Android Safe Mode - How to Turn off Safe Mode on Realme 12 Pro+ 5G?

Safe mode on Android is very useful to get rid of dangerous apps and malware. This allows the user to perform a uninstall of the crashed or malicious apps by putting safe mode on Android. Now the question is how to remove safe mode? In this article, we have discussed in detail how to get out of safe mode and also discussed some frequently asked questions. Keep reading this article.

Part 1: How to turn off safe mode on Android?

This is very important to turn off the safe mode after you put the safe mode on Android. Your mobile performance is limited in this mode. So you have to turn off safe mode. For doing this, there are some methods. Try to apply them one by one. If you succeed, stop there. Else go to the next method.

Method 1: Restarting the Realme 12 Pro+ 5G device

This is the easiest method to turn off the safe mode in Android. To use this method, follow the steps below.

Step 1 – Tap and hold the power button of your Realme 12 Pro+ 5G.

Step 2 – You could find the option “Restart”. Tap on it. (If you have only one option, move to the step no 2)

Step 3 – Now, your phone will boot up in some time and you can see the Realme 12 Pro+ 5G device is no more on safe mode.

This method, if goes well, will turn off safe mode in Android from your device. IF not, move to the next method instead.

Method 2: Do a soft reset:

The soft reset is very easy to perform. It won’t delete any of your personal files etc. Besides, it clears all the temp files and unnecessary data and recent apps so that you get a healthy device. This method is very good for turning off Safe mode on Android.

Step 1 – Tap and hold the power button.

Step 2 – Now, select “Power off” from the given option. This will make your device off.

Step 3 – Wait a few seconds and then turn it on again.

This time you can see your phone is no more in safe mode. Also, your junk files have been also removed. If you still find the Realme 12 Pro+ 5G device is the safe mode, follow the next method.

Method 3: Break all power

This method is sometimes very helpful to turn off safe mode on android by disconnecting all the power as well as resetting the SIM card.

Step 1 – Take the back cover off from the Realme 12 Pro+ 5G device and remove the battery. (Not all devices will give you this facility)

Step 2 – Take out the SIM card.

Step 3 – Reinsert the SIM card and insert the battery again.

Step 4 – Turn the Realme 12 Pro+ 5G device on by tapping and holding the power button.

Now, you can see your device is out of safe mode. If you still find your device in Safe mode, see the next method.

Method 4: Wipe the cache of the Realme 12 Pro+ 5G device.

The cache of the Realme 12 Pro+ 5G device sometimes creates an obstacle in overcoming the safe mode on Android. To solve this issue, follow the steps below.

Step 1 – Turn on your device in safe mode. It can generally be done by tapping the home, power, and volume up button on Android device. If this combination is not working for you, search the internet with your device model number.

Step 2 – Now you can find the recovery mode screen. Navigate to the “Wipe cache” option with the volume up and down button and select the option by tapping the power button.

Step 3 – Now follow on-screen instruction and your device will be rebooted.

After successful completion of this method, your device should no longer be in safe mode. If the problem still persists, the only solution is to do a factory reset. This will erase all the data from your device. So take backup of your internal storage.

Method 5: Factory data reset

To factory data reset, you have to follow the below steps.

Step 1 – Enter in the recovery mode by following the steps mentioned earlier.

Step 2 – Now select “Factory data reset” from the given options.

Step 3 – Now, follow the on-screen instructions and your device will be factory reset.

After this method, you can successfully get rid of the safe mode on Android. Restore your data from the backup you created.

Watch the video below to turn off safe mode on your phone:

Part 2: How to put the phone in safe mode?

If some apps or programs create a problem on your device, the solution is safe mode. Safe mode allows you to uninstall the app or the program out of your device safely. So, safe mode on Android is quite useful sometimes. Let’s have a look at how to turn on safe mode in Android.

Before this, remember to take a backup of your Realme 12 Pro+ 5G. We recommend you to use the Dr.Fone - Phone Backup (Android). This tool is the best in its class to provide users with a very easy-to-use user interface yet powerful solution.

Dr.Fone - Phone Backup (Android)_

Flexibly Backup and Restore Android Data

• Selectively backup Android data to the computer with one click.
• Preview and restore the backup to any Android devices.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restore.

Always remember to use this tool before you enter in the safe mode as you never know what will happen next and you might end up with factory resetting. This, as the result, will erase all your valuable data. So always perform backup data before you proceed.

To enter the safe mode, follow the instructions below.

Step  1 – First of all, long press the power button and let the Power options appear.

Step 2 – Now, long press on the “Power off” option. This will instantly ask you if you want to reboot into safe mode. Select the option and your device will reboot in safe mode.

If you are using Android version 4.2 or earlier, turn off the Realme 12 Pro+ 5G device and turn it on the back by tapping the power button. When the logo appears, tap and hold the volume down button. This will allow the Realme 12 Pro+ 5G device to boot in safe mode.

Follow these steps carefully and now you can see a “Safe Mode” written at the corner of your device. This will confirm that you have successfully entered in Safe mode on Android.

Part 3: Safe mode on Android FAQs

In this section, we’ll discuss some frequently asked questions about the safe mode. Some users have many questions regarding the safe mode. Here we’ll try to cover some of them.

1. Why is My Realme 12 Pro+ 5G on safe mode?

This is a very common question around the world. For many Android device users, it’s quite common to see your phone in safe mode suddenly. Android is a secure platform and if your device sees any threat from your recently installed apps or any programs that want to harm your device; it would go into safe mode automatically. Sometimes, you might accidentally perform the steps discussed in part 2 and boot your device in safe mode.

2. Safe mode won’t turn off on My Realme 12 Pro+ 5G

For the solution to remove safe mode from your device you must follow the step-by-step methods as mentioned in part 1. This will surely take your device out of the safe mode.

The safe mode is a very useful program for any Android device. But it limits the programs of Android and you must remove safe mode after uninstalling the harmful app. This article showed you how to turn off safe mode easily.

Try It Free Try It Free

How to Fix Unfortunately, Contacts Has Stopped Error on Realme 12 Pro+ 5G

Have you recently noticed a message stating “Contacts has stopped”? This is enough to take away all your peace. As, our native contacts app stashes all our useful contacts which are time and again needed by a user. It’s malfunctioning is enough to give us chills. But, why the Realme 12 Pro+ 5G or any other Android device incurs such problems?

It can occur while you launch the app or while you’re in the app already finding the required contact or when any other application is trying to gain access to it. So, to rage a battle with this issue, you need to seek help of some powerful methods in killing down the issue of contacts app crashes. And, the best part is that you’ve secured yourself by reaching the right place. We will be taking an in-depth discussion on several methods that may prove to be helpful. Let’s read them up here now.

Part 1: Get Android system fixed in one click

We’re always in search of a method that provides handy solution in a quite speedy and hassle-free manner. There are hundreds of tips and tricks for the same. You never know the possibility of firmware being the major drawback. No amount of manual methods can beat the performance of Dr.Fone - System Repair (Android).It is capable of providing 100% solution to any kind of issues, your phone gets troubled with. It is designed with the technology of combating the problem of black screen of death, app crashes and several other issues. In just a single-click, ward off the issue and free your device with errors

Dr.Fone - System Repair (Android)

Fix Contacts app crashing on Android in one click

• Incorporates with 1-click technology to resolve any issues occurring in your Realme 12 Pro+ 5G. Black screen of death, app crash, system crash, faulty issues etc.
• fone – Repair (Android) interface is extremely simple for users and lays functionalities aptly.
• One of its kind software with highest success rate in the market.
• Fully compatible with all kinds of Android phones, models, as well as the popular carrier.
• It provides users with 24 hours customer care service to resolve queries.

3,016,434 people have downloaded it

In this tutorial, we will learn the methodology of addressing the contacts keep stopping problem and gain triumph over it.

Step 1: Load program and draw connection of device

Download Dr.Fone - System Repair (Android) on PC. While program installs, use USB cable to connect device with system. From interface, tap on “System Repair” main window.

Step 2: Opt for Android Repair option

You’ll be directed to the “System Repair” screen where you have to opt for “Android Repair” options appearing over the left panel of the program. After that, do not forget to press “Start”.

Step 3: Key in device information

From following screen, fill the fields of “Brand”, “Name”, “Model”, “Country” and several other parameters. Then, tap on “Next” option to proceed further.

Step 4: Download Firmware package

Just follow the on-screen steps for booting your Realme 12 Pro+ 5G into download mode. Then, hit the “Next” button to proceed with downloading the most suitable firmware package for your Realme 12 Pro+ 5G.

Step 5: Repair Android phone

Once the software downloads, the program will automatically repair any issues irking over your phone. Now, your phone is all free from contacts error.

Part 2: 9 Common ways to fix “Unfortunately, Contacts Has Stopped”

2.1 Restart Android system

Our response to any minuscule issue is straightaway restarting phone. This helps in clearing out any problem that might have disrupt the functioning of phone. So, to fix the problem of “Contacts app won’t open”, you too can try out your hand in this method.

1. Get hold of your Android system and long press the power button.
2. This will fadeout the main screen and showcase several options from where you’ve to tap on “Reboot/Restart” mode.

Now, your device will quickly reboot the Realme 12 Pro+ 5G device. Once, the Realme 12 Pro+ 5G device regains its normal state, check whether the issue is coming again or not.

2.2 Clear cache and data of Contacts app

The cache memory basically stashes the copies of the concerned application. It is indeed a streak of copies of the desired app storing information and incurring additional space on the storage. This might be the reason why the contact app crashes rapidly on your Realme 12 Pro+ 5G. Hence, it can prove to be a good remedy for this problem. Just follow down the steps mentioned below-

1. First of all, go to “Settings” application from the app drawer or from the notification panel.
2. Now, surf and select for “Applications” or “Apps & notifications”.
3. Here, you need to browse for “Contacts” app and open it.
4. On “Contacts” app, just tap on “CLEAR CACHE” and “CLEAR DATA” button. This will prompt the cache memory to be cleared.

2.3 Wipe cache partition

As we know the cache memories are the temporary files build by the firmware. These are of little importance as they are bound to become a bit more corrupted in nature. And sometimes, may indirectly become a hurdle for the working of contacts app. It is good if the Realme 12 Pro+ 5G device is cleared off from the caches. Instead of manually wiping down the cache memory, we will understand how to clear off the cache partition in the following steps.

1. From device, just power off your device. Then, press the “Volume Down + Power” button with “Home” combinations together.
2. In a moment’s time, lose fingers from the “Power” button but do not release fingers from “Volume Down” and “Home” buttons.
3. Once you view the “Android System Recovery” screen, just lose the “Volume Down” and “Home” buttons.
4. Over the options available, just opt for “wipe cache partition” by tapping the “Volume down” button until the desired option is highlighted.
5. Finally, push the “Power” key to give consent to the selection.

7. After, the process is through there will be an option for “Reboot System Now”. Tap on it and restart the Realme 12 Pro+ 5G device.

2.4 Disable Google+ app

The root cause for detecting any problem is not very easy. You never know the overloading of Google + application might have directly impacted contacts app crashes. To resolve it, disabling it may prove to be a helpful solution. Here is the quick reference for disabling Google+ application.

1. First of all, visit “Settings” from your Realme 12 Pro+ 5G.
2. In “Settings”, visit the “Application Manager” or “Applications” menu and browse for “Google +” app.
3. From the application main page, you can choose to do either of the methods:

• Either, completely disable the application to work by pressing on “Force stop” or “Disable” feature.
• Or, brush away the unnecessary cache piled up on your storage by using “Clear Cache” functionality.

There will be a prompt stating that the application may misbehave. However, you must disable the feature and check whether it worked out for you or not.

