11 Ways to Fix it When My Realme Narzo 60 5G Won’t Charge

What would you do if your phone or other device’s battery is draining? You will plug it into a power source. Right? What if you realize that your phone won’t charge? My phone won’t charge, and the Realme Narzo 60 5G tablet won’t charge is a common problem.

Android devices are very prone to this problem, and hence Android device owners complain frequently that My Realme Narzo 60 5G won’t charge even when it is plugged into a power source properly. The reason behind the phone won’t charge, or Realme Narzo 60 5G tablet won’t charge are not very complicated and, therefore, can be dealt with by you sitting at home.

A charging problem can occur due to a temporary software crash. It is also possible that a corrupted device cache may be causing such a glitch. Another reason for phones not to charge normally or charge slowly is an inappropriate power source or defective charging cable and adapter. All these and many more problems will be cured in the 10 solutions to fix My Realme Narzo 60 5G won’t charge error.

So if you’re still thinking about why won’t My Realme Narzo 60 5G charge, read on to find out solutions to fix My Realme Narzo 60 5G won’t charge problem.

Part 1. One-click solution to fix Android phone won’t charge

While you are upset over ‘why My Realme Narzo 60 5G won’t charge?’, would you mind us helping you around?

Well, we have got Dr.Fone - System Repair (Android) at your fingertips to get rid of this annoying phone won’t charge issues (caused by system corruption). Whether the Realme Narzo 60 5G device froze or became unresponsive, bricked, or got stuck on the Realme Narzo 60 5G logo/blue screen of death or apps started crashing. It can fix every Android system problem.

Dr.Fone - System Repair (Android)

Easy-to-operate program to fix Android phone won’t charge

• As it supports all the latest Realme Narzo 60 5G devices, it can even easily fix the Realme Narzo 60 5G tablet won’t charge issue.
• With a single click, you can fix your entire Android system issues.
• The very first tool is available in the market for Android system repair.
• Without any technical knowledge, one can use this software.
• This tool is intuitive with a high success rate.

3981454 people have downloaded it

Note: When you are stressed over ‘why won’t My Realme Narzo 60 5G charge’, we are ready to eliminate the tension and make things easier for you. But, before you start fixing the phone won’t charge the problem, make sure to back up the Android device . This fixing process might wipe out all the Realme Narzo 60 5G device data.

Phase 1: Preparing and connecting the Android device

Step 1: Install and then run Dr.Fone - System Repair (Android), the ultimate Android repair software on your PC. Hit the ‘System Repair’ tab, followed by connecting your Realme Narzo 60 5G.

Step 2: Tap on the ‘Android Repair’ option and then click ‘Start’ for moving ahead.

Step 3: Mention the detailed information about your Realme Narzo 60 5G under the Realme Narzo 60 5G device information section. Press ‘Next’ then on.

Phase 2: Get to ‘Download’ mode for repairing the Realme Narzo 60 5G device

Step 1: It’s essential that you put the Android device under ‘Download’ mode to resolve the phone won’t charge the issue. Here comes how to do –

• With a ‘Home’ button device, switch off it before holding down the set of keys, including ‘Power’, ‘Volume Down’, and ‘Home’ key for 5-10 seconds. Let them go and hit the ‘Volume Up’ key for entering the ‘Download’ mode.

• If the ‘Home’ button is not there, you got to turn down the Realme Narzo 60 5G device and altogether hold down the ‘Volume Down’, ‘Bixby’, and ‘Power’ keys between 5-10 seconds. Soon after you release the keys, tap the ‘Volume Up’ button for entering the ‘Download’ mode.

Step 2: Click ‘Next’ to start downloading the Android firmware.

Step 3: Now, Dr.Fone - System Repair (Android) would verify the firmware and then start repairing the Android system on its own. It will ultimately fix your ‘why won’t My Realme Narzo 60 5G charge’ trouble.

Part 2. 10 common ways to fix Android won’t charge

1. Check/replace charging cable

Charging cables fray or become defunct after prolonged usage. Therefore, it is advised to always use the Realme Narzo 60 5G device’s original charging cable or purchase a good quality charging cord, which doesn’t damage your device or your adapter.

It is also very commonly observed that the charging end of the cable which gets connected to the charging port of the Realme Narzo 60 5G device gets damaged and prevents the current from flowing to the phone/tablet.

2. Check/clean charging port

The charging port in your device is a small opening where the charging end of the cabbie is inserted for the current to flow to the phone/tablet. Very often, we notice that the charging port gets blocked with tiny particles of dirt. The charging port might also get clogged if dirt and dust get accumulated in it, preventing the sensors from receiving and forwarding the current to the Realme Narzo 60 5G device.

The best way to take this problem is to clean the port with a blunt pin or a soft bristle unused toothbrush. Make sure you clean the port gently and do not damage it or its sensors.

3. Check/replace charging adapter

This method is fairly simple, and all you need to do is check whether or not the charging adapter is working properly as sometimes, the adapter itself is to be blamed for the charge. To make sure that you are not using a defective adapter, connect your charging cable/USB to another adapter. If your device charges normally, it means there is a problem is with your adapter, and you must replace it at the earliest to solve My Realme Narzo 60 5G won’t charge the issue.

4. Try another power source

This technique is more like a quick trick. It means to switch from one power source to another or use a more efficient and suitable power source. Laptops and PCs charge slower than a direct power source, i.e., a wall socket. Sometimes, the charging speed is slower, and the battery is draining. In such a scenario, choose to charge your device by directly plugging it into a socket on the wall to never experience My Realme Narzo 60 5G won’t charge problem.

5. Clear device Cache

Clearing Cache is a great technique as it cleans your device and all its partitions. By clearing the cache, all the unwanted data and files stored in your device get deleted, which may be causing glitches in the Realme Narzo 60 5G device’s software, preventing it from recognizing the current.

Follow the steps given below to clear your device’s cache:

• Visit “Settings” and find “Storage”

• Now tap on “Cached Data”.

• Click “OK” to clear all unwanted cache from your device as shown above.

Try charging your phone after clearing the cache. If your phone doesn’t charge even now, do not worry. There are more ways to help you combat My Realme Narzo 60 5G won’t charge problem.

6. Re-start/reboot your phone/tablet

Restarting your device to fix why won’t My Realme Narzo 60 5G charge error is a very effective remedy. This method of rebooting your device not only fixes software glitches but other but also tackles other factors/operations that might be running in the background preventing your device from charging.

Restarting a device is simple and can be done by following the steps given below:

• Long press the power button of your device.

• From the options that appear, click on “Restart”/ “Reboot” as shown in the image below.

To restart your device, you may also press the power button for about 20-25 seconds for the phone/tablet to automatically reboot.

7. Download and install the Ampere App

The Ampere app can be downloaded from the Google Play Store. It is very helpful to fix the why won’t my charge error as it gives you real-time information about your device’s battery consumption, charging status, and other essential data.

If the App gives information in green color, it means all is wetland your device is charging normally, however, if the information before you is in orange, you need to take steps to fix the charging problem.

8. Install software updates

Installing your Android version updates is a good idea as the software is the interface that receives charge from the charging port sensors and gives a command for the phone/tablet to charge. People often continue to use older OS versions, which cause trouble and prevent the Realme Narzo 60 5G device from charging.

To check for and install updates on your device, you must be connected to WiFi or a cellular network. Next, visit “Settings” and select “About device”. Now click on “Software Update”.

If there is an update available, you will be prompted to download it. Just follow the instructions given before you install a brand new Android OS version on your device.

9. Factory reset your device

Factory Reset is must be done after due deliberation. Remember to take a back-up of all your data and contents on the cloud or an external memory device, such as a pen drive before adopting this method because once you perform a factory reset on your device, all media, contents, data and other files are wiped out, including your device settings.

Follow the steps given below to factory reset your device:

• Visit “Settings” by clicking the settings icon as shown below.

• Now select “Backup and Reset” and move on.

• In this step, select “Factory data reset” and then “Reset Device”.

• Finally, tap on “ERASE EVERYTHING” as shown below to Factory Reset your device.

Note: Once the factory reset process is complete, your device will automatically restart and you will have to set it up once again.

10. Replace your battery

This should be your last resort to fix My Realme Narzo 60 5G won’t charge problem, and you should only attempt to replace your battery if none of the other techniques work. Also, please consult a technician before purchasing and installing a new battery in your device as different phones and tablets have a different type of battery requirements.

Finally, fixing the phone won’t charge the problem is simple, and therefore there is no need for you to worry as you are not the only one experiencing such an issue. Other Android users have tried, tested, and recommended the methods given above to solve why won’t My Realme Narzo 60 5G charge or Realme Narzo 60 5G tablet won’t charge error. So go ahead and try them out now.

What To Do When Realme Narzo 60 5G Has Black Screen of Death?

Have you ever got the error of freezing the Android device home screen? Or the notification light keeps blinking without anything shown on display? Then you are facing Android black screen of death.

This scenario is common with many Android mobile users, and they always hunt for solutions to get rid of this Android black screen problem. Here are some more situations that can assure you that you are facing Android black screen of death.

• The light of the phone is blinking but the Realme Narzo 60 5G device is not responding.
• The phone is hanging and freezing very frequently.
• The mobile is rebooting and crashing more often and the battery is draining a lot faster.
• Phone restarts on its own.

If you face these situations, you might be facing the Android black screen of death issue. Follow this article, and we’ll discuss how to get rid of this annoying problem at ease.

Part 1: Why Android device gets black screen of death?

Similar to the “Blue Screen of Death “ (BSOD) on computers, the Android Black Screen of Death indicates a severe system crash or malfunction. When this issue occurs, the Realme Narzo 60 5G device’s display remains blank, and you are unable to interact with the Realme Narzo 60 5G device, access apps, or perform any actions. The cause of the Android black screen of death can vary, but some common factors include:

• Install incompatible apps or apps with bugs and viruses.
• Have bugs or errors in the Android operating system.
• Keep the mobile charged for long after it’s fully charged.
• Use a non-compatible charger.
• Use an old battery.
• Incorrectly install or incomplete system updates.
• Excessive heat due to heavy usage or environmental factors.

If you face the situations mentioned above, this is clearly a case of the Android screen black. But don’t worry about that. You can follow the article below to get rid of this situation on your own.

Part 2: How to rescue data when Android gets black screen of death?

This annoying Android black screen of death is making it impossible to access your internal data. So, the possibility is that you might lose all the data. We have a solution for all of your data recovery problems from a damaged Android device.

The solution for recovery data is the Dr.Fone - Data Recovery (Android) toolkit by Wondershare. This tool is highly appreciated worldwide and very popular for its feature-rich user interface. This tool can perform a lot of functions that can successfully recover the data from a damaged device.

Use this revolutionary toolkit to get the data back from the black tablet screen of death. Connect the Realme Narzo 60 5G device with the PC after installing this tool and follow the on-screen instruction, and all of your data will be transferred to your PC. Unfortunately, the tool is supported on selected Realme Narzo 60 5G Android devices as of now.

Dr.Fone - Data Recovery (Android)

A Dedicated Tool to Retrieve Data from Broken Android Devices .

• Recover data from broken devices or devices that are damaged in any other way, such as those has black screen.
• Recover photos, videos, contacts, messages, call logs, and more.
• Highest retrieval rate in the industry.
• Compatible with most Realme Narzo 60 5G devices.

3981454 people have downloaded it

Part 3: 9 Solutions to fix the black screen of death of Android

• 3.1 One click to fix the black screen of death
• 3.2 Force restart your Realme Narzo 60 5G
• 3.3 Check and clean your phone
• 3.4 Remove the battery
• 3.5 Recharge the Realme Narzo 60 5G device
• 3.6 Wipe cache partition to fix black screen of death
• 3.7 Uninstall incompatible apps
• 3.8 Reboot to safe mode
• 3.9 Factory reset to fix Android black screen of death

3.1 One click to fix the black screen of death

Facing an Android device with a black screen of death, I believe, is one of the gloomiest moments of one’s life, especially for those who know little about the technical part of Android. But here is the truth we have to admit: most cases of the black screen of death arise due to system glitches in Android.

What to do? Shall we find someone who is tech-savvy to seek help? Come on, this is the 21st century, and there are always one-click solutions to deal with technical issues for laymen like you and me.

Dr.Fone - System Repair (Android)

Fix Black Screen of Death for Android In One Click

• Fix all Android system issues like a black screen of death, OTA update failures, etc.
• Update the firmware of Android devices. No technical skills are required.
• Support all the new Realme Narzo 60 5G devices like Galaxy S22, S23, etc.
• Click-through operations to bring Android out of the black screen of death.

3,364,231 people have downloaded it

Here are the easy steps to get your Realme Narzo 60 5G out of the black screen of death:

1. Download and install the Dr.Fone tool. After launching it, you can see the following screen pop up.

   

2. Select “System Repair” from the home page, and then click on the “Android “.

   

3. Click “Start” to commence the Android system repair. In the next screen, select and confirm your Android model details like name, model, country, etc. and go on.

   

4. Boot your Android into Download mode by following the on-screen demonstrations.

   

5. Then the tool will download the Android firmware and flash the new firmware to your Realme Narzo 60 5G.

   

6. A moment later, your Realme Narzo 60 5G will be repaired completely, and the black screen of death will be fixed.

   

Video guide: How to fix the Android black screen of death step by step

safe & secure

3.2 Force restart your Realme Narzo 60 5G

Because it is the quickest and most painless solution, most people do this when their Android phone screen goes black too fast. The majority of phone issues can be resolved by performing a hard reboot. Here are the necessary measures if you haven’t tried this method before.

To reboot your Realme Narzo 60 5G, you may need to press a specific key combination, depending on the model you have, but most Android devices can be force restarted by doing the following steps:

Step 1: Press and hold the power button for about 10-15 seconds. Keep holding it until the Realme Narzo 60 5G device restarts.

Step 1: For Realme Narzo 60 5G devices, press and hold down the Power and Volume Down buttons for about 7 seconds.

3.3 Check and clean your phone

This method might not be popular with Android users, but this can do wonders when dealing with an Android black screen of death issue. To do this, follow the steps provided below:

Step 1: Ensure your phone’s buttons and ports are not stuck before anything else.

Step 2: See if dirt prevents you from turning the Realme Narzo 60 5G device on. Then, quickly press and release the button a few times.

Step 3: If the phone isn’t charging normally, ensure the charging port isn’t clogged with dust and debris by checking and cleaning it. You can gently blow out any debris in the charging port or use a wooden toothpick to pry it open.

Step 4: After you’re done with the cleaning, it’s best to charge the phone for at least 10 minutes. Just give it a quick charge and then try to restart it.

3.4 Remove the battery

If your phone’s battery is removable, you can try taking it out and trying again if restarting and cleaning it doesn’t fix the problem.

Step 1: To get started, take the phone apart by starting at the back.

Step 2: After 20 to 30 seconds, take out the battery and put it back in.

Note: When replacing the battery, ensure the metal contacts correctly connect to the phone.

This easy and straightforward method should help you fix your Android screen black issue, but if it doesn’t, continue reading, as this article got more techniques you can try.

3.5 Recharge the Realme Narzo 60 5G device

If your Realme Narzo 60 5G screen suddenly goes black, let the battery die completely. Then once the battery is completely dead, you should plug it in to charge and turn it on by pressing the Power button. Try to check if you still encounter the issue after doing so.

3.6 Wipe cache partition to fix black screen of death

If your Realme Narzo 60 5G turns on, but the screen remains black, clearing the cache partition should solve the problem. After all, keeping caches on your phone would cause it to run more slowly and cause other problems. Therefore, the issue can be resolved by clearing the cache partition. Check the following steps on how to do this below:

Step 1: Turn off your Realme Narzo 60 5G.

Step 2: Boot the Realme Narzo 60 5G device into Recovery Mode.

Note: The steps necessary to enter recovery mode will vary depending on your specific Android phone model. To ensure you’re doing the correct steps for your device, consult the user manual or look it up online. The following instructions work for Realme Narzo 60 5G devices:

• For older Realme Narzo 60 5G devices with the home button: Press and hold the Volume Up button, the Power button, and the Home buttons simultaneously.
• For newer Realme Narzo 60 5G devices without the home button: Press and hold the Volume Up button and the Power button together.
• If the Realme Narzo 60 5G device logo appears, release your grip, and the phone will restart.

Step 3: Find the Wipe cache partition option using the volume controls after entering Recovery Mode.

Step 4: Select Wipe cache partition by pressing the Power button.

Step 5: On the next screen, use the Volume Down button to highlight “Yes” and then press the Power button to confirm the cache wipe.

Step 6: The cache partition will be wiped, and you will see the “Cache wipe complete” message on the screen.

Step 7: Use the Volume Down button to navigate to the “Reboot system now” option and press the Power button to reboot your Realme Narzo 60 5G device.

After rebooting, you can see that you have successfully got rid of the annoying Android black screen of death. For most of the cases, this method solves the problem. If not, you have to move to the next method.

3.7 Uninstall incompatible apps

Android screen black can be a result of installing a bug or incompatible apps. If you have recently installed an app that crashes frequently, that may be the reason for the issue. Uninstalling the app from the Realme Narzo 60 5G device may solve the problem with ease. For doing this, you need to boot your device in Safe mode. Follow the below steps.

Step 1: Power down your device by pressing and holding the Power button until a menu appears.

Step 2: Navigate to Safe Mode by pressing and holding the Power Off button.

Step 3: Tap the “Safe mode” icon to enter Safe mode. You should now see Safe Mode at the Realme Narzo 60 5G device’s bottom.

Step 4: After selecting Settings, head to the Apps section.

Step 5: Select the app by clicking on it; the App Info window should appear. To uninstall the app, tap the Uninstall option from the menu below the screen.

Step 6: Now restart the Realme Narzo 60 5G device by pressing the power button and let it boot up in normal mode.

If the app is the reason for Android black screen of death, then after uninstalling, you can get rid of this issue. If not, now you have to factory reset your device to solve the problem.

3.8 Reboot to safe mode

Even after multiple attempts to launch them, certain applications act suspiciously and cause the Realme Narzo 60 5G device to crash. When an Android phone suddenly goes black, you can often isolate the problem to a specific app by booting into Safe mode.

Step 1: Begin by restarting your phone. To do that, press the Power button until a menu appears.

Step 2: Press the Power Off button to enter Safe mode.

Step 3: Activate Safe mode by clicking the “Safe Mode” icon.

Step 4: To return to Normal mode, turn off your device and then turn it back on.

3.9 Factory reset to fix Android black screen of death

The factory reset is the option that enables the factory state of your device by erasing all data, settings, bugs, and apps. Your device will be fresh like factory condition after this reset. Worth mentioning here, you’ll lose all the internal data and installed apps after this reset. So, to overcome the Android tablet black screen of death, you must perform this action as the last option. Follow the below steps carefully.

Step 1: Turn off the Realme Narzo 60 5G device. Then press the Volume Up + Power button + home button (or press Volume Up + Power buttonS) altogether and let the mobile boot into recovery mode.

Step 2: After booting up in recovery mode, you can find the “Factory data reset” option. Navigate to that option with the volume up and down arrow and select it with the power button.

Step 3: In this step, you need to confirm your action by tapping on the “Yes” option. After this, your device will start erasing. This may take a while to complete the whole process.

Now, your device will reboot automatically and you can see the Android black screen of death problem is solved.

Part 4: How to avoid Android black screen of death?

These are the general methods to overcome the situation of Android screen black. But to avoid this situation, here are a few tips to follow –

• Install apps from trusted suppliers only.
• Use security or antivirus software on your device.
• Take a backup at regular intervals.
• Always keep Android OS updated.
• Don’t keep your mobile charged for a long duration after a full charge.
• If your battery gets old, replace it soon.
• Keep your device’s storage well-maintained. Regularly delete unnecessary data.
• Close unused apps running in the background to conserve system resources.
• Prevent phone overheating by avoiding excessive usage, and not exposing it to direct sunlight for extended periods.

By following these steps, you should avoid the most unpleasant situations, such as the Android screen black. We all know that “Prevention is always better than cure”.

The Bottom Line

There could be a lot of reasons why an Android black screen issue occurs, but the important thing is knowing the correct ways how to fix it. And this article has covered nine proven methods to help you fix an Android phone screen black problem.

But among the methods discussed above, Dr.Fone – System Repair just stood out as this program does not only help you with a black screen of death problem, but it covers many other Android system issues too. It’s also a highly intuitive program that requires no skills to operate.

safe & secure

How to Fix Unfortunately, Contacts Has Stopped Error on Realme Narzo 60 5G

Have you recently noticed a message stating “Contacts has stopped”? This is enough to take away all your peace. As, our native contacts app stashes all our useful contacts which are time and again needed by a user. It’s malfunctioning is enough to give us chills. But, why the Realme Narzo 60 5G or any other Android device incurs such problems?

It can occur while you launch the app or while you’re in the app already finding the required contact or when any other application is trying to gain access to it. So, to rage a battle with this issue, you need to seek help of some powerful methods in killing down the issue of contacts app crashes. And, the best part is that you’ve secured yourself by reaching the right place. We will be taking an in-depth discussion on several methods that may prove to be helpful. Let’s read them up here now.

Part 1: Get Android system fixed in one click

We’re always in search of a method that provides handy solution in a quite speedy and hassle-free manner. There are hundreds of tips and tricks for the same. You never know the possibility of firmware being the major drawback. No amount of manual methods can beat the performance of Dr.Fone - System Repair (Android).It is capable of providing 100% solution to any kind of issues, your phone gets troubled with. It is designed with the technology of combating the problem of black screen of death, app crashes and several other issues. In just a single-click, ward off the issue and free your device with errors

Dr.Fone - System Repair (Android)

Fix Contacts app crashing on Android in one click

• Incorporates with 1-click technology to resolve any issues occurring in your Realme Narzo 60 5G. Black screen of death, app crash, system crash, faulty issues etc.
• fone – Repair (Android) interface is extremely simple for users and lays functionalities aptly.
• One of its kind software with highest success rate in the market.
• Fully compatible with all kinds of Android phones, models, as well as the popular carrier.
• It provides users with 24 hours customer care service to resolve queries.

3,016,434 people have downloaded it

In this tutorial, we will learn the methodology of addressing the contacts keep stopping problem and gain triumph over it.

Step 1: Load program and draw connection of device

Download Dr.Fone - System Repair (Android) on PC. While program installs, use USB cable to connect device with system. From interface, tap on “System Repair” main window.

Step 2: Opt for Android Repair option

You’ll be directed to the “System Repair” screen where you have to opt for “Android Repair” options appearing over the left panel of the program. After that, do not forget to press “Start”.

Step 3: Key in device information

From following screen, fill the fields of “Brand”, “Name”, “Model”, “Country” and several other parameters. Then, tap on “Next” option to proceed further.

Step 4: Download Firmware package

Just follow the on-screen steps for booting your Realme Narzo 60 5G into download mode. Then, hit the “Next” button to proceed with downloading the most suitable firmware package for your Realme Narzo 60 5G.

Step 5: Repair Android phone

Once the software downloads, the program will automatically repair any issues irking over your phone. Now, your phone is all free from contacts error.

Part 2: 9 Common ways to fix “Unfortunately, Contacts Has Stopped”

2.1 Restart Android system

Our response to any minuscule issue is straightaway restarting phone. This helps in clearing out any problem that might have disrupt the functioning of phone. So, to fix the problem of “Contacts app won’t open”, you too can try out your hand in this method.

1. Get hold of your Android system and long press the power button.
2. This will fadeout the main screen and showcase several options from where you’ve to tap on “Reboot/Restart” mode.

Now, your device will quickly reboot the Realme Narzo 60 5G device. Once, the Realme Narzo 60 5G device regains its normal state, check whether the issue is coming again or not.

2.2 Clear cache and data of Contacts app

The cache memory basically stashes the copies of the concerned application. It is indeed a streak of copies of the desired app storing information and incurring additional space on the storage. This might be the reason why the contact app crashes rapidly on your Realme Narzo 60 5G. Hence, it can prove to be a good remedy for this problem. Just follow down the steps mentioned below-

1. First of all, go to “Settings” application from the app drawer or from the notification panel.
2. Now, surf and select for “Applications” or “Apps & notifications”.
3. Here, you need to browse for “Contacts” app and open it.
4. On “Contacts” app, just tap on “CLEAR CACHE” and “CLEAR DATA” button. This will prompt the cache memory to be cleared.

2.3 Wipe cache partition

As we know the cache memories are the temporary files build by the firmware. These are of little importance as they are bound to become a bit more corrupted in nature. And sometimes, may indirectly become a hurdle for the working of contacts app. It is good if the Realme Narzo 60 5G device is cleared off from the caches. Instead of manually wiping down the cache memory, we will understand how to clear off the cache partition in the following steps.

1. From device, just power off your device. Then, press the “Volume Down + Power” button with “Home” combinations together.
2. In a moment’s time, lose fingers from the “Power” button but do not release fingers from “Volume Down” and “Home” buttons.
3. Once you view the “Android System Recovery” screen, just lose the “Volume Down” and “Home” buttons.
4. Over the options available, just opt for “wipe cache partition” by tapping the “Volume down” button until the desired option is highlighted.
5. Finally, push the “Power” key to give consent to the selection.

7. After, the process is through there will be an option for “Reboot System Now”. Tap on it and restart the Realme Narzo 60 5G device.

2.4 Disable Google+ app

The root cause for detecting any problem is not very easy. You never know the overloading of Google + application might have directly impacted contacts app crashes. To resolve it, disabling it may prove to be a helpful solution. Here is the quick reference for disabling Google+ application.

1. First of all, visit “Settings” from your Realme Narzo 60 5G.
2. In “Settings”, visit the “Application Manager” or “Applications” menu and browse for “Google +” app.
3. From the application main page, you can choose to do either of the methods:

• Either, completely disable the application to work by pressing on “Force stop” or “Disable” feature.
• Or, brush away the unnecessary cache piled up on your storage by using “Clear Cache” functionality.

There will be a prompt stating that the application may misbehave. However, you must disable the feature and check whether it worked out for you or not.

2.5 Update your device software

Many a times, we skip updating our device software thinking it is of less importance. In fact, one must not miss out the updates that occurs in phone. As, without the updates, the scope of some applications are affected to some extent. For its better functioning and avoiding issues like “contacts keep stopping”, here is how you should update device software.

1. First and foremost, head on to “Settings” menu. Over there, click on “About Device”.
2. There, you need to tap over “Software Update”.

The device will now check whether there are any updates available for your device. If yes, then update application right away.

2.6 Reset App Preferences

As stated, the malfunctioning of contacts can be due to be any unexpected reason. Hence, users can opt for resetting app preferences. This may prove to be helpful in brushing away the issue of “Contacts app won’t open”.

• Launch “Settings” app and surf for “Apps” or “Applications” option on your Realme Narzo 60 5G.
• Just, tap over the three dots appearing at the upper right section and then tap on “Reset app preferences”.
• At last, just select “Reset default apps”.

2.7 Delete voicemail

Do you happen to exchange voicemails quite often? It can trigger to be the reason for contact app crashes. If your device happens to have a bulk of voicemails, you must get rid of them sooner or later. As, these might standout to be the prime reason for contacts stopping on Realme Narzo 60 5G. If you’re unaware about the procedure of removing all kinds of voicemails, you can proceed to make use of the following steps.

1. Start with, launching the “Google Voice” app.
2. From there, duly opt for “Voicemail”.
3. Just click on the press menu option and at last select “Delete” option.

2.8 Uninstall the downloaded apps

Some applications contain some unwanted advertisements and some elements of malware. This can be enough for disrupting the functionality of the built-in contact app won’t open. It is crucial for your phone to be detoxed from such elements. You need to manually scrap off such applications. Do, ensure to download the application from the genuine source for future use.

• On your Realme Narzo 60 5G, just go to “Home” screen and tap on “Apps” icon.
• Then, tap on “Settings” icon followed by going to “Applications” or “Apps & Preferences” menu.
• After that, tap on “Menu icon” which will showcase the apps installed on device.
• Simply, open the app and hit the “Uninstall” button to brush away that app. Repeat the same with other application(s).

Now, check whether you’ve fought the battle with the problem or not.

2.9 Reset to Factory Settings

Last but not least, if all the methods falls flat to resolve the issue of contacts app won’t open. Then, it might be your device has some internal problem. This can be any software crash which might not be fixing with the aforementioned steps. That is where reset to factory settings may prove to be a good option. With this method, your phone will be cleared of all the components, settings and everything present in it. Here are is the comprehensive tutorial for biding bye to the problem of contacts app won’t open.

Note: Do ensure to take a backup of all the data available in your device. As, we don’t want you to regret afterwards.

• Just go to “Settings” and surf and select “Backup & Reset” option.
• You need to toggle on the option for performing the backup on your Google account.
• Then, tap on “Reset” button and then tick mark the option for resetting your phone.

Also read: