Android Safe Mode - How to Turn off Safe Mode on Lava Blaze Curve 5G?

Safe mode on Android is very useful to get rid of dangerous apps and malware. This allows the user to perform a uninstall of the crashed or malicious apps by putting safe mode on Android. Now the question is how to remove safe mode? In this article, we have discussed in detail how to get out of safe mode and also discussed some frequently asked questions. Keep reading this article.

Part 1: How to turn off safe mode on Android?

This is very important to turn off the safe mode after you put the safe mode on Android. Your mobile performance is limited in this mode. So you have to turn off safe mode. For doing this, there are some methods. Try to apply them one by one. If you succeed, stop there. Else go to the next method.

Method 1: Restarting the Lava Blaze Curve 5G device

This is the easiest method to turn off the safe mode in Android. To use this method, follow the steps below.

Step 1 – Tap and hold the power button of your Lava Blaze Curve 5G.

Step 2 – You could find the option “Restart”. Tap on it. (If you have only one option, move to the step no 2)

Step 3 – Now, your phone will boot up in some time and you can see the Lava Blaze Curve 5G device is no more on safe mode.

This method, if goes well, will turn off safe mode in Android from your device. IF not, move to the next method instead.

Method 2: Do a soft reset:

The soft reset is very easy to perform. It won’t delete any of your personal files etc. Besides, it clears all the temp files and unnecessary data and recent apps so that you get a healthy device. This method is very good for turning off Safe mode on Android.

Step 1 – Tap and hold the power button.

Step 2 – Now, select “Power off” from the given option. This will make your device off.

Step 3 – Wait a few seconds and then turn it on again.

This time you can see your phone is no more in safe mode. Also, your junk files have been also removed. If you still find the Lava Blaze Curve 5G device is the safe mode, follow the next method.

Method 3: Break all power

This method is sometimes very helpful to turn off safe mode on android by disconnecting all the power as well as resetting the SIM card.

Step 1 – Take the back cover off from the Lava Blaze Curve 5G device and remove the battery. (Not all devices will give you this facility)

Step 2 – Take out the SIM card.

Step 3 – Reinsert the SIM card and insert the battery again.

Step 4 – Turn the Lava Blaze Curve 5G device on by tapping and holding the power button.

Now, you can see your device is out of safe mode. If you still find your device in Safe mode, see the next method.

Method 4: Wipe the cache of the Lava Blaze Curve 5G device.

The cache of the Lava Blaze Curve 5G device sometimes creates an obstacle in overcoming the safe mode on Android. To solve this issue, follow the steps below.

Step 1 – Turn on your device in safe mode. It can generally be done by tapping the home, power, and volume up button on Android device. If this combination is not working for you, search the internet with your device model number.

Step 2 – Now you can find the recovery mode screen. Navigate to the “Wipe cache” option with the volume up and down button and select the option by tapping the power button.

Step 3 – Now follow on-screen instruction and your device will be rebooted.

After successful completion of this method, your device should no longer be in safe mode. If the problem still persists, the only solution is to do a factory reset. This will erase all the data from your device. So take backup of your internal storage.

Method 5: Factory data reset

To factory data reset, you have to follow the below steps.

Step 1 – Enter in the recovery mode by following the steps mentioned earlier.

Step 2 – Now select “Factory data reset” from the given options.

Step 3 – Now, follow the on-screen instructions and your device will be factory reset.

After this method, you can successfully get rid of the safe mode on Android. Restore your data from the backup you created.

Watch the video below to turn off safe mode on your phone:

Part 2: How to put the phone in safe mode?

If some apps or programs create a problem on your device, the solution is safe mode. Safe mode allows you to uninstall the app or the program out of your device safely. So, safe mode on Android is quite useful sometimes. Let’s have a look at how to turn on safe mode in Android.

Before this, remember to take a backup of your Lava Blaze Curve 5G. We recommend you to use the Dr.Fone - Phone Backup (Android). This tool is the best in its class to provide users with a very easy-to-use user interface yet powerful solution.

Dr.Fone - Phone Backup (Android)_

Flexibly Backup and Restore Android Data

• Selectively backup Android data to the computer with one click.
• Preview and restore the backup to any Android devices.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restore.

Always remember to use this tool before you enter in the safe mode as you never know what will happen next and you might end up with factory resetting. This, as the result, will erase all your valuable data. So always perform backup data before you proceed.

To enter the safe mode, follow the instructions below.

Step  1 – First of all, long press the power button and let the Power options appear.

Step 2 – Now, long press on the “Power off” option. This will instantly ask you if you want to reboot into safe mode. Select the option and your device will reboot in safe mode.

If you are using Android version 4.2 or earlier, turn off the Lava Blaze Curve 5G device and turn it on the back by tapping the power button. When the logo appears, tap and hold the volume down button. This will allow the Lava Blaze Curve 5G device to boot in safe mode.

Follow these steps carefully and now you can see a “Safe Mode” written at the corner of your device. This will confirm that you have successfully entered in Safe mode on Android.

Part 3: Safe mode on Android FAQs

In this section, we’ll discuss some frequently asked questions about the safe mode. Some users have many questions regarding the safe mode. Here we’ll try to cover some of them.

1. Why is My Lava Blaze Curve 5G on safe mode?

This is a very common question around the world. For many Android device users, it’s quite common to see your phone in safe mode suddenly. Android is a secure platform and if your device sees any threat from your recently installed apps or any programs that want to harm your device; it would go into safe mode automatically. Sometimes, you might accidentally perform the steps discussed in part 2 and boot your device in safe mode.

2. Safe mode won’t turn off on My Lava Blaze Curve 5G

For the solution to remove safe mode from your device you must follow the step-by-step methods as mentioned in part 1. This will surely take your device out of the safe mode.

The safe mode is a very useful program for any Android device. But it limits the programs of Android and you must remove safe mode after uninstalling the harmful app. This article showed you how to turn off safe mode easily.

Try It Free Try It Free

Top 4 Android System Repair Software for Lava Blaze Curve 5G Bricked Devices

Is your Lava Blaze Curve 5G device showing signs of being “bricked” or “soft-bricked”? When a Lava Blaze Curve 5G is bricked, it becomes unresponsive and unusable. But fear not, as this article will guide you through reviving your device’s functionality. It will delve into the significance of unbricking and how it restores usability.

Moreover, this article will introduce you to the world of Lava Blaze Curve 5G unbrick tools and software, ensuring you can get your device back on track. So read on and explore the top Android system repair software that can bring life back to your bricked Lava Blaze Curve 5G device.

Part 1: Understanding Bricked Lava Blaze Curve 5G

Have you ever heard the term “bricked” concerning your Lava Blaze Curve 5G device? This section explains it to you in simple terms. Imagine your device becoming like a brick, unresponsive and seemingly lifeless. That’s what happens when a Lava Blaze Curve 5G gets bricked. There are two main types of brick: soft brick and hard brick.

Soft Brick

Soft brick is like a temporary setback for your device. To see if your Lava Blaze Curve 5G is soft - bricked, check out the details below:

• It happens when the software encounters issues, but the hardware is usually fine.
• Your device might not start properly, freeze, or get stuck on the logo screen.

Hard Brick

Now, this is a more severe situation. In this case, your bricked Lava Blaze Curve 5G might fall under the following conditions:

• Thesoftware and hardware have significant problems, making the Lava Blaze Curve 5G device unresponsive.
• Your device won’t turn on and might not show any signs of life.

Common Causes of a Brick Lava Blaze Curve 5G

Now, let’s discuss why devices end up in this bricked state. It can happen due to a few common reasons:

• Failed Updates

Something might go wrong during the process when you’re trying to update your Lava Blaze Curve 5G device. This is properly because of a poor internet connection or other interruptions. As a result, your device might get confused and end up bricked.

• Custom ROM Installations

A custom ROM is like a customized version of your device’s software. While it can bring cool new features, it can also cause issues if not installed correctly. Incompatible or poorly made custom ROMs can sometimes lead to a bricked device.

• Unauthorized Modifications

If you’re trying to tweak your device’s software without proper knowledge, you might make changes that the Lava Blaze Curve 5G device can’t handle. This can lead to instability and, you guessed it, a bricked device.

So, why is it important to know all this? Well, a bricked device isn’t just frustrating; it can disrupt your daily life. You won’t be able to use your device, access your apps, or even make calls. That’s why unbricking is crucial.

Part 2: Top Android System Repair Software

Now that you’ve grasped the concept, let’s dive into how to unbrick a Lava Blaze Curve 5G. That’s where Android system repair software comes in. These clever programs are like doctors for your device’s software. They diagnose and fix issues to keep your appliance running smoothly. Let’s explore the cream of the crop when it comes to these software solutions:

Wondershare Dr.Fone – System Repair (Android)

Dr.Fone - System Repair (Android) is like a magic wand for your Lava Blaze Curve 5G device. It’s designed to rescue your device from troubles and make it run smoothly again. Dr.Fone - System Repair (Android) is built to  fix various issues, including a bricked device. It can resolve problems like black screens, frozen devices, boot loops, and even devices stuck in recovery mode.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

Key Features

Here’s what Dr.Fone offers as a powerful Android system repair software:

• Repair a wide variety of Android system issues.
• User-friendly interface that’s easy to navigate.
• No technical expertise required – it guides you step by step.
• Compatibility with a wide range of Lava Blaze Curve 5G devices.

Pros

Check out Dr. Fone’s benefits you can take advantage of:

• Easy and intuitive to use.
• Can fix a range of software-related problems.
• Doesn’t require deep technical knowledge.
• Can help you avoid expensive repair services

Cons

As for its drawback, refer below:

• Some complex issues might still require professional help.

How To Unbrick Lava Blaze Curve 5G Using Dr.Fone

This tutorial will show you how Dr.Fone can remove the brick from a Lava Blaze Curve 5G smartphone.

• Step 1: Launch Dr.Fone and head to the program’s left-hand panel, where you’ll find the Toolbox. You may fix your broken Android device by connecting it to your computer and selecting System Repair from the menu.

safe & secure

4,001,177 people have downloaded it

• Step 2: Select Android on the following screen to troubleshoot an Android device. After that, you’ll be brought to a new screen where you can initiate the fix by clicking Start.

• Step 3: When you click through to the next window, the service will automatically recognize the manufacturer of the Android device. Choose the appropriate Brand, Name, Model, Country, and Carrier from the drop-down menus. Select OPEN in the Carrier area if the phone is unlocked. The next step is to tick the box labeled I accept the risk and am ready to continue. Click Next to proceed with the rest of the Lava Blaze Curve 5G device repair.

• Step 4: Put your Lava Blaze Curve 5G into Download Mode when prompted.

• If your phone has a home button, follow the on-screen prompts to power it down. Keep pressing and holding the Volume Down, Home, and Power Then, press the Volume Upbutton to activate the Download Mode.

• If your Android doesn’t have a Home button, you may still use it byturning it off and pressing the Volume Down, Bixby, and Power buttons simultaneously. Repeatedly pressing the Volume Up button will activate Download Mode.

• Step 5: The firmware download starts on the platform immediately after the Lava Blaze Curve 5G device enters Download Mode. You can click Stop to abort it at any stage during the process. The platform then verifies and presents the information as it downloads. By selecting Fix Now, you can install the firmware.

• Step 6: The Android repair procedure may delete all of your data. To proceed, please type “000000” in the box provided. The system repair process will begin, and its status can be viewed in the next screen’s progress bar.

Take Note: Backing up your Android is necessary before doing any Android repair.

• Step 7: The prompt window will show the completion message. If the Android device boots normally, you can close the tool by clicking the Done button. Press the Try Again button to try powering on the Lava Blaze Curve 5G device again if it does not turn on automatically.

Repair System & Phone Master

This software is a real game-changer in resolving Android system problems. It specializes in repairing system issues, enhancing device performance, and cleaning up unnecessary files.

Key Features

Check out the key features of this software below:

• Repair a range of system issues, including bricking.
• Boost device speed and performance.
• Clean up junk files to free up space.
• The easy-to-use interface is suitable for all users.

Pros

Repair System & Phone Master’s advantages include the following:

• Straightforward operation.
• Focus on improving overall device performance.
• Can potentially extend your device’s lifespan.

Cons

Below is the disadvantage of this software:

• Repair capabilities might be limited for complex issues.

System Repair for Android

True to its name, System Repair for Android is designed to repair and rejuvenate your device’s Android system. It’s a reliable tool to tackle various software issues, including bricked devices.

Key Features

The key features of System Repair for Android app include:

• Repair various Android system problems.
• User-friendly interface for hassle-free operation.

Pros

As for its advantages, see the list below:

• Straightforward solution for commonsystem issues.
• Can save you from device replacement costs.

Cons

Check below to learn about this app’s drawback:

• Advanced issues might require professional intervention.

Phone Doctor Plus

Phone Doctor Plus is like a health check-up app for your device. It’s designed to repair system issues and diagnose hardware problems that might contribute to a bricked device.

Key Features

See Phone Doctor Plus’s essential features below:

• Diagnose and repair both software and hardware issues.
• Identify potential problems that could lead to bricking.

Pros

This app’s advantages include the following:

• Comprehensive diagnosis for both software and hardware.
• Can help you identify issues before they become serious.

Cons

Check out this app’s disadvantages below:

• Not solely focused on software repair, might not cover all scenarios.

Part 3: Tips on Preventing Future Bricking Incidents

Now that you know how to fix a bricked Lava Blaze Curve 5G smartphone, let’s focus on preventing it in the first place. Here are some simple steps you can take to keep your Lava Blaze Curve 5G device safe and sound:

• Regularly Check for Updates

Always keep your device’s software up to date. Updates often contain bug fixes and improvements that can prevent software-related issues.

• Use Reliable Tools and Software

When using any tools or software on your device, ensure they’re trusted and well-reviewed. Unreliable tools can lead to unexpected problems.

• Avoid Unauthorized Modifications

Avoid messing with your device’s software beyond basic settings unless you’re a tech expert. Unauthorized modifications can lead to bricking.

• Keep Your Battery Charged

Ensure your device has enough battery power before initiating software updates or installations. Low battery during critical processes can lead to issues.

• Backup Regularly

Regularly back up your device’s data to avoid losing important information during a bricking incident.

• Use Official Firmware

If you’re ever reinstalling or updating your device’s software, always use official firmware provided by the manufacturer.

• Utilize Safe Mode for Troubleshooting

If your device starts acting strange, try booting it into safe mode. This helps you identify if a third-party app is causing issues.

• Seek Professional Help

If you’re unsure about a particular action, seek help from experts. Trying to fix complex issues yourself can worsen the situation.

By following these easy tips, you can keep your Lava Blaze Curve 5G device running smoothly and avoid the hassle of dealing with a bricked device. Always remember, prevention is better than cure!

safe & secure

Conclusion

Encountering a bricked Lava Blaze Curve 5G device can be a frustrating roadblock. However, there’s a silver lining – the power of an Android system repair software like Dr.Fone – System Repair (Android). This user-friendly tool acts as your device’s superhero, rescuing it from the clutches of bricking incidents.

So, whether your device is experiencing a soft brick or a hard brick, you now have the best tools and knowledge to overcome it. Dive into the Android system repair software world, explore your options, and bid farewell to brick. Welcome a revived, functioning Lava Blaze Curve 5G device into your daily life.

How to Exit Android Factory Mode On Lava Blaze Curve 5G?

You’ve often heard that recovery mode will solve just about any problem your Lava Blaze Curve 5G is experiencing. This is mostly true and one of the components of Android’s recovery mode, factory mode or factory reset is one of the most efficient ways to solve various problems on your device. While factory mode is often a good thing, there are times when your device can enter factory mode on its own. Other times, you can safely enter factory mode but not know how to get out.

Fortunately for you, this article will explain all aspects of factory mode and especially how to safely exit factory mode.

Part 1. What is Android Factory Mode?

Factory mode or what is commonly known as factory reset is one of the options available for you when your Lava Blaze Curve 5G is in recovery mode. Several options are available for you once you enter Recovery mode on your device but few are as effective as the wipe data/ factory reset option. This option is useful in solving a whole host of problems that your device could be experiencing.

If you have been using your Lava Blaze Curve 5G for a while now and its performance to be less than ideal, a factory reset might be a good solution. That is however not the only problem a factory reset or factory mode can solve. It will also work for a number or Android errors that you may experience, problems caused by faulty firmware updates and also tweaks made on your device that may not have worked as expected.

It is however important to note that a factory reset or factory mode does often result in the loss of all your data. Therefore a backup is necessary to protect against this data loss risk.

Part 2. Backup your Android Device First

Before we can see how to safely enter and exit factory mode, it is important to have a full backup of your device. We mentioned that a factory mode will likely erase all the data on your device. A backup will ensure that you can get your phone back to its original state before the factory mode.

In order to do a full and complete backup of your device you need to have a tool that will not only ensure that you backup everything on your device but one that makes it easy for you to accomplish this. One of the best tools in the market is Dr.Fone - Backup & Resotre (Android) . This software is designed to enable you to create a full backup of your device.

Dr.Fone - Backup & Restore (Android)

Flexibly Backup and Restore Android Data

• Selectively backup Android data to computer with one click.
• Preview and restore backup to any Android devices.
• Supports 8000+ Android devices.
• There is no data lost during backup, export or restore.

3,428,803 people have downloaded it

Follow these very simple steps to use this MobileTrans Phone Transfer software to create a full backup of your device.

Step 1. Launch Dr.Fone on your computer and choose “Backup & Restore”

Run the software on your computer and you can see all features displayed in the primary window. Choose this one: Backup & Restore. It allows you to get your device backed up entirely with one click.

Step 2. Plug in with your device

Then plug in with your device to the computer. When your devic is detected, click on Backup.