2.5 Update your device software

Many a times, we skip updating our device software thinking it is of less importance. In fact, one must not miss out the updates that occurs in phone. As, without the updates, the scope of some applications are affected to some extent. For its better functioning and avoiding issues like “contacts keep stopping”, here is how you should update device software.

1. First and foremost, head on to “Settings” menu. Over there, click on “About Device”.
2. There, you need to tap over “Software Update”.

The device will now check whether there are any updates available for your device. If yes, then update application right away.

2.6 Reset App Preferences

As stated, the malfunctioning of contacts can be due to be any unexpected reason. Hence, users can opt for resetting app preferences. This may prove to be helpful in brushing away the issue of “Contacts app won’t open”.

• Launch “Settings” app and surf for “Apps” or “Applications” option on your Realme 12 Pro+ 5G.
• Just, tap over the three dots appearing at the upper right section and then tap on “Reset app preferences”.
• At last, just select “Reset default apps”.

2.7 Delete voicemail

Do you happen to exchange voicemails quite often? It can trigger to be the reason for contact app crashes. If your device happens to have a bulk of voicemails, you must get rid of them sooner or later. As, these might standout to be the prime reason for contacts stopping on Realme 12 Pro+ 5G. If you’re unaware about the procedure of removing all kinds of voicemails, you can proceed to make use of the following steps.

1. Start with, launching the “Google Voice” app.
2. From there, duly opt for “Voicemail”.
3. Just click on the press menu option and at last select “Delete” option.

2.8 Uninstall the downloaded apps

Some applications contain some unwanted advertisements and some elements of malware. This can be enough for disrupting the functionality of the built-in contact app won’t open. It is crucial for your phone to be detoxed from such elements. You need to manually scrap off such applications. Do, ensure to download the application from the genuine source for future use.

• On your Realme 12 Pro+ 5G, just go to “Home” screen and tap on “Apps” icon.
• Then, tap on “Settings” icon followed by going to “Applications” or “Apps & Preferences” menu.
• After that, tap on “Menu icon” which will showcase the apps installed on device.
• Simply, open the app and hit the “Uninstall” button to brush away that app. Repeat the same with other application(s).

Now, check whether you’ve fought the battle with the problem or not.

2.9 Reset to Factory Settings

Last but not least, if all the methods falls flat to resolve the issue of contacts app won’t open. Then, it might be your device has some internal problem. This can be any software crash which might not be fixing with the aforementioned steps. That is where reset to factory settings may prove to be a good option. With this method, your phone will be cleared of all the components, settings and everything present in it. Here are is the comprehensive tutorial for biding bye to the problem of contacts app won’t open.

Note: Do ensure to take a backup of all the data available in your device. As, we don’t want you to regret afterwards.

• Just go to “Settings” and surf and select “Backup & Reset” option.
• You need to toggle on the option for performing the backup on your Google account.
• Then, tap on “Reset” button and then tick mark the option for resetting your phone.

How To Fix Part of the Touch Screen Not Working on Realme 12 Pro+ 5G

You probably touch the screen of your phone hundreds of times per day. It’s no surprise that smartphone touchscreens are one of the most common components to fail, given their delicate glass construction. However, a part of the touch screen not working on your Realme 12 Pro+ 5G does not necessarily mean it is a hardware issue. There could be other reasons why your Android’s touch screen stopped responding.

If your phone’s touchscreen frequently fails to respond, there are several things you can try before calling a professional. This article will reveal those proven fixes you can easily perform independently.

Part 1. Why Is Part of My Screen Not Working

There are two possible causes as to why your phone’s touch screen is not working. One is the touch screen may have been damaged, and the other is the Realme 12 Pro+ 5G device may be experiencing technical difficulties.

If you drop your phone and it becomes stuck against something, the touch screen’s connectivity may fail. Only a part of the touch screen may sometimes become damaged and unresponsive. That may also occur when there is a technical failure, such as the phone hanging. A part of the touch screen not working can occur when malware is downloaded or when phone settings are changed.

Now, the problem can affect any Android phone, and users may encounter the following error messages on their respective phone models:

• Realme 12 Pro+ 5G P40 lite half touch screen not working
• Nexus touch screen not working
• LG screen is unresponsive to touch
• Realme 12 Pro+ 5G left side of the screen is not working
• Redmi’s whole screen is unresponsive to touch

Part 2. Different Types of Touch Screen Issues and What You Should Check Before Fixing

You may experience a variety of touch screens not working on Android issues:

• A certain part of the touch screen is not working.
• Your touches do not register on the touch screen.
• The touch screen incorrectly responds to your touch.
• Half touch screen is not working.
• The touch screen becomes frozen or hangs.
• The screen flashes, flickers, or remains blank.
• Theleft side of the phone screen is not working.

Before proceeding to how to fix an unresponsive touch screen on an Android device, you should complete the following steps:

• Examine the screen of your device. Check to see if it is cracked or chipped.
• If the screen is damaged, it must be replaced.
• Remove the Realme 12 Pro+ 5G device cover and screen protector if they are not damaged.
• If there is a sticker on the Realme 12 Pro+ 5G device screen, you must remove it.
• Before continuing, make sure your screen is spotless.

Part 3. How To Fix Part of the Touch Screen Not Working (No Physical Damage)

If you have already tried running the Realme 12 Pro+ 5G device in diagnostic mode and verified that it is not physically damaged, then the problem is most likely technical. If your Realme 12 Pro+ 5G’s screen is not responding to touches for technical reasons, follow the methods below to resolve the issue.

Restart Your Device

When your touch screen stops working, the first thing you should do is restart your device. The operation is known as soft resetting. You cannot turn your device off from the option on the screen because the touch screen is not responding. Here are the steps to take.

Step 1: Hold the “Power” button until the Realme 12 Pro+ 5G device turns off.

Tip: If you hold down the power button for a few seconds, you will see the “Power Off” and “Restart” options on the screen. You can’t use it because the entire screen isn’t responding. Hence, you should press and hold the “Power” button for as long as necessary.

Step 2: When the Realme 12 Pro+ 5G device turns off, wait a few seconds.

Step 3: Press and hold the “Power” button to restart the Realme 12 Pro+ 5G device.

Check to see if the Android auto touch screen is not working problem has been resolved. Otherwise, proceed with the following methods.

Turn On Safe Mode

You should switch to Safe mode whenever an application or piece of software causes a problem on your device. Only the most fundamental system components are loaded and used when operating in Safe mode.

If your touch screen is functional in safe mode, the issue is most likely internal. You can quickly fix the Android touchscreen issue by following the prompts given below to activate the safe mode:

Step 1: To force a restart, press and hold the Realme 12 Pro+ 5G device’s “Power” button for an extended period.

Step 2: Maintain pressure on the “Power” button. Take your finger off it once you see the manufacturer’s logo.

Step 3: When you let go of the “Power” button, press and hold the “Volume Down” button. After that, a “Safe Mode” label will appear in your screen’s lower-left corner.

Turn Off Developer Options

Every smartphone is bound to have limitations. However, smartphone makers include a “Developer Options” menu for advanced users. Here, restrictions are removed, and user preferences can be customized.

If you enable Developer Options on some Android devices, they may stop working properly. If you have recently activated Developer Options and your touchscreen is no longer responding as expected, you should disable it. To do so, follow the instructions below:

Step 1: Launch the Settings app on your device.

Step 2: Select the System menu item, which usually locates at the bottom of the screen.

Step 3: Tap the Advanced options menu, then select Developer Options.

Step 4: You will then find the switch to turn it on or off. Disable itby toggling the button off.

Step 5: Restart your device to check if the part of the touch screen not working issue has been resolved.

Reset Device to Factory Settings

Resetting your device to its factory settings will return it to its state when you first unboxed it. All your phone’s data and installed apps will be erased, including any malware on your device that may be causing the issue to occur. Here’s how to restore your device to factory settings:

Step 1: Since your touch screen is not working, you can factory reset it using Google’s Find My Device web service.

Step 2: Go to Find My Device from any device and sign in to the Google account associated with the damaged screen device.

Step 3: After successfully logging in, you will see your device’s name. Select the Erase Device option.

Step 4: Confirm by pressing the Erase Device button.

Tip: Since all your data will be removed, it’s recommended to back up your data first before resetting your device to factory settings.

Part 4. Fix Using a Third-Party App – Wondershare Dr.Fone

If you’ve exhausted all other options and still can’t fix your Android’s part of the touch screen not working issue, it’s time to resort to Dr.Fone – System Repair! It allows you to repair Android system issues with a single click.

Many users have reported exceptions on their Android devices, such as touch screen failure, black screen of death, system UI failure, app crashing, etc. And in this case, people should seek an Android repair tool.

Dr.Fone – System Repair has made it easier than ever for Android users experiencing technical issues with their device, including an unresponsive touch screen, among other system issues. The best part is that no data will be lost while repairing Android system issues.

Follow the steps given below on how to use Wondershare Dr.Fone System Repair for Android:

Step 1: Select the System Repair option from the main window after starting Dr. Fone.

Step 2: Connect your Realme 12 Pro+ 5G or tablet to the computer using the appropriate cable. Choose Android Repair from the three options shown on the left side of the screen.

Step 3: The device information screen will appear in the next window. There, input your device’s unified brand, name, model, country/region, and carrier information. Then click Next after you confirm the warning.

The Android repair procedure may wipe out all data on your device. To confirm and proceed, enter “000000”.

Note: It is strongly advised that you back up your Android data before attempting Android repair.

Step 4: Before repairing your Realme 12 Pro+ 5G, you must boot it into Download mode. To boot your Realme 12 Pro+ 5G or tablet into DFU mode, follow the steps below:

For a device that has a Home button:

1. Turn off your phone or tablet.
2. Hold the Volume Down, Home, and Power buttons for 5 to 10 seconds.
3. To enter Download mode, release all the buttons and press the Volume Up button.

For a device that lacks a Home button:

1. Turn off the Realme 12 Pro+ 5G device.
2. Hold the Volume Down, Bixby, and Power buttons for 5 to 10 seconds.
3. To enter Download mode, release all the buttons and press the Volume Up button.

Step 5: Then press the Next button. The program will then download the firmware. After downloading and verifying the firmware, the program will automatically repair your Realme 12 Pro+ 5G. And in a while, your Realme 12 Pro+ 5G’s system issues will be resolved.

Supported OS

Check Dr.Fone’s supported operating systems below before using the application to fix your mobile technical issues.

Platform	Supported OS
Windows	Windows 11/10/8.1/8/7/Vista/XP
Mac	Mac 14/13/12/11/10.15/10.14/X/10.13/10.12/10.11/10.10/10.9/10.8

Key Features

Dr.Fone – System Repair is a data management and recovery tool that contains several toolkits in one program, each designed to repair a specific phone problem. Check out its key features below:

• One-click Android Repair Tool
• Troubleshoots and repairs a wide range of Android system problems, including black screen of death, Play Store not working, apps crashing, phone stuck in a boot loop, and bricked Android issues
• A high success rate for fixing Android system issues
• Fixes Android system back to normal

Pros

Here are the advantages of using Dr.Fone – System Repair:

• Highly intuitive UI/UX/. No need for any skill to operate it
• Provides a comprehensive set of toolkits, including advanced data recovery and system repair
• Data management is simple and seamless for both Android and iOS devices
• Data backup with Dr. Fone is simple and quick.

Cons

Check below to know Dr.Fone – System Repair’s limitations:

• Depending on the toolkit required, the program can be costly.

safe & secure

Conclusion

Fixing an Android part of the touch screen not working issue can be quickly done with just a few fixes you can do on your own. However, there may be times when the solutions provided above may not work, and the worst part is factory resetting your phