11 Ways to Fix it When My Tecno Spark 20C Won’t Charge

What would you do if your phone or other device’s battery is draining? You will plug it into a power source. Right? What if you realize that your phone won’t charge? My phone won’t charge, and the Tecno Spark 20C tablet won’t charge is a common problem.

Android devices are very prone to this problem, and hence Android device owners complain frequently that My Tecno Spark 20C won’t charge even when it is plugged into a power source properly. The reason behind the phone won’t charge, or Tecno Spark 20C tablet won’t charge are not very complicated and, therefore, can be dealt with by you sitting at home.

A charging problem can occur due to a temporary software crash. It is also possible that a corrupted device cache may be causing such a glitch. Another reason for phones not to charge normally or charge slowly is an inappropriate power source or defective charging cable and adapter. All these and many more problems will be cured in the 10 solutions to fix My Tecno Spark 20C won’t charge error.

So if you’re still thinking about why won’t My Tecno Spark 20C charge, read on to find out solutions to fix My Tecno Spark 20C won’t charge problem.

Part 1. One-click solution to fix Android phone won’t charge

While you are upset over ‘why My Tecno Spark 20C won’t charge?’, would you mind us helping you around?

Well, we have got Dr.Fone - System Repair (Android) at your fingertips to get rid of this annoying phone won’t charge issues (caused by system corruption). Whether the Tecno Spark 20C device froze or became unresponsive, bricked, or got stuck on the Tecno Spark 20C logo/blue screen of death or apps started crashing. It can fix every Android system problem.

Dr.Fone - System Repair (Android)

Easy-to-operate program to fix Android phone won’t charge

• As it supports all the latest Tecno Spark 20C devices, it can even easily fix the Tecno Spark 20C tablet won’t charge issue.
• With a single click, you can fix your entire Android system issues.
• The very first tool is available in the market for Android system repair.
• Without any technical knowledge, one can use this software.
• This tool is intuitive with a high success rate.

3981454 people have downloaded it

Note: When you are stressed over ‘why won’t My Tecno Spark 20C charge’, we are ready to eliminate the tension and make things easier for you. But, before you start fixing the phone won’t charge the problem, make sure to back up the Android device . This fixing process might wipe out all the Tecno Spark 20C device data.

Phase 1: Preparing and connecting the Android device

Step 1: Install and then run Dr.Fone - System Repair (Android), the ultimate Android repair software on your PC. Hit the ‘System Repair’ tab, followed by connecting your Tecno Spark 20C.

Step 2: Tap on the ‘Android Repair’ option and then click ‘Start’ for moving ahead.

Step 3: Mention the detailed information about your Tecno Spark 20C under the Tecno Spark 20C device information section. Press ‘Next’ then on.

Phase 2: Get to ‘Download’ mode for repairing the Tecno Spark 20C device

Step 1: It’s essential that you put the Android device under ‘Download’ mode to resolve the phone won’t charge the issue. Here comes how to do –

• With a ‘Home’ button device, switch off it before holding down the set of keys, including ‘Power’, ‘Volume Down’, and ‘Home’ key for 5-10 seconds. Let them go and hit the ‘Volume Up’ key for entering the ‘Download’ mode.

• If the ‘Home’ button is not there, you got to turn down the Tecno Spark 20C device and altogether hold down the ‘Volume Down’, ‘Bixby’, and ‘Power’ keys between 5-10 seconds. Soon after you release the keys, tap the ‘Volume Up’ button for entering the ‘Download’ mode.

Step 2: Click ‘Next’ to start downloading the Android firmware.

Epubor Audible Converter for Mac： Download and convert Audible AAXC/AA/AAX to MP3 with 100% original quality preserved.

Step 3: Now, Dr.Fone - System Repair (Android) would verify the firmware and then start repairing the Android system on its own. It will ultimately fix your ‘why won’t My Tecno Spark 20C charge’ trouble.

Part 2. 10 common ways to fix Android won’t charge

1. Check/replace charging cable

Charging cables fray or become defunct after prolonged usage. Therefore, it is advised to always use the Tecno Spark 20C device’s original charging cable or purchase a good quality charging cord, which doesn’t damage your device or your adapter.

It is also very commonly observed that the charging end of the cable which gets connected to the charging port of the Tecno Spark 20C device gets damaged and prevents the current from flowing to the phone/tablet.

2. Check/clean charging port

The charging port in your device is a small opening where the charging end of the cabbie is inserted for the current to flow to the phone/tablet. Very often, we notice that the charging port gets blocked with tiny particles of dirt. The charging port might also get clogged if dirt and dust get accumulated in it, preventing the sensors from receiving and forwarding the current to the Tecno Spark 20C device.

Power Tools add-on for Google Sheets, 12-month subscription

The best way to take this problem is to clean the port with a blunt pin or a soft bristle unused toothbrush. Make sure you clean the port gently and do not damage it or its sensors.

3. Check/replace charging adapter

This method is fairly simple, and all you need to do is check whether or not the charging adapter is working properly as sometimes, the adapter itself is to be blamed for the charge. To make sure that you are not using a defective adapter, connect your charging cable/USB to another adapter. If your device charges normally, it means there is a problem is with your adapter, and you must replace it at the earliest to solve My Tecno Spark 20C won’t charge the issue.

4. Try another power source

This technique is more like a quick trick. It means to switch from one power source to another or use a more efficient and suitable power source. Laptops and PCs charge slower than a direct power source, i.e., a wall socket. Sometimes, the charging speed is slower, and the battery is draining. In such a scenario, choose to charge your device by directly plugging it into a socket on the wall to never experience My Tecno Spark 20C won’t charge problem.

5. Clear device Cache

Clearing Cache is a great technique as it cleans your device and all its partitions. By clearing the cache, all the unwanted data and files stored in your device get deleted, which may be causing glitches in the Tecno Spark 20C device’s software, preventing it from recognizing the current.

Follow the steps given below to clear your device’s cache:

• Visit “Settings” and find “Storage”

• Now tap on “Cached Data”.

• Click “OK” to clear all unwanted cache from your device as shown above.

Try charging your phone after clearing the cache. If your phone doesn’t charge even now, do not worry. There are more ways to help you combat My Tecno Spark 20C won’t charge problem.

Allavsoft Batch Download Online Videos, Music Offline to MP4, MP3, MOV, etc format

6. Re-start/reboot your phone/tablet

Restarting your device to fix why won’t My Tecno Spark 20C charge error is a very effective remedy. This method of rebooting your device not only fixes software glitches but other but also tackles other factors/operations that might be running in the background preventing your device from charging.

Restarting a device is simple and can be done by following the steps given below:

• Long press the power button of your device.

• From the options that appear, click on “Restart”/ “Reboot” as shown in the image below.

To restart your device, you may also press the power button for about 20-25 seconds for the phone/tablet to automatically reboot.

7. Download and install the Ampere App

The Ampere app can be downloaded from the Google Play Store. It is very helpful to fix the why won’t my charge error as it gives you real-time information about your device’s battery consumption, charging status, and other essential data.

If the App gives information in green color, it means all is wetland your device is charging normally, however, if the information before you is in orange, you need to take steps to fix the charging problem.

dotConnect for Oracle is an ADO.NET data provider for Oracle with Entity Framework Support.

8. Install software updates

Installing your Android version updates is a good idea as the software is the interface that receives charge from the charging port sensors and gives a command for the phone/tablet to charge. People often continue to use older OS versions, which cause trouble and prevent the Tecno Spark 20C device from charging.

To check for and install updates on your device, you must be connected to WiFi or a cellular network. Next, visit “Settings” and select “About device”. Now click on “Software Update”.

VSDC Pro Video Editor is a light professional non-linear video editing suite for creating a movie of any complexity. It supports the most popular video/audio formats and codecs, including 4K, HD and GoPro videos. Preconfigured profiles make the creation of videos for various multimedia and mobile devices absolutely hassle-free.

Key features:

• Import from any devices and cams, including GoPro and drones. All formats supported. Сurrently the only free video editor that allows users to export in a new H265/HEVC codec, something essential for those working with 4K and HD.
• Everything for hassle-free basic editing: cut, crop and merge files, add titles and favorite music
• Visual effects, advanced color correction and trendy Instagram-like filters
• All multimedia processing done from one app: video editing capabilities reinforced by a video converter, a screen capture, a video capture, a disc burner and a YouTube uploader
• Non-linear editing: edit several files with simultaneously
• Easy export to social networks: special profiles for YouTube, Facebook, Vimeo, Twitter and Instagram
• High quality export – no conversion quality loss, double export speed even of HD files due to hardware acceleration
• Stabilization tool will turn shaky or jittery footage into a more stable video automatically.
• Essential toolset for professional video editing: blending modes, Mask tool, advanced multiple-color Chroma Key

If there is an update available, you will be prompted to download it. Just follow the instructions given before you install a brand new Android OS version on your device.

9. Factory reset your device

Factory Reset is must be done after due deliberation. Remember to take a back-up of all your data and contents on the cloud or an external memory device, such as a pen drive before adopting this method because once you perform a factory reset on your device, all media, contents, data and other files are wiped out, including your device settings.

Follow the steps given below to factory reset your device:

• Visit “Settings” by clicking the settings icon as shown below.

• Now select “Backup and Reset” and move on.

• In this step, select “Factory data reset” and then “Reset Device”.

• Finally, tap on “ERASE EVERYTHING” as shown below to Factory Reset your device.

Note: Once the factory reset process is complete, your device will automatically restart and you will have to set it up once again.

10. Replace your battery

This should be your last resort to fix My Tecno Spark 20C won’t charge problem, and you should only attempt to replace your battery if none of the other techniques work. Also, please consult a technician before purchasing and installing a new battery in your device as different phones and tablets have a different type of battery requirements.

Finally, fixing the phone won’t charge the problem is simple, and therefore there is no need for you to worry as you are not the only one experiencing such an issue. Other Android users have tried, tested, and recommended the methods given above to solve why won’t My Tecno Spark 20C charge or Tecno Spark 20C tablet won’t charge error. So go ahead and try them out now.

WPS Office Premium ( File Recovery, Photo Scanning, Convert PDF)–Yearly

Restore Missing App Icon on Tecno Spark 20C: Step-by-Step Solutions

The growing conversation around the missing app icons on Android issue has caught our attention. While it seems confusing, it’s a problem that some Android users have encountered.

After all, the presence of app icons on our Android device’s home screen is important for convenient access to our frequently used applications. When your Tecno Spark 20C’s icons suddenly disappear, it can leave you feeling lost about how to use and access your apps.

No worries, though. We’ve got you covered with a simple guide in this article. Just follow the steps, and you’ll get those missing app icons back on your Tecno Spark 20C.

Part 1: Make Sure if the Missing App Is Installed

Before proceeding with troubleshooting the missing app icon on your Android device, it’s essential to confirm whether the app is still installed or if it has been accidentally deleted. To do it, you can have a quick check on Google Play:

• Step 1: Go to the Play Store.
• Step 2: Tap your Google profile at the top right and find Manage apps and devices.
• Step 3: Open Manage and select the “Installed” tab.

Now, see whether you can find the app icon that disappeared on your Android. If you can’t find it, it means the app has been accidentally deleted, and you can install it back on your device. However, if it’s confirmed to be installed on your Android but remains missing from your home screen, you can continue the following practice.

Part 2: How To Find the Missing App Icon on Android

“All my apps disappeared from my home Android screen. What should I do?”

If you’ve confirmed that the missing app is installed, but its icon is nowhere to be found on your home screen, don’t fret—there are several solutions you can take to locate and restore the missing app icon on Android.

1. Check hidden apps

How could the Android phone icon be missing? Well, app icons can disappear from your home screen for different reasons. One of the common reasons is you might have accidentally hidden it in your phone. To find and check whether the app is hidden, the steps can be different depending on the phone model you are using.

However, as a general guide, you can follow these steps:

• Step 1. Go to your phone’s Settings.
• Step 2. Use the search bar to look for “Hidden app.”
• Step 3. Once you find the “Hidden app” settings, watch the list to see if the missing app is there. If it is, you can toggle off the switch to unhide it.

2. Move the app to the home screen from the App Drawer

If your app icon disappeared on your Android, you can also easily restore it by adding the app to the home screen from the app drawer. Follow the step-by-step guide below:

• Step 1. Open the App Drawer on your Android. To do this, swipe from the bottom to the top, starting from your home screen. The App Drawer is where all your installed apps are neatly listed.
• Step 2. Once you open the App drawer, locate the app icon that has disappeared from your home screen. For example, you lost the phone icon on Android. Then, look for the phone icon from the App Drawer.
• Step 3. Long-press the Icon of the missing app and move it to the desired location on your home screen. You can drag it to an empty space or a specific folder.
• Step 4. Release to drop the app icon onto the home screen.

Power Tools add-on for Google Sheets, Lifetime subscription

3. Re-enable disabled app

App icons can also disappear on the Android home screen if you unintentionally or intentionally disable them. Certain phone models even offer a functionality known as ‘Freezer,’ allowing users to temporarily halt the apps. While in a frozen state, the app remains inactive and doesn’t appear on the home screen until you unfrozen it.

To re-enable the disabled app, you can follow the steps here:

• Step 1. Open the Apps & Notifications on the Settings.
• Step 2. Select the app which icon is missing on your home screen. For example, tap the phone app if the phone icon disappears on your Android.
• Step 3: In the App Info, tap Enable.

4. Reset Android to factory settings

If the previous methods don’t work, you might need to do a factory reset on your Tecno Spark 20C. But before doing that, it’s important to back up your data first because a factory reset will clear all your data and cache when you press the reset button.

How to reset Android to factory setting:

• Step 1: Go to your Android Settings.
• Step 2: Select Backup and Reset > Factory data reset. Then, choose to erase all data.

Please be mindful that performing a factory reset on Android will reset your Android completely to its initial state.

Part 3: How to Fix System Error on Android Easily with Reliable Software

Missing app icons on Android can sometimes be a result of errors in your Android system launcher, causing inconvenience and potential disruptions to your device’s operation. To address this issue effectively, you can turn to Dr.Fone’s advanced system repair tool. This tool is designed to handle various system issues, providing an easy and reliable solution.

How to fix the Android system using Dr.Fone’s system repair tool:

• Step 1. Open the Repair Tool

Start by launching Wondershare Dr.Fone on your computer. Go to the Toolbox section and connect your Tecno Spark 20C. Choose System Repair and pick Android as your device type.

EmEditor is a fast, lightweight, yet extensible, easy-to-use text editor, code editor, CSV editor, and large file viewer for Windows. Both native 64-bit and 32-bit builds are available, and moreover, the 64-bit includes separate builds for SSE2 (128-bit), AVX-2 (256-bit), and AVX-512 (512-bit) instruction sets. New versions support AI-assisted writing.

safe & secure

4,136,839 people have downloaded it

• Step 2. Begin Repair

Click Start on the new screen to kick off the repair. Since you’re dealing with the Android system, select System Damage.

• Step 3. Fill in the Tecno Spark 20C device Details

The platform will detect your Tecno Spark 20C’s brand. Confirm the Name, Model, Country, and Carrier. If your device is unlocked, choose OPEN in the Carrier section. Agree to the warning, click Next, and proceed with the repair.

PDF application, powered by AI-based OCR, for unified workflows with both digital and scanned documents.

• Step 4. Activate Download de

Follow the instructions to put your Tecno Spark 20C into Download Mode. Once you are in Download Mode, the firmware will be downloaded automatically.

• Step 5. Confirm Installation

Remember, the repair may erase data. It’s advisable to back up your data first before starting the repair. Enter “000000” to confirm the repair process, shown by a progress bar. Once finished, click Done and see if your phone has returned to normal.

More Articles About Android System:

9 Solutions for Android Process System isn’t Responding Error

How to Fix Android App Not Installed Error Quickly?

Authentication Error Occurred? Here Are 10 Proven Fixes

Conclusion

When the app disappears from the home screen of your Android, it can hinder your ability to access and use the app efficiently. There are several reasons why an app might disappear from your Android home screen, and addressing the issue depends on the specific circumstances.

Whether it’s due to accidental deletion or a system glitch, we have discussed various methods to recover the missing app and ensure smooth functionality in this article. In cases of system-related issues on your Tecno Spark 20C, it’s advisable to rely on trustworthy software such as Dr. Fone’s system repair tool for a comprehensive resolution.

Home Button Not Working on Tecno Spark 20C? Here Are Real Fixes

There is no doubt that it is quite frustrating when your device buttons, such as home and back don’t work properly. The reasons can be software as well as hardware issues. If you are wondering whether there is any solution to fix this problem, then you’ve come to the right place. Firstly, yes some methods can probably help you to come out of this issue. Here, in this guide, we have covered various solutions you can try to resolve the “home button not working Android” problem no matter whether it is due to software or hardware reason.

Part 1: 4 Common Measures to Fix Home Button Not Working Android

Here, we are going to mention four common methods that you can try to resolve the home button problem on your Tecno Spark 20C with ease.

1.1 One click to fix Android Home Button Not Working

[Try It Free](https://download.wondershare.com/drfone_repair_full3371.exe)

When it comes to the home button not working Tecno Spark 20C problem, the most common reason is the unknown system issues. In such a scenario, the best solution is using Dr.Fone - System Repair (Android) software to repair your Android system to normal in one click. This tool is powerful enough to resolve various Android issues within a few minutes.

Dr.Fone - System Repair (Android)

Android repair tool to fix home button not working on Android

• The tool can help you to fix the Android operating system in a wide range of scenarios.
• It is compatible with all Tecno Spark 20C devices.
• There is no need for technical skills to use the software.
• The software comes with a high success rate for fixing the Android system.
• It provides easy steps to resolve Android issues.

3981454 people have downloaded it

To learn how to fix home button not working problem, download and install the Dr.Fone - System Repair (Android) software on your computer, follow the below step-by-step guide:

Step 1: To begin with the process, launch the software on your computer and select the “System Repair” option from the software main window.

Step 2: Thereafter, connect your Tecno Spark 20C to the computer using a USB cable and select the “Android Repair” tab from the left menu.

Step 3: Next, you will navigate to a device information page where you have to provide your device information.

Step 4: After that, the software will download the appropriate firmware to repair your Android system.

Step 5: After downloading the firmware, the software will start the repair process. Wait for a few seconds, the problem should get fixed and your phone will get back to its normal state.

1.2 Force Restart your Android

Whenever you encounter with Android virtual soft keys, not working problem, the first thing you should try is to force restart your phone . If the problem is due to a software issue, then it can be probably fixed by simply force restarting your Android.

Here are simple steps on how to force restart on Android:

Step 1: To begin with, press and hold the power button and either volume up or down button at the same time until your device screen goes off.

Step 2: Next, press the power button for a few moments to force restart your device.

1.3 Restore Factory Settings

If force restarting won’t help you to fix the problem you are facing, it’s time to reset your Tecno Spark 20C to factory settings. The factory reset on an Android device will erase all of your phone settings, third-party apps, user data, and other app data to restore your device to its original manufacturer condition or settings. It means that this can bring back your device to its normal state.

To learn how to restore factory settings, follow the below steps:

Step 1: Go to your ‘Settings” and then, go to “System”>” Advanced”>” Reset options”.

Step 2: Next, tap on “Erase all data”>” Reset phone” to factory reset on your phone. Here, you may need to enter the password or pin or pattern.

Once you are done with the above steps, restart your phone and restore your data and this might be fixed the problem for you. If not, then try the next solution.

1.4 Update Android Firmware

It might be the case that your Android firmware is not updated and that’s why you are experiencing the home button not working Android problem. Sometimes, not updating your Android firmware can cause various issues and problems while using your device. So, you should update it, and here are steps on how to do it:

Step 1: Open the Settings and then, go to “About device”. Next, click “System updates”.

Step 2: After that, click “Check for updates” and if updates are available, then download and install it to update your Android version.

Part 2: What if the Home Button fails due to hardware reasons?

When your Android home and back button not working because of hardware reasons, you can’t get the problem resolved by simply rebooting your device. In such cases, you have to use alternative apps to replace the home button.

2.1 Simple Control app

The Simple Control app is the first and foremost solution to fix the Android home button not working issue. With the help of this app, you can fix many soft keys of your device. It is specially designed for Android users facing trouble using home, volume, back, and camera buttons. Plus, the app utilizes Accessibility service, but it doesn’t get access to your sensitive and personal information.

Pros:

• It can easily replace broken and failed buttons.
• The app is quite easy to use.

Cons:

• It is not as much efficient as other similar apps available out there.

URL: https://play.google.com/store/apps/details?id=ace.jun.simplecontrol&hl=en_US

2.2 Button Savior app

Button Savior app is one of the ultimate apps that can help you to fix the Android home button not working problem with ease. For this app, root and no root versions are available on the Google Play store. To fix the Home button not working issue, no root version is the right one. But, if you want to fix the Back button or other buttons, then you need to go for the root version.

Pros:

• It comes with a root as well as no root version.
• The app is powerful enough to fix a wide range of buttons.
• It shows information regarding the date and time and battery.

Cons:

• The root version of the app can cause data loss.

URL: https://play.google.com/store/apps/details?id=com.smart.swkey" target="_blank” rel=”nofollow

2.3 Navigation Bar (Back, Home, Recent Button) app

Navigation Bar app is another great solution to fix the home button not responding problem. It can replace broken and failed button for users who are facing difficulty using navigation bar panel or buttons not working properly. The app offers numerous features, and it is easy to use.

Take advantage of PREMIUM features for 12 months.
Create your texts / logos without any limitation.
No attribution required when downloading.
No advertising on the website.
TextStudio.com PREMIUM - Yearly Membership

Pros:

• It offers many colors to make an incredible navigation bar.
• The app provides 15 themes for customization.
• It comes with the ability to change the size of the navigation bar.

Cons:

• Sometimes, the navigation bar stopped working.
• It comes with ads.

URL: https://play.google.com/store/apps/details?id=nu.nav.bar

2.4 Home Button app

Home button app is another remarkable solution to replace broken and failed home buttons for users having trouble while using buttons. With this app, it is quite easy to press or even long press on the home button as assistive touch.

Pros:

• You can change the button of color using the app.
• With the help of it, you can set a vibrate setting on touch.
• It provides support for many press actions, such as home, back, power menu, etc.

Cons:

• It doesn’t come with a lot of features, unlike other apps.
• Sometimes, it shuts down automatically.

URL: https://play.google.com/store/apps/details?id=nu.home.button

Click here

### 2.5 Multi-action Home Button app

Is your Android physical home button is broken or dead? If yes, then the Multi-action Home Button app can help you to fix it with ease. With the help of it, you can create a button in centre-bottom of your device screen, and you can also add numerous actions to that button.

Pros:

• It provides various actions with the button.
• It is very simple and easy to use.

Cons:

• The app’s very useful feature comes with its pro version.

URL: https://play.google.com/store/apps/details?id=com.home.button.bottom

Conclusion

Hopefully, the methods covered in this post helps you to fix Android home and back button not working problem for you. If it is a system issue, then the best thing you can do is to take advantage of Dr.Fone - System Repair (Android) software. It can surely help you to fix your Android system to normal within a few minutes.