9 Quick Fixes to Unfortunately TouchWiz has stopped Of Tecno Spark 10C

“Unfortunately TouchWiz home has stopped” is the talk of the town due to annoying TouchWiz UI, a front-end user interface developed by Tecno Spark 10C. Not to mention, the Tecno Spark 10C has borne a whole lot of heat from its agitated users over the years and the reason is pretty much obvious due to the pre-installed bloatware apps and the theme launch “TouchWiz home”. That not just brutally annoys users and eats up a heck of internal storage space but lags up too often due to low speed and stability. As a result users end up with “Unfortunately TouchWiz home has stopped” and “Unfortunately, TouchWiz has stopped”. Apparently, there are several flaws in the design and functioning of this launcher and hence, Touchwiz keeps stopping or becomes unresponsive.

Part 1: Common scenarios when TouchWiz keeps stopping

Here in this section, we will introduce some scenarios that can be blamed for why TouchWiz is not working. Check out the following points:

• More often than not, the TouchWiz keeps stopping after an Android update. When we update our Tecno Spark 10C device, the old data and cache usually conflicts with TouchWIz thereby cropping up this mess.
• When you disable some built-in apps, you might get in trouble with TouchWiz. Doing this sometimes can hamper the TouchWiz operation and raise the “**unfortunately TouchWiz home has stopped**” error message.
• Many times installing some third-party apps and widgets can cause this problem. The apps like launchers can be conflicting with TouchWiz home launcher and therefore cease it to work. Also, a glitched widget is responsible for the same i.e. forces stop the TouchWiz.

Part 2: 9 Fixes to “Unfortunately TouchWiz has stopped”

Fix “TouchWiz keeps stopping” by repairing Android system

When your TouchWiz keeps stopping and you aren’t able to proceed further, the best way to handle the situation is to repair the Android system. And the best that can help you to serve the purpose is Dr.Fone - System Repair (Android). It has the ability to fix any sort of Android system issue without any complications. To fix this issue, the tool only takes few minutes of yours and performs smoothly. Moreover, you don’t have to worry if you aren’t tech pro. This tool requires no special technical know-how. Here are the advantages you get with this tool.

Dr.Fone - System Repair (Android)

One click tool to fix “Unfortunately TouchWiz has stopped”

• A very easy tool that fixes problems in just one click
• Provides full support all day all night as well as offers 7 day money back challenge
• Enjoys higher success rate and considered as first tool carrying such amazing functionalities
• Able to fix wide variety of Android issues including app crashing, black/white screen of death
• Fully secured and no harm regarding any virus infection

3,211,972 people have downloaded it

Step 1: Download the Program

The one-click repairing process begins with downloading Dr.Fone from its official website. When it is downloaded, follow the installation steps. Upon successful installation, launch the tool on your PC.

Step 2: Connect your Tecno Spark 10C Device

After you open the software, hit on the “System Repair” button from the main interface. With the help of a genuine USB cable, get your Tecno Spark 10C phone and connect it with the computer.

Step 3: Choose the Tab

Now, from the next screen, you are supposed to choose “Android Repair” tab. It is given on the left panel.

Step 4: Enter Right Information

Please keep your mobile details handy as you will need them in the next window. You will need to enter the correct brand, model, and country name etc. for better detection of your device.

Step 5: Confirm Actions

This process may result in removing your data hence we strongly recommend you to keep a backup of your data.

Tip: You can use Dr.Fone – Phone Backup (Android) to backup your Tecno Spark 10C device in case you’re wondering how.

Step 6: Take your Device in Download mode

You will get some instructions on your screen to keep your device in Download mode. Follow them according to the Tecno Spark 10C device you own and hit “Next”. When you do this, the program will detect your device and let you download the latest firmware.

Step 7: Repair Device

Now, when the firmware is downloaded, the program will itself begin to repair your device. Wait and keep the Tecno Spark 10C device connected until you get the notification for process completion.

