Android Safe Mode - How to Turn off Safe Mode on Itel P40?

Safe mode on Android is very useful to get rid of dangerous apps and malware. This allows the user to perform a uninstall of the crashed or malicious apps by putting safe mode on Android. Now the question is how to remove safe mode? In this article, we have discussed in detail how to get out of safe mode and also discussed some frequently asked questions. Keep reading this article.

Part 1: How to turn off safe mode on Android?

This is very important to turn off the safe mode after you put the safe mode on Android. Your mobile performance is limited in this mode. So you have to turn off safe mode. For doing this, there are some methods. Try to apply them one by one. If you succeed, stop there. Else go to the next method.

Method 1: Restarting the Itel P40 device

This is the easiest method to turn off the safe mode in Android. To use this method, follow the steps below.

Step 1 – Tap and hold the power button of your Itel P40.

Step 2 – You could find the option “Restart”. Tap on it. (If you have only one option, move to the step no 2)

Step 3 – Now, your phone will boot up in some time and you can see the Itel P40 device is no more on safe mode.

This method, if goes well, will turn off safe mode in Android from your device. IF not, move to the next method instead.

Method 2: Do a soft reset:

The soft reset is very easy to perform. It won’t delete any of your personal files etc. Besides, it clears all the temp files and unnecessary data and recent apps so that you get a healthy device. This method is very good for turning off Safe mode on Android.

Step 1 – Tap and hold the power button.

Step 2 – Now, select “Power off” from the given option. This will make your device off.

Step 3 – Wait a few seconds and then turn it on again.

This time you can see your phone is no more in safe mode. Also, your junk files have been also removed. If you still find the Itel P40 device is the safe mode, follow the next method.

Method 3: Break all power

This method is sometimes very helpful to turn off safe mode on android by disconnecting all the power as well as resetting the SIM card.

Step 1 – Take the back cover off from the Itel P40 device and remove the battery. (Not all devices will give you this facility)

Step 2 – Take out the SIM card.

Step 3 – Reinsert the SIM card and insert the battery again.

Step 4 – Turn the Itel P40 device on by tapping and holding the power button.

Now, you can see your device is out of safe mode. If you still find your device in Safe mode, see the next method.

Method 4: Wipe the cache of the Itel P40 device.

The cache of the Itel P40 device sometimes creates an obstacle in overcoming the safe mode on Android. To solve this issue, follow the steps below.

Step 1 – Turn on your device in safe mode. It can generally be done by tapping the home, power, and volume up button on Android device. If this combination is not working for you, search the internet with your device model number.

Step 2 – Now you can find the recovery mode screen. Navigate to the “Wipe cache” option with the volume up and down button and select the option by tapping the power button.

Click here


Step 3 – Now follow on-screen instruction and your device will be rebooted.

After successful completion of this method, your device should no longer be in safe mode. If the problem still persists, the only solution is to do a factory reset. This will erase all the data from your device. So take backup of your internal storage.

Method 5: Factory data reset

To factory data reset, you have to follow the below steps.

Step 1 – Enter in the recovery mode by following the steps mentioned earlier.

Step 2 – Now select “Factory data reset” from the given options.

Step 3 – Now, follow the on-screen instructions and your device will be factory reset.

After this method, you can successfully get rid of the safe mode on Android. Restore your data from the backup you created.

Watch the video below to turn off safe mode on your phone:

Part 2: How to put the phone in safe mode?

If some apps or programs create a problem on your device, the solution is safe mode. Safe mode allows you to uninstall the app or the program out of your device safely. So, safe mode on Android is quite useful sometimes. Let’s have a look at how to turn on safe mode in Android.

Before this, remember to take a backup of your Itel P40. We recommend you to use the Dr.Fone - Phone Backup (Android). This tool is the best in its class to provide users with a very easy-to-use user interface yet powerful solution.

Dr.Fone - Phone Backup (Android)_

Flexibly Backup and Restore Android Data

• Selectively backup Android data to the computer with one click.
• Preview and restore the backup to any Android devices.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restore.

Always remember to use this tool before you enter in the safe mode as you never know what will happen next and you might end up with factory resetting. This, as the result, will erase all your valuable data. So always perform backup data before you proceed.

To enter the safe mode, follow the instructions below.

Step  1 – First of all, long press the power button and let the Power options appear.

Step 2 – Now, long press on the “Power off” option. This will instantly ask you if you want to reboot into safe mode. Select the option and your device will reboot in safe mode.

If you are using Android version 4.2 or earlier, turn off the Itel P40 device and turn it on the back by tapping the power button. When the logo appears, tap and hold the volume down button. This will allow the Itel P40 device to boot in safe mode.

Follow these steps carefully and now you can see a “Safe Mode” written at the corner of your device. This will confirm that you have successfully entered in Safe mode on Android.

Part 3: Safe mode on Android FAQs

In this section, we’ll discuss some frequently asked questions about the safe mode. Some users have many questions regarding the safe mode. Here we’ll try to cover some of them.

1. Why is My Itel P40 on safe mode?

This is a very common question around the world. For many Android device users, it’s quite common to see your phone in safe mode suddenly. Android is a secure platform and if your device sees any threat from your recently installed apps or any programs that want to harm your device; it would go into safe mode automatically. Sometimes, you might accidentally perform the steps discussed in part 2 and boot your device in safe mode.

2. Safe mode won’t turn off on My Itel P40

For the solution to remove safe mode from your device you must follow the step-by-step methods as mentioned in part 1. This will surely take your device out of the safe mode.

The safe mode is a very useful program for any Android device. But it limits the programs of Android and you must remove safe mode after uninstalling the harmful app. This article showed you how to turn off safe mode easily.

Try It Free Try It Free

Stuck at Android System Recovery Of Itel P40 ? Fix It Easily

In this article, you will learn what is Android system recovery, and how to fix Android stuck at system recovery step by step. To get out of Android system recovery more easily, you need this Android repair tool.

You know your Itel P40 is stuck in recovery mode when you cannot turn on the Itel P40 device. If you try to turn it on, it shows a message that says, “Android System Recover.” This situation can be quite debilitating for most Android users. Most of the time, you don’t know whether you have lost all of your important Android data. It is even more worrying because of the fact that you cannot turn on your device at all, especially when you don’t know how to fix it.

Part 1. What is Android System Recovery?

Despite all the worry that surrounds an unwanted Android system recovery screen, it is actually a feature that can be quite helpful to your Itel P40 when it’s needed. It can be useful when you want to hard reset the Android device without having to access the settings. This can be very useful if your device is not working very well or if your touch screen is experiencing problems. It can also be very helpful when you are having a problem accessing the settings on your device.

For these reasons, it is actually a good thing, although when it does happen unexpectedly, you may want to know how to fix it.

Part 2. How to get to Android System recovery

Now that you know how useful the Android System can be, you may want to know how to utilize this feature to get out of some of the problems we mentioned above. Here’s how you can safely get to the Android recovery system on your Itel P40.

Step 1: Hold down the power key and then select “Power Off” from the options on the screen. If, however, your screen is unresponsive, keep holding the power key for several seconds until the Itel P40 device is completely turned off.

OtsAV DJ Pro

Step 2: Next, you need to hold down the Power and the Volume Key. You should able to see the Android image and a bunch of information about your device. There should also be a “Start” at the top right corner of the screen.

Step 3: Press the Volume up and Volume down keys and use the Power key to select menu options. Press the Volume down key twice to see “Recovery Mode” in red at the top of the screen. Press the Power key to select it.

WinUtilities Pro

Step 4: The white Google logo will appear immediately followed by the Android logo again as well as the words “No Command” at the bottom of the screen.

Step 5: Finally, press and hold both the Power and the Volume up Key for around 3 seconds and then let go of the Volume up Key but keep holding the Power Key. You should see the Android system recovery options at the top of the screen. Use the Volume keys to highlight and the Power key to select the one you want.

Part 3. Android Stuck at System Recovery? How to fix in one click?

Sometimes during the System Recovery process, the process can glitch, and you’ll lose data on your device, rendering it unusable. However, another solution to fix this is to repair your device using the Dr.Fone - System Repair tool.

Dr.Fone - System Repair (Android)

One-stop solution to fix Android stuck at System recovery

• It’s the #1 software for PC-based Android repair
• It’s easy to use with no technical experience required
• Supports all latest Itel P40 devices
• Easy, one-click fix Android stuck at system recovery

3981454 people have downloaded it

Here’s a step by step guide on how to use it yourself;

Note: Be aware that this process can erase all your personal files on your device, so ensure you’ve backed up your Itel P40 before continuing.

Step #1 Head over to the Dr.Fone website and download the software for your Windows computer.

Once installed on your computer, open onto the main menu and connect your Itel P40 using the official USB cable. Select the System Repair option.

Step #2 Select the ‘Android Repair’ option from the next screen.

Insert your device information, including the brand, carrier details, model and country and region you’re in to ensure you’re downloading the correct firmware.

Step #3 Follow the onscreen instructions on how to put your device in Download Mode.

Your device should already be in this mode but follow the instructions to make sure. There are methods available for devices, both with and without home buttons.

Step #4 The firmware will now start downloading. You’ll be able to track this process in the window.

Ensure your device, and your computer stays connected the entire time, and make sure your internet connection remains stable.

After downloading, the software will automatically start to repair your device by installing the firmware. Again, you can track the progress of this on the screen, and you’ll need to ensure your device remains connected throughout.

You’ll be notified when the operation is complete and when you’re able to disconnect your phone and use it as normal, free from it being stuck on the Android system recovery screen!

SwifDoo PDF Perpetual (1 PC) Free upgrade. No monthly fees ever.

Part 4. Android Stuck at System Recovery? How to fix in a common way?

If, however, your device is stuck on system recovery mode, here’s how you can easily get it out of system recovery. The process is slightly different for different Android devices, so you should check your device’s manual before attempting this process.

Step 1: Power off the Itel P40 device, and just to be sure, take out the battery to ensure that the Itel P40 device is fully turned off. Then reinsert the battery.

Step 2: Press and hold down the Home button, Power Button, and the Volume up Key simultaneously until the Itel P40 device vibrates.

Step 3: Once you feel the vibration, release the power button but continue to hold down the Home and Volume up Key. The Android recovery screen will display. Release the Volume up and Home buttons.

Step 4: Press the Volume down key to select the “Wipe Data/ Factory Reset option and then press the Power button to select it.

Step 5: Next, you need to press the Volume down button to highlight “Delete All User Data” and then press the Power button to select it. The device will reset and present the “Reboot System Now” option.

Step 6: Finally, press the Power button to reboot the phone in normal mode.

Part 5. Backup and Restore Android System

Losing data on your Itel P40 is a common occurrence, and since Android devices don’t really have an automatic full backup solution, it is important to know how to backup and restore your device system. Here’s how to easily do that.

Step 1: Enter the recovery mode on your Itel P40, as described in Part 2 above. Use the Volume and Power keys to select the “Backup & Restore” option on the screen.

Step 2: Tap on the backup option or use the Volume and Power keys if your screen is unresponsive. This will begin backing up your system to the SD card.

Step 3: After the process is complete, choose “Reboot” to restart the Itel P40 device.

Step 4: You can then simply check Recovery > backup directory on your SD card. You can rename it to easily find it later during the restore process.

To restore the system from the backup created, follow these simple steps.

Step 1: Once again, enter recovery mode as described in part 2 above and then choose Backup & Restore from the menu list.

Step 2: Press “Restore” to begin the recovery process from the Backup file we created

Step 3: You will be notified when the system restore is complete.

Android system recovery mode can be quite useful, especially when your system is unresponsive. As we have also seen, it is important to know how to get into and out of System Recovery mode if you are going to backup and restore your Android system. It is also quite easy to do both of these things.

Simple Solutions to Fix Android SystemUI Has Stopped Error For Itel P40

In this article, you will learn possible causes of Android SystemUI stopping error and 4 methods to fix this issue. Get Dr.Fone - System Repair (Android) to fix Android SystemUI stopping more easily.

Android SystemUI isn’t responding or Android, unfortunately, the process com.android.systemui has stopped is a not a rare error and is observed in all Android devices these days. The error usually pops up on your device while you are using it with a message on the screen saying Android. Unfortunately, the process com.android.systemui has stopped.

The Android SystemUI isn’t responding error message may also read as “Unfortunately, SystemUI has stopped”.

Android SystemUI error can be very confusing as it leaves affected users with only one option, i.e., “OK”, as shown in the images above. If you click on “OK” you will continue to use your device smoothly, but only until the SystemUI isn’t responding error pops-up on your main screen again. You may restart your device, but the Android SystemUI has stopped the problem continues to annoy you until you find a permanent solution for it.

If you are also among the various users who see Android, unfortunately, the process com.android.systemui has stopped error, then do not worry. SystemUI isn’t responding. Error is not a serious issue and can be tackled easily by carefully examining the reasons behind the problem.

Looking for suitable solutions to fix Android SystemUI has stopped error? Then read on to find out all about Android SystemUI isn’t responding error and the most effective ways to fix it.

Part 1: Why Android SystemUI Has stopped happens?

Android device owners would agree that OS updates are very helpful as they fix the bug problem and improve the overall working of your device. However, sometimes these updates may be infected due to which they do not download and install properly. A corrupted OS update may cause Android; unfortunately, the process com.android.systemui has stopped error. All Android updates are directly designed around the Google App, and thus, the problem will persist until the Google App is also updated. Sometimes, even the Google App update may cause such a glitch if it is not successfully downloaded and installed.

Another reason for the Android SystemUI isn’t responding error to occur, maybe because of flashing a new ROM or due to improper firmware update installation. Even when you restore the backed up data from cloud or your Google Account, such Android, unfortunately, the process com.android.systemui has stopped error may show up.

It is not possible to say for sure which one of the above-mentioned reasons is causing your device to show Android SystemUI is not responding error. But what we can do is move on to fixing the Android SystemUI by following any one of the three methods given the following segments.

Part 2: How to fix “com.android.systemui has stopped” in one click

As we’ve learned that Android system UI isn’t responding issue is primarily because of the Android OS updates not installed properly or were corrupted. Hence, there comes the need for a powerful Android system repair tool that can help you rectify such annoying errors.

To serve the purpose, we would like to introduce, Dr.Fone - System Repair (Android) . It is one of its kind of applications and is highly recommended as it has a proven success rate to resolve almost all Android system issues.

It’s now time to understand how to fix Android ‘unfortunately, the process com.android.systemui has stopped’ or in simple words, Android system UI isn’t responding.

Note: Before we proceed to Android repair, please ensure to make a backup of all your data . This is because the Android repair process may wipe out all the data on your device to fix the Android OS issues.

Phase 1: Connect and prepare your Itel P40

Step 1 – Download the Dr.Fone toolkit over your PC. Install it and launch it over. Opt for the “System Repair” tab from the main screen and get your Itel P40 connected to the PC.

Step 2 – You need to select “Android Repair” from the left panel and then hit the ‘Start’ button.

EmEditor Professional (Lifetime License, non-store app)

Step 3 – Next, you need to select the correct information about your device (i.e., brand, name, model, country/region, and carrier details). Check the warning down below and hit “Next”.

Phase 2: Boot Android in ‘Download’ mode to perform the repair.

Step 1 –You’re now required to boot your Android in Download mode. Here’s what you need to do to put your Android in DFU mode.

If your Android has a Home button:

• Turn off your device. Hold down “Volume Down + Home + Power” buttons altogether for about 10seconds. Let go of the buttons afterward and hit the Volume Up to boot in download mode.

In case your Android has no Home button:

• Turn off your device. Hold down “Volume Down + Bixby + Power” buttons altogether for about 10seconds. Let go of the buttons afterward and hit the Volume Up to boot in download mode.

Step 2 – Once done, hit “Next” to initiate the downloading of the firmware.

Step 3 – As soon as the download completes, the Android repair will automatically be started by the program.

Step 4 – In a just a matter of a few minutes, your Android system UI isn’t responding issue will be resolved.

Part 3: Uninstall Google updates to fix Android SystemUI issue

All Android SystemUI isn’t responding errors are circled the Google App as the Android platform is heavily dependent on it. If you have recently updated your Google App and the Android, unfortunately, the process com.android.systemui has stopped error keeps popping up at regular intervals, make sure you uninstall Google App updates as soon as possible.

Follow the steps given below to fix the Android SystemUI has stopped issue by rolling back the Google App updates:

• Visit “Settings” and select “Apps” or “Application Manager”.
• Now swipe to view “All” Apps.
• From the list of Apps, select “Google App”.
• Finally, tap on “Uninstall Updates” as shown hereunder.

Note: To prevent the Android SystemUI isn’t responding error to occur in the future, do not forget to change your Google Play Store settings to “Do Not Auto-Update Apps”.

Jet Profiler for MySQL, Enterprise Version： Jet Profiler for MySQL is real-time query performance and diagnostics tool for the MySQL database server. Its detailed query information, graphical interface and ease of use makes this a great tool for finding performance bottlenecks in your MySQL databases.

Click here

## Part 4: Wipe Cache partition to fix Android SystemUI error

Android, unfortunately, the process com.android.systemui has stopped error can also be fixed by clearing your cache partitions. These partitions are nothing but storage locations for your modem, kernels, system files, drivers, and built-in Apps data.

It is advisable to clear Cache portions regularly to keep your UI clean and free of glitches.

Android SystemUI isn’t responding error can be overcome by clearing the cache in recovery mode.

Different Android devices have different ways to put it in recovery mode. Refer to your device’s manual to enter the recovery mode screen on your device and then follow the steps given below to fix Android; unfortunately, the process com.android.systemui has stopped error by clearing the cache partition:

• Once you are the recovery mode screen, you will see several options as shown in the screenshot.

• Use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

• After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you de-clutter your device and erase all the clogged up unwanted files. You may lose App related data too, but that is a small price to pay to fix the Android SystemUI isn’t responding error.

If the Android SystemUI has stopped the problem persists, there is only one way out. Read on to find out about it.

Part 5: Fix Android SystemUI error by factory reset

Factory Resetting your device to fix Android; unfortunately, the process com.android.systemui has stopped error is a desperate measure and should be the last thing to do on your list. Take this step only when the above mentored two techniques fail to work.

Also, make sure you take a back-up of all your data and contents stored in your Itel P40 on the cloud, Google Account or an external memory device because once you perform a factory reset on your device, all media, contents, data and other files are wiped out, including your device settings.

Follow the steps given below to factory reset your device to solve the Android SystemUI isn’t responding problem:

• Visit “Settings” by clicking the settings icon as shown below.

• Now select “Backup and Reset”.

• In this step, select “Factory data reset” and then “Reset Device”.
• Finally, tap on “ERASE EVERYTHING” as shown below to Factory Reset your device.

After the factory reset process is completed, your device will automatically restart, and you will have to set it up once again.

The whole process of factory resetting your Itel P40 might sound tedious, risky, and cumbersome, but it helps to fix the Android SystemUI has stopped error 9 out of 10 times. So, think carefully before using this remedy.

Android SystemUI isn’t responding or Android, unfortunately, the process com.android.systemui has stopped error is commonly seen by users on their devices. It is not a random error and is linked to either the software, Google App, cache partition, or data stored in the Itel P40 device. It is fairly simple to deal with this issue as all you need to do is install or roll back your Android OS update, uninstall Google App updates, clear cache partition, or factory reset your device to clear all data, files, and settings stored in it. The methods listed and explained above are the best ways to fight the problem and to prevent it from troubling you in the future. These methods have been adopted by affected users all over the world who recommend them because they are safe and involve minimum risks as compared to other tools to solve the Android SystemUI has stopped error. So go ahead and try them now!