11 Ways to Fix it When My Tecno Spark Go (2023) Won’t Charge

What would you do if your phone or other device’s battery is draining? You will plug it into a power source. Right? What if you realize that your phone won’t charge? My phone won’t charge, and the Tecno Spark Go (2023) tablet won’t charge is a common problem.

Android devices are very prone to this problem, and hence Android device owners complain frequently that My Tecno Spark Go (2023) won’t charge even when it is plugged into a power source properly. The reason behind the phone won’t charge, or Tecno Spark Go (2023) tablet won’t charge are not very complicated and, therefore, can be dealt with by you sitting at home.

A charging problem can occur due to a temporary software crash. It is also possible that a corrupted device cache may be causing such a glitch. Another reason for phones not to charge normally or charge slowly is an inappropriate power source or defective charging cable and adapter. All these and many more problems will be cured in the 10 solutions to fix My Tecno Spark Go (2023) won’t charge error.

So if you’re still thinking about why won’t My Tecno Spark Go (2023) charge, read on to find out solutions to fix My Tecno Spark Go (2023) won’t charge problem.

Part 1. One-click solution to fix Android phone won’t charge

While you are upset over ‘why My Tecno Spark Go (2023) won’t charge?’, would you mind us helping you around?

Well, we have got Dr.Fone - System Repair (Android) at your fingertips to get rid of this annoying phone won’t charge issues (caused by system corruption). Whether the Tecno Spark Go (2023) device froze or became unresponsive, bricked, or got stuck on the Tecno Spark Go (2023) logo/blue screen of death or apps started crashing. It can fix every Android system problem.

Dr.Fone - System Repair (Android)

Easy-to-operate program to fix Android phone won’t charge

• As it supports all the latest Tecno Spark Go (2023) devices, it can even easily fix the Tecno Spark Go (2023) tablet won’t charge issue.
• With a single click, you can fix your entire Android system issues.
• The very first tool is available in the market for Android system repair.
• Without any technical knowledge, one can use this software.
• This tool is intuitive with a high success rate.

3981454 people have downloaded it

Note: When you are stressed over ‘why won’t My Tecno Spark Go (2023) charge’, we are ready to eliminate the tension and make things easier for you. But, before you start fixing the phone won’t charge the problem, make sure to back up the Android device . This fixing process might wipe out all the Tecno Spark Go (2023) device data.

Phase 1: Preparing and connecting the Android device

Step 1: Install and then run Dr.Fone - System Repair (Android), the ultimate Android repair software on your PC. Hit the ‘System Repair’ tab, followed by connecting your Tecno Spark Go (2023).

Step 2: Tap on the ‘Android Repair’ option and then click ‘Start’ for moving ahead.

Step 3: Mention the detailed information about your Tecno Spark Go (2023) under the Tecno Spark Go (2023) device information section. Press ‘Next’ then on.

Phase 2: Get to ‘Download’ mode for repairing the Tecno Spark Go (2023) device

Step 1: It’s essential that you put the Android device under ‘Download’ mode to resolve the phone won’t charge the issue. Here comes how to do –

• With a ‘Home’ button device, switch off it before holding down the set of keys, including ‘Power’, ‘Volume Down’, and ‘Home’ key for 5-10 seconds. Let them go and hit the ‘Volume Up’ key for entering the ‘Download’ mode.

• If the ‘Home’ button is not there, you got to turn down the Tecno Spark Go (2023) device and altogether hold down the ‘Volume Down’, ‘Bixby’, and ‘Power’ keys between 5-10 seconds. Soon after you release the keys, tap the ‘Volume Up’ button for entering the ‘Download’ mode.

Step 2: Click ‘Next’ to start downloading the Android firmware.

Step 3: Now, Dr.Fone - System Repair (Android) would verify the firmware and then start repairing the Android system on its own. It will ultimately fix your ‘why won’t My Tecno Spark Go (2023) charge’ trouble.

Part 2. 10 common ways to fix Android won’t charge

1. Check/replace charging cable

Charging cables fray or become defunct after prolonged usage. Therefore, it is advised to always use the Tecno Spark Go (2023) device’s original charging cable or purchase a good quality charging cord, which doesn’t damage your device or your adapter.

It is also very commonly observed that the charging end of the cable which gets connected to the charging port of the Tecno Spark Go (2023) device gets damaged and prevents the current from flowing to the phone/tablet.

2. Check/clean charging port

The charging port in your device is a small opening where the charging end of the cabbie is inserted for the current to flow to the phone/tablet. Very often, we notice that the charging port gets blocked with tiny particles of dirt. The charging port might also get clogged if dirt and dust get accumulated in it, preventing the sensors from receiving and forwarding the current to the Tecno Spark Go (2023) device.

The best way to take this problem is to clean the port with a blunt pin or a soft bristle unused toothbrush. Make sure you clean the port gently and do not damage it or its sensors.

3. Check/replace charging adapter

This method is fairly simple, and all you need to do is check whether or not the charging adapter is working properly as sometimes, the adapter itself is to be blamed for the charge. To make sure that you are not using a defective adapter, connect your charging cable/USB to another adapter. If your device charges normally, it means there is a problem is with your adapter, and you must replace it at the earliest to solve My Tecno Spark Go (2023) won’t charge the issue.

4. Try another power source

This technique is more like a quick trick. It means to switch from one power source to another or use a more efficient and suitable power source. Laptops and PCs charge slower than a direct power source, i.e., a wall socket. Sometimes, the charging speed is slower, and the battery is draining. In such a scenario, choose to charge your device by directly plugging it into a socket on the wall to never experience My Tecno Spark Go (2023) won’t charge problem.

5. Clear device Cache

Clearing Cache is a great technique as it cleans your device and all its partitions. By clearing the cache, all the unwanted data and files stored in your device get deleted, which may be causing glitches in the Tecno Spark Go (2023) device’s software, preventing it from recognizing the current.

Follow the steps given below to clear your device’s cache:

• Visit “Settings” and find “Storage”

• Now tap on “Cached Data”.

• Click “OK” to clear all unwanted cache from your device as shown above.

Try charging your phone after clearing the cache. If your phone doesn’t charge even now, do not worry. There are more ways to help you combat My Tecno Spark Go (2023) won’t charge problem.

6. Re-start/reboot your phone/tablet

Restarting your device to fix why won’t My Tecno Spark Go (2023) charge error is a very effective remedy. This method of rebooting your device not only fixes software glitches but other but also tackles other factors/operations that might be running in the background preventing your device from charging.

Restarting a device is simple and can be done by following the steps given below:

• Long press the power button of your device.

• From the options that appear, click on “Restart”/ “Reboot” as shown in the image below.

To restart your device, you may also press the power button for about 20-25 seconds for the phone/tablet to automatically reboot.

7. Download and install the Ampere App

The Ampere app can be downloaded from the Google Play Store. It is very helpful to fix the why won’t my charge error as it gives you real-time information about your device’s battery consumption, charging status, and other essential data.

If the App gives information in green color, it means all is wetland your device is charging normally, however, if the information before you is in orange, you need to take steps to fix the charging problem.

8. Install software updates

Installing your Android version updates is a good idea as the software is the interface that receives charge from the charging port sensors and gives a command for the phone/tablet to charge. People often continue to use older OS versions, which cause trouble and prevent the Tecno Spark Go (2023) device from charging.

To check for and install updates on your device, you must be connected to WiFi or a cellular network. Next, visit “Settings” and select “About device”. Now click on “Software Update”.

If there is an update available, you will be prompted to download it. Just follow the instructions given before you install a brand new Android OS version on your device.

9. Factory reset your device

Factory Reset is must be done after due deliberation. Remember to take a back-up of all your data and contents on the cloud or an external memory device, such as a pen drive before adopting this method because once you perform a factory reset on your device, all media, contents, data and other files are wiped out, including your device settings.

Follow the steps given below to factory reset your device:

• Visit “Settings” by clicking the settings icon as shown below.

• Now select “Backup and Reset” and move on.

• In this step, select “Factory data reset” and then “Reset Device”.

• Finally, tap on “ERASE EVERYTHING” as shown below to Factory Reset your device.

Note: Once the factory reset process is complete, your device will automatically restart and you will have to set it up once again.

10. Replace your battery

This should be your last resort to fix My Tecno Spark Go (2023) won’t charge problem, and you should only attempt to replace your battery if none of the other techniques work. Also, please consult a technician before purchasing and installing a new battery in your device as different phones and tablets have a different type of battery requirements.

Finally, fixing the phone won’t charge the problem is simple, and therefore there is no need for you to worry as you are not the only one experiencing such an issue. Other Android users have tried, tested, and recommended the methods given above to solve why won’t My Tecno Spark Go (2023) charge or Tecno Spark Go (2023) tablet won’t charge error. So go ahead and try them out now.

Bricked Your Tecno Spark Go (2023)? Here’s A Full Solution

A bricked phone is a device that won’t turn on no matter what you do and everything you try to do to fix it doesn’t work. Most people will tell you that there is really nothing you can do to fix a bricked device. But with the right information, the right buttons to push and useful additional software you can actually try to fix a bricked device.

In this article we are going to look at how you can fix your device if you are sure it is bricked, how to rescue the data on your bricked device and even how you can avoid this situation in the future.

Part 1: Rescue the data on your Bricked Android Phone

Before we can learn how to fix a bricked device, it is important that you are able to save the data that is on the Tecno Spark Go (2023) device. Having the data saved somewhere else will be the added insurance you need in case anything goes wrong during the process. There are very few software solutions in the market to help you get back data from a bricked device. One of these and the most reliable is Wondershare Dr.Fone - Data Recovery (Android) .

Dr.Fone - Data Recovery (Android)

World’s 1st Android smartphone and tablet recovery software.

• Recover data from broken Android in different situations.
• Scan and preview files before starting the retrieval process.
• SD card recovery on any Android devices.
• Recover contacts, messages, photos, call logs, etc.
• It works great with any Android devices.
• 100% safe to use.

4,771,974 people have downloaded it

How to Use Dr.Fone - Data Recovery (Android) to Rescue Data from a Bricked Android

If your device is completely unresponsive, don’t worry Dr.Fone can help you get all the data back. Simply follow these steps to gain access to the Tecno Spark Go (2023) device and recover all your data.

Step 1: Download and install Wondershare Dr.Fone to your PC. Launch the program and then click on Data Recovery. Select the data types you would like to recover and then click on Next.

Step 2. Select the issue type for your phone. Choose from “Touch screen not responsive or cannot access the phone” or “Black/broken screen”.

Step 3: In the next step, you need to select your device model. If you don’t know the model of your device click on “How to check the Tecno Spark Go (2023) device model” to get help.

Step 4: The next screen will provide instructions on how to enter “Download mode.” Connect the Tecno Spark Go (2023) device to your PC once it is in “Download Mode”

Step 5: The program will begin an analysis of your device and then download the recovery package.

Step 6: Then Dr.Fone will display all the recoverable file types. You can click on the files to preview them. Select the ones you need and click on “Recover to Computer” to save them to your computer.

Part 2: How to Fix Your Bricked Android Phone

Android devices are usually very flexible in allowing users to flash ROM but sometimes an incorrect process can result in a bricked device. While there are few solutions to this problem, here are a few things you can do;

When the Tecno Spark Go (2023) device Boots Straight into Recovery

If the Tecno Spark Go (2023) device can boot to the recovery screen, you can find an alternative ROM to install and copy it your device. Installation can then be done in the recovery menu. If the Tecno Spark Go (2023) device is booting to recovery mode there is a chance that it can be fixed.

Step 1: Load up Clockworkmod or any other recovery tool that you have been using.

Step 2: Once you are in, navigate to the “Reboot system now.” If you are using Clockworkmod, this should be your first option. Hopefully everything will work just right if you do this, If it doesn’t you may need to download and re-flash the ROM again.

When the Tecno Spark Go (2023) device won’t stop rebooting

Here’s what to do if the Tecno Spark Go (2023) device wont stop rebooting.

Step 1: Turn off the Tecno Spark Go (2023) device and then reboot in recovery mode.

Step 2: Go to “Advanced” which will bring up a number of options to choose from.

Step 3: One of the options should be “Wipe Dalvik cache” select this option and then follow the instructions. When finished select “Go Back” to return to the main menu.

Step 4: Go to the “Wipe Cache Partition” and select it.

Step 5: Go to “Wipe data/ factory reset.”

Step 6: Finally reboot the Tecno Spark Go (2023) device by selecting “Reboot system now.” This should fix the problem. You may also want to flash the same ROM or try a new one.

If the above methods don’t work, try one of the following options.

You can return to resource where you found the flash tools and search or ask for advice

Sometimes these errors can be caused if the ROM installation was performed via SD card. In this case reformatting the SD card might help.

If all else fails, it is time to returning the Tecno Spark Go (2023) device to the vendor if your warranty is still applicable.

Part 3: Useful Tips to avoid Bricking your Android Phone

If you are planning on installing custom ROM you need to install Custom Recovery. This will enable you restore the Tecno Spark Go (2023) device to its original settings should anything go wrong and hopefully help you avoid bricking your device.

1. Ensure that you are familiar with the Fastboot or ADB commands before doing anything. You should know how to recover your device by flashing a command line and also manually transfer important files to your device.
2. Make a backup of your device. This is obvious but most people fail to adhere to it. At the very least you can get back all your files and settings to transfer to a new phone.
3. Keep a full Nandroid backup on your phone
4. Keep another backup on your PC which you can access should anything go wrong with the Custom ROM installation
5. Know how to hard reset your device. It may come in handy when your device freezes on you.
6. You should also consider enabling USB debugging. This is because many solutions for a Bricked device rely on USB debugging.
7. Ensure the Custom ROM you choose can actually be used on your device model.

While installing Custom ROM can actually be a great way to customize your device, it is also the leading reason for bricked devices. Therefore ensure that you understand what you are doing when you decide to customize your device. Learn as much as you can about the process before attempting everything.

How To Deal With the Tecno Spark Go (2023) Screen Black But Still Works?

With the advance of technology over the years, many of us rely on smartphones to communicate, work, and play. As such, it can be pretty concerning when your device begins to act strange like your phone screen suddenly went blank.

Whether you’re using an iPhone or an Android device, you’ll eventually encounter a problematic symptom like this. Therefore, this article will explore what to do when your phone screen goes black. After exploring below, you’ll learn the common causes of why your phone screen went black and how to fix it. Read on below to learn more.

Part 1: Why Did My Tecno Spark Go (2023) Screen Go Black but Still Works? Common Causes

Experiencing a cell phone blank screen is not exclusive to Android or iOS users. A phone screen not turning on happens all the time due to several factors that may or may not be out of your control. While they can be frustrating, here are some common causes you should know as to why your phone screen went black but still works.

A Drained Battery

The first thing that comes to mind when your phone screen suddenly goes black is you have a drained battery. Even though this is obvious, it’s still important to mention, as this is usually what most people encounter. To fix this problem, plug your smartphone into a charger and wait for your device to turn on again. If it works, then you just prevented a rather annoying experience.

App Troubles

If your phone is working, but the screen is black, there’s also a high probability that you are having an isolated issue with a particular application. An app could be loading something, which often happens for streaming apps such as YouTube, Netflix, Prime, and more, especially if you have slow internet connectivity.

Software Issues

A potential reason why your phone screen went black but still works could be because of your smartphone’s software. This problem suggests that your Tecno Spark Go (2023) is crashing, potentially freezing your device if not addressed immediately. If this is the cause, then your device is likely experiencing a critical system error, and you should directly try to reboot your phone.

Hardware Problem

If you dropped your phone, there’s a high chance the LCD connectors went loose due to the physical impact. If this happened to you, the phone might be working, but the screen is black due to the LCD cable dislodging. Another issue could be your phone got exposed to extreme temperatures. This can also cause a black screen but your phone is still on.

Part 2: How To Fix Black Screen on Your Phone

Here are four valuable methods you should know on what to do when your phone screen goes black on your iPhone or Android smartphone to get them working again.

Method 1: Force Restart your Android/iOS Smartphone

If your phone screen is black but still works, force restarting it is the easiest way to fix it. The following are the detailed steps for both Android and iOS devices.

How to Force Restart your Android Device

Here is how you force restart an Android device when your phone screen doesn’t turn on.

Step 1: Press and hold the Power and Volume Down buttons simultaneously.

Step 2: Hold the same buttons until your device restarts, and display the phone’s logo.

How to Force Restart your iOS Device

If you own the latest iPhone models, here are the method of restarting it from iPhone 8 up to 14.

Step 1: Press and immediately release Volume Up. Next, press and immediately release Volume Down.

Step 2: Press and hold Sleep/Wake until you see the Apple logo.

Note

If you own an iPhone 7, press and hold the Side button and Volume Down simultaneously until you see the apple logo.

Method 2: Uninstall or Update Outdated Applications

In some cases, your phone screen is black but still works because of installing incompatible apps on your iOS/Android device. If the installed app is frequently crashing, it may be the source of a blank cell phone screen. Uninstall the problem app to see if the black screen disappears or not.

Method 3: Inspect the LCD Connectors

If your phone screen goes black but still works, you should inspect the logic board to the LCD screen to see if it has become disconnected. It is common for smartphones that often get dropped a few times. It’s best to plug the connectors back to regain your screen’s functionality.

However, this requires technical know-how. It’s better to seek help from a professional as you could risk causing more damage to your device if you don’t know what you’re doing.

Method 4: Perform a Factory Reset

If all the methods above did not solve your problem, the last resort you can take is to perform a Factory Reset. This method works on Android and iOS smartphones and erases all your data. It is the quickest way to try to fix why your phone screen went black. Here are the steps.

For Android Users

If you’re on Android, tap Settings > Backup and Reset. Tap on Factory data reset > Delete all to initiate the factory reset.

If you cannot do this, here’s how to perform a factory reset manually using Recovery Mode.

Note

The process of booting into Recovery Mode is not the same across all Android devices and depends on the manufacturer and model of your phone. Refer to your owners manual to see which method is the right one for your Tecno Spark Go (2023).

Step 1A: Press and hold the Power button and Volume Down buttons simultaneously and continue holding until the screen starts.

Step 1B: For Android devices with a Home button, press and hold the Home button and the Power button and continue holding until the screen starts.

Step 1C: Press and hold the Power button as well as the Volume Up and Volume Down buttons simultaneously and continue holding until the screen starts.

Step 2: Use the Volume buttons to navigate the choices and select Wipe data/factory reset and confirm your choice with the Power button.

Step 3: Simply wait for the process to complete and wait for your Tecno Spark Go (2023) to restart automatically.

F****or iOS Users

Step 1: For iOS users, meanwhile, tap Settings > General > Transfer or Reset iPhone.

Step 2: Next, choose Erase All Content and Settings. Check the list of items you want to remove.

Step 3: Tap Continue and enter your iPhone passcode. A message warns you that the process will delete all media and data and reset all settings.

Step 4: Tap Erase iPhone to confirm. You’ll be asked to type in your Apple ID and password if Find My is active. Enter your password and tap Erase.

Part 3: How To Fix Black Screen Phone With an Alternative

If your phone screen went black but still works and doing the methods above did not solve the issue, you can use Wondershare Dr.Fone for iOS and Android as a last resort. It’s one of the most popular smartphone repair tools today, enabling you to fix all kinds of annoying scenarios. These include black screen, boot loop, white screen of death, bricked iOS or Android device, and more.

Key Features

Dr.Fone – System Repair for iOS and Android has fantastic features you can immediately take advantage of. Here are its key features below.

• Fix all Android and iOS Problems in Minutes

Dr.Fone – System Repair can fix all kinds of issues on your Android/iOS, such as a black screen, white screen of death, screen freeze, boot loop, or recovery mode. All of this can be done within less than 10 minutes to save you precious time.

• Supports up to 1000+ Android Smartphones and the latest iOS

All iOS versions, including the latest iOS 16 and iOS 16 beta, are fully supported by Dr.Fone – System Repair. The app handles all your smartphone issues without data loss to secure your info. On the other hand, if you own an Android, the app supports up to 1000+ Android smartphones, making it highly versatile for Android owners.

Tech Specs

Dr.Fone – System Repair (Android)’s minimum system requirements for your computer are listed below.

Computer OS	Android
Windows 11, 10, 8.1, 8, 7	Android 2.1 and up to the latest

Meanwhile, here are the system requirements for Dr.Fone – System Repair (iOS).

Computer OS	iOS
Windows 11, 10, 8.1, 8, 7	Supports all iOS versions, including the latest iOS 16 and iOS 16 beta
macOS 12, 11, 10.15, 10.14, 10.13, 10.12, 10.11, 10.10, 10.9, 10.8

Pros and Cons

If you’re still undecided about Dr.Fone – System Repair, here are its pros and cons.

Pros

• Fone – System Repair for iOS and Android has a clutter-free and beginner-friendly user interface. It’s easy to understand and use, so you can start immediately.
• Both the iOS and Android versions finish the repair tasks within less than 10 minutes to save you time.

Cons

• Each version for each OS is sold separately.
• The free version works up to your device’s compatibility. Once you start the repair process, the app will ask you for a valid license key.

How to Fix Black Phone Screen With Dr.Fone – System Repair

Here’s how to fix your phone screen with Dr.Fone – System Repair on iOS/Android.

Step 1: Download and install Dr.Fone – System Repair for iOS or Android. Next, open the program and connect your smartphone.

Step 2A (For iOS): Choose the correct model of your iPhone for the program to be able to download the appropriate firmware package.

Step 2B (For Android): Click Start. On the next window, choose the Brand, Name, Model, Country, and Carrier of your smartphone, then click Next.

Step 3: Follow the on-screen instructions provided on the main program window and wait for the repair process to complete.

safe & secure

4,262,204 people have downloaded it

Conclusion

Our increasing reliance on smartphones has led to amazing advancements in new technologies. However, lingering issues such as your phone screen not turning on or your phone screen being black but still working are ongoing problems to many. That’s why learning how to prevent these events is essential to take care of your smartphone.

Doing all the recommended methods above usually solves the case. If the different fixes don’t work for you, Dr.Fone – System Repair for iOS and Android can help resolve all your problems within less than 10 minutes. You can download it for free on Windows and Mac to test it yourself.

Also read: