9 Quick Fixes to Unfortunately TouchWiz has stopped Of Xiaomi Redmi Note 12 Pro 4G

“Unfortunately TouchWiz home has stopped” is the talk of the town due to annoying TouchWiz UI, a front-end user interface developed by Xiaomi Redmi Note 12 Pro 4G. Not to mention, the Xiaomi Redmi Note 12 Pro 4G has borne a whole lot of heat from its agitated users over the years and the reason is pretty much obvious due to the pre-installed bloatware apps and the theme launch “TouchWiz home”. That not just brutally annoys users and eats up a heck of internal storage space but lags up too often due to low speed and stability. As a result users end up with “Unfortunately TouchWiz home has stopped” and “Unfortunately, TouchWiz has stopped”. Apparently, there are several flaws in the design and functioning of this launcher and hence, Touchwiz keeps stopping or becomes unresponsive.

Part 1: Common scenarios when TouchWiz keeps stopping

Here in this section, we will introduce some scenarios that can be blamed for why TouchWiz is not working. Check out the following points:

• More often than not, the TouchWiz keeps stopping after an Android update. When we update our Xiaomi Redmi Note 12 Pro 4G device, the old data and cache usually conflicts with TouchWIz thereby cropping up this mess.
• When you disable some built-in apps, you might get in trouble with TouchWiz. Doing this sometimes can hamper the TouchWiz operation and raise the “**unfortunately TouchWiz home has stopped**” error message.
• Many times installing some third-party apps and widgets can cause this problem. The apps like launchers can be conflicting with TouchWiz home launcher and therefore cease it to work. Also, a glitched widget is responsible for the same i.e. forces stop the TouchWiz.

Part 2: 9 Fixes to “Unfortunately TouchWiz has stopped”

Fix “TouchWiz keeps stopping” by repairing Android system

When your TouchWiz keeps stopping and you aren’t able to proceed further, the best way to handle the situation is to repair the Android system. And the best that can help you to serve the purpose is Dr.Fone - System Repair (Android). It has the ability to fix any sort of Android system issue without any complications. To fix this issue, the tool only takes few minutes of yours and performs smoothly. Moreover, you don’t have to worry if you aren’t tech pro. This tool requires no special technical know-how. Here are the advantages you get with this tool.

Dr.Fone - System Repair (Android)

One click tool to fix “Unfortunately TouchWiz has stopped”

• A very easy tool that fixes problems in just one click
• Provides full support all day all night as well as offers 7 day money back challenge
• Enjoys higher success rate and considered as first tool carrying such amazing functionalities
• Able to fix wide variety of Android issues including app crashing, black/white screen of death
• Fully secured and no harm regarding any virus infection

3,211,972 people have downloaded it

Step 1: Download the Program

The one-click repairing process begins with downloading Dr.Fone from its official website. When it is downloaded, follow the installation steps. Upon successful installation, launch the tool on your PC.

Step 2: Connect your Xiaomi Redmi Note 12 Pro 4G Device

After you open the software, hit on the “System Repair” button from the main interface. With the help of a genuine USB cable, get your Xiaomi Redmi Note 12 Pro 4G phone and connect it with the computer.

Step 3: Choose the Tab

Now, from the next screen, you are supposed to choose “Android Repair” tab. It is given on the left panel.

Step 4: Enter Right Information

Please keep your mobile details handy as you will need them in the next window. You will need to enter the correct brand, model, and country name etc. for better detection of your device.

Step 5: Confirm Actions

This process may result in removing your data hence we strongly recommend you to keep a backup of your data.

Tip: You can use Dr.Fone – Phone Backup (Android) to backup your Xiaomi Redmi Note 12 Pro 4G device in case you’re wondering how.

Step 6: Take your Device in Download mode

You will get some instructions on your screen to keep your device in Download mode. Follow them according to the Xiaomi Redmi Note 12 Pro 4G device you own and hit “Next”. When you do this, the program will detect your device and let you download the latest firmware.

Step 7: Repair Device

Now, when the firmware is downloaded, the program will itself begin to repair your device. Wait and keep the Xiaomi Redmi Note 12 Pro 4G device connected until you get the notification for process completion.

Clear the cache data the TouchWiz

Maximum Android devices are designed to deleted cache data upon getting updated to the newest Android system. However, Xiaomi Redmi Note 12 Pro 4G stands as an exception in such case. And therefore, many times TouchWiz starts stopping right after upgrading. Thus, due to the collection of cache data, TouchWiz can display error. This calls for removing the cache from TouchWiz and run things smoothly. Here is how to do this:

• Tap on “Apps” from the Home screen firstly.
• Launch “Settings” afterwards
• Look for “Applications” and tap on it followed by “Application Manager”.
• When Application Manager gets opened, swipe towards right to get into the “All” screen.
• Now, choose “TouchWiz” and tap “Clear Cache”.
• Now, tap “Clear Data” followed by “OK”.
• Now restart your device.

Please note that this will delete all your Home screens post this method.

Disable Motion & gesture settings

The functions regarding Motions and Gestures can be responsible for why TouchWiz home has stopped in your device. Usually the Xiaomi Redmi Note 12 Pro 4G devices running on Android version less than Marshmallow are prone to encountering this issue. Or the Xiaomi Redmi Note 12 Pro 4G devices having modest specs often fall prey to the issue. When you disable these settings, you might get out of the problem.

Change the Animation Scale

When you use TouchWiz, it may consume higher memory usage for high amount of graphic maintenance. As a result, the “**unfortunately TouchWiz home has stopped**” error might crop up. Taking this into consideration, you should try reconfiguring the animation scale and get rid of the error. Here’s how:

Clear Cache Partition

In case the above steps didn’t figure out the problem, here is the next tip. This method can be counted as one of the most effective one. Because it is able to fix minor issues in Android devices, we recommend you for “**TouchWiz home has stopped**” issue too. Let us know how you can do it:

• Turn off your Xiaomi Redmi Note 12 Pro 4G device.
• Start pressing and holding “Volume Up” and “Power” buttons simultaneously.
• Keep doing this until you see the Android screen. This will take your device into recovery mode.
• You will observe some options on the screen. Take help of Volume buttons, scroll down to choose “Wipe Cache Partition”. Press Power button to confirm and the Xiaomi Redmi Note 12 Pro 4G device will be rebooted.

Check now if the error is eliminated. If unfortunately not, please try the following solution.

Enable the easy mode

For some users, enabling Easy Mode has been of great assistance. This feature aims to make the user experience more efficient by simply eliminating complex features. The Easy Mode removes those features that confuse the users by messing up the screen. Hence, we suggest you to switch to this mode in order to remove “**TouchWiz not working**” problem. The steps are:

• Open “Settings” and go to “Personalization”.
• Hit on “Easy Mode” now.

Hope the TouchWiz won’t keep stopping error does not pop up anymore!

Boot your phone to safe mode

Here is the next solution to be followed when TouchWiz keeps stopping. As we already said, third-party apps can cause this issue, booting your device in the Safe mode will disable those apps temporarily. Hence you need to boot your Xiaomi Redmi Note 12 Pro 4G device to Safe mode and check if the reason is any third-party app.

• Switch off your device to initiate.
• Press “Power” button and keep doing this until device’s logo appears on the screen.
• When you see logo appearing, instantly release the button and start holding “Volume Down” button.
• Keep holding until rebooting finishes.
• You will now witness “Safe mode” on the bottom screen. You can now release the button.

Reset Factory settings

If the above method went futile and you’re still at the same place, then factory reset is the next logical step to be taken. We suggest this method because it will take your device to its factory state. As a result, TouchWiz will probably get normal and work perfectly.

Along with this, we would also suggest you go take backup of your data so that you won’t lose any of the personal information from your device after performing factory reset. For your convenience, we have stated the backup steps too in the following guide. Have a look:

• Run “Settings’ in your device and go to “Backup & Reset”.
• Notice if “Back up my data” is enabled or not. If not, turn it on and create backup.
• Now, scroll for “Factory Data reset” option and confirm it by clicking “Reset Phone”.

• Wait a few minutes and your device will reboot.

Install a new launcher to replace TouchWiz

We believe that you will find the above methods helpful. However, if still in case your TouchWiz is not working, we advice you that you should install a new theme launcher in your device. It will be a wise option to ditch TouchWiz in such scenario rather than tolerating the problem. Hope this advice will help you.

Full Solutions to Fix Error Code 920 In Google Play on Xiaomi Redmi Note 12 Pro 4G

If you are using an Android device, you might have encountered the error code 920 in Google Play Store. This error usually occurs when you are trying to download or update an app from the Google Play Store. The error code 920 can be quite frustrating, as it prevents you from downloading or updating your favorite apps. However, there are several ways to fix this error and get your apps back up and running. In this article, we will show you some of the best solutions to fix error code 920 in Google Play Store on Xiaomi Redmi Note 12 Pro 4G.

Trust me, once you face an error it’s frustrating until you find a solution to it. Almost 90 % of the time we search on the internet for an appropriate solution. But finding a legitimate solution can be hard. Most websites just upload only one method to solve an error. And most times that one single method may not be enough for us. And again we are back to Square one trying to figure out what’s wrong and where we screwed up. Most people face an error 920 on play store. It’s frustrating to get the play store error 920.And not everyone knows what the error 920 is. Rest assured, this article will provide you four methods to get rid of the error 920 problems you face and you will not have to depend on any other further sources for finding out what play store error 920 is or find any other method to get rid of the error 920 on play store.

• (i) Re-installing the application
• (ii) Switching off and turning the wifi (cellular data) on
• (iii) Clearing the cache and data of Google Play Store
• (iv) Removing and adding back your Google account

Part 1: What is Error Code 920?

Sometimes people think that they have endangered the fate of humanity because of the error that is being displayed (Just Kidding). Don’t worry you haven’t crashed any server or did any damage to your device but you just gave your device a lot of work. Before you got this error you were downloading a lot of apps right. Well, that’s the exact reason why you came up with this error in the first place. There are various reasons behind this error code 920, however, the prominent ones are –

• a. Too much load on your data connection.
• b. The cache is not cleaned. Thus the connection is getting hampered due to overload.
• c. Network connection is not stable.

There are a lot of Android users out there and the error 920 on play store doesn’t have a unique solution. You’ll have to try out a bunch of them and find out what works for your device. So one of the given four methods below is definitely going to work on your device.

Part 2: 5 Solutions to fix error 920

METHOD 1: Fix Error Code 920 By Android Repair

If you’re writing a lot of data to your device in one go, this can sometimes overload your phone which can cause data corruption. This could have happened if you try the method above and then still encounter the play store error 920.

If this is the case, there’s a solution known as Dr.Fone - System Repair that can help. This is an industry-leading package that has everything you need to get your device running as it should be.

Dr.Fone - System Repair (Android)

Easiest Fix to Error Code 920

• Easy operation with no technical knowledge required
• Simple, one-click play store error 920 fix
• Clean and simple to understand user-interface
• Supports various Xiaomi Redmi Note 12 Pro 4G devices, including the latest Xiaomi Redmi Note 12 Pro 4G S9/S8
• The #1 Android repair software in the world

3,545,081 people have downloaded it

If this is the answer you’re looking for to help you fix your error code 920 problems, here’s a step by step guide on how to use it;

Note: please note that this method may erase all personal data on your device, so make sure you’ve backed up your device before continuing.

Step #1 Head over to the Dr.Fone website and download the Repair software for your Windows computer.

Step #2 Once installed, open the software and select the ‘System Repair’ option from the main menu.

Then connect your Xiaomi Redmi Note 12 Pro 4G using the official cable and select the ‘Android Repair’ option.

Step #3 On the next screen, insert your device information to ensure you’re downloading the correct firmware.

Step #4 Put your phone into Download mode by following the onscreen instructions.

Dr.Fone will now download your firmware and automatically install it onto your device. Your phone will then reset, and you’ll be ready to use it without experiencing that annoying error 920 play store code!

METHOD 2: Re-installing the application

This is the first thing that you want to try before going on to the more advanced one. In fact, this is the first thing I’d recommend you to try if you come up with an Error code 920. Just try this whenever you get any error.

Step 1 - Go to the application that you got the error with.

Step 2 - Open that application download page on the Play store.

Step 3 - Uninstall it or even uninstall all the update (If the error came when you were updating the application).

Step 4 - Now you clear the task manager and try installing it once again. If the play store error 920 doesn’t come then you have solved the problem and now wasn’t that easy. So it’s always best to try this step before doing anything else.

METHOD 3: Switching off and turning the wifi (cellular data) on

This is another basic method in solving the play store error 920. This error comes in when you have given too many tasks to download.

Step 1 - To remove that load Just turn your wifi off and then turn your wifi on (the same goes with your cellular data).

Step 2 - Now after doing this go to your Play Store application and download the application that you were going to download. Now your Play Store Error 920 won’t be bothering you anymore.

METHOD 4: Clearing the cache and data of Google Play Store

This is a little more complicated (complicated as in you will need to do a little more than the previous two methods). What you need to do is clear the cache and clear the data of the play store. This will get rid of the error code 920 the next time you download or update any application from the Google Play store.

Step 1 – Go to settings of your device.

Step 2 – Now find “Applications” option under the settings menu. Here you can find “Google Play Store” option. Open it.

Step 3 – Now, at the bottom, you can find “Clear Cache” option. Tap on it and your all cache will be cleared.

After doing this step clear your task manager (delete all recent applications). Go to play store and resume your download or update.

METHOD 5: Removing and adding back your Google account

It is best if you follow the order of the methods mentioned. Like, try each method in the given order until you get rid of the play store error 920. If you reach here then you truly must be in a desperate position to get rid of this error. The best and guaranteed way is to delete your Google account from your phone. By deleting what is meant here is to temporarily remove your account and the adding it in again. What this does is it kind of resets your play store details and it eradicates the error code 920. To do this you need to

Step 1 - go to Settings of your Mobile.

Step 2- Now, find “Accounts” and then go to “Google Accounts”.

Step 3 - In that section find the account you use for the play store or the account that you were using while the error came in. Once you tap on your specific account you’ll find an option to remove the account. Tap on it.

Step 4 - Now you have successfully removed your account and after that re-add your account. After entering your email id and password and hence adding your account. Go back to the play store and find the application that you were downloading or updating when the error code 920 came in. Now re-install it or update it back again. This time you won’t be faced with the play store error 920.

Again it is best if you follow the methods as illustrated above for removing error code 920 and this might have solved your problem by now. If now, you go for a complete factory reset, do it only at the extreme stage as this will delete all your personal data.

Play Store error 920 is a pretty common error and its solutions are also very easy. Please do ensure that you follow each and every step in sync so that you can get the best result out of these methods and get over with the error code 920 on Google play store.

App Won’t Open on Your Xiaomi Redmi Note 12 Pro 4G? Here Are All Fixes

It is not a very rare phenomenon where an App won’t open, crash abruptly or face trouble while launching on an Android device. Many Android phone users also add to the fact that whenever they try to launch an App, it keeps loading but does not run smoothly, as it should in normal circumstances.

In such a scenario it is obvious for Android Smartphone users to look for possible solutions for such a random error so that their App/Apps load and work normally.

Many people are also interested in knowing about the causes behind why an App won’t open or why multiple/all Apps won’t open. This article will answer your query about why won’t my App open on an Android phone by listing a few probable causes for the problem.

Here are all the fixes you need if an App won’t open on your Xiaomi Redmi Note 12 Pro 4G. Read on to find out all about why Apps won’t open on your Xiaomi Redmi Note 12 Pro 4G and solutions to overcome such a problem.

Part 1: Possible reasons for Apps won’t open

If you are an Android phone user and face a problem while trying to open an App on your device, you will ask yourself “Why won’t my App open?”. To answer your question and explain to you why an App won’t open on your phone, here are some probable and simple reasons to make you understand the real problem.

It is appropriate to tag our generation as smartphone addicts because we use smartphones for anything and everything. All our important information, such as photos, videos, audio files, documents, notes, calendars, emails, etc, are stored on our phones. This causes a major storage/space problem in our phones and a shortage of storage space is one of the main reasons why an App won’t open or why all Apps won’t open on your Xiaomi Redmi Note 12 Pro 4G. To see how much of your storage space is occupied by Apps, go to “Settings” and select “Application Manager”.

Another possible reason for Apps to crash or why an App won’t open is a possible data crash. This may occur due to an unstable internet connection or various other background software interruptions.

The causes for the problem to occur are many and no specific reason can be established as the only reason why Apps won’t open on your Xiaomi Redmi Note 12 Pro 4G. There are a lot of speculations about why such a problem occurs and persists, but it is more important to focus on how to fix if a particular App won’t open or if all Apps won’t open on Android.

Part 2: Quickest solution to fix apps won’t open on Android

You have already understood ‘why won’t your app open?’ at the start of this article. But, you are not happy with the traditional solutions to fix the app won’t open issue.

Well, in such a case Dr.Fone - System Repair (Android) can prove to be your savior. It resolves failed Android system update issues, crashing apps, and black screen of death. It can also get an unresponsive or bricked Android device or boot loop stuck device fixed with one click.

Dr.Fone - System Repair (Android)

Why won’t my app open? The quick fix is here!

• This is the first software in the industry that repairs Android systems.
• All the latest Xiaomi Redmi Note 12 Pro 4G tablets and mobiles are compatible with it.
• With single-click operation, fixing the app won’t open problems is super easy.
• No technical skills are needed to use the tool.
• The high success rate for Xiaomi Redmi Note 12 Pro 4G Android device issue fixing.

3981454 people have downloaded it

Here comes the detailed guide to fix apps won’t open problem using Dr.Fone - System Repair (Android)

Note: When you are up to fixing apps won’t open issues, make sure to back up your Xiaomi Redmi Note 12 Pro 4G beforehand. These processes might lead to data erasing and you don’t want to suffer data loss this way.

Phase 1: Preparation and connection of Android device

Step 1: Post-installation and launch of Dr.Fone on your computer, you got to press the ‘System Repair’ tab. Connect the Android device later.

Step 2: Hit the ‘Android Repair’ located on the left panel followed by tapping the ‘Start’ button.

Step 3: Feed your Xiaomi Redmi Note 12 Pro 4G details under the Xiaomi Redmi Note 12 Pro 4G device information screen. Please check the warning and press the ‘Next’ button right after that.

Phase 2: Repairing your Xiaomi Redmi Note 12 Pro 4G under ‘Download’ mode

Step 1: You got to boot the Android device under Download mode, as it’s important. The steps for that are as follows –

• Android devise with a ‘Home’ button – Press together ‘Volume Down’, ‘Home’, and ‘Power’ buttons together for 5 to 10 seconds after turning off the Xiaomi Redmi Note 12 Pro 4G device. Release them afterward and click the ‘Volume Up’ button to get into the ‘Download’ mode.

• When there is no ‘Home’ button – Turn off the Xiaomi Redmi Note 12 Pro 4G device and then for 5 to 10 seconds, keep the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons pressed. Tap the ‘Volume Up’ button after releasing all the buttons to enter the ‘Download’ mode.

Step 2: Hitting the ‘Next’ button starts downloading the Android firmware.

Step 3: Once Dr.Fone - System Repair (Android) verifies the downloaded firmware, it begins fixing the app won’t open the issue asap.

Part 3: 3 Common fixes if a particular App won’t open

In this segment, we will discuss the three best ways to help you fix the problem if only a particular App won’t open/launch/ run and takes an indefinite time to load.

1. Update the App

It is always advisable to keep your Android software as well as your Apps up-to-date and you must constantly check for any updates which may be available in the Google Play Store.

Follow the steps given below to update the app which won’t open on your phone:

• Visit Google Play Store on your Xiaomi Redmi Note 12 Pro 4G.

• Now select “My Apps & Games” from the main menu.

• In this step, you may click on “Update All” to update all Apps for which an update is available or manually select the Apps which you wish to Update.

Once the App is updated, close all Apps and tabs running in the background. Now try to launch the app once again. If it opens, your problem is solved. If not, DO NOT worry as there are more ways to help you.

2. Force Stop the App

Closing the App completely which won’t open on your phone is a good idea. To make sure that no operations are running in the background related to the App, you must “Force Stop” it. Doing this is extremely simple and all you need to do is follow the steps given herein under:

• Visit “Settings” on your phone.

• Click on “Apps” to see a list of all the Apps on your Xiaomi Redmi Note 12 Pro 4G.

• Select the App which won’t open.

• Now click on “Force Stop” as shown below.

3. Clear App Cache and Data

This method resolves the issue to a great extent by wiping off unnecessary App content from your device.

Carefully follow the step-by-step instructions given below to clear all App cache and data:

• Visit “Settings” and select “Apps”.

• From the list of Apps that appears, select the App that won’t open.

• Now tap on “Clear Cache” and “Clear data” directly or under “Storage”.

Part 4: 3 Common fix if all Apps won’t open on Android

In this segment, we will discuss solutions to the problem if all your Apps won’t open. They are simple and easy to follow and solve the error in no time.

1. Android updates

Firstly, it is very important to keep your Android software updated at all times as an old Android version might not support new Apps or updated Apps.

To update your software:

• Visit “Settings” and keep going downwards.

• Now select “About Phone”.

• From the options available on the screen, tap on “System Updates”

• In this step, if you are prompted for an update, follow the instruction given and do so.

Updating your Android software solves most of your problems. This method might sound weird but works wonders when it comes to App related issues.

2. Restart the phone

Restarting your Xiaomi Redmi Note 12 Pro 4G to fix an error might sound old school but it gives good results when your Apps won’t open. Restarting your phone is fairly simple. All you need to do is:

• Long press the power button.

• Now click on “Restart”.

Your phone will automatically restart and once it does, you can try to launch the App. You may also restart your Xiaomi Redmi Note 12 Pro 4G by pressing the power button for about 15-20 seconds.

3. Reset Factory Settings

This method is a little tedious and must be last on your list. Also, make sure you take a backup of all your data and contents stored on your Xiaomi Redmi Note 12 Pro 4G and this solution will completely wipe off your phone making as good as a new smartphone.

To Factory Reset your Xiaomi Redmi Note 12 Pro 4G, carefully follow the guidelines given below:

• Visit “Settings” to find the “Backup and reset” option as shown in the screenshot below.

• Now click on “Factory Data Reset”>“Reset Device”>“Erase Everything”

Your phone will now reboot and will be required to set up from scratch.

“Why Won’t my App open” is a question asked by many Android phone users who fear that the problem occurs due to a virus attack or a system failure. However, this is not the case. The reason for the error to the surface is quite minor and can be fixed by you, sitting at home, without resorting to any kind of technical or external assistance. The solutions listed above are easy to understand and not very time-consuming.

So go ahead and try them out now!

Also read: