7 Fixes for “Unfortunately, Phone Has Stopped” on Tecno Spark 10 5G

Encountering issues with the Phone app is never welcoming. Being one of the useful apps, seeing it crashing and unresponsive gives sheer despondency. If talked about the triggering points, they are numerous. But the central point is what to do when the Phone app keeps crashing. In this article, we have discussed this issue in detail. To know this and more about why the “Unfortunately, Phone has stopped” error crops up, read this article and get the problem sorted on your own.

Part 1: When can the “Unfortunately, Phone has stopped” error come?

First things first! You need to stay updated on why the Phone app keeps stopping or crashing before jumping to any solution. Following are the points when this error comes up to annoy you.

• When you install a custom ROM, the issue might occur.
• The upgrading of the software or incomplete updates can lead to crashing the Phone app.
• Data crashes can be another reason why this error shows up.
• Infection through malware and virus on your phone is also included when the Phone app might crash.

Part 2: 7 Fixes for the “Unfortunately, Phone Has Stopped” error

2.1 Open the Phone app in Safe Mode

First and foremost, the thing that can let you get rid of this trouble is Safe Mode. It is a feature that will end any excessive background functioning of the Tecno Spark 10 5G device. For instance, your device will be able to run sans any third-party apps when in Safe mode. Since the important functions and the naïve apps will be running on the Tecno Spark 10 5G device, you will get to know if it’s really a software glitch or not by running the Phone app in Safe mode. And this is the first solution we would recommend you make use of when the Phone app has stopped. Here is how to enable Safe Mode.

1. Switch off the Tecno Spark 10 5G phone first.
2. Now keep pressing the “Power” button until you see the Tecno Spark 10 5G logo on the screen.
3. Release the button and immediately press and hold the “Volume Down” key.
4. Leave the key once the Tecno Spark 10 5G device is in Safe mode. Now, the third-party apps will be disabled and you can check if the Phone app is still not responding or everything is fine.

2.2 Clear the cache of the Phone app

The cache should be cleaned timely if you want any app to work properly. Due to the constant usage, the temporary files get collected and may corrupt if not cleared. Hence, the next solution you should try when the Phone app keeps stopping is to clear the cache. Here are the steps to be performed.

1. Open “Settings” on your device and go to “Application” or “Apps”.
2. Now from the list of all applications, go to “Phone” and tap on it.
3. Now, click on “Storage” and choose “Clear Cache”.

Epubor Ultimate for Mac:Helps you read books anywhere, including the best eBook Converter + eBook DRM Removal functions.

2.3 Update Google Play services

Since Android is created by Google, there must be some Google Play services that are crucial to run several system functions. And if attempting the previous methods isn’t of any use, try updating Google Play services when you find the Phone app stopped. For doing this, you need to make sure that automatic updates are turned on in Google settings. If not, enable it and get the apps including Google Play services updated for smoother functions.

2.4 Update the Tecno Spark 10 5G firmware

When the firmware is not updated, it may conflict with some apps and maybe that’s why your Phone app falls prey. Therefore, updating Tecno Spark 10 5G firmware will be a sane step that should be taken when the Phone app has stopped. Follow the below-mentioned steps and then check if the Phone app is opening or not.

1. Open “Settings” and go to “About Device”.
2. Now tap on “Software Updates” and check for the availability of the new update.

WinUtilities Pro

1. Download and install it and then try to use the Phone app.

2.5 Clear partition cache

Here is another resolution for the “Unfortunately Phone has stopped” error. Clearing the partition cache will remove the whole cache of the Tecno Spark 10 5G device and make it work like before.

1. Switch off your device to begin with and enter the recovery mode by pressing the “Home”, “Power” and “Volume Up” buttons.
2. The recovery mode screen will appear now.
3. From the menu, you need to choose “Wipe Cache Partition”. For this, you can use the Volume keys to scroll up and down.
4. To select, press the “Power” button.
5. The process will begin and the Tecno Spark 10 5G device will restart post it. Check if the problem still persists or it is finished. If unfortunately not, get to the next and the most productive solution.

2.6 Get the Tecno Spark 10 5G system repaired in one click

If still, the Phone app keeps stopping after trying everything, here is the most effective method that can surely help you. Dr.Fone - System Repair (Android) is a one-click tool that promises to repair Android devices hassle-free. Be it apps crashing, the black screen, or any other issue, the tool has no problem fixing any sort of issue. Here are the benefits of Dr.Fone - System Repair (Android).

Dr.Fone - System Repair (Android)

Android repair tool to fix “Unfortunately, Phone Has Stopped” on Tecno Spark 10 5G devices.

• It takes no special skills to operate it and fairly works to bring the Android system to normalcy.
• It shows great compatibility with all Tecno Spark 10 5G devices and other Android phones supporting over 1000 Android brands.
• Fixes any kind of Android issue without any complication.
• Easy to use and trusted by millions of users and therefore has a higher success rate.
• Can be downloaded freely and friendly user interface.

3,106,444 people have downloaded it

How to fix crashing Phone app using Dr.Fone - System Repair (Android)

Step 1: Get the Software Installed

Click the “Start Download” button to download the tool on your computer, and then open the program to begin the repair, click on “System Repair”.

Click here


Step 2: Plug the Phone with PC

Take your original USB cord and then connect your Tecno Spark 10 5G to the computer. When the Tecno Spark 10 5G device is connected, click on “Android” from the two tabs > click “Start”

Easy and Safe Partition Software & Hard Disk Manager

Step 3: Enter the Details

As the next step, enter some important details on the next screen. Be sure to enter the right name, brand, and model of the Tecno Spark 10 5G device. When done everything, verify once and click on “Next”.

Step 4: Downloading Firmware

Downloading firmware will be the next step. Prior to this, you have to go through the instructions given onscreen to enter the DFU mode. Please click on “Next” and the program will bring the suitable firmware version and start downloading it.

Step 5: Get the Tecno Spark 10 5G device Repaired

When you see the firmware has been downloaded, the issue will begin to get resolved. Hang on and wait until you get notified for the repair of the Tecno Spark 10 5G device.

safe & secure

2.7 Factory reset

If none of the above methods worked for you, the last resort you are left with is a factory reset. This method will wipe everything from your device and make it function like normal. We also suggest you make a backup of your data if it is important so as to prevent the loss. Here is how to do this to fix the crashing Phone app.

1. Open “Settings” and go to the “Backup and Reset” option.
2. Look for “Factory data reset” and then tap on “Reset phone”.
3. Within a while, your device will go through resetting and boot up to normalcy.

safe & secure

[Solved] Warning: Camera Failed on Tecno Spark 10 5G

In this article, you will learn why camera fails on Tecno Spark 10 5G devices, how to make camera work again, as well as a system repair tool to fix this issue in few clicks.

Tecno Spark 10 5G devices are one of the best Android devices available in the market and their users are always satisfied with their features. However, it is a recent observation that many Tecno Spark 10 5G users complain about Tecno Spark 10 5G camera failed error while using the camera App on the Tecno Spark 10 5G device. It is a strange error and pops up suddenly with only one option to tap on, i.e., “OK”

The error message reads as follows: “Warning: Camera Failed”.

Once you click on “OK” the app shuts down abruptly and your Tecno Spark 10 5G camera is failed. We understand this is not a very pleasing situation, thus, here are ways to tackle the camera failed Tecno Spark 10 5G issue. Let us now move ahead and find out why exactly you experience Warning: Camera Failed error and how to fix it.

Part 1: Why Tecno Spark 10 5G phone has Warning: Camera Failed error?

We are all aware that no device runs smoothly, without any glitches. We also know that there is a cause behind every problem. Listed below are a few reasons behind camera failed error, especially on Tecno Spark 10 5G devices:

1. If you have recently updated your OS version, there are chances that certain bugs are preventing the camera App from functioning normally. Also, if the update is interrupted and not downloaded completely, certain apps may suffer.
2. There are chances of your internal storage being cluttered with unwanted Apps and files leaving no space for the camera App to save its data and work smoothly.
3. If you haven’t cleared camera Cache and Data, the chances of the App to get clogged up increase tremendously which disrupt its working.
4. Warning: Camera Failed error can also be a direct outcome of a change in the system settings or the Tecno Spark 10 5G device’s internal settings.
5. Finally, if you tamper a lot with the camera settings and do not update the App whenever it is available, Tecno Spark 10 5G Camera App will not be efficient.

There might be much more reasons for the camera failed error, but these are the most obvious ones. Now let us now move on to troubleshooting the problem.

Part 2: How to fix Tecno Spark 10 5G Camera Failed in One Click?

If you are experiencing some kind of issues in your Tecno Spark 10 5Gs such as Tecno Spark 10 5G camera failed, the Tecno Spark 10 5G device stopped working, black screen, play store not working, etc. There is a special software is designed for such kind of issues in Android devices, i.e. dr. fone. The tool enables the users to fix various kinds of issues in the Tecno Spark 10 5G devices and perform a complete system repair so the Tecno Spark 10 5G device starts working normally.

DbSchema database designer for all databases, schema design in the team, schema deployment, interactive diagrams, documentation, data and query tools.

Dr.Fone - System Repair (Android)

One-click solution to fix camera failed on Tecno Spark 10 5G devices

• The tool has a one-click operation which makes it super easy to use.
• You don’t need any technical skills expertise to operate the software.
• The software supports all the Tecno Spark 10 5G devices including the latest and older ones.
• The software can fix the “warning camera failed”, the app is crashing, failed update, etc.

4,616,396 people have downloaded it

Note: You have to remember that the system repair may erase all the Tecno Spark 10 5G device data. So, create a backup of your Tecno Spark 10 5G data first and then try fixing the Tecno Spark 10 5G phone.

Follow the steps given below and fix the camera failed error:

Step 1. Download the software on your computer and launch it. Connect your device and select the System Repair option from the main interface. In the next screen, select Android Repair module.

Step 2. You will have to provide the Tecno Spark 10 5G device details accurately to ensure that the software provides a precise firmware package to be downloaded. Enter brand, name, model, country, and carrier of your device and agree to the terms and condition.

Step 3. Now put your device in the download mode. The software will provide you with a guide to put the phone in download mode to begin the downloading process.

PCDJ DEX 3 for Windows & MAC is the total entertainment DJ software solution, offering audio, video, and karaoke mixing ability. Automatic beat-sync, smart looping, 4 decks, DJ MIDI controller support, Karaoke Streaming and much more.
DEX 3 meets the demands of today’s versatile DJ, without compromise!
DEX 3 (Audio, Video and Karaoke Mixing Software for Windows/MAC | 3 Activations and Free Updates)

Step 4. As soon as the firmware is downloaded, the software will automatically initiate the repair process. You will be able to see the ongoing repair.

EmEditor Professional (Lifetime License, non-store app)

When the software is done repairing the system, you will be notified. Thus, the Camera failed Tecno Spark 10 5G error in your phone will be fixed.

Part 3: How to fix Camera Failed error by clearing camera data?

Has anyone ever informed you that it is absolutely necessary to keep clearing camera data every once in a while? Yes, since it deletes all unnecessary data stored in respect of the App and no, it does not mean that all your photos and videos will get deleted. Just follow the steps given below to clear camera data:

1. First, visit “Settings’” on your Tecno Spark 10 5G device and select “Apps” or Application Manager”.

2. Now a list of all Apps will appear before you. Keep scrolling down until your find “Camera”.

Tap on “Camera” to open the “Camera Info” screen and once you are there, hit “Clear Data” option as shown below.

That’s all, now return to the Home Screen and access the camera again. Hopefully, it will work now.

## Part 4: How to fix Camera Failed error by removing third-party Apps?

Another tip to fix Tecno Spark 10 5G camera failed error is by deleting a few unwanted third-party Apps (recently installed) to free some space in the Tecno Spark 10 5G device’s internal storage. It is essential to create and keep storage space for the camera App to function smoothly and allow it to store its data as well. Also, if this issue only happens recently, it might be some newly installed Apps causing some glitches with the camera.

Simply, follow the instructions given below to remove Apps from Tecno Spark 10 5G Devices:

1. Click on the “Settings” icon on the Home Screen and from the options before you, select “Apps”/ “Application Manager”.

2. You will see that a list of downloaded and built-in Apps will open up before you as follows.

3. Now, once you select the App you want to uninstall, the App Info screen will appear. Tap on “Uninstall” option and then tap on “Uninstall” again on the pop-up message.

The App will be removed immediately and its icon will disappear from the Home Screen and you will notice an increase in the storage capacity of your device.

Part 5: How to fix Camera Failed error by wiping Cache Partition?

This method might seem tedious and time-consuming and you may also lose your data and essential settings. However, wiping the Cache Partition only cleans your device system internally and gets rid off any unwanted and trouble making elements causing Warning: Camera Failed error. Follow the step-by-step guide given below to clean Cache Partition smoothly:

1. Firstly, switch off the Tecno Spark 10 5G device by pressing the power button and tapping on “Power Off” as shown in the screenshot below. Then wait for the lit screen to turn off completely before proceeding further.

2. Now, press and hold the power on/off, home and volume up button simultaneously. Your device will now vibrate. This a signal to let go of the power button (only).

3. Once the Recovery Screen appears, leave all buttons and use the volume down key till you reach “Wipe Cache Partition”.

4. Now, to select the option to use the power on/off button and wait for the process to get over. Once this done, tap on “Reboot system now” and see that your device restarts normally.

You may try to use the camera app once the process completes.

Part 6: How to fix Camera Failed error by Reset Settings?

Resetting the camera settings solves the problem 9 out of 10 times and thus is worth a try.

1. To reset, first, launch the Camera App by tapping on its icon.

2. Then go to Camera “Settings” by tapping on the circular gear like icon.

3. Now look for “Reset Settings” options and click on it.

Once done, go back to the Home Screen and start the camera App again to use it.

Part 7: How to fix Camera Failed error by Factory Reset?

Lastly, if the above-mentioned techniques do not help you in fixing the camera failed error, you can consider performing a Factory Reset. Note: This method will delete all your saved data so it is advised to backup before you start the process.

Here are the steps to factory reset your device to fix “Warning: Camera Failed” Error:

1. Start by visiting “Settings” on your Tecno Spark 10 5G device on which the camera has failed.

2. Now from the list of options before you, select “Backup and reset” and move ahead.

3. Now you must first select “Factory data reset” and then tap on “Reset Device” as shown in the screenshot below.

4. Finally, you have to click on “Erase Everything” and wait for the Tecno Spark 10 5G device to reboot itself.

Note: You will have to set up your Tecno Spark 10 5G device from scratch once it is reset, however, that is a small price to pay to fix your Camera App.

Warning: Camera Failed error is not a rare phenomenon and many users experience it on daily basis. So, there is no need to panic, All you need to do is carefully follow the instructions given above and repair your Camera App yourself. You do not need to seek any technical assistance for the same as the camera failed issue is not difficult to deal with. So go ahead and try these tricks to enjoy using the Camera App on your Tecno Spark 10 5G devices.

9 Solutions to Fix Process System Isn’t Responding Error on Tecno Spark 10 5G

The “Process system isn’t responding” is a common error that occurs in almost every kind of Android device. Even though most Android smartphone manufacturers have taken a huge leap in the last few years, the operating system still suffers from a few pitfalls. The process system isn’t responding Android is one of those errors that have been reported plenty of times. I definitely understand encountering the ‘Process System Isn’t Responding’ error on your Tecno Spark 10 5G can be frustrating.

However, there are several straightforward methods to resolve this issue. This article will provide a step-by-step guide on how to fix the problem and restore your device to normal functionality.

Before solving any Android system issues, try this Android backup software to take a full backup, in case any data loss happens.

Part 1: Reasons for process system isn’t responding error

There could be plenty of reasons for getting the process system is not responding in Android.

1. Software Glitch: Android systems may experience temporary glitches due to factors like memory management issues, conflicts between apps or services, or system updates.
2. Insufficient System Resources: Low system storage is another reason for getting the error. If you have too many apps on your phone, then it might take a toll on its memory and generate the “process system isn’t responding” prompt.
3. Third-Party Apps: Users have also complained that they receive the “Android process system is not responding” error after installing a new app. If you have installed an app from a source other than Google Play Store, then the chances are that you can get this error. Though, even after installing an app from Play Store, there is a bleak probability of facing this issue as well.
4. Outdated Software: Using outdated apps, particularly system apps or critical components, may lead to compatibility issues with the latest Android version.
5. System Updates: Most of the time, it happens whenever a device is restarted after updating its Android version. Your device could have undergone a bad update or might have had an unsupported driver. This can result in the occurrence of process system not responding issue.
6. Corrupt Cache Files: Corrupted cache files can lead to conflicts and result in error.
7. Overclocking or Modifications: Rooting or modifying the Android device, or applying overclocking settings, can lead to instability and the process system not responding error.
8. Hardware Issues: Rarely, hardware problems like failing components can interfere with the proper functioning of the system.

No matter what the cause is, there are plenty of ways to overcome this issue. We have listed a handful of them in this post.

Part 2: How to Fix Android Process Not Responding? 8 Fixes

When this error occurs, it can disrupt the normal operation of the Tecno Spark 10 5G device, causing apps to freeze or crash. Fortunately, there are several effective methods to address this problem.

SwifDoo PDF 2-Year Plan

Fix 1: Restart your device

This is one of the easiest ways to resolve the process system not responding error. If you are getting this error on your phone, then try to manually restart your device. The way to restart your phone might differ from one device to another. Mostly, it can be done by long-pressing the power button. This will provide different power options. Tap on the “Reboot” one to restart your phone.

If it won’t work, then long press the Power and Volume up buttons at the same time until the screen goes off. Afterward, use the power button again to turn it on.

Fix 2: Reset App Preferences

Sometimes the apps interfere with the Tecno Spark 10 5G device’s settings because they were given permission to access specific functions. It is recommended to allow the asked permission precisely because some suspicious apps can also steal your sensitive data. Here are the straightforward instructions you need to follow to reset the app preferences:

Proceed to the “Apps and Notifications” settings from the Settings app. Next, tap the “See All Apps” option and access the “Three Dots” menu. Here select the “Reset App Preferences” option and confirm the process from the confirmation pop-up.

Fix 3: Free Up Space to Make Sure Android Have Enough Internal Memory

In case the Android internal memory is completely filled, it will slow down the processing speed of the Tecno Spark 10 5G device. Internal memory is vital for the Tecno Spark 10 5G device to run all the background apps or the process required by the OS to run the Tecno Spark 10 5G device efficiently. You can follow these steps to free up some space on your Tecno Spark 10 5G:

Step 1: Open the Settings app on your Tecno Spark 10 5G and access the “Battery and Device Care” option by scrolling down. Next, tap on the “Three Dots” from the top right corner and choose the “Storage Booster” feature.

Step 2: Following this, you can select the data you want to remove from the internal memory. Your device will show the space it will free up for you, and you can press the “Free Up” button to free up the storage.

FX PRO (Gold Robot + Silver Robot(Basic Package))

vMix Basic HD - Software based live production. vMix Basic HD includes 4 inputs, 3 cameras, streaming, recording, playlist.
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

Fix 4: Enter Safe Mode to Uninstall Suspicious Apps

This issue can also occur if you have installed an app from the Google Play Store with a very low rating or an APK. Unlike Apple App Store, anyone can easily upload their mobile apps on Play Store, so it is important to check the app’s credibility before installing it. Following are the simplified instructions to enter the safe mode and delete all suspicious applications:

Press and hold the “Power” button of your Android and press and hold the “Power Off” option to access the “Safe Mode” feature. Afterward, confirm to enter the safe mode and remove all the suspicious apps from the Tecno Spark 10 5G device. You can do this by holding on to the app and selecting the “Uninstall” option from the pop-up options.

Fix 5: Update All Apps on your Device

Updating the apps is crucial for any Android device to work with high efficiency and performance. Apps are developed to make the users’ daily tasks easy to execute. However, there might be some negligence in the development, which can leave some bugs in the app. These bugs are fixed with time by releasing the new version of the app. To update your Android app, proceed with the following step-by-step instructions:

Step 1: Locate the Play Store from the Android home screen and access it. Then, tap the “Profile” icon from the top right corner and proceed to the “Manage apps and devices” option. Afterward, you can check how many app updates are available from the “Updates available” option. To update the apps, you will have to go inside this option.

Step 2: You can tap on the “Update All” button if you want to update all the apps one by one. Otherwise, you can press the “Update” option adjacent to each app name to update the frequently used ones.

Fix 6: Check the SD card

If you are still getting the process system isn’t responding to Android error, then chances are that there could be an issue with your SD card. Firstly, check if your SD card is working fine or not. If it is corrupted, then get another memory card for your phone. Also, it should have a prominent amount of free storage. You might be facing this issue if the SD card has limited free space.

Also, if you are storing apps on the SD card, then your phone might encounter the process isn’t responding issue whenever you run a respective app. Therefore, you should move apps from your SD card to the phone’s internal memory. To do this, go to your phone’s Settings > Application Manager and select any app. If the app is stored on the SD card, then you will get an option of “Move to devise storage”. Just tap on it and manually move every app to your device storage.

Fix 7: One click to fix the process system isn’t responding error

If all the above tricks don’t get your device out of the process system not responding state, then there may be some system issues on your Android. In this case, an Android repair can successfully fix issues like process system isn’t responding.

Note: Android repair may wipe out existing Android data. Back up your Android data before going on.

Dr.Fone - System Repair (Android)

Android repair tool to fix all Android system issues in one click

• Fix all Android system issues like the black screen of death, system UI not working, etc.
• One-click for Android repair. No technical skills are required.
• Supports all the new Tecno Spark 10 5G devices like Galaxy S8, S9, S22, etc.
• Step-by-step instructions are provided. Friendly UI.

3981454 people have downloaded it

Follow the easy steps below to fix process system isn’t responding error:

• 1. Download and install the Dr.Fone tool. Then select “System Repair” from the main window.

• 2. Connect your Tecno Spark 10 5G to the PC. After the Tecno Spark 10 5G device is detected, select the “Android” tab.

• 3. Select and confirm the correct device details of your Android. Then boot your Tecno Spark 10 5G in download mode and proceed.

vMix HD - Software based live production. vMix HD includes everything in vMix Basic HD plus 1000 inputs, Video List, 4 Overlay Channels, and 1 vMix Call
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

• 4. Download the firmware and click “Fix Now”.

• 5. After a while, your Android will be repaired with the “process system isn’t responding” error fixed.

Epubor Audible Converter for Win： Download and convert Audible AAXC/AA/AAX to MP3 with 100% original quality preserved.

Take advantage of PREMIUM features for 12 months.
Create your texts / logos without any limitation.
No attribution required when downloading.
No advertising on the website.
TextStudio.com PREMIUM - Yearly Membership

safe & secure

Fix 8: Factory reset Android

It is always considered the most used way to factory reset your phone in order to resolve the process system not responding error. Though, this should be your last resort, as it will wipe off your device’s data entirely. Even if you are performing a factory reset, make sure that you back up your data by using a reliable tool like Wondershare Dr.Fone .

Wondershare Dr.Fone

Flexibly Back up and Restore Android Data

• Back up Android data to the computer with one click.
• Preview and restore selectively the backup to any Android device.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restoration.

3,981,454 people have downloaded it

If your phone is functioning, then you can easily factory reset it by visiting Settings > General > Backup & Restore and selecting the option of “Factory Data Reset”. Your device will display a warning regarding all the data files that would be lost or un-synced. Just tap on the “Reset” button to factory reset your device.

Click here


If your device is not functioning or locked, then you can perform the factory reset operation by putting your phone into Recovery mode. Most of the time, it can be done by pressing the Power and Volume up button simultaneously for at least 10 seconds. Though, the key combinations might change from one device to another.

PDF application, powered by AI-based OCR, for unified workflows with both digital and scanned documents.

After entering the Recovery mode, go to the “wipe data/factory reset” option using the Volume up and down button. Use the Power button to make a selection. If you get an additional message, then select the “yes – delete all data” option. When it is done, you can simply reboot your device.

Fix 9: Unroot the Tecno Spark 10 5G device

It has been further discovered that the process system isn’t responding error is more common in rooted devices. Therefore, if you also have a rooted Android device, then you can choose to unroot it in order to fix this issue. There are different ways to unroot an Android device. One of the easiest ways to do it is by using the SuperSU app.

You can always download either SuperSU or SuperSU Pro app from its website here . Simply install it on our device and launch it whenever you wish to unroot it. Visit its “Settings” tab and select the option of “Full unroot”.

This will generate a warning message regarding all the repercussions of the unrooting process. Just tap on “Continue” to initiate the process.

If you are using an older version of Android, then you might get another pop-up to restore boot images. Simply make the desired selection and start the process. After a while, your device would be restarted the usual way, and it would be unrooted. Most probably, this will resolve the process system isn’t responding error as well.

Now that you know different ways to fix the process system not responding error, you can easily overcome this issue and make the most out of your device. Simply start with the easy fixes, and if they don’t work, then take extreme measures like unrooting your device or restoring it to factory setting. Also, make sure to back up your data before taking any extreme measures.