Step 3. Select the file types to backup

The program will display all the file types it can support to backup. Just select the ones you would like to backup and hit Backup.

Step 4. Start backing up your device to the computer

After choosing the file’s type for backup, click “Backup” to begin backing up your device to your computer. It will take you a few minutes, depending on the storage of the data.

Note: You can use the feature of “Restore From Backup” to restore the backup file to your device, when you have the need later.

Part 3: One Click Solution to fix Android stuck in factory mode

From the above parts, you are well aware about what is factory mode. As we discussed, this mode fixes most troubles with Android devices.

But for situations when your Lava Blaze Curve 5G gets stuck in this very same factory mode, the most feasible solution for you is Dr.Fone - System Repair (Android) . This tool fixes all Android system issues including unresponsive or bricked device, stuck on Lava Blaze Curve 5G logo or factory mode or blue screen of death with a single click.

Dr.Fone - System Repair (Android)

One click fix to Android stuck in factory mode

• You can easily fix your Android stuck in factory mode with this tool.
• The one-click solution’s ease of operation is appreciable.
• It has carved a niche being the first Android repair tool in the market.
• You don’t need to be a pro in technology to use this program.
• It is compatible with all latest Lava Blaze Curve 5G devices like Galaxy S9.

3,645,867 people have downloaded it

In this part we will explain how to exit Android recovery mode using Dr.Fone - System Repair (Android) . Prior to proceeding, you got to remember that device backup is paramount to keep your data safe. This process might erase your Lava Blaze Curve 5G data.

Phase 1: Ready your device and connect it

Step 1: Installation completion needs to be followed by running Dr.Fone on your system. Over the program window, tap ‘Repair’ afterwards and get the Android device connected.

Step 2: Select the ‘Android Repair’ option from the list to fix Android stuck in factory modeissue. Hit the ‘Start’ button soon after.

Step 3: Select Android device details on the Lava Blaze Curve 5G device information window, followed by tapping the ‘Next’ button.

Step 4: Enter ‘000000’ for confirmation then proceed.

Phase 2: Get in ‘Download’ mode for repairing the Android device

Step 1: It’s important to put the Android device in ‘Download’ mode, here are the steps to do so –

• On a ‘Home’ button-less device – turn off the Lava Blaze Curve 5G device and push down the ‘Volume Down’, ‘Power’ and ‘Bixby’ buttons for about 10 seconds and un-hold. Now, hit the ‘Volume Up’ button to get into ‘Download’ mode.

• For a device with ‘Home’ button – switch it off and hold down the ‘Power’, ‘Volume Down’ and ‘Home’ buttons together for 10 seconds and release. Click the ‘Volume Up’ button for entering ‘Download’ mode.

Step 2: Press ‘Next’ for initiating firmware downloading.

Step 3: Dr.Fone –Repair (Android) starts Android repair as soon as download and verification of firmware is done. All Android issues along with Android stuck in factory mode will be fixed now.

Part 4. Common Solutions to Exit Factory Mode on Android

Having a backup of all your data will eliminate the risk of losing any of your data. You can now safely exit factory mode using one of the 2 methods below. These two methods will work on a rooted device.

Method 1: Using “ES File Explorer”

To use this method, you will need to have installed file explorer on your device.

Step 1: Open “ES File Explorer” and then press the icon on the top left corner

Step 2: Next, go to “Tools” and then turn on “Root Explorer”

Step 3: Go to Local> Device> efs> Factory App and then open factorymode as text in the “ES Note Editor” Turn it ON

Step 4: Open keystr as text in the “ES Note Editor” and change it to ON. Save it.

Step 5: Reboot the Lava Blaze Curve 5G device

Method 2: Using Terminal Emulator

Step 1: Install Terminal emulator

Step 2: Type “su”

Step 3: Then Type the following;

rm /efs/FactoryApp/keystr

rm /efs / FactoryApp/ Factorymode

Echo –n ON >> / efs/ FactoryApp/ keystr

Echo –n ON >> / efs/ FactoryApp/ factorymode

chown 1000.1000/ efs/FactoryApp/keystr

chown 1000.1000/ efs/FactoryApp/ factorymode

chmod 0744 / efs/FactoryApp/keystr

chmod 0744 / efs/ FactoryApp/ factorymode

reboot

You can also exit factory mode on unrooted device by going to Settings> Application manager> All and the search for Factory Test and “Clear Data”, “Clear Cache”

As much as factory mode can be a useful solution to a number of problems, it can be quite annoying when it pops up unexpectedly. Now you are equipped with 2 effective solutions to help you safely exit factory mode if ever you find yourself in this situation.

Also read: