9 Quick Fixes to Unfortunately TouchWiz has stopped Of Samsung Galaxy Z Flip 5

“Unfortunately TouchWiz home has stopped” is the talk of the town due to annoying TouchWiz UI, a front-end user interface developed by Samsung Galaxy Z Flip 5. Not to mention, the Samsung Galaxy Z Flip 5 has borne a whole lot of heat from its agitated users over the years and the reason is pretty much obvious due to the pre-installed bloatware apps and the theme launch “TouchWiz home”. That not just brutally annoys users and eats up a heck of internal storage space but lags up too often due to low speed and stability. As a result users end up with “Unfortunately TouchWiz home has stopped” and “Unfortunately, TouchWiz has stopped”. Apparently, there are several flaws in the design and functioning of this launcher and hence, Touchwiz keeps stopping or becomes unresponsive.

Part 1: Common scenarios when TouchWiz keeps stopping

Here in this section, we will introduce some scenarios that can be blamed for why TouchWiz is not working. Check out the following points:

• More often than not, the TouchWiz keeps stopping after an Android update. When we update our Samsung Galaxy Z Flip 5 device, the old data and cache usually conflicts with TouchWIz thereby cropping up this mess.
• When you disable some built-in apps, you might get in trouble with TouchWiz. Doing this sometimes can hamper the TouchWiz operation and raise the “**unfortunately TouchWiz home has stopped**” error message.
• Many times installing some third-party apps and widgets can cause this problem. The apps like launchers can be conflicting with TouchWiz home launcher and therefore cease it to work. Also, a glitched widget is responsible for the same i.e. forces stop the TouchWiz.

Part 2: 9 Fixes to “Unfortunately TouchWiz has stopped”

Fix “TouchWiz keeps stopping” by repairing Android system

When your TouchWiz keeps stopping and you aren’t able to proceed further, the best way to handle the situation is to repair the Android system. And the best that can help you to serve the purpose is Dr.Fone - System Repair (Android). It has the ability to fix any sort of Android system issue without any complications. To fix this issue, the tool only takes few minutes of yours and performs smoothly. Moreover, you don’t have to worry if you aren’t tech pro. This tool requires no special technical know-how. Here are the advantages you get with this tool.

Dr.Fone - System Repair (Android)

One click tool to fix “Unfortunately TouchWiz has stopped”

• A very easy tool that fixes problems in just one click
• Provides full support all day all night as well as offers 7 day money back challenge
• Enjoys higher success rate and considered as first tool carrying such amazing functionalities
• Able to fix wide variety of Android issues including app crashing, black/white screen of death
• Fully secured and no harm regarding any virus infection

3,211,972 people have downloaded it

Step 1: Download the Program

The one-click repairing process begins with downloading Dr.Fone from its official website. When it is downloaded, follow the installation steps. Upon successful installation, launch the tool on your PC.

Step 2: Connect your Samsung Galaxy Z Flip 5 Device

After you open the software, hit on the “System Repair” button from the main interface. With the help of a genuine USB cable, get your Samsung Galaxy Z Flip 5 phone and connect it with the computer.

Step 3: Choose the Tab

Now, from the next screen, you are supposed to choose “Android Repair” tab. It is given on the left panel.

Step 4: Enter Right Information

Please keep your mobile details handy as you will need them in the next window. You will need to enter the correct brand, model, and country name etc. for better detection of your device.

Step 5: Confirm Actions

This process may result in removing your data hence we strongly recommend you to keep a backup of your data.

Tip: You can use Dr.Fone – Phone Backup (Android) to backup your Samsung Galaxy Z Flip 5 device in case you’re wondering how.

Step 6: Take your Device in Download mode

You will get some instructions on your screen to keep your device in Download mode. Follow them according to the Samsung Galaxy Z Flip 5 device you own and hit “Next”. When you do this, the program will detect your device and let you download the latest firmware.

Step 7: Repair Device

Now, when the firmware is downloaded, the program will itself begin to repair your device. Wait and keep the Samsung Galaxy Z Flip 5 device connected until you get the notification for process completion.

Clear the cache data the TouchWiz

Maximum Android devices are designed to deleted cache data upon getting updated to the newest Android system. However, Samsung Galaxy Z Flip 5 stands as an exception in such case. And therefore, many times TouchWiz starts stopping right after upgrading. Thus, due to the collection of cache data, TouchWiz can display error. This calls for removing the cache from TouchWiz and run things smoothly. Here is how to do this:

• Tap on “Apps” from the Home screen firstly.
• Launch “Settings” afterwards
• Look for “Applications” and tap on it followed by “Application Manager”.
• When Application Manager gets opened, swipe towards right to get into the “All” screen.
• Now, choose “TouchWiz” and tap “Clear Cache”.
• Now, tap “Clear Data” followed by “OK”.
• Now restart your device.

Please note that this will delete all your Home screens post this method.

Disable Motion & gesture settings

The functions regarding Motions and Gestures can be responsible for why TouchWiz home has stopped in your device. Usually the Samsung Galaxy Z Flip 5 devices running on Android version less than Marshmallow are prone to encountering this issue. Or the Samsung Galaxy Z Flip 5 devices having modest specs often fall prey to the issue. When you disable these settings, you might get out of the problem.

Change the Animation Scale

When you use TouchWiz, it may consume higher memory usage for high amount of graphic maintenance. As a result, the “**unfortunately TouchWiz home has stopped**” error might crop up. Taking this into consideration, you should try reconfiguring the animation scale and get rid of the error. Here’s how:

Clear Cache Partition

In case the above steps didn’t figure out the problem, here is the next tip. This method can be counted as one of the most effective one. Because it is able to fix minor issues in Android devices, we recommend you for “**TouchWiz home has stopped**” issue too. Let us know how you can do it:

• Turn off your Samsung Galaxy Z Flip 5 device.
• Start pressing and holding “Volume Up” and “Power” buttons simultaneously.
• Keep doing this until you see the Android screen. This will take your device into recovery mode.
• You will observe some options on the screen. Take help of Volume buttons, scroll down to choose “Wipe Cache Partition”. Press Power button to confirm and the Samsung Galaxy Z Flip 5 device will be rebooted.

Check now if the error is eliminated. If unfortunately not, please try the following solution.

Enable the easy mode

For some users, enabling Easy Mode has been of great assistance. This feature aims to make the user experience more efficient by simply eliminating complex features. The Easy Mode removes those features that confuse the users by messing up the screen. Hence, we suggest you to switch to this mode in order to remove “**TouchWiz not working**” problem. The steps are:

• Open “Settings” and go to “Personalization”.
• Hit on “Easy Mode” now.

Hope the TouchWiz won’t keep stopping error does not pop up anymore!

Boot your phone to safe mode

Here is the next solution to be followed when TouchWiz keeps stopping. As we already said, third-party apps can cause this issue, booting your device in the Safe mode will disable those apps temporarily. Hence you need to boot your Samsung Galaxy Z Flip 5 device to Safe mode and check if the reason is any third-party app.

• Switch off your device to initiate.
• Press “Power” button and keep doing this until device’s logo appears on the screen.
• When you see logo appearing, instantly release the button and start holding “Volume Down” button.
• Keep holding until rebooting finishes.
• You will now witness “Safe mode” on the bottom screen. You can now release the button.

Reset Factory settings

If the above method went futile and you’re still at the same place, then factory reset is the next logical step to be taken. We suggest this method because it will take your device to its factory state. As a result, TouchWiz will probably get normal and work perfectly.

Along with this, we would also suggest you go take backup of your data so that you won’t lose any of the personal information from your device after performing factory reset. For your convenience, we have stated the backup steps too in the following guide. Have a look:

• Run “Settings’ in your device and go to “Backup & Reset”.
• Notice if “Back up my data” is enabled or not. If not, turn it on and create backup.
• Now, scroll for “Factory Data reset” option and confirm it by clicking “Reset Phone”.

• Wait a few minutes and your device will reboot.

Install a new launcher to replace TouchWiz

We believe that you will find the above methods helpful. However, if still in case your TouchWiz is not working, we advice you that you should install a new theme launcher in your device. It will be a wise option to ditch TouchWiz in such scenario rather than tolerating the problem. Hope this advice will help you.

7 Fixes for “Unfortunately, Phone Has Stopped” on Samsung Galaxy Z Flip 5

Encountering issues with the Phone app is never welcoming. Being one of the useful apps, seeing it crashing and unresponsive gives sheer despondency. If talked about the triggering points, they are numerous. But the central point is what to do when the Phone app keeps crashing. In this article, we have discussed this issue in detail. To know this and more about why the “Unfortunately, Phone has stopped” error crops up, read this article and get the problem sorted on your own.

Part 1: When can the “Unfortunately, Phone has stopped” error come?

First things first! You need to stay updated on why the Phone app keeps stopping or crashing before jumping to any solution. Following are the points when this error comes up to annoy you.

• When you install a custom ROM, the issue might occur.
• The upgrading of the software or incomplete updates can lead to crashing the Phone app.
• Data crashes can be another reason why this error shows up.
• Infection through malware and virus on your phone is also included when the Phone app might crash.

Part 2: 7 Fixes for the “Unfortunately, Phone Has Stopped” error

2.1 Open the Phone app in Safe Mode

First and foremost, the thing that can let you get rid of this trouble is Safe Mode. It is a feature that will end any excessive background functioning of the Samsung Galaxy Z Flip 5 device. For instance, your device will be able to run sans any third-party apps when in Safe mode. Since the important functions and the naïve apps will be running on the Samsung Galaxy Z Flip 5 device, you will get to know if it’s really a software glitch or not by running the Phone app in Safe mode. And this is the first solution we would recommend you make use of when the Phone app has stopped. Here is how to enable Safe Mode.

1. Switch off the Samsung Galaxy Z Flip 5 phone first.
2. Now keep pressing the “Power” button until you see the Samsung Galaxy Z Flip 5 logo on the screen.
3. Release the button and immediately press and hold the “Volume Down” key.
4. Leave the key once the Samsung Galaxy Z Flip 5 device is in Safe mode. Now, the third-party apps will be disabled and you can check if the Phone app is still not responding or everything is fine.

2.2 Clear the cache of the Phone app

The cache should be cleaned timely if you want any app to work properly. Due to the constant usage, the temporary files get collected and may corrupt if not cleared. Hence, the next solution you should try when the Phone app keeps stopping is to clear the cache. Here are the steps to be performed.

1. Open “Settings” on your device and go to “Application” or “Apps”.
2. Now from the list of all applications, go to “Phone” and tap on it.
3. Now, click on “Storage” and choose “Clear Cache”.

2.3 Update Google Play services

Since Android is created by Google, there must be some Google Play services that are crucial to run several system functions. And if attempting the previous methods isn’t of any use, try updating Google Play services when you find the Phone app stopped. For doing this, you need to make sure that automatic updates are turned on in Google settings. If not, enable it and get the apps including Google Play services updated for smoother functions.

2.4 Update the Samsung Galaxy Z Flip 5 firmware

When the firmware is not updated, it may conflict with some apps and maybe that’s why your Phone app falls prey. Therefore, updating Samsung Galaxy Z Flip 5 firmware will be a sane step that should be taken when the Phone app has stopped. Follow the below-mentioned steps and then check if the Phone app is opening or not.

1. Open “Settings” and go to “About Device”.
2. Now tap on “Software Updates” and check for the availability of the new update.

1. Download and install it and then try to use the Phone app.

2.5 Clear partition cache

Here is another resolution for the “Unfortunately Phone has stopped” error. Clearing the partition cache will remove the whole cache of the Samsung Galaxy Z Flip 5 device and make it work like before.

1. Switch off your device to begin with and enter the recovery mode by pressing the “Home”, “Power” and “Volume Up” buttons.
2. The recovery mode screen will appear now.
3. From the menu, you need to choose “Wipe Cache Partition”. For this, you can use the Volume keys to scroll up and down.
4. To select, press the “Power” button.
5. The process will begin and the Samsung Galaxy Z Flip 5 device will restart post it. Check if the problem still persists or it is finished. If unfortunately not, get to the next and the most productive solution.

2.6 Get the Samsung Galaxy Z Flip 5 system repaired in one click

If still, the Phone app keeps stopping after trying everything, here is the most effective method that can surely help you. Dr.Fone - System Repair (Android) is a one-click tool that promises to repair Android devices hassle-free. Be it apps crashing, the black screen, or any other issue, the tool has no problem fixing any sort of issue. Here are the benefits of Dr.Fone - System Repair (Android).

Dr.Fone - System Repair (Android)

Android repair tool to fix “Unfortunately, Phone Has Stopped” on Samsung Galaxy Z Flip 5 devices.

• It takes no special skills to operate it and fairly works to bring the Android system to normalcy.
• It shows great compatibility with all Samsung Galaxy Z Flip 5 devices and other Android phones supporting over 1000 Android brands.
• Fixes any kind of Android issue without any complication.
• Easy to use and trusted by millions of users and therefore has a higher success rate.
• Can be downloaded freely and friendly user interface.

3,106,444 people have downloaded it

How to fix crashing Phone app using Dr.Fone - System Repair (Android)

Step 1: Get the Software Installed

Click the “Start Download” button to download the tool on your computer, and then open the program to begin the repair, click on “System Repair”.

Step 2: Plug the Phone with PC

Take your original USB cord and then connect your Samsung Galaxy Z Flip 5 to the computer. When the Samsung Galaxy Z Flip 5 device is connected, click on “Android” from the two tabs > click “Start”

Step 3: Enter the Details

As the next step, enter some important details on the next screen. Be sure to enter the right name, brand, and model of the Samsung Galaxy Z Flip 5 device. When done everything, verify once and click on “Next”.

Step 4: Downloading Firmware

Downloading firmware will be the next step. Prior to this, you have to go through the instructions given onscreen to enter the DFU mode. Please click on “Next” and the program will bring the suitable firmware version and start downloading it.

Step 5: Get the Samsung Galaxy Z Flip 5 device Repaired

When you see the firmware has been downloaded, the issue will begin to get resolved. Hang on and wait until you get notified for the repair of the Samsung Galaxy Z Flip 5 device.

safe & secure

2.7 Factory reset

If none of the above methods worked for you, the last resort you are left with is a factory reset. This method will wipe everything from your device and make it function like normal. We also suggest you make a backup of your data if it is important so as to prevent the loss. Here is how to do this to fix the crashing Phone app.

1. Open “Settings” and go to the “Backup and Reset” option.
2. Look for “Factory data reset” and then tap on “Reset phone”.
3. Within a while, your device will go through resetting and boot up to normalcy.

safe & secure

What To Do When Samsung Galaxy Z Flip 5 Has Black Screen of Death?

Have you ever got the error of freezing the Android device home screen? Or the notification light keeps blinking without anything shown on display? Then you are facing Android black screen of death.

This scenario is common with many Android mobile users, and they always hunt for solutions to get rid of this Android black screen problem. Here are some more situations that can assure you that you are facing Android black screen of death.

• The light of the phone is blinking but the Samsung Galaxy Z Flip 5 device is not responding.
• The phone is hanging and freezing very frequently.
• The mobile is rebooting and crashing more often and the battery is draining a lot faster.
• Phone restarts on its own.

If you face these situations, you might be facing the Android black screen of death issue. Follow this article, and we’ll discuss how to get rid of this annoying problem at ease.

Part 1: Why Android device gets black screen of death?

Similar to the “Blue Screen of Death “ (BSOD) on computers, the Android Black Screen of Death indicates a severe system crash or malfunction. When this issue occurs, the Samsung Galaxy Z Flip 5 device’s display remains blank, and you are unable to interact with the Samsung Galaxy Z Flip 5 device, access apps, or perform any actions. The cause of the Android black screen of death can vary, but some common factors include:

• Install incompatible apps or apps with bugs and viruses.
• Have bugs or errors in the Android operating system.
• Keep the mobile charged for long after it’s fully charged.
• Use a non-compatible charger.
• Use an old battery.
• Incorrectly install or incomplete system updates.
• Excessive heat due to heavy usage or environmental factors.

If you face the situations mentioned above, this is clearly a case of the Android screen black. But don’t worry about that. You can follow the article below to get rid of this situation on your own.

Part 2: How to rescue data when Android gets black screen of death?

This annoying Android black screen of death is making it impossible to access your internal data. So, the possibility is that you might lose all the data. We have a solution for all of your data recovery problems from a damaged Android device.

The solution for recovery data is the Dr.Fone - Data Recovery (Android) toolkit by Wondershare. This tool is highly appreciated worldwide and very popular for its feature-rich user interface. This tool can perform a lot of functions that can successfully recover the data from a damaged device.

Use this revolutionary toolkit to get the data back from the black tablet screen of death. Connect the Samsung Galaxy Z Flip 5 device with the PC after installing this tool and follow the on-screen instruction, and all of your data will be transferred to your PC. Unfortunately, the tool is supported on selected Samsung Galaxy Z Flip 5 Android devices as of now.

Dr.Fone - Data Recovery (Android)

A Dedicated Tool to Retrieve Data from Broken Android Devices .

• Recover data from broken devices or devices that are damaged in any other way, such as those has black screen.
• Recover photos, videos, contacts, messages, call logs, and more.
• Highest retrieval rate in the industry.
• Compatible with most Samsung Galaxy Z Flip 5 devices.

3981454 people have downloaded it

Part 3: 9 Solutions to fix the black screen of death of Android

• 3.1 One click to fix the black screen of death
• 3.2 Force restart your Samsung Galaxy Z Flip 5
• 3.3 Check and clean your phone
• 3.4 Remove the battery
• 3.5 Recharge the Samsung Galaxy Z Flip 5 device
• 3.6 Wipe cache partition to fix black screen of death
• 3.7 Uninstall incompatible apps
• 3.8 Reboot to safe mode
• 3.9 Factory reset to fix Android black screen of death

3.1 One click to fix the black screen of death

Facing an Android device with a black screen of death, I believe, is one of the gloomiest moments of one’s life, especially for those who know little about the technical part of Android. But here is the truth we have to admit: most cases of the black screen of death arise due to system glitches in Android.

What to do? Shall we find someone who is tech-savvy to seek help? Come on, this is the 21st century, and there are always one-click solutions to deal with technical issues for laymen like you and me.

Dr.Fone - System Repair (Android)

Fix Black Screen of Death for Android In One Click

• Fix all Android system issues like a black screen of death, OTA update failures, etc.
• Update the firmware of Android devices. No technical skills are required.
• Support all the new Samsung Galaxy Z Flip 5 devices like Galaxy S22, S23, etc.
• Click-through operations to bring Android out of the black screen of death.

3,364,231 people have downloaded it

Here are the easy steps to get your Samsung Galaxy Z Flip 5 out of the black screen of death:

1. Download and install the Dr.Fone tool. After launching it, you can see the following screen pop up.

   

2. Select “System Repair” from the home page, and then click on the “Android “.

   

3. Click “Start” to commence the Android system repair. In the next screen, select and confirm your Android model details like name, model, country, etc. and go on.

   

4. Boot your Android into Download mode by following the on-screen demonstrations.

   

5. Then the tool will download the Android firmware and flash the new firmware to your Samsung Galaxy Z Flip 5.

   

6. A moment later, your Samsung Galaxy Z Flip 5 will be repaired completely, and the black screen of death will be fixed.

   

Video guide: How to fix the Android black screen of death step by step

safe & secure

3.2 Force restart your Samsung Galaxy Z Flip 5

Because it is the quickest and most painless solution, most people do this when their Android phone screen goes black too fast. The majority of phone issues can be resolved by performing a hard reboot. Here are the necessary measures if you haven’t tried this method before.

To reboot your Samsung Galaxy Z Flip 5, you may need to press a specific key combination, depending on the model you have, but most Android devices can be force restarted by doing the following steps:

Step 1: Press and hold the power button for about 10-15 seconds. Keep holding it until the Samsung Galaxy Z Flip 5 device restarts.

Step 1: For Samsung Galaxy Z Flip 5 devices, press and hold down the Power and Volume Down buttons for about 7 seconds.

3.3 Check and clean your phone

This method might not be popular with Android users, but this can do wonders when dealing with an Android black screen of death issue. To do this, follow the steps provided below:

Step 1: Ensure your phone’s buttons and ports are not stuck before anything else.

Step 2: See if dirt prevents you from turning the Samsung Galaxy Z Flip 5 device on. Then, quickly press and release the button a few times.

Step 3: If the phone isn’t charging normally, ensure the charging port isn’t clogged with dust and debris by checking and cleaning it. You can gently blow out any debris in the charging port or use a wooden toothpick to pry it open.

Step 4: After you’re done with the cleaning, it’s best to charge the phone for at least 10 minutes. Just give it a quick charge and then try to restart it.

3.4 Remove the battery

If your phone’s battery is removable, you can try taking it out and trying again if restarting and cleaning it doesn’t fix the problem.

Step 1: To get started, take the phone apart by starting at the back.

Step 2: After 20 to 30 seconds, take out the battery and put it back in.

Note: When replacing the battery, ensure the metal contacts correctly connect to the phone.

This easy and straightforward method should help you fix your Android screen black issue, but if it doesn’t, continue reading, as this article got more techniques you can try.

3.5 Recharge the Samsung Galaxy Z Flip 5 device

If your Samsung Galaxy Z Flip 5 screen suddenly goes black, let the battery die completely. Then once the battery is completely dead, you should plug it in to charge and turn it on by pressing the Power button. Try to check if you still encounter the issue after doing so.

3.6 Wipe cache partition to fix black screen of death

If your Samsung Galaxy Z Flip 5 turns on, but the screen remains black, clearing the cache partition should solve the problem. After all, keeping caches on your phone would cause it to run more slowly and cause other problems. Therefore, the issue can be resolved by clearing the cache partition. Check the following steps on how to do this below:

Step 1: Turn off your Samsung Galaxy Z Flip 5.

Step 2: Boot the Samsung Galaxy Z Flip 5 device into Recovery Mode.

Note: The steps necessary to enter recovery mode will vary depending on your specific Android phone model. To ensure you’re doing the correct steps for your device, consult the user manual or look it up online. The following instructions work for Samsung Galaxy Z Flip 5 devices:

• For older Samsung Galaxy Z Flip 5 devices with the home button: Press and hold the Volume Up button, the Power button, and the Home buttons simultaneously.
• For newer Samsung Galaxy Z Flip 5 devices without the home button: Press and hold the Volume Up button and the Power button together.
• If the Samsung Galaxy Z Flip 5 device logo appears, release your grip, and the phone will restart.

Step 3: Find the Wipe cache partition option using the volume controls after entering Recovery Mode.

Step 4: Select Wipe cache partition by pressing the Power button.

Step 5: On the next screen, use the Volume Down button to highlight “Yes” and then press the Power button to confirm the cache wipe.

Step 6: The cache partition will be wiped, and you will see the “Cache wipe complete” message on the screen.

Step 7: Use the Volume Down button to navigate to the “Reboot system now” option and press the Power button to reboot your Samsung Galaxy Z Flip 5 device.

After rebooting, you can see that you have successfully got rid of the annoying Android black screen of death. For most of the cases, this method solves the problem. If not, you have to move to the next method.

3.7 Uninstall incompatible apps

Android screen black can be a result of installing a bug or incompatible apps. If you have recently installed an app that crashes frequently, that may be the reason for the issue. Uninstalling the app from the Samsung Galaxy Z Flip 5 device may solve the problem with ease. For doing this, you need to boot your device in Safe mode. Follow the below steps.

Step 1: Power down your device by pressing and holding the Power button until a menu appears.

Step 2: Navigate to Safe Mode by pressing and holding the Power Off button.

Step 3: Tap the “Safe mode” icon to enter Safe mode. You should now see Safe Mode at the Samsung Galaxy Z Flip 5 device’s bottom.

Step 4: After selecting Settings, head to the Apps section.

Step 5: Select the app by clicking on it; the App Info window should appear. To uninstall the app, tap the Uninstall option from the menu below the screen.

Step 6: Now restart the Samsung Galaxy Z Flip 5 device by pressing the power button and let it boot up in normal mode.

If the app is the reason for Android black screen of death, then after uninstalling, you can get rid of this issue. If not, now you have to factory reset your device to solve the problem.

3.8 Reboot to safe mode

Even after multiple attempts to launch them, certain applications act suspiciously and cause the Samsung Galaxy Z Flip 5 device to crash. When an Android phone suddenly goes black, you can often isolate the problem to a specific app by booting into Safe mode.

Step 1: Begin by restarting your phone. To do that, press the Power button until a menu appears.

Step 2: Press the Power Off button to enter Safe mode.

Step 3: Activate Safe mode by clicking the “Safe Mode” icon.

Step 4: To return to Normal mode, turn off your device and then turn it back on.

3.9 Factory reset to fix Android black screen of death

The factory reset is the option that enables the factory state of your device by erasing all data, settings, bugs, and apps. Your device will be fresh like factory condition after this reset. Worth mentioning here, you’ll lose all the internal data and installed apps after this reset. So, to overcome the Android tablet black screen of death, you must perform this action as the last option. Follow the below steps carefully.

Step 1: Turn off the Samsung Galaxy Z Flip 5 device. Then press the Volume Up + Power button + home button (or press Volume Up + Power buttonS) altogether and let the mobile boot into recovery mode.

Step 2: After booting up in recovery mode, you can find the “Factory data reset” option. Navigate to that option with the volume up and down arrow and select it with the power button.

Step 3: In this step, you need to confirm your action by tapping on the “Yes” option. After this, your device will start erasing. This may take a while to complete the whole process.

Now, your device will reboot automatically and you can see the Android black screen of death problem is solved.

Part 4: How to avoid Android black screen of death?

These are the general methods to overcome the situation of Android screen black. But to avoid this situation, here are a few tips to follow –

• Install apps from trusted suppliers only.
• Use security or antivirus software on your device.
• Take a backup at regular intervals.
• Always keep Android OS updated.
• Don’t keep your mobile charged for a long duration after a full charge.
• If your battery gets old, replace it soon.
• Keep your device’s storage well-maintained. Regularly delete unnecessary data.
• Close unused apps running in the background to conserve system resources.
• Prevent phone overheating by avoiding excessive usage, and not exposing it to direct sunlight for extended periods.

By following these steps, you should avoid the most unpleasant situations, such as the Android screen black. We all know that “Prevention is always better than cure”.

The Bottom Line

There could be a lot of reasons why an Android black screen issue occurs, but the important thing is knowing the correct ways how to fix it. And this article has covered nine proven methods to help you fix an Android phone screen black problem.

But among the methods discussed above, Dr.Fone – System Repair just stood out as this program does not only help you with a black screen of death problem, but it covers many other Android system issues too. It’s also a highly intuitive program that requires no skills to operate.

safe & secure

Also read: