’ for moving ahead.
Step 3: Mention the detailed information about your Motorola Edge 40 Pro under the Motorola Edge 40 Pro device information section. Press ‘Next’ then on.
![enter android info](https://images.wondershare.com/drfone/guide/android-system-repair-2.png)Phase 2: Get to ‘Download’ mode for repairing the Motorola Edge 40 Pro device
Step 1: It’s essential that you put the Android device under ‘Download’ mode to resolve the phone won’t charge the issue. Here comes how to do –
- With a ‘Home’ button device, switch off it before holding down the set of keys, including ‘Power’, ‘Volume Down’, and ‘Home’ key for 5-10 seconds. Let them go and hit the ‘Volume Up’ key for entering the ‘Download’ mode.
- If the ‘Home’ button is not there, you got to turn down the Motorola Edge 40 Pro device and altogether hold down the ‘Volume Down’, ‘Bixby’, and ‘Power’ keys between 5-10 seconds. Soon after you release the keys, tap the ‘Volume Up’ button for entering the ‘Download’ mode.
Step 2: Click ‘Next’ to start downloading the Android firmware.
Step 3: Now, Dr.Fone - System Repair (Android) would verify the firmware and then start repairing the Android system on its own. It will ultimately fix your ‘why won’t My Motorola Edge 40 Pro charge’ trouble.
Part 2. 10 common ways to fix Android won’t charge
1. Check/replace charging cable
Charging cables fray or become defunct after prolonged usage. Therefore, it is advised to always use the Motorola Edge 40 Pro device’s original charging cable or purchase a good quality charging cord, which doesn’t damage your device or your adapter.
It is also very commonly observed that the charging end of the cable which gets connected to the charging port of the Motorola Edge 40 Pro device gets damaged and prevents the current from flowing to the phone/tablet.
2. Check/clean charging port
The charging port in your device is a small opening where the charging end of the cabbie is inserted for the current to flow to the phone/tablet. Very often, we notice that the charging port gets blocked with tiny particles of dirt. The charging port might also get clogged if dirt and dust get accumulated in it, preventing the sensors from receiving and forwarding the current to the Motorola Edge 40 Pro device.
The best way to take this problem is to clean the port with a blunt pin or a soft bristle unused toothbrush. Make sure you clean the port gently and do not damage it or its sensors.
3. Check/replace charging adapter
This method is fairly simple, and all you need to do is check whether or not the charging adapter is working properly as sometimes, the adapter itself is to be blamed for the charge. To make sure that you are not using a defective adapter, connect your charging cable/USB to another adapter. If your device charges normally, it means there is a problem is with your adapter, and you must replace it at the earliest to solve My Motorola Edge 40 Pro won’t charge the issue.
4. Try another power source
This technique is more like a quick trick. It means to switch from one power source to another or use a more efficient and suitable power source. Laptops and PCs charge slower than a direct power source, i.e., a wall socket. Sometimes, the charging speed is slower, and the battery is draining. In such a scenario, choose to charge your device by directly plugging it into a socket on the wall to never experience My Motorola Edge 40 Pro won’t charge problem.
5. Clear device Cache
Clearing Cache is a great technique as it cleans your device and all its partitions. By clearing the cache, all the unwanted data and files stored in your device get deleted, which may be causing glitches in the Motorola Edge 40 Pro device’s software, preventing it from recognizing the current.
Follow the steps given below to clear your device’s cache:
• Visit “Settings” and find “Storage”
• Now tap on “Cached Data”.
• Click “OK” to clear all unwanted cache from your device as shown above.
Try charging your phone after clearing the cache. If your phone doesn’t charge even now, do not worry. There are more ways to help you combat My Motorola Edge 40 Pro won’t charge problem.
6. Re-start/reboot your phone/tablet
Restarting your device to fix why won’t My Motorola Edge 40 Pro charge error is a very effective remedy. This method of rebooting your device not only fixes software glitches but other but also tackles other factors/operations that might be running in the background preventing your device from charging.
Restarting a device is simple and can be done by following the steps given below:
• Long press the power button of your device.
• From the options that appear, click on “Restart”/ “Reboot” as shown in the image below.
To restart your device, you may also press the power button for about 20-25 seconds for the phone/tablet to automatically reboot.
7. Download and install the Ampere App
The Ampere app can be downloaded from the Google Play Store. It is very helpful to fix the why won’t my charge error as it gives you real-time information about your device’s battery consumption, charging status, and other essential data.
If the App gives information in green color, it means all is wetland your device is charging normally, however, if the information before you is in orange, you need to take steps to fix the charging problem.
8. Install software updates
Installing your Android version updates is a good idea as the software is the interface that receives charge from the charging port sensors and gives a command for the phone/tablet to charge. People often continue to use older OS versions, which cause trouble and prevent the Motorola Edge 40 Pro device from charging.
To check for and install updates on your device, you must be connected to WiFi or a cellular network. Next, visit “Settings” and select “About device”. Now click on “Software Update”.
If there is an update available, you will be prompted to download it. Just follow the instructions given before you install a brand new Android OS version on your device.
9. Factory reset your device
Factory Reset is must be done after due deliberation. Remember to take a back-up of all your data and contents on the cloud or an external memory device, such as a pen drive before adopting this method because once you perform a factory reset on your device, all media, contents, data and other files are wiped out, including your device settings.
Follow the steps given below to factory reset your device:
• Visit “Settings” by clicking the settings icon as shown below.
• Now select “Backup and Reset” and move on.
• In this step, select “Factory data reset” and then “Reset Device”.
• Finally, tap on “ERASE EVERYTHING” as shown below to Factory Reset your device.
Note: Once the factory reset process is complete, your device will automatically restart and you will have to set it up once again.
10. Replace your battery
This should be your last resort to fix My Motorola Edge 40 Pro won’t charge problem, and you should only attempt to replace your battery if none of the other techniques work. Also, please consult a technician before purchasing and installing a new battery in your device as different phones and tablets have a different type of battery requirements.
Finally, fixing the phone won’t charge the problem is simple, and therefore there is no need for you to worry as you are not the only one experiencing such an issue. Other Android users have tried, tested, and recommended the methods given above to solve why won’t My Motorola Edge 40 Pro charge or Motorola Edge 40 Pro tablet won’t charge error. So go ahead and try them out now.
How To Revive Your Bricked Motorola Edge 40 Pro in Minutes
Motorola Edge 40 Pro has established a notable presence within the custom development arena. This trait holds for Motorola Edge 40 Pro. Today, it’s still one of the most popular budget smartphones available. The popular smartphone offers the freedom to flash custom ROMs, attain administrative privileges, access countless customization options, and much more.
Yet, delving into these capabilities comes with its share of risks. The potential for your Motorola Edge 40 Pro to brick is high if you don’t know what you’re doing. This page teaches you how to unbrick your Motorola Edge 40 Pro if it happens.
Part 1. Potential Causes of a Motorola Edge 40 Pro Becoming Bricked
The factors that lead to your Motorola Edge 40 Pro to brick vary. The possible solutions also depend upon the underlying causes. At times, the manufacturer’s intervention remains the only viable remedy. Below are the most frequent causes of bricking.
- The presence of malicious malware can harm your Motorola Edge 40 Pro. This can result in a ‘bricked’ state devoid of functionality.
- Altering the bootloader, system partition, or other critical software components risks triggering a bricking event.
- Bricking can also occur due to errors during the update process. Whether through automatic or manual downloads, any interruption during software updates can cause your Motorola Edge 40 Pro to brick.
- Using inappropriate methods when performing root access can also result in bricking. Performing root access is dangerous as it grants entry to the Motorola Edge 40 Pro device’s root directory housing the operating system.
Every Android device is susceptible to experiencing a system failure that leads to a bricked state. The risk remains consistent whether your device is from Motorola Edge 40 Pro, Motorola Edge 40 Pro, Motorola Edge 40 Pro, or any other brand. That’s why it’s strongly advised against modifying their smartphones, especially when you don’t know what you’re doing.
Parental Control Software
## Part 2. Techniques To Unbrick a Motorola Edge 40 ProWhen faced with a bricked Motorola Edge 40 Pro, below are various techniques to revive it. Whether through software resets or hardware interventions, these methods can help breathe life back into your device.
Discharge the Battery
A particular suggestion involves allowing the Motorola Edge 40 Pro device’s battery to discharge fully, enabling proper functionality of the Flash Tool software. This process typically spans a few days and is recommended by some specialists.
Perform a Factory Reset
Accessing the Motorola Edge 40 Pro device settings is impossible if your Motorola Edge 40 Pro bricks. For this reason, it is recommended to enter Recovery Mode. Here’s how.
- Step 1: Press and hold the Power button and select the Restart option. During the reboot, press the Volume Up and Power keys simultaneously.
- Step 2: The main menu will show three options: Reboot, Wipe Data, and Connect with MIAssistant. Choose Reboot.
Explore Dedicated Software Tools To Fix Bricked Phones
Motorola Edge 40 Pro offers its official software tools, such as the Motorola Edge 40 ProFlash Tool. It’s designed for advanced users familiar with flashing firmware onto their devices. Here’s how.
- Step 1: Download and install the Motorola Edge 40 ProFlash Tool .
- Step 2: Download the Stock Firmware of Motorola Edge 40 Pro and extract it on your computer. Press and Hold the Power and Volume Down buttons for at least 5-10 seconds to enter Fastboot Mode.
Project Manager - Asset Browser for 3Ds Max
- Step 3: Connect your Motorola Edge 40 Pro to the computer using a USB cable. Launch Motorola Edge 40 ProFlash Tool and locate the Firmware you have downloaded on the computer. Click the refresh > flash to begin the flashing process.
- Step 4: The SUCCESS result should appear in the Motorola Edge 40 ProFlash Tool once the flashing process is done.
However, if the Motorola Edge 40 ProFlash Tool did not unbrick your Motorola Edge 40 Pro, consider using Wondershare Dr.Fone - System Repair (Android). The platform allows you to unbrick your Motorola Edge 40 Pro with a few clicks.
Part 3. Reviving Your Motorola Edge 40 Pro Using Wondershare Dr.Fone - System Repair (Android)
Dr.Fone - System Repair (Android) equips Motorola Edge 40 Pro users with the ability to tackle soft brick and hard brick issues. This specialized Android repair tool enables you to restore your Motorola Edge 40 Pro through a streamlined process, requiring just a few simple clicks.
- Title: 11 Ways to Fix it When My Motorola Edge 40 Pro Wont Charge | Dr.fone
- Author: Ariadne
- Created at : 2024-07-30 07:16:06
- Updated at : 2024-07-31 07:16:06
- Link: https://howto.techidaily.com/11-ways-to-fix-it-when-my-motorola-edge-40-pro-wont-charge-drfone-by-drfone-fix-android-problems-fix-android-problems/
- License: This work is licensed under CC BY-NC-SA 4.0.