9 Quick Fixes to Unfortunately TouchWiz has stopped Of Vivo V30 Pro

“Unfortunately TouchWiz home has stopped” is the talk of the town due to annoying TouchWiz UI, a front-end user interface developed by Vivo V30 Pro. Not to mention, the Vivo V30 Pro has borne a whole lot of heat from its agitated users over the years and the reason is pretty much obvious due to the pre-installed bloatware apps and the theme launch “TouchWiz home”. That not just brutally annoys users and eats up a heck of internal storage space but lags up too often due to low speed and stability. As a result users end up with “Unfortunately TouchWiz home has stopped” and “Unfortunately, TouchWiz has stopped”. Apparently, there are several flaws in the design and functioning of this launcher and hence, Touchwiz keeps stopping or becomes unresponsive.

Part 1: Common scenarios when TouchWiz keeps stopping

Here in this section, we will introduce some scenarios that can be blamed for why TouchWiz is not working. Check out the following points:

More often than not, the TouchWiz keeps stopping after an Android update. When we update our Vivo V30 Pro device, the old data and cache usually conflicts with TouchWIz thereby cropping up this mess.
When you disable some built-in apps, you might get in trouble with TouchWiz. Doing this sometimes can hamper the TouchWiz operation and raise the “**unfortunately TouchWiz home has stopped**” error message.
Many times installing some third-party apps and widgets can cause this problem. The apps like launchers can be conflicting with TouchWiz home launcher and therefore cease it to work. Also, a glitched widget is responsible for the same i.e. forces stop the TouchWiz.

Part 2: 9 Fixes to “Unfortunately TouchWiz has stopped”

Fix “TouchWiz keeps stopping” by repairing Android system

When your TouchWiz keeps stopping and you aren’t able to proceed further, the best way to handle the situation is to repair the Android system. And the best that can help you to serve the purpose is Dr.Fone - System Repair (Android). It has the ability to fix any sort of Android system issue without any complications. To fix this issue, the tool only takes few minutes of yours and performs smoothly. Moreover, you don’t have to worry if you aren’t tech pro. This tool requires no special technical know-how. Here are the advantages you get with this tool.

Dr.Fone - System Repair (Android)

One click tool to fix “Unfortunately TouchWiz has stopped”

A very easy tool that fixes problems in just one click
Provides full support all day all night as well as offers 7 day money back challenge
Enjoys higher success rate and considered as first tool carrying such amazing functionalities
Able to fix wide variety of Android issues including app crashing, black/white screen of death
Fully secured and no harm regarding any virus infection

3,211,972 people have downloaded it

Step 1: Download the Program

The one-click repairing process begins with downloading Dr.Fone from its official website. When it is downloaded, follow the installation steps. Upon successful installation, launch the tool on your PC.

Step 2: Connect your Vivo V30 Pro Device

After you open the software, hit on the “System Repair” button from the main interface. With the help of a genuine USB cable, get your Vivo V30 Pro phone and connect it with the computer.

Step 3: Choose the Tab

Now, from the next screen, you are supposed to choose “Android Repair” tab. It is given on the left panel.

Step 4: Enter Right Information

Please keep your mobile details handy as you will need them in the next window. You will need to enter the correct brand, model, and country name etc. for better detection of your device.

Step 5: Confirm Actions

This process may result in removing your data hence we strongly recommend you to keep a backup of your data.

Tip: You can use Dr.Fone – Phone Backup (Android) to backup your Vivo V30 Pro device in case you’re wondering how.

Step 6: Take your Device in Download mode

You will get some instructions on your screen to keep your device in Download mode. Follow them according to the Vivo V30 Pro device you own and hit “Next”. When you do this, the program will detect your device and let you download the latest firmware.

The Tube Sites Submitter is a fast and efficient tool for anyone who needs to upload videos quickly, easily and automatically to hundreds of tube sites in mere minutes .

Step 7: Repair Device

Now, when the firmware is downloaded, the program will itself begin to repair your device. Wait and keep the Vivo V30 Pro device connected until you get the notification for process completion.

TubeDigger - online video downloader from mostly any site

Clear the cache data the TouchWiz

Maximum Android devices are designed to deleted cache data upon getting updated to the newest Android system. However, Vivo V30 Pro stands as an exception in such case. And therefore, many times TouchWiz starts stopping right after upgrading. Thus, due to the collection of cache data, TouchWiz can display error. This calls for removing the cache from TouchWiz and run things smoothly. Here is how to do this:

Tap on “Apps” from the Home screen firstly.
Launch “Settings” afterwards
Look for “Applications” and tap on it followed by “Application Manager”.
When Application Manager gets opened, swipe towards right to get into the “All” screen.
Now, choose “TouchWiz” and tap “Clear Cache”.
Now, tap “Clear Data” followed by “OK”.
Now restart your device.

Please note that this will delete all your Home screens post this method.

Disable Motion & gesture settings

The functions regarding Motions and Gestures can be responsible for why TouchWiz home has stopped in your device. Usually the Vivo V30 Pro devices running on Android version less than Marshmallow are prone to encountering this issue. Or the Vivo V30 Pro devices having modest specs often fall prey to the issue. When you disable these settings, you might get out of the problem.

Change the Animation Scale

When you use TouchWiz, it may consume higher memory usage for high amount of graphic maintenance. As a result, the “**unfortunately TouchWiz home has stopped**” error might crop up. Taking this into consideration, you should try reconfiguring the animation scale and get rid of the error. Here’s how:

Greeting Card Builder

Clear Cache Partition

In case the above steps didn’t figure out the problem, here is the next tip. This method can be counted as one of the most effective one. Because it is able to fix minor issues in Android devices, we recommend you for “**TouchWiz home has stopped**” issue too. Let us know how you can do it:

Turn off your Vivo V30 Pro device.
Start pressing and holding “Volume Up” and “Power” buttons simultaneously.
Keep doing this until you see the Android screen. This will take your device into recovery mode.
You will observe some options on the screen. Take help of Volume buttons, scroll down to choose “Wipe Cache Partition”. Press Power button to confirm and the Vivo V30 Pro device will be rebooted.

Check now if the error is eliminated. If unfortunately not, please try the following solution.

Enable the easy mode

For some users, enabling Easy Mode has been of great assistance. This feature aims to make the user experience more efficient by simply eliminating complex features. The Easy Mode removes those features that confuse the users by messing up the screen. Hence, we suggest you to switch to this mode in order to remove “**TouchWiz not working**” problem. The steps are:

Open “Settings” and go to “Personalization”.
Hit on “Easy Mode” now.

Hope the TouchWiz won’t keep stopping error does not pop up anymore!

Boot your phone to safe mode

Here is the next solution to be followed when TouchWiz keeps stopping. As we already said, third-party apps can cause this issue, booting your device in the Safe mode will disable those apps temporarily. Hence you need to boot your Vivo V30 Pro device to Safe mode and check if the reason is any third-party app.

Switch off your device to initiate.
Press “Power” button and keep doing this until device’s logo appears on the screen.
When you see logo appearing, instantly release the button and start holding “Volume Down” button.
Keep holding until rebooting finishes.
You will now witness “Safe mode” on the bottom screen. You can now release the button.

LYRX is an easy-to-use karaoke software with the professional features karaoke hosts need to perform with precision. LYRX is karaoke show hosting software that supports all standard karaoke file types as well as HD video formats, and it’s truly fun to use.
LYRX Karaoke Software MAC/WINDOWS (Includes Activation For 3 Machines)

Reset Factory settings

If the above method went futile and you’re still at the same place, then factory reset is the next logical step to be taken. We suggest this method because it will take your device to its factory state. As a result, TouchWiz will probably get normal and work perfectly.

Along with this, we would also suggest you go take backup of your data so that you won’t lose any of the personal information from your device after performing factory reset. For your convenience, we have stated the backup steps too in the following guide. Have a look:

Run “Settings’ in your device and go to “Backup & Reset”.
Notice if “Back up my data” is enabled or not. If not, turn it on and create backup.
Now, scroll for “Factory Data reset” option and confirm it by clicking “Reset Phone”.

Wait a few minutes and your device will reboot.

Install a new launcher to replace TouchWiz

We believe that you will find the above methods helpful. However, if still in case your TouchWiz is not working, we advice you that you should install a new theme launcher in your device. It will be a wise option to ditch TouchWiz in such scenario rather than tolerating the problem. Hope this advice will help you.

What To Do When Vivo V30 Pro Has Black Screen of Death?

Have you ever got the error of freezing the Android device home screen? Or the notification light keeps blinking without anything shown on display? Then you are facing Android black screen of death.

This scenario is common with many Android mobile users, and they always hunt for solutions to get rid of this Android black screen problem. Here are some more situations that can assure you that you are facing Android black screen of death.

The light of the phone is blinking but the Vivo V30 Pro device is not responding.
The phone is hanging and freezing very frequently.
The mobile is rebooting and crashing more often and the battery is draining a lot faster.
Phone restarts on its own.

If you face these situations, you might be facing the Android black screen of death issue. Follow this article, and we’ll discuss how to get rid of this annoying problem at ease.

Part 1: Why Android device gets black screen of death?

Similar to the “Blue Screen of Death “ (BSOD) on computers, the Android Black Screen of Death indicates a severe system crash or malfunction. When this issue occurs, the Vivo V30 Pro device’s display remains blank, and you are unable to interact with the Vivo V30 Pro device, access apps, or perform any actions. The cause of the Android black screen of death can vary, but some common factors include:

Install incompatible apps or apps with bugs and viruses.
Have bugs or errors in the Android operating system.
Keep the mobile charged for long after it’s fully charged.
Use a non-compatible charger.
Use an old battery.
Incorrectly install or incomplete system updates.
Excessive heat due to heavy usage or environmental factors.

If you face the situations mentioned above, this is clearly a case of the Android screen black. But don’t worry about that. You can follow the article below to get rid of this situation on your own.

Part 2: How to rescue data when Android gets black screen of death?

This annoying Android black screen of death is making it impossible to access your internal data. So, the possibility is that you might lose all the data. We have a solution for all of your data recovery problems from a damaged Android device.

The solution for recovery data is the Dr.Fone - Data Recovery (Android) toolkit by Wondershare. This tool is highly appreciated worldwide and very popular for its feature-rich user interface. This tool can perform a lot of functions that can successfully recover the data from a damaged device.

Use this revolutionary toolkit to get the data back from the black tablet screen of death. Connect the Vivo V30 Pro device with the PC after installing this tool and follow the on-screen instruction, and all of your data will be transferred to your PC. Unfortunately, the tool is supported on selected Vivo V30 Pro Android devices as of now.

Dr.Fone - Data Recovery (Android)

A Dedicated Tool to Retrieve Data from Broken Android Devices .

Recover data from broken devices or devices that are damaged in any other way, such as those has black screen.
Recover photos, videos, contacts, messages, call logs, and more.
Highest retrieval rate in the industry.
Compatible with most Vivo V30 Pro devices.

3981454 people have downloaded it

Part 3: 9 Solutions to fix the black screen of death of Android

Home Use license is dedicated for personal, non-commercial use only.
If Action! is used for commercial gain or to further any commercial purpose,
a Commercial Use license is required. Multi-license (volume discount) is intended for single

company, user or members of the same household. Action! - screen and game recorder</a>

Any DRM Removal for Win：Remove DRM from Adobe, Kindle, Sony eReader, Kobo, etc, read your ebooks anywhere.

3.1 One click to fix the black screen of death

Facing an Android device with a black screen of death, I believe, is one of the gloomiest moments of one’s life, especially for those who know little about the technical part of Android. But here is the truth we have to admit: most cases of the black screen of death arise due to system glitches in Android.

What to do? Shall we find someone who is tech-savvy to seek help? Come on, this is the 21st century, and there are always one-click solutions to deal with technical issues for laymen like you and me.

Dr.Fone - System Repair (Android)

Fix Black Screen of Death for Android In One Click

Fix all Android system issues like a black screen of death, OTA update failures, etc.
Update the firmware of Android devices. No technical skills are required.
Support all the new Vivo V30 Pro devices like Galaxy S22, S23, etc.
Click-through operations to bring Android out of the black screen of death.

3,364,231 people have downloaded it

Here are the easy steps to get your Vivo V30 Pro out of the black screen of death:

Download and install the Dr.Fone tool. After launching it, you can see the following screen pop up.

![fix android black screen of death using a tool](https://images.wondershare.com/drfone/guide/drfone-home.png)

Select “System Repair” from the home page, and then click on the “Android “.

![fix android black screen of death by selecting the repair option](https://images.wondershare.com/drfone/guide/android-system-repair-1.png)

Click “Start” to commence the Android system repair. In the next screen, select and confirm your Android model details like name, model, country, etc. and go on.
Boot your Android into Download mode by following the on-screen demonstrations.
Then the tool will download the Android firmware and flash the new firmware to your Vivo V30 Pro.
A moment later, your Vivo V30 Pro will be repaired completely, and the black screen of death will be fixed.

![android brought out of black screen of death](https://images.wondershare.com/drfone/guide/android-system-repair-9.png)

Video guide: How to fix the Android black screen of death step by step

safe & secure

3.2 Force restart your Vivo V30 Pro

Because it is the quickest and most painless solution, most people do this when their Android phone screen goes black too fast. The majority of phone issues can be resolved by performing a hard reboot. Here are the necessary measures if you haven’t tried this method before.

To reboot your Vivo V30 Pro, you may need to press a specific key combination, depending on the model you have, but most Android devices can be force restarted by doing the following steps:

Step 1: Press and hold the power button for about 10-15 seconds. Keep holding it until the Vivo V30 Pro device restarts.

Step 1: For Vivo V30 Pro devices, press and hold down the Power and Volume Down buttons for about 7 seconds.

3.3 Check and clean your phone

This method might not be popular with Android users, but this can do wonders when dealing with an Android black screen of death issue. To do this, follow the steps provided below:

Step 1: Ensure your phone’s buttons and ports are not stuck before anything else.

Step 2: See if dirt prevents you from turning the Vivo V30 Pro device on. Then, quickly press and release the button a few times.

Step 3: If the phone isn’t charging normally, ensure the charging port isn’t clogged with dust and debris by checking and cleaning it. You can gently blow out any debris in the charging port or use a wooden toothpick to pry it open.

Step 4: After you’re done with the cleaning, it’s best to charge the phone for at least 10 minutes. Just give it a quick charge and then try to restart it.

3.4 Remove the battery

If your phone’s battery is removable, you can try taking it out and trying again if restarting and cleaning it doesn’t fix the problem.

Step 1: To get started, take the phone apart by starting at the back.

Step 2: After 20 to 30 seconds, take out the battery and put it back in.

Note: When replacing the battery, ensure the metal contacts correctly connect to the phone.

This easy and straightforward method should help you fix your Android screen black issue, but if it doesn’t, continue reading, as this article got more techniques you can try.

3.5 Recharge the Vivo V30 Pro device

If your Vivo V30 Pro screen suddenly goes black, let the battery die completely. Then once the battery is completely dead, you should plug it in to charge and turn it on by pressing the Power button. Try to check if you still encounter the issue after doing so.

3.6 Wipe cache partition to fix black screen of death

If your Vivo V30 Pro turns on, but the screen remains black, clearing the cache partition should solve the problem. After all, keeping caches on your phone would cause it to run more slowly and cause other problems. Therefore, the issue can be resolved by clearing the cache partition. Check the following steps on how to do this below:

Step 1: Turn off your Vivo V30 Pro.

Step 2: Boot the Vivo V30 Pro device into Recovery Mode.

Note: The steps necessary to enter recovery mode will vary depending on your specific Android phone model. To ensure you’re doing the correct steps for your device, consult the user manual or look it up online. The following instructions work for Vivo V30 Pro devices:

For older Vivo V30 Pro devices with the home button: Press and hold the Volume Up button, the Power button, and the Home buttons simultaneously.
For newer Vivo V30 Pro devices without the home button: Press and hold the Volume Up button and the Power button together.
If the Vivo V30 Pro device logo appears, release your grip, and the phone will restart.

Step 3: Find the Wipe cache partition option using the volume controls after entering Recovery Mode.

Step 4: Select Wipe cache partition by pressing the Power button.

Step 5: On the next screen, use the Volume Down button to highlight “Yes” and then press the Power button to confirm the cache wipe.

Step 6: The cache partition will be wiped, and you will see the “Cache wipe complete” message on the screen.

Step 7: Use the Volume Down button to navigate to the “Reboot system now” option and press the Power button to reboot your Vivo V30 Pro device.

After rebooting, you can see that you have successfully got rid of the annoying Android black screen of death. For most of the cases, this method solves the problem. If not, you have to move to the next method.

3.7 Uninstall incompatible apps

Android screen black can be a result of installing a bug or incompatible apps. If you have recently installed an app that crashes frequently, that may be the reason for the issue. Uninstalling the app from the Vivo V30 Pro device may solve the problem with ease. For doing this, you need to boot your device in Safe mode. Follow the below steps.

Step 1: Power down your device by pressing and holding the Power button until a menu appears.

Step 2: Navigate to Safe Mode by pressing and holding the Power Off button.

Step 3: Tap the “Safe mode” icon to enter Safe mode. You should now see Safe Mode at the Vivo V30 Pro device’s bottom.

Step 4: After selecting Settings, head to the Apps section.

Step 5: Select the app by clicking on it; the App Info window should appear. To uninstall the app, tap the Uninstall option from the menu below the screen.

Step 6: Now restart the Vivo V30 Pro device by pressing the power button and let it boot up in normal mode.

If the app is the reason for Android black screen of death, then after uninstalling, you can get rid of this issue. If not, now you have to factory reset your device to solve the problem.

3.8 Reboot to safe mode

Even after multiple attempts to launch them, certain applications act suspiciously and cause the Vivo V30 Pro device to crash. When an Android phone suddenly goes black, you can often isolate the problem to a specific app by booting into Safe mode.

Step 1: Begin by restarting your phone. To do that, press the Power button until a menu appears.

Step 2: Press the Power Off button to enter Safe mode.

Step 3: Activate Safe mode by clicking the “Safe Mode” icon.

Step 4: To return to Normal mode, turn off your device and then turn it back on.

3.9 Factory reset to fix Android black screen of death

The factory reset is the option that enables the factory state of your device by erasing all data, settings, bugs, and apps. Your device will be fresh like factory condition after this reset. Worth mentioning here, you’ll lose all the internal data and installed apps after this reset. So, to overcome the Android tablet black screen of death, you must perform this action as the last option. Follow the below steps carefully.

Step 1: Turn off the Vivo V30 Pro device. Then press the Volume Up + Power button + home button (or press Volume Up + Power buttonS) altogether and let the mobile boot into recovery mode.

Step 2: After booting up in recovery mode, you can find the “Factory data reset” option. Navigate to that option with the volume up and down arrow and select it with the power button.

Step 3: In this step, you need to confirm your action by tapping on the “Yes” option. After this, your device will start erasing. This may take a while to complete the whole process.

Now, your device will reboot automatically and you can see the Android black screen of death problem is solved.

Part 4: How to avoid Android black screen of death?

These are the general methods to overcome the situation of Android screen black. But to avoid this situation, here are a few tips to follow –

Install apps from trusted suppliers only.
Use security or antivirus software on your device.
Take a backup at regular intervals.
Always keep Android OS updated.
Don’t keep your mobile charged for a long duration after a full charge.
If your battery gets old, replace it soon.
Keep your device’s storage well-maintained. Regularly delete unnecessary data.
Close unused apps running in the background to conserve system resources.
Prevent phone overheating by avoiding excessive usage, and not exposing it to direct sunlight for extended periods.

By following these steps, you should avoid the most unpleasant situations, such as the Android screen black. We all know that “Prevention is always better than cure”.

The Bottom Line

There could be a lot of reasons why an Android black screen issue occurs, but the important thing is knowing the correct ways how to fix it. And this article has covered nine proven methods to help you fix an Android phone screen black problem.

But among the methods discussed above, Dr.Fone – System Repair just stood out as this program does not only help you with a black screen of death problem, but it covers many other Android system issues too. It’s also a highly intuitive program that requires no skills to operate.

safe & secure

How to Fix Android App Not Installed Error on Vivo V30 Pro Quickly?

App not installed on Android is no more an unknown Error Code during Application installation as many people experience it on a day-to-day basis. An “Application not installed” error message usually pops up when you are trying to download and install an App with a .apk file extension from somewhere other than the Google Play Store. The error is very confusing at first but makes sense when you realize that this unknown Error Code during Application installation is neither a software issue nor a hardware problem. It is a direct outcome of what you do with your device. Yes, you heard that right. Your faulty actions can cause Android App not installed error.

What to do when trying to install the Android APK it says “app not installed”? It is terrible that you can’t install App on your device. But in this article, you will know more about the causes behind this error and the best ways to fix it, read on, here is all you need to know.

Part 1: Common reasons for the “Android App not installed” error

You may ask: Why can’t I download apps on my Vivo V30 Pro? Understanding the underlying causes of the “Android App Not Installed” error is crucial for resolving the issue effectively. So, what are the reasons for Android App not installed error? Given below are a few reasons:

1. Insufficient storage

Android software and if data such as photos, videos, music, messages, apps, contacts, emails, etc are stored in the internal memory there is not adequate storage left for another App, leading to Android App not installed error.

2. Corrupted/Contaminated App file

When you do not download Apps from the Play Store and choose another platform to do so, App files are usually corrupted and hence cannot be installed on your device smoothly. You should be doubly sure of the source from where you download an App, check its extension name, and make an effort not to install contained files.

3. SD Card not mounted in the Vivo V30 Pro device

At times your phone could be connected to your PC or another electronic device that can access the SD Card from your device. In such situations when you install an App and choose to save it to your SD Card, you will see Android App not installed error because the App cannot find the SD card as it is not mounted in your device.

4. Storage location

You must be aware that certain Apps work their best when stored in the Vivo V30 Pro device’s internal memory, whereas others need to be located on an SD Card. If you do not save the App in an appropriate location, you will find that the App isn’t installed because of an unknown Error Code.

5. Corrupt storage

Corrupted storage, especially a corrupted SD Card, is known to cause the Android App isn’t installed error. Even the internal storage can get clogged due to unnecessary and unwanted data, some of which might contain an element that disturbs the storage location. Take this issue seriously as a corrupted SD Card and even clogged up internal memory can put your device in danger.

6. Application Permission

Software operations running in the background and App Permission are not new concepts. Such errors can also cause the Unknown Error Code during App installation.

7. Incorrect file

If you already have an App installed but download another variant of it having a distinct signed or unsigned certificate can also make the Android App not installed error pop-up. This sounds technical, but this and all the other reasons listed above can be tackled by you.

The Unknown Error Code during Application installation can occur due to any one or more of the reasons stated above. So read them carefully and understand them well to avoid such glitches in the future.

Part 2: One-click to fix App not installed on Android error

So App not installed on your Vivo V30 Pro or tablet? The most horrible part is that this issue may come out of the corruption in the system files. In this situation, Android apps won’t be installed no matter what measures you take. Android system repair is the only effective solution to deal with this issue.

Android system repair used to require high technical skills. But most of the users know little about technical things. Well, worry not! Dr.Fone - System Repair (Android) allows you to repair Android easily, that is, complete the fix with just one click.

Screensaver Factory, Create stunning professional screensavers within minutes. Create screensavers for yourself, for marketing or unlimited royalty-free commercial distribution. Make screensavers from images, video and swf flash, add background music and smooth sprite and transition effects. Screensaver Factory is very easy to use, and it enables you to make self-installing screensaver files and CDs for easy setup and distribution. Screensaver Factory is the most advanced software of its kind.

Dr.Fone - System Repair (Android)

A powerful tool to fix the “Android App not installed” error in one click

Fix all Android system issues like Android App not being installed, the system UI not working, etc.
One-click to fix Android App not installed. No technical skills are required.
Support all the new Vivo V30 Pro devices, etc.
On-screen instructions are provided to prevent any misoperation.

3981454 people have downloaded it

Note: Getting your Android system repaired may erase the existing device data. It is recommended that you should back up your Android data before starting the Android repair.

The following steps illustrate how to fix the “Android App not installed” error in one click:

Install Dr.Fone on your Windows. After that, launch it, and click “System Repair”. Connect your Android to the computer.

Select the “Android” option and click “Start”.

Select device information, such as brand, name, model, country, etc., from each field, and type “Next”.

vMix Pro - Software based live production. vMix Pro includes everything in vMix 4K plus 8 channels of Replay and 8 vMix Call
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

Follow the on-screen instructions to boot your Android in download mode, and allow the tool to download the firmware to your device.

With Screensaver Wonder you can easily make a screensaver from your own pictures and video files. Create screensavers for your own computer or create standalone, self-installing screensavers for easy sharing with your friends. Together with its sister product Screensaver Factory, Screensaver Wonder is one of the most popular screensaver software products in the world, helping thousands of users decorate their computer screens quickly and easily.

After the firmware is downloaded, the tool will start to repair your Android, hereby fixing the “Android App not installed” error.

safe & secure

Part 3: How to fix App not installed error on Android

We understand that it can be a tricky situation to be in when Android App not installed error pops up, but what if we tell you can get rid of it in easy and simple steps? Yes, there is!

#1. Delete unnecessary files/Apps

Insufficient storage can prevent the app from being installed. Make some storage space on your device by cleaning unwanted data and deleting extra media and other files. You can also get rid of heavy Apps by:

Visiting “Settings” on your device. Then select “Manage apps”, “Application Manager” or “Apps” (varies based on device model or version) from the list of options before you.

Now select the App you wish to uninstall and wait for the App Info screen to open, then click on “Uninstall” as shown in the screenshot.

You can also uninstall the unnecessary application on the home screen, just long-press the app you want to uninstall until you see the “uninstall” icon. Click “Uninstall”, then, you need to click “OK” to confirm the uninstall process.

#2. Use only Google Play Store

As you are all aware, the Play Store is specially designed for Android software and contains only trusted and safe Apps. It is often known as the “Android Market” because it is loaded with different types of Apps to stiffly all your needs so that you don’t have to rely on other third-party sources to purchase/install Apps.

PCDJ DEX 3 for Windows & MAC is the total entertainment DJ software solution, offering audio, video, and karaoke mixing ability. Automatic beat-sync, smart looping, 4 decks, DJ MIDI controller support, Karaoke Streaming and much more.
DEX 3 meets the demands of today’s versatile DJ, without compromise!
DEX 3 (Audio, Video and Karaoke Mixing Software for Windows/MAC | 3 Activations and Free Updates)

#3. Mount your SD Card

Another remedy for Android App not installed error is to make sure that the SD card inserted in your device is not inaccessible.

To check the same:

First, disconnect your Vivo V30 Pro from your PC and then visit “Settings” on your Android and select “Storage” from the options that appear. Finally, click on “Mount SD Card” at the Storage Info screen.

You can now restart your device and try to install the app now, it should work!

#4. Choose App location wisely

It is advisable to not tamper with the App’s location and let the software decide where it needs to be placed. As far as possible, let the Apps be in your device’s internal memory.

#5. Format SD Card

The chances of your SD Card being corrupted are very high. You can format it either while it is in your device or externally.

Now to Clean up your SD Card, simply visit “Settings” and select “Storage” and tap on “Format SD Card” and mount it once again to use it smoothly.

#6. App Permissions

You can reset App permissions to combat the Android App not installed error by Visiting “Settings” and then selecting “Apps”. Now access the Apps menu and hit “Reset App Preferences” or “Reset application permissions”. This will allow third-party apps to get installed on your device.

#7. Choose the correct App file

Make sure to always download an App file only from a trusted and safe source to avoid any errors during installation.

#8. Reboot your device

Finally, if nothing else works, restart your device to end all operations which could be causing the said error. To reboot, just press the power button till you see a pop-up. Select “Restart” and wait for your device to reboot.

Conclusion

Encountering the “App Not Installed” error on Android can be frustrating, but by understanding the causes and implementing the appropriate solutions, you can overcome this issue. We saw that Android App not installed error can be fixed quickly if you keep in mind the tips given in this article. However, please ensure that you follow each instruction carefully to avoid any further goof up.

safe & secure

HowTo

9 Quick Fixes to Unfortunately TouchWiz has stopped Of Vivo V30 Pro | Dr.fone