8 Workable Fixes to the SIM not provisioned MM#2 Error on Lava Yuva 3

SIM cards are small chips that act as a connecting medium between your cell phone and your carrier. It is programmed to help your carrier identify your cell phone account with certain information. And eventually, you are enabled to make calls and to make use of mobile internet. Now, if your device is showing “SIM not provisioned” on Android then it signifies that the connection to carrier network cannot be established or perhaps, your carrier isn’t able to identify your cell phone account.

Part 1. Why does the error “SIM not provisioned MM#2” pop up?

There can be numerous reasons behind the pop up that reads “SIM not provisioned” on Android. But basically, it most probably affects the users who have registered a new SIM card. If you get to experience this issue in other situations or if the SIM is not working in Android, then the problem is with the SIM card and needs to be replaced. Anyways, here is a list of situations when the “SIM not provisioned” error may bother you.

• You got a new SIM card for your new phone.
• You are transferring your contacts into the new SIM card.
• In case, the carrier network provider’s authorization server is unavailable.
• Perhaps, you’re out of the reach of the carrier coverage area and that too, without active roaming agreement.
• Though new SIM cards work flawlessly. But it is often necessary to get your SIM card activated due to security reasons.

Just in case, you haven’t bought any new SIM card and the one you were using was working fine until now, then the most probable reasons behind it could be listed below:

• If your SIM card is too old, possibly it might have gone dead, try replacing it.
• Perhaps, the SIM card was not properly inserted into the slot or there might be some dirt between the SIM and smartphone pins.

A yet another reason could be that your SIM card got deactivated by your carrier provider as it could have been locked to a particular phone. Now, if you insert such a SIM card to another device or a new device even, you may get to witness a message that reads “SIM not valid”.

2.1 One click to fix the “SIM not provisioned MM#2” error on Android

Without talking any further, let’s straightly get to the first and the easiest way to repair SIM not provisioned issue on Android. For this purpose, we’re glad to introduce Dr.Fone - System Repair (Android) , one of its kind of tool that is capable of repairing almost all sort of Android OS issues in just a matter of few clicks. Whether it is SIM not provisioned on Android or SIM not working in Android or your device stuck in a boot loop or black/white screen of death. The most probable reason for these errors is Android OS corruption. And with Dr.Fone – Repair (Android) you can efficiently and effectively repair your Android OS in a hassle freeway.

Dr.Fone - System Repair (Android)

Android repair tool to fix “SIM not provisioned MM#2” error

• Fix any type of Android system issue with ease.
• Even novice users can use it without any hassle.
• Compatible with all major Lava Yuva 3 smartphone models.
• Highest success rate in the market for fixing Android issues.
• Supports all Android OS versions.

3981454 people have downloaded it

Step by step Tutorial to fix “SIM not provisioned MM#2” error

Step 1. Connect your Lava Yuva 3

Download and launch the Dr.Fone toolkit on your computer and then opt for the “System Repair” option from the main interface. Meanwhile, get your Lava Yuva 3 connected with the computer using a genuine cable.

Step 2. Opt for Android Repair and key in important information

Now, hit on the “Android Repair” from the 3 options on the left, followed by hitting the “Start” button. From the upcoming screen, you’ll be asked to key in important device-related information, like brand, model, country, and carrier details. Hit “Next” afterward.

Step 3. Boot your device in Download mode

You must put your device in Download mode for better repairing of your Android OS. Simply follow the onscreen guide to boot your Android in DFU mode and hit “Next” thereafter. Once done, the software will automatically start downloading the most compatible and recent firmware for your device.

Step 4. Initiate Repairing

As soon as the download completes, the software verifies the firmware and automatically initiates repairing your Lava Yuva 3. Within a short period, you’ll notice that your Lava Yuva 3 has been successfully repaired.

safe & secure

2.2 Ensure the SIM card is not dirty or wet

At times, the issue can be as simple as cleaning your SIM card and SIM slot properly. Ensuring that SIM is not wet either and then putting it back into its place. If this works, then the SIM not working in Android was due to the dirt or moisture that was preventing proper contact between SIM card pins and smartphone circuit.

2.3 Insert the SIM card correctly

If your SIM card was working properly until yet, there is a good possibility that the SIM card may have moved a bit from its actual location. Eventually, there is poor contact between the SIM card pins and the circuit. Try inserting your SIM card properly with the following steps.

• Power off your Lava Yuva 3 and with the help of Q pin, eject the SIM card holder from the SIM slot of your device.
• Now, grab a soft rubber pencil eraser and gently rub it in on the gold pins of SIM card to clean them properly. Then, with the help of a soft cloth wipe away the rubber residue from the SIM card.
• Next, push the SIM back into the SIM card holder properly and push it back into the SIM slot now.
• Turn your device back on and look if your SIM not provisioned on the Android issue is resolved or not.

2.4 Activate the SIM card

Usually, when you buy a new SIM card, it gets automatically activated within 24 hours of being plugged into a new device. But if that’s not happening in your case and you’re wondering how to activate SIM card, make use of the three options below to enable activation:

• Call your carrier service provider
• Send an SMS
• Log on to your carrier’s website and look for the activation page over it.

Note: The aforementioned options are straightforward and are quick ways to enable activation. It depends on your carrier network whether they support them.

2.5 Contact your carrier

Even if your SIM isn’t activated, grab another working device to make a phone call to your carrier or network. Ensure, to explain the entire situation and the error message to them. Be patient while they investigate the issue. It may eat up a heck load of time or may get resolved in a few minutes that completely depend upon the complexity of the issue.

2.6 Try the other SIM card slot

A yet another reason why SIM not working in Android can be because of the SIM card slot might have gone corrupted. Thanks to the dual SIM technology, you do not have to rush immediately to get it to check or repair. You can simply rule out this possibility by ejecting the SIM card from its original SIM slot and then replacing it into the other SIM card slot. If this solution did work out for you then it is obvious that the problem was with the SIM card slot that got corrupted. And hence, it was triggering SIM not responding issue.

2.7 Try the SIM card in other phones

Or just in case, you’ve still no joy and the SIM not provisioned on Android message is bothering you. Try making use of another Android device. Eject the SIM card from the Lava Yuva 3 device which is creating problems and try plugging it into other Lava Yuva 3] and other smartphones. Perhaps, this will let you know whether the issue is with your device only or with the SIM card itself.

2.8 Try a new SIM card

Still, wondering how to fix SIM not provisioned? Perhaps, nothing worked for you, right? Well, on that note, you must head to your carrier store and request a new SIM card. Also, inform them about the “SIM not provisioned MM2” error, they will be able to execute proper diagnostics over your old SIM card and hopefully get it resolved. Or else, they’ll equip you with a brand new SIM card and swap the new SIM card into your device and get it activated in the meantime. Eventually, restoring the normal functioning of your device.

Conclusion

In wrapping up, SIM not provisioned errors on Android can be troubling, but they’re certainly fixable. There are several methods, from a simple device restart to reaching out to your network provider. But if these don’t work, we suggest trying Dr.Fone - System Repair (Android) . This tool is known for its ability to handle an array of Android issues and could be just what your device needs. Navigate your tech challenges with ease using Dr.Fone.

safe & secure

Troubleshooting Guide: How to Fix an Unresponsive Lava Yuva 3 Screen

Smart devices have become an integral part of our lives, and Lava Yuva 3 phones are increasingly popular due to their advanced features and affordable prices. These phones offer numerous benefits, including high-quality cameras, fast processors, long-lasting batteries, and sleek designs.

However, like any other electronic device, Lava Yuva 3 phones can sometimes encounter issues that may impede their functionality. One common problem that users face is an unresponsive screen, which can be frustrating and disruptive to daily activities.

This article will discuss some valuable solutions for dealing with Lava Yuva 3 phone screen unresponsiveness. We will provide step-by-step instructions for troubleshooting and getting your phone back in working order. Whether you’re a novice or an experienced user, these tips and tricks will help you navigate this problem and get back to using your phone without any issues. So, let’s dive in and explore how to fix a Lava Yuva 3 phone with an unresponsive screen.

What causes the Lava Yuva 3 Screen unresponsive?

The Lava Yuva 3 screen may become unresponsive due to various reasons. Here are some common situations and their possible causes:

• During Use/Gaming: The screen may become unresponsive due to overheating when using or gaming on a Lava Yuva 3 phone. This can be caused by running too many apps simultaneously or playing games for an extended period, especially on models such as the Lava Yuva 3 9 Pro, which generates much heat during gaming.

• **No Response When Touching the Screen:**Sometimes, the Lava Yuva 3 screen may not respond when touched due to a faulty touch screen or display. This can happen due to physical damage or a manufacturing defect. Some Lava Yuva 3 Nord 2 users have reported this issue.

• After Dropping the Phone: If a Lava Yuva 3 phone has been dropped, the screen may become unresponsive due to physical damage or a loose connection. This can happen to any model, including the Lava Yuva 3.

Overheating, physical damage, and manufacturing defects are some common causes of Lava Yuva 3 screen unresponsiveness, which may occur during use/gaming, no response when touching the screen, or after dropping the phone.

The common solutions to solve a Lava Yuva 3 Screen unresponsive

Here are the three most common solutions to deal with phone screens being unresponsive, regardless of the brand:

Restart the Lava Yuva 3 device

Restarting the Lava Yuva 3 device is a simple and quick solution to an unresponsive phone screen. To restart the phone, press and hold the power button until the screen turns off, then press and hold the power button again to turn the phone back on.

Check the Charging Port and Battery

Sometimes, an unresponsive screen can be caused by a dead battery or a faulty charging port. To check for these issues:

Step 1: Plug the phone into a charger and wait for at least 30 minutes to see if the battery charges.

Step 2: Try a different charger or cable to see if the issue is with the charging accessories.

Contact the Pros

If the above solutions don’t work, contacting a professional is best. A trained technician can diagnose and fix the problem. Contact the phone manufacturer or an authorized repair center to get help with your phone.

For different Lava Yuva 3 models, there may be additional solutions to consider:

Check the Phone’s Temperature

Sometimes, a Lava Yuva 3 phone’s screen, specifically Lava Yuva 3 8 Pro, may become unresponsive due to overheating. To check the phone’s temperature:

Step 1: Go to Settings > Battery > Battery Temperature.

Step 2: If the phone is overheating, let it cool down before using it again.

Reset to Factory Settings

A factory reset may help fix the problem if none of the above solutions work. Note that this will erase all data and settings on the phone, so be sure to back up your data before resetting. To reset the phone:

Step 1: Go to Settings > Additional Settings > Backup and Reset > Erase All Data.

Step 2: Follow the on-screen instructions to reset the phone.

Replace a New Screen

If the phone’s screen is physically damaged or cracked, it may need to be replaced. To replace the screen:

• Contact a professional repair center or the manufacturer for replacement parts and installation.

How to avoid Lava Yuva 3 Screen being unresponsive?

To avoid Lava Yuva 3 screen being unresponsive, here are some suggestions based on the possible causes:

Check Software Updates on Time

Make sure to regularly check for and install software updates on your Lava Yuva 3 phone. These updates often include bug fixes and security patches that can help prevent issues like overheating and screen unresponsiveness.

Check Hardware from Time to Time

Regularly inspect your phone’s hardware components such as charging ports, battery, and screen for any signs of damage or wear and tear. If you notice any issues, get them fixed promptly to prevent them from causing further damage.

Avoid extreme temperatures

Keep your Lava Yuva 3 device in a temperature-controlled environment. High temperatures can cause the screen to become unresponsive, and low temperatures can cause it to freeze.

Keep the screen clean

Dirt and debris on the screen can cause it to become unresponsive. Use a microfiber cloth to clean the screen regularly.

Reduce the number of running apps

Running too many apps at once can overload the system and cause the screen to become unresponsive. Close any apps you’re not using to free up system resources.

Use Wondershare Dr.Fone to Repair or Manage Your Data

Wondershare Dr.Fone is a helpful tool that can help manage and repair your phone’s data. It can be used to back up your data, transfer files between devices, and even fix issues like an unresponsive screen. Dr.Fone has the DF13 version to be launched, which includes more features to help manage your phone’s data effectively.

By following these suggestions, you can help prevent screen unresponsiveness on your Lava Yuva 3 phone. Download Dr.Fone at https://drfone.wondershare.com/ to manage your phone’s data effectively and fix any issues that may arise.

safe & secure

Conclusion

Lava Yuva 3 phones offer numerous benefits, including high-quality cameras, fast processors, long-lasting batteries, and sleek designs. However, like any other electronic device, Lava Yuva 3 phones can sometimes encounter issues, such as an unresponsive screen. The causes of an unresponsive screen may include overheating, physical damage, and manufacturing defects.

To deal with an unresponsive screen, users can try restarting the Lava Yuva 3 device, checking the charging port and battery, or contacting a professional. Additional solutions for specific Lava Yuva 3 models include checking the phone’s temperature, resetting to factory settings, or replacing a new screen. To avoid an unresponsive screen, users can check software updates on time, inspect the phone’s hardware, avoid extreme temperatures, keep the screen clean, and reduce the number of running apps. Dr.Fone is a helpful tool that can help manage and repair your phone’s data.

What To Do if Your Lava Yuva 3 Auto Does Not Work

Embracing the convenience of Android Auto enhances your driving experience. It seamlessly connects your smartphone with your vehicle. However, in the realm of technology, glitches and malfunctions are commonplace. Android Auto, too, may encounter software or hardware issues that disrupt its functionality.

In this guide, you’ll delve into the common problems users face when Android Auto does not work and provide practical solutions to get you back on the road smoothly. From troubleshooting software glitches to addressing hardware concerns, this article aims to equip you with the knowledge to tackle Android Auto problems effectively.

Part 1. A Briefer on Android Auto

Android Auto is a revolutionary application designed to enhance the in-car experience by seamlessly connecting Android smartphones to compatible vehicles. It serves as a co-pilot, offering hands-free navigation, communication, and entertainment options, minimizing distractions while driving.

How Android Auto Works

Understanding the mechanics of this technology is essential for effective Android Auto troubleshooting. It mirrors your Android smartphone’s interface onto your car’s infotainment system. It provides a simplified and optimized version of your device’s features on the road.

Android Auto connects your smartphone to your car’s infotainment system via USB cable or wirelessly, depending on your device and car compatibility. Once clicked, it displays a user-friendly interface on your car’s screen, allowing you to access navigation through Google Maps, make calls, send messages, and control multimedia apps with voice commands or touchscreen gestures.

By integrating familiar smartphone functionalities into your car, Android Auto aims to provide a safer and more enjoyable driving experience, reducing the need for manual phone interactions while on the road. Understanding this foundation will empower you to effectively troubleshoot when issues arise.

Part 2. Common Issues Android Auto Faces + Troubleshooting/Repair

Even if it is such a great technology, sometimes Android Auto won’t connect. It also deals with common issues that can affect its performance. In this section, you’ll delve into these challenges and equip you with practical troubleshooting solutions to fix your Android Auto experience.

Connection Issues

Connection glitches through Bluetooth or USB can cause Android Auto issues. USB connection problems often come from subpar cables.

The solution here is straightforward – invest in a high-quality USB cable. This ensures a stable link between your smartphone and the car’s infotainment system. Meanwhile, Bluetooth pairing problems may require a bit of digital maneuvering. Try restarting your phone, rebooting the car’s infotainment system, or resetting Bluetooth settings to establish a smooth connection.

App-Specific Problems (Certain Apps Not Working)

Android Auto relies heavily on various navigation, communication, and entertainment applications.

If specific apps refuse to cooperate, a quick remedy is to restart the head unit. If the issue persists, consider uninstalling and reinstalling the problematic applications. This step ensures a clean slate for the apps, potentially resolving any underlying compatibility or performance issues.

Screen and Display Problems (Head Unit)

Issues with the screen or display on your car’s head unit can be disconcerting. To troubleshoot, commence with a simple restart of the head unit.

If the problem lingers, escalate the solution by restarting the entire car. Should these steps prove ineffective, seeking professional assistance at a maintenance center is advisable. This ensures a thorough examination and potential resolution of hardware-related problems, providing a comprehensive fix for persistent screen and display issues.

Voice Commands Not Working

Voice commands serve as a cornerstone of the Android Auto hands-free experience. When they falter, it can disrupt the seamless interaction with the system.

Begin by scrutinizing your internet connection, as voice commands rely on a stable link to function effectively. If the issue persists, a basic restart of the head unit might recalibrate the system, restoring the functionality of voice commands.

Understanding that these issues are inherent to any technology, Android Auto users can confidently navigate and troubleshoot these problems with the provided solutions. By addressing these commonplace concerns, users empower themselves to swiftly overcome hurdles, ensuring a seamless and gratifying driving experience with Android Auto.

Part 3. A Quicker Solution: Wondershare Dr.Fone – System Repair

If navigating through various troubleshooting steps seems complicated, especially if the issue resides within your Lava Yuva 3, a swift and efficient solution comes in the form of Wondershare Dr.Fone - System Repair.

While the methods presented earlier primarily address software glitches, Dr.Fone can tackle more profound issues, offering a quick fix to revitalize your Android Auto experience. It is a comprehensive toolkit that caters to various Android needs, ensuring a seamless and optimized experience. Among its array of features, the System Repair feature in Dr.Fone acts as a reset button for your Lava Yuva 3.

It addresses issues that go beyond the scope of regular troubleshooting. It gives your phone a fresh start by repairing the Android system and resolving glitches, crashes, and other persistent software-related problems. This revitalizes your telephone and can significantly impact Android Auto’s performance.

Note: If the problem persists and is related to the car’s head unit, a visit to the maintenance center might be necessary after exhausting these software-based solutions.

How To Use Wondershare Dr. Fone’s System Repair

To use Dr. Fone’s System Repair feature, follow the steps below. These steps will work with any Android phone.

• Step 1: Begin by launching Dr.Fone on your computer. From the left panel, access the Toolbox menu and click System Repair. Ensure your Lava Yuva 3 is connected.

safe & secure

4,014,082 people have downloaded it

• Step 2: On the subsequent screen, select Android as your device.

• Step 3: Initiate the Android System Repair by clicking Start.

• Step 4: Confirm the accuracy of your device details. If needed, edit any information that may be incorrect.

• Step 5: Place your phone into Download mode following the guidelines tailored for phones with or without home buttons. Your phone will commence downloading the dedicated firmware.

• Step 6: Once the firmware is downloaded, verify and proceed with the installation by clicking Fix Now. Confirm the firmware installation by inputting “000000” into the text box in the appearing window. Click Confirm afterward.

• Step 7: Upon completion of the process, your phone should now be restored. Click Done to conclude.

safe & secure

4,276,578 people have downloaded it

Conclusion

In wrapping up this guide, you’ve explored common reasons Android Auto does not work. You’ve also been provided practical solutions to keep your driving experience seamless. Remember, regular maintenance of your car’s head unit and periodic checks on your Lava Yuva 3 can preemptively address potential issues.

By staying proactive, you ensure a consistently smooth ride with Android Auto. For comprehensive system repair and addressing broader Android-related needs, consider trying out Dr.Fone. It’s a versatile tool that can enhance your Android experience and keep your digital journey hassle-free. Take control of your drive and explore the full potential of your Lava Yuva 3s with Dr.Fone today.

Also read: