11 Ways to Fix it When My Tecno Spark 20 Won’t Charge

What would you do if your phone or other device’s battery is draining? You will plug it into a power source. Right? What if you realize that your phone won’t charge? My phone won’t charge, and the Tecno Spark 20 tablet won’t charge is a common problem.

Android devices are very prone to this problem, and hence Android device owners complain frequently that My Tecno Spark 20 won’t charge even when it is plugged into a power source properly. The reason behind the phone won’t charge, or Tecno Spark 20 tablet won’t charge are not very complicated and, therefore, can be dealt with by you sitting at home.

A charging problem can occur due to a temporary software crash. It is also possible that a corrupted device cache may be causing such a glitch. Another reason for phones not to charge normally or charge slowly is an inappropriate power source or defective charging cable and adapter. All these and many more problems will be cured in the 10 solutions to fix My Tecno Spark 20 won’t charge error.

So if you’re still thinking about why won’t My Tecno Spark 20 charge, read on to find out solutions to fix My Tecno Spark 20 won’t charge problem.

Any DRM Removal for Mac： Remove DRM from Adobe, Kindle, Sony eReader, Kobo, etc, read your ebooks anywhere.

Part 1. One-click solution to fix Android phone won’t charge

While you are upset over ‘why My Tecno Spark 20 won’t charge?’, would you mind us helping you around?

Well, we have got Dr.Fone - System Repair (Android) at your fingertips to get rid of this annoying phone won’t charge issues (caused by system corruption). Whether the Tecno Spark 20 device froze or became unresponsive, bricked, or got stuck on the Tecno Spark 20 logo/blue screen of death or apps started crashing. It can fix every Android system problem.

Dr.Fone - System Repair (Android)

Easy-to-operate program to fix Android phone won’t charge

• As it supports all the latest Tecno Spark 20 devices, it can even easily fix the Tecno Spark 20 tablet won’t charge issue.
• With a single click, you can fix your entire Android system issues.
• The very first tool is available in the market for Android system repair.
• Without any technical knowledge, one can use this software.
• This tool is intuitive with a high success rate.

3981454 people have downloaded it

Note: When you are stressed over ‘why won’t My Tecno Spark 20 charge’, we are ready to eliminate the tension and make things easier for you. But, before you start fixing the phone won’t charge the problem, make sure to back up the Android device . This fixing process might wipe out all the Tecno Spark 20 device data.

Phase 1: Preparing and connecting the Android device

Step 1: Install and then run Dr.Fone - System Repair (Android), the ultimate Android repair software on your PC. Hit the ‘System Repair’ tab, followed by connecting your Tecno Spark 20.

Epubor Ultimate for Win：Helps you read books anywhere, including the best eBook Converter + eBook DRM Removal functions.

Step 2: Tap on the ‘Android Repair’ option and then click ‘Start’ for moving ahead.

Step 3: Mention the detailed information about your Tecno Spark 20 under the Tecno Spark 20 device information section. Press ‘Next’ then on.

The Tube Sites Submitter is a fast and efficient tool for anyone who needs to upload videos quickly, easily and automatically to hundreds of tube sites in mere minutes .

Phase 2: Get to ‘Download’ mode for repairing the Tecno Spark 20 device

Step 1: It’s essential that you put the Android device under ‘Download’ mode to resolve the phone won’t charge the issue. Here comes how to do –

• With a ‘Home’ button device, switch off it before holding down the set of keys, including ‘Power’, ‘Volume Down’, and ‘Home’ key for 5-10 seconds. Let them go and hit the ‘Volume Up’ key for entering the ‘Download’ mode.

• If the ‘Home’ button is not there, you got to turn down the Tecno Spark 20 device and altogether hold down the ‘Volume Down’, ‘Bixby’, and ‘Power’ keys between 5-10 seconds. Soon after you release the keys, tap the ‘Volume Up’ button for entering the ‘Download’ mode.

Epubor Audible Converter for Mac： Download and convert Audible AAXC/AA/AAX to MP3 with 100% original quality preserved.

Step 2: Click ‘Next’ to start downloading the Android firmware.

Step 3: Now, Dr.Fone - System Repair (Android) would verify the firmware and then start repairing the Android system on its own. It will ultimately fix your ‘why won’t My Tecno Spark 20 charge’ trouble.

DbSchema database designer for all databases, schema design in the team, schema deployment, interactive diagrams, documentation, data and query tools.

Part 2. 10 common ways to fix Android won’t charge

1. Check/replace charging cable

Charging cables fray or become defunct after prolonged usage. Therefore, it is advised to always use the Tecno Spark 20 device’s original charging cable or purchase a good quality charging cord, which doesn’t damage your device or your adapter.

It is also very commonly observed that the charging end of the cable which gets connected to the charging port of the Tecno Spark 20 device gets damaged and prevents the current from flowing to the phone/tablet.

2. Check/clean charging port

The charging port in your device is a small opening where the charging end of the cabbie is inserted for the current to flow to the phone/tablet. Very often, we notice that the charging port gets blocked with tiny particles of dirt. The charging port might also get clogged if dirt and dust get accumulated in it, preventing the sensors from receiving and forwarding the current to the Tecno Spark 20 device.

The best way to take this problem is to clean the port with a blunt pin or a soft bristle unused toothbrush. Make sure you clean the port gently and do not damage it or its sensors.

3. Check/replace charging adapter

This method is fairly simple, and all you need to do is check whether or not the charging adapter is working properly as sometimes, the adapter itself is to be blamed for the charge. To make sure that you are not using a defective adapter, connect your charging cable/USB to another adapter. If your device charges normally, it means there is a problem is with your adapter, and you must replace it at the earliest to solve My Tecno Spark 20 won’t charge the issue.

4. Try another power source

This technique is more like a quick trick. It means to switch from one power source to another or use a more efficient and suitable power source. Laptops and PCs charge slower than a direct power source, i.e., a wall socket. Sometimes, the charging speed is slower, and the battery is draining. In such a scenario, choose to charge your device by directly plugging it into a socket on the wall to never experience My Tecno Spark 20 won’t charge problem.

5. Clear device Cache

Clearing Cache is a great technique as it cleans your device and all its partitions. By clearing the cache, all the unwanted data and files stored in your device get deleted, which may be causing glitches in the Tecno Spark 20 device’s software, preventing it from recognizing the current.

Follow the steps given below to clear your device’s cache:

• Visit “Settings” and find “Storage”

• Now tap on “Cached Data”.

• Click “OK” to clear all unwanted cache from your device as shown above.

Try charging your phone after clearing the cache. If your phone doesn’t charge even now, do not worry. There are more ways to help you combat My Tecno Spark 20 won’t charge problem.

6. Re-start/reboot your phone/tablet

Restarting your device to fix why won’t My Tecno Spark 20 charge error is a very effective remedy. This method of rebooting your device not only fixes software glitches but other but also tackles other factors/operations that might be running in the background preventing your device from charging.

Restarting a device is simple and can be done by following the steps given below:

• Long press the power button of your device.

• From the options that appear, click on “Restart”/ “Reboot” as shown in the image below.

To restart your device, you may also press the power button for about 20-25 seconds for the phone/tablet to automatically reboot.

7. Download and install the Ampere App

The Ampere app can be downloaded from the Google Play Store. It is very helpful to fix the why won’t my charge error as it gives you real-time information about your device’s battery consumption, charging status, and other essential data.

If the App gives information in green color, it means all is wetland your device is charging normally, however, if the information before you is in orange, you need to take steps to fix the charging problem.

OtsAV Radio Webcaster

8. Install software updates

Installing your Android version updates is a good idea as the software is the interface that receives charge from the charging port sensors and gives a command for the phone/tablet to charge. People often continue to use older OS versions, which cause trouble and prevent the Tecno Spark 20 device from charging.

To check for and install updates on your device, you must be connected to WiFi or a cellular network. Next, visit “Settings” and select “About device”. Now click on “Software Update”.

If there is an update available, you will be prompted to download it. Just follow the instructions given before you install a brand new Android OS version on your device.

9. Factory reset your device

Factory Reset is must be done after due deliberation. Remember to take a back-up of all your data and contents on the cloud or an external memory device, such as a pen drive before adopting this method because once you perform a factory reset on your device, all media, contents, data and other files are wiped out, including your device settings.

Follow the steps given below to factory reset your device:

• Visit “Settings” by clicking the settings icon as shown below.

• Now select “Backup and Reset” and move on.

WonderFox DVD Ripper Pro

• In this step, select “Factory data reset” and then “Reset Device”.

• Finally, tap on “ERASE EVERYTHING” as shown below to Factory Reset your device.

Note: Once the factory reset process is complete, your device will automatically restart and you will have to set it up once again.

10. Replace your battery

This should be your last resort to fix My Tecno Spark 20 won’t charge problem, and you should only attempt to replace your battery if none of the other techniques work. Also, please consult a technician before purchasing and installing a new battery in your device as different phones and tablets have a different type of battery requirements.

Finally, fixing the phone won’t charge the problem is simple, and therefore there is no need for you to worry as you are not the only one experiencing such an issue. Other Android users have tried, tested, and recommended the methods given above to solve why won’t My Tecno Spark 20 charge or Tecno Spark 20 tablet won’t charge error. So go ahead and try them out now.

WinUtilities Pro

Top 10 Fixes for Phone Keep Disconnecting from Wi-Fi On Tecno Spark 20

The revolutionized world is about the internet, online life, and social media. You can get all the information you need from the internet. You are a click away from booking tickets, buying groceries, calling your loved ones, or even you can handle office meetings with the internet.

Since everything revolves around the internet, it’s annoying if your WI-FI disconnects. You might question yourself why does my Wi-Fi keep disconnecting from the phone? To know the answer, read the article below.

Part 1: Why Does Your Phone Keep Disconnecting from WiFi?

Is your phone frequently getting disconnected from Wi-Fi? Or the internet service is lagging? We have a few options from which you can inspect your problem. Not all internet issues arise from the service provider, as some issues are because of the Tecno Spark 20 devices that are using the internet. Some of these issues are discussed below for your assistance:

• Router Problems

If the internet provider is doing their job right, the router might not deliver you the right thing. Like other electronic devices, they can also misbehave. This can happen because the router is faulty, or it can happen because the firmware is outdated.

• Out of Wi-Fi Range

Why does My Tecno Spark 20 keep disconnecting from Wi-Fi? It is because you might be out of range! The router’s placement is very important. The router transmits frequencies that have a limited range. If you are moving out of the range, the internet automatically disconnects.

• Wi-Fi Signals Getting Blocked

The signals from the router can dissipate from any other electronic device nearby. Signals like radio and microwaves can interfere with signal strength.

• Devices Connected with Router

Commonly, a house has around a dozen devices connected to the internet router. People do not think that the router has limited connection slots. It is unable to entertain a specific number of requests for service facilitation. The router has limitations; the service quality will drop if the limitations are exceeded. This drop in quality can also cause internet disconnection from devices.

• Unstable Internet

If your Tecno Spark 20 gets disconnected frequently, then this disconnection is due to unstable internet, but apart from the above-mentioned problems, there is another reason for internet disconnection.

Sometimes, the internet is stable, but it still disconnects. This is because the internet service provider might not send the best quality internet you have acquired it for. If your internet is stable and the phone still keeps disconnecting, then head onto the next part that will share the top 10 fixes to sort out this issue.

Part 2: 10 Ways to Fix Wi-Fi Keep Disconnecting on Phone

As we have mentioned earlier if your Wi-Fi is stable, but it keeps disconnecting from Tecno Spark 20 S22 or other Android phones, the coming section of this article is for you. We will provide you with 10 solutions with complete assistance to fix the “Wi-fi keeps disconnecting Android“ issue.

Fix 1: Restart Your Phone

If the Wi-Fi keeps disconnecting from your Tecno Spark 20, but the internet is stable, then you should try to fix the issue by restarting your phone. Sometimes, it’s the phone that’s causing a problem, so to resolve it, you can follow the steps given below:

Step 1: Firstly, unlock your phone. Now, press the Power button and hold it for a few seconds.

Step 2: Now, select the ‘Reboot’ option to resolve the issue from the options on the screen.

Fix 2: Check Router Settings

If your Android keeps disconnecting from Wi-Fi, you can also fix the problem by checking the router settings. This is because your phone might be blocked from connecting to the network, and if this is the scenario, your phone will never maintain the connection. You should check the Router’s admin panel or app to remove your phone from the blocklist.

Fix 3: Reconnect to Network

To fix the annoying problem that your Wi-Fi keeps disconnecting, you should try forgetting the network and then reconnecting to it. This could be done easily by following the steps below:

Step 1: First, you need to open the Wi-Fi settings menu. This could be done by pressing and holding the Wi-Fi option from the drop-down menu of your phone until the settings open up.

Step 2: A list of all the Wi-Fi networks will appear on the screen. Select the network that is causing trouble from that list and hit the ‘Forget Network’ option.

Step 3: After that, you should reconnect to this Wi-Fi network by selecting it from the Wi-Fi list and entering its password.

Fix 4: Restart Your Router

As we discussed, to restart your phone, you can also restart the router to get rid of the problem. For this, hit the restart button on the router to get a fresh start. If the Tecno Spark 20 device has no button, disconnect the power supply and plug it back in to connect again. Most internet issues are resolved by restarting the router.

Fix 5: Forget Old Networks

The problem that your Wi-Fi keeps disconnecting can also occur because of the list of networks you have connected to. Having yourselves connected to different set of networks could turn out to be quite problematic in the process. In the process of finding and switching to the best network, your device’s Wi-Fi will continually disconnect and reconnect with the nearby networks. To finish this irritating issue, you should remove and forget all the extra networks that you connected previously.

Step 1: You should start by pressing and holding the Wi-Fi option from the drop-down menu on your phone until the Wi-Fi settings screen appears.

Step 2: You will see a list of all the Wi-Fi networks you have connected to previously. One by one, select each network and hit the ‘Forget Network’ button to remove it.

Fix 6. Check Recently Installed Applications

Sometimes, different installed applications can also cause trouble. If your Wi-Fi was fine, but suddenly it started disconnecting, then don’t forget to check the recently installed apps. This is because with not knowing the damage it can cause, you might have installed some VPNs, connections boosters, or firewalls. You can try and disable them but if that doesn’t resolve the problem, then uninstall the app.

Step 1: For uninstalling the problematic application, you have to select it and hold it. You will see a pop-up menu of multiple options; choose the option of ‘Uninstall’ to remove the app from the phone.

Fix 7: Reset Network Settings on your Phone

It’s annoying that your Wi-Fi keeps disconnecting while you are working or studying. Android users can easily get over this problem by resetting the network settings. The steps for this fix are as follows:

Step 1: For resetting the network, start by opening the ‘Settings’ menu on your phone. Then, scroll down, look for the ‘Connection & Sharing’ option, and select it.

Step 2: As you progress onto a new screen, you will find the option of “Reset Wi-Fi, Mobile Networks, and Bluetooth” in the menu. Select the option to lead to the next window.


Step 3: Click on the option of “Reset Settings” present on the bottom of the next screen that shows up. Provide confirmation of resetting these settings by inserting your device’s PIN, if any.

DEX 3 RE is Easy-To-Use DJ Mixing Software for MAC and Windows Designed for Today’s Versatile DJ.

Mix from your own library of music, iTunes or use the Pulselocker subsciprtion service for in-app access to over 44 million songs. Use with over 85 supported DJ controllers or mix with a keyboard and mouse. 

DEX 3 RE is everything you need without the clutter - the perfect 2-deck mixing software solution for mobile DJs or hard-core hobbiests. 
PCDJ DEX 3 RE (DJ Software for Win & MAC - Product Activation For 3 Machines)

Step 4: After providing the appropriate clearances, you will be asked for another confirmation of resetting the Tecno Spark 20 device’s networks to default. Click “OK” to execute.

Fix 8: Check Routers Range

If your Wi-Fi automatically disconnects and connects again while you are roaming in the house, then it is because of the router’s range; you should check it. For this, you can consider changing and modifying your AP (Access Point) band on your router.

Although the 5GHz frequency band is recognized for providing better network speeds, this band has a shorter range as compared to the 2.4GHz band, which has a better coverage of area. You can easily shift your router’s range through its configuration page. It is considered optimal to utilize the 2.4GHz frequency band for better ranges.

Fix 9: Stay Connected while Asleep

Most Android phones have a battery-saving feature. This feature disables the network connections to save the battery of the phone. If this is why the Wi-Fi keeps disconnecting, follow the steps shared below to fix it:

Step 1: Start by opening the ‘Settings’ menu on your phone. Then scroll down until you find the ‘Battery’ option and open it.

Step 2: Then, from the battery screen, hit the ‘More Battery Settings’ options. Then, you will see the ‘Stay Connected while Asleep’ option; turn it on.

Fix 10: Upgrade Router Firmware

If none of the above-shared fixes work, the last fix to resolve the problem is upgrading your router firmware. For this, you should contact any professional who knows network operations as upgrading router firmware takes time and requires knowledge.

Wi-Fi Stay Connected

The article above has discussed 10 solutions that offer a comprehensive toolkit to tackle the persistent issue of Wi-Fi keeps turning off Android. By toggling Airplane Mode, restarting your device, adjusting settings, and updating firmware, among other steps, you can effectively address and resolve this connectivity problem. With these solutions at your disposal, you can regain a stable and uninterrupted Wi-Fi experience on your Tecno Spark 20.

Ways to Unbrick Your Android Device: Various Ways for Recovery

When your Tecno Spark 20 becomes unresponsive or frozen after mistakenly flashing a ROM or rooting, you are informed that the phone has been bricked. The most terrifying aspect will not just be gadget loss, but also data erasure. However, what exactly is a bricked phone, and, more importantly, how do you fix a bricked Android phone?

This article will explain what a bricked android phone is, why an Android phone becomes bricked, how to unbrick an Android phone without losing data and a third-party application you can use.

Part 1. Causes of Bricked Phones

In everyday settings, our mobile devices have become our greatest friends, therefore breaking your phone is the last thing you want to do. There are different reasons why devices brick, and we must be familiar with them in order to comprehend the various techniques to repair bricked devices.

Here are some common reasons why your Tecno Spark 20 is bricked:

• **Flashing Stock/Custom ROM:**It is possible that you installed an incompatible ROM in the Android phone, that the phone shuts off during the process, or that you have performed other errors that cause your phone to restart indefinitely or to become stuck at the starting screen.
• **Rooting an Android device:**You are unable to effectively root the Tecno Spark 20 device.
• **Android firmware is being updated:**If the phone is interrupted when updating the Android firmware, it will be bricked.
• **Installing harmful applications:**You installed harmful programs on your Tecno Spark 20, or the phone was infected with a virus.

Part 2. How to Fix a Bricked Phone

The first step is to establish how badly your device is bricked. In most cases, you will be working with soft bricks that are pretty simple to repair. If your phone is stuck in a boot loop or enters recovery mode every time you turn it on, you may have a soft brick.

To repair bricked Android phones and tablets, you must first thoroughly examine the Tecno Spark 20 device’s state. Before you begin troubleshooting, determine the sort of bricking that your phone is experiencing. However, there is no specific software to unbrick your Tecno Spark 20; you may need to learn the complexities of this issue or hire a professional to do it for you.

Recover Now

safe & secure

Here are some simple methods for repairing bricked Android devices:

Method 1. Reboot the Phone in Safe Mode

Trying to reboot your android device in safe mode is the first and easiest thing you should try if your phone is bricked. Here’s how to do it:

• Step 1: Turn off your smartphone and press the Volume Up + Power button to enter recovery mode. Then, using the volume controls, navigate the menu and select Reboot system now.

• Step 2: Select the highlighted option by pressing the Power button. After that, wait for your device to reset normally.
• Note: The steps for booting into recovery mode may change based on the manufacturer of your device. For further information, go to the user manual for your phone or tablet.

Method 2. Wipe the Cache Partition

This is the first indication that a user’s phone has gone bricked. The phone turned on automatically, however it became stuck or frozen on the logo screen. The issue might be caused by the undeleting of data and cache, which prevents the phone from displaying the home screen.

This issue, however, may be resolved by wiping the data and cache partitions in recovery mode. You must do the following to do this:

• Step 1: Turn off your smartphone and enter recovery mode by pressing the Power and Volume Down buttons simultaneously. Different devices have various approaches for entering recovery mode, so you may perform better.
• Step 2: After entering recovery mode, you should see the screen below. Remember to pick Advanced and then “Wipe Dalvik Cache” if your device is under Clockwork Mod recovery. Return to the main screen and select “Wipe Cache Partition” once more.

• Step 3: Finally, on your smartphone, choose the Reboot system immediately.

Method 3. Perform a Factory Reset

A factory reset can undo the alterations made to your device that resulted in the brick phone, but you will lose everything you have downloaded and installed in the process. Here’s how to restore a bricked Android phone to factory settings:

• Step 1: Boot your device into recovery mode (turn off your device, then press power button + volume up button).
• Step 2: Select “Wipe Data/“Factory Reset” then confirm the action. When the process is done, you’ll be returned to the recovery mode menu.
• Step 3: Select “Reboot System Now” to restart your device.

Method 4. Flash a Custom ROM

If you boot your phone directly into recovery mode, there’s a problem with the ROM you loaded. Then simply flash the following custom ROM on your phone:

• Step 1: Save the required ROM (in ZIP format) to an SD card. The SD card should then be inserted into your Tecno Spark 20.
• Step 2: Click the “Install zip from sdcard” button. Then, select the ZIP file that contains the ROM. Finally, click the “reboot system now” button.

Nero Burning ROM:
The ultimate burning program for all your needs!

Method 5. Using Wondershare Dr.Fone to Fix bricked Android Devices

Wondershare Dr.Fone - Data Recovery is the first data recovery solution for any damaged Android smartphone in the globe. It offers one of the greatest recovery rates and can recover a variety of information like images, videos, contacts, messages, and call logs. The program is most effective with Tecno Spark 20 smartphones.

While it is not an Android unbrick tool, it is a useful tool for retrieving data when your Tecno Spark 20 becomes bricked. It is quite easy to use:

• Step 1: Launch Wondershare Dr.Fone and select “Data Recovery” > “Recover Android Data” from the menu. Then, select “****Recover from Broken Phone”.

WPS Office Premium ( File Recovery, Photo Scanning, Convert PDF)–Yearly

• Step 2: Choose the file types you wish to recover. Click “Next” and then select the type of damage your phone is experiencing. Select “Touch screen not responsive, or cannot access the phone” or “Black/broken screen”.

• Step 3: Use the recovery wizard to enter your Android smartphone into Download Mode. Connect your Android handset to the computer after following the instructions to begin automatically analyzing your device.

• Step 4: The program will provide a list of all recoverable files, organized by file type. To preview the file, highlight it. Choose the files you wish to recover and then click “Recover” to save all the data you want to restore.

SwifDoo PDF 2-Year Plan

safe & secure

Part 3. How to Prevent Bricking Your Phone

How to prevent a device from “bricking” itself and how to repair it if it does The delay is set by the MCU, but it should be long enough to allow the debug adapter to connect to the Tecno Spark 20 device and halt it before the Tecno Spark 20 device disables itself.

Here are some things to remember to prevent your device from bricking:

• Avoiding unofficial firmware updates: Installing unapproved OS firmware on your phone will most certainly violate any manufacturer’s warranty you have on it. Read the installation instructions for your unique phone model thoroughly and then carefully follow them, taking time and patience.
• **Being cautious when rooting or jail breaking:**Rooting and Jail breaking disables parts of the operating system’s built-in security mechanisms, which are part of what makes the operating system safe, and your data protected from exposure or damage.
• **Install an antivirus application on your device:**Mobile devices increase the danger of data leaks and breaches. As a result, antiviral software is beneficial on mobile phones. Mobile Device Management is an excellent choice for virus protection on your mobile device.
• Backup your phone data regularly: Backing up your phone safeguards your data in the event that you lose it, it is stolen, or it no longer works. When it comes time to replace your phone, having a backup makes it simple to restore your data to the new device. Furthermore, backing up your phone allows you to organize your data so that it is easier to access.
• Avoid installing apps from untrusted sources: Apps installed from unauthorized sources make your device and personal data more exposed to dangers such as Ransomware. So you should be wary of where you download applications.

Conclusion

It is certainly upsetting when your gadget bricks, but you may attempt the solutions listed above to resolve the issue. Meanwhile, if you want to solve the problem quickly and easily, you can try Wondershare Dr.Fone. It can not only help you repair your Android smartphone, but it can also help you extract data from a bricked device, recover data, and many more Android device solutions!

safe & secure