Clear the cache data the TouchWiz

Maximum Android devices are designed to deleted cache data upon getting updated to the newest Android system. However, Tecno Spark 10C stands as an exception in such case. And therefore, many times TouchWiz starts stopping right after upgrading. Thus, due to the collection of cache data, TouchWiz can display error. This calls for removing the cache from TouchWiz and run things smoothly. Here is how to do this:

• Tap on “Apps” from the Home screen firstly.
• Launch “Settings” afterwards
• Look for “Applications” and tap on it followed by “Application Manager”.
• When Application Manager gets opened, swipe towards right to get into the “All” screen.
• Now, choose “TouchWiz” and tap “Clear Cache”.
• Now, tap “Clear Data” followed by “OK”.
• Now restart your device.

Please note that this will delete all your Home screens post this method.

Disable Motion & gesture settings

The functions regarding Motions and Gestures can be responsible for why TouchWiz home has stopped in your device. Usually the Tecno Spark 10C devices running on Android version less than Marshmallow are prone to encountering this issue. Or the Tecno Spark 10C devices having modest specs often fall prey to the issue. When you disable these settings, you might get out of the problem.

Change the Animation Scale

When you use TouchWiz, it may consume higher memory usage for high amount of graphic maintenance. As a result, the “**unfortunately TouchWiz home has stopped**” error might crop up. Taking this into consideration, you should try reconfiguring the animation scale and get rid of the error. Here’s how:

Clear Cache Partition

In case the above steps didn’t figure out the problem, here is the next tip. This method can be counted as one of the most effective one. Because it is able to fix minor issues in Android devices, we recommend you for “**TouchWiz home has stopped**” issue too. Let us know how you can do it:

• Turn off your Tecno Spark 10C device.
• Start pressing and holding “Volume Up” and “Power” buttons simultaneously.
• Keep doing this until you see the Android screen. This will take your device into recovery mode.
• You will observe some options on the screen. Take help of Volume buttons, scroll down to choose “Wipe Cache Partition”. Press Power button to confirm and the Tecno Spark 10C device will be rebooted.

Check now if the error is eliminated. If unfortunately not, please try the following solution.

Enable the easy mode

For some users, enabling Easy Mode has been of great assistance. This feature aims to make the user experience more efficient by simply eliminating complex features. The Easy Mode removes those features that confuse the users by messing up the screen. Hence, we suggest you to switch to this mode in order to remove “**TouchWiz not working**” problem. The steps are:

• Open “Settings” and go to “Personalization”.
• Hit on “Easy Mode” now.

Hope the TouchWiz won’t keep stopping error does not pop up anymore!

Boot your phone to safe mode

Here is the next solution to be followed when TouchWiz keeps stopping. As we already said, third-party apps can cause this issue, booting your device in the Safe mode will disable those apps temporarily. Hence you need to boot your Tecno Spark 10C device to Safe mode and check if the reason is any third-party app.

• Switch off your device to initiate.
• Press “Power” button and keep doing this until device’s logo appears on the screen.
• When you see logo appearing, instantly release the button and start holding “Volume Down” button.
• Keep holding until rebooting finishes.
• You will now witness “Safe mode” on the bottom screen. You can now release the button.

Reset Factory settings

If the above method went futile and you’re still at the same place, then factory reset is the next logical step to be taken. We suggest this method because it will take your device to its factory state. As a result, TouchWiz will probably get normal and work perfectly.

Along with this, we would also suggest you go take backup of your data so that you won’t lose any of the personal information from your device after performing factory reset. For your convenience, we have stated the backup steps too in the following guide. Have a look:

• Run “Settings’ in your device and go to “Backup & Reset”.
• Notice if “Back up my data” is enabled or not. If not, turn it on and create backup.
• Now, scroll for “Factory Data reset” option and confirm it by clicking “Reset Phone”.

• Wait a few minutes and your device will reboot.

Install a new launcher to replace TouchWiz

We believe that you will find the above methods helpful. However, if still in case your TouchWiz is not working, we advice you that you should install a new theme launcher in your device. It will be a wise option to ditch TouchWiz in such scenario rather than tolerating the problem. Hope this advice will help you.

How to Quickly Fix Bluetooth Not Working on Tecno Spark 10C

One of the key features of an Android device these days is the Bluetooth technology. This is such an important part of the phone that many of us take for granted, but as soon as the feature stops working, it can cause all kinds of problems.

Fortunately, despite there being many reasons why a problem could occur to your Bluetooth feature, there are also plenty of fixes. Today, we’re going to share with you the complete guide that details everything you need to know to get your Bluetooth up and running once again as quickly as possible.

Let’s get straight into it!

Part 1. About Bluetooth Not Working on Android

Of course, the most common problem to occur with Bluetooth technology in your Tecno Spark 10C is when it doesn’t connect to the Tecno Spark 10C device you’re trying to link it to. This could be anything from a Bluetooth headset or headphones, to a portable speaker or even an in-car audio system.

However, the problems don’t stop there. You may have problems with turning your Bluetooth settings on through your actual device. Perhaps the software simply isn’t loading, or maybe the Bluetooth feature keeps turning itself off randomly.

Due to the complicated nature of Bluetooth technology, there could be many reasons as to why your Bluetooth feature is playing up in this way, but that doesn’t mean it can’t be fixed. For the rest of this guide, we’re going to explore the nine need-to-know ways you can fix the Bluetooth problems not working on your Tecno Spark 10C as quickly as possible.

Part 2. 9 fixes for Bluetooth not working on Android

2.1 One click to fix Android Bluetooth issues due to Android system

Since Bluetooth is an internal technology, this indicates there’s a problem with the software or firmware of your Tecno Spark 10C. If something’s broken, this means you need to fix it. Fortunately, there’s a quick and easy way to do this using software known as Dr.Fone - System Repair (Android).

Dr.Fone - System Repair (Android) is a powerful Android repair tool which is hailed as many as being on the best software applications in the industry. With all the tools you need to repair your phone not just for Bluetooth errors, but basically any internal firmware problems, this is a one-shot-tool that gets the job done.

Dr.Fone - System Repair (Android)

Android repair tool to fix Bluetooth issues in one click

• Can fix most internal software and firmware issues
• Trusted by over 50+ million people around the world
• Supports over 1,000+ unique Android brands, manufacturers, and devices
• Incredibly user-friendly and easy-to-use
• Compatible with all Windows computers

3981454 people have downloaded it

To ensure you have the best experience while using the Dr.Fone - System Repair (Android) software, here’s a complete step-by-step guide on how it works when fixing your Android’s Bluetooth problems.

Step One Make your way over to the Wondershare website and download the Dr.Fone - System Repair (Android) software to either your Mac or Windows computer. Install the downloaded file by following the on-screen instructions. Once installed, open the software, so you’re on the Main Menu.

Step Two Connect your Tecno Spark 10C to your computer using the USB cable, wait a couple of seconds, and then click the System Repair option. On the Menu on the left, click Android Repair, and then press Start.

Step Three Next, use the drop-down menus to make sure all the information about your specific device is correct, including your device, operating system number, and carrier information. Click Next to confirm your selections.

Step Four When prompted, put your phone into Download Mode needed for repairs. You can do this by following the on-screen instructions which will depend on which device you have and the available buttons.

Step Five The software will now begin the repair process. This will happen automatically, and all you’ll need to do is make sure your device doesn’t disconnect during this process, and your computer doesn’t turn off.

When the repair process has been completed, you’ll receive the screen below, which means you can try again if the process didn’t work, or you can disconnect your Tecno Spark 10C and start using it and your Bluetooth features.

2.2 Restart Android and turn on Bluetooth again

One of the most common solutions in technology is simply to turn it on and off again, which is the case to happen here. By restarting your device, you can clear out any problems you may be suffering from to help it get up and running again. Here’s how;

1. Turn your Tecno Spark 10C off by holding down the Power button
2. Wait for several minutes and then turn your phone on again
3. Wait for your phone to completely power up, so you’re on the Main Menu
4. Navigate Settings > Bluetooth and then enable the setting
5. Try to connect your Bluetooth device to what you were trying to do before

2.3 Clear the Bluetooth cache

Every service on your Tecno Spark 10C using a feature called a cache. This is where information is stored to help the feature run properly and give you the best experience. However, over time this can get messy and can cause problems with your Bluetooth feature.

By clearing the cache, you can restart the service and hopefully clear up any issues or problems you may be experiencing.

1. On your phone, navigate Settings > Application Manager, and you’ll see all the apps and services on your phone. Locate and select the Bluetooth service.
2. Select the Storage option
3. Tap the Clear Cache option
4. Go back of the Menu and restart your phone
5. Now turn your Bluetooth feature on and turn connecting it to your preferred device

2.4 Remove paired devices

Sometimes, you may have a problem with the Tecno Spark 10C device you’re trying to connect to via Bluetooth, especially if this is a device you’ve updated. To counter and repair this, you’re going to need to remove the paired devices saved with your device and then reconnect them.

Here’s how;

1. From the Main Menu of your Tecno Spark 10C, head to Settings > Bluetooth > Connected Devices.
2. Turn Bluetooth on, and you’ll see all the connections your Tecno Spark 10C is paired with
3. Go through these settings and remove/delete/forget every connection on your device
4. Now when you go to connect to a device using Bluetooth, repair the Tecno Spark 10C device, enter the passcode, and use a fresh paired connection.

2.5 Use Bluetooth in safe mode

If you’re having problems with your connection and paired devices, sometimes you may have conflicting software faults in your device that are causing the problems. If this is the case, you’ll need to boot your Tecno Spark 10C in Safe Mode.

This is an operating state in which your phone will run the bare minimum services it needs to perform. If your Bluetooth works in Safe Mode, you know you have an app or a service that’s causing the problem.

Here’s how to find out;

1. Hold the power button down, so the Android power menu turns on
2. Long-press the power button again and the restart in Safe Mode option will come up
3. The phone will automatically boot into Safe Mode
4. Wait a minute on the Main Menu
5. Now turn on your Bluetooth and connect it to your preferred device

2.6 Turn on the discoverable feature

To ensure your Bluetooth can connect to other devices, it’s important to make sure you’re making your device discoverable to other Bluetooth devices. If it’s hidden, other devices won’t be able to find it, and sometimes it can bug and prevent connections.

Here’s how to turn on your Bluetooth discoverable feature;

1. From the home screen of your Android, navigate to the Menu> Settings > Bluetooth
2. Toggle the Bluetooth switch, so it’s on
3. Under the available settings, tick the box that allows your Bluetooth device to be discoverable
4. Turn your Bluetooth feature on and connect to the Tecno Spark 10C device you’re trying to connect too

2.7 Exclude Bluetooth issues of the other device

Sometimes, you might not even have a problem with your Tecno Spark 10C, but rather the Bluetooth device you’re trying to connect to, whether that’s a Bluetooth speaker, an in-car entertainment system, or any other kind of Bluetooth device.

By testing out another Bluetooth device to see if it will work with your preferred device, you can rule this out from being the issue.

1. Disconnect your Tecno Spark 10C from the Bluetooth device and turn your Bluetooth off
2. Now take another Bluetooth device and connect this to the Tecno Spark 10C device you’re trying to connect too. This could be another Android device, or even a computer or iOS device
3. If the new device doesn’t connect to your Bluetooth device, you’ll know there’s a problem with your Bluetooth device, not your Tecno Spark 10C
4. If the Tecno Spark 10C devices connect, you’ll know there’s a problem with your Tecno Spark 10C

2.8 Place both devices within close proximity

One of the common misconceptions of Bluetooth is just how far the wireless range is of the service. You need to make sure your devices are well and truly close to each other to make sure a stable connection can be formed.

The further away the Tecno Spark 10C devices are from each other, the less likely the connection will remain secure. As a rule of thumb, Bluetooth can work up to 100 meters, but to play it safe, always try and keep your devices under 50m apart.

2.9 Avoid interference of other Bluetooth sources

The final consideration you’ll want to think about is that Bluetooth radio waves, or wireless waves, can interfere with each other. This means they can bounce off each other or get muddled up and make things confusing from your devices.

With this in mind, you’ll want to make sure you’re limiting the amount of Bluetooth activity in the area where you’re trying to use a device. While uncommon, this could be the problem.

To fix this issue, turn off all the Bluetooth connections in the area. This includes computers, laptops, mobile phones, tablets, and any other Bluetooth devices you may have. Then, try connecting your Tecno Spark 10C to the Tecno Spark 10C device you were trying to use. If it works, you know you were experiencing Bluetooth interference.

How To Unbrick a Dead Tecno Spark 10C

Discovering your phone died, especially among Tecno Spark 10C models, can be disheartening. Looking online for ways to unbrick your Oneplus 8T can take up so much of your time. The unavailability of your device can disrupt your routine and connectivity. However, unbricking is the crucial solution to regain the functionality of your Tecno Spark 10C device.

This guide teaches effective methods to unbrick your Tecno Spark 10C. The page will also discuss the early warning signs and healthy habits to prolong your Tecno Spark 10C. Read below to learn more.

Part 1. Early Warning Signs of a Hard-bricked One Plus Device

When a phone “bricks,” the Tecno Spark 10C device becomes completely unusable and non-functional. It essentially turns into a “brick.” A bricked Tecno Spark 10C device can be preceded by certain warning signs that you should be attentive to. Here are some of them below.

• **Corrupted Device and Boot Failures.**If your Tecno Spark 10C freezes or fails to boot up properly, it can indicate underlying software issues that might lead to bricking.
• **Inability to Enter Fastboot Mode.**If you find it increasingly challenging to access the fastboot mode, it could signify impending trouble.
• **Consistent Black Screens.**Experiencing recurring black screens could indicate problems within the operating system. In the long run, this might escalate to bricking.
• **Unexpected Reboots and Crashes.**Frequent and unprovoked reboots, app crashes, and system instability might point toward software inconsistencies. Similar to consistent black screens, this could eventually lead to bricking.

Common Reasons for Your Tecno Spark 10C Phone To Be Bricked

Understanding the factors that can trigger bricking in Tecno Spark 10C devices is essential for preventing such scenarios.

Failed Updates or Interrupted Installations

When a firmware update is interrupted due to power loss, sudden device shutdown, or other disruptions, it can result in incomplete software installation and potential bricking.

Unauthorized User Modifications

Engaging in root access, flashing custom ROMs, or applying unsupported system modifications can destabilize the Tecno Spark 10C device’s software, paving the way for bricking.

Incorrect Bootloader Unlocking

Mishandling the process of unlocking the bootloader, a crucial step for customization can lead to system inconsistencies and eventual bricking.

Compatibility Issues With Custom Software

Installing unofficial custom software, such as custom recoveries or third-party kernels, might not be compatible with the Tecno Spark 10C device’s hardware or official software. That can cause conflicts that can lead to bricking.

Malware or Virus Infiltration

The presence of malicious software can cause significant disruptions to the Tecno Spark 10C device’s functioning. It can lead to bricking if left unchecked.

Part 2. How To Unbrick One Plus Device Using Various Methods

The solutions below to unbrick your Oneplus are helpful methods to revive your device. Here’s an overview of these methods.

Method 1. Restore With Recovery Mode

Restoring using Recovery Mode can solve most problems that cannot be solved with a normal phone restart. Here’s how.

• Step 1: Turn off your Tecno Spark 10C device. Press and hold the Power button and Volume Down until the Tecno Spark 10C logo is displayed.

• Step 2: Move through the menu using the Volume Up and Volume Down buttons until you reach Recovery Mode. Press the Power button to choose it.
• Step 3: Select the Wipe data/factory reset option. Choose Yes to proceed and wait for the process to finish. Choose Reboot system now to see the results.

Method 2. Contact the Manufacturer

Engaging Tecno Spark 10C’s official support can provide insights and potential solutions. This is advantageous if your device is under warranty.

Method 3. Professional Repair Shops

Certified repair shops have the expertise to diagnose and address bricking issues, offering tailored solutions.

Method 4. Software Tools

Leveraging specialized software tools like Wondershare Dr.Fone - System Repair (Android) simplifies the process, even for non-technical users.

Part 3. Healthy Habits To Consider To Prolong Your One Plus

Maintaining the longevity of your Tecno Spark 10C device requires adopting proactive habits. Here are vital tips to consider.

• **Regular Software Updates.**Keep your Tecno Spark 10C up to date with the latest firmware releases. These updates often include security patches, bug fixes, and feature enhancements contributing to overall device stability.
• **Battery Care.**Avoid frequent deep discharges and overcharging. Use original charging accessories and refrain from exposing the Tecno Spark 10C device to extreme temperatures.
• **App Management.**Review and uninstall apps you no longer use. This reduces clutter and conserves system resources, promoting smoother device operation.
• **Cache and Storage Cleanup.**Clear app caches and delete unnecessary files from your device. It optimizes storage space and prevents sluggishness caused by excessive data accumulation.
• **Screen Protection.**Apply a screen protector and sturdy phone case to shield your device from scratches, cracks, and impacts. This safeguards the physical integrity of your Tecno Spark 10C.
• **Safe Charging Practices.**Avoid using your device while charging, as this generates excess heat. Also, refrain from using non-certified chargers, which can harm the battery and device components.
• **Avoid Overloading the Tecno Spark 10C device.**Limit multitasking and avoid running too many apps simultaneously. This minimizes strain on the Tecno Spark 10C device’s RAM and processor, ensuring smoother performance.
• **Privacy and Security.**Implement robust, unique passwords and enable biometric authentication methods. Regularly review app permissions to enhance data privacy.

Tips: Unlock Your One Plus 6, 8T, or 10 Pro With Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) is powerful software designed to unlock Tecno Spark 10C devices quickly. This tool is compatible with various Tecno Spark 10C models, including the Tecno Spark 10C 6, Tecno Spark 10C, and Tecno Spark 10C 10 Pro, ensuring a wide support reach.

Dr.Fone - Screen Unlock (Android)

Unlock Tecno Spark 10C Without Password

• Unlock your Tecno Spark 10C quickly and securely
• Easily remove passwords and screen locks of all types
• Enjoy a streamlined experience with no technical background required
• Feel confident with solutions backed by a high success rate

3,016,652 people have downloaded it

How To Unlock Your One Plus With Dr.Fone - Screen Unlock (Android)

Below is a guide on unbricking the Tecno Spark 10C models using Dr.Fone - Screen Unlock (Android).

Step 1: Access Screen Unlock > Android

Navigate to the Screen Unlock section and select Android. Proceed by clicking on the Unlock Android Screen option.

Step 2: Choose Your Device Brand and Initiate Data Wipe

Identify your device brand for unlocking the screen. After selecting your device brand, you will be prompted to enter a specific mode. Once in this mode, Dr.Fone will commence the Android screen unlock process.

Step 3: Successful Screen Unlock

Allow the unlock process to run its course. If unsuccessful, click ‘Try Again’ for a second attempt. Upon successful screen unlock, click ‘Done’.

safe & secure

You May Also Like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update

iPhone Got Bricked? Here Is The Real Fix To Unbrick It!

How to Fix It If Your Tecno Spark 10C Phone Got Bricked?

How to Fix the Soft Bricked Android Phone?

Conclusion

For Tecno Spark 10C owners, your device’s revival rests in your hands. By embracing the abovementioned methods, you can reclaim your device from its bricked state. Act decisively to unbrick your Tecno Spark 10C device and relish its seamless performance again.

For those who find themselves locked out of their Tecno Spark 10C devices, there’s a reliable solution at your fingertips. Try Dr.Fone - Screen Unlock (Android) to regain access to your device swiftly and securely.

safe & secure

Also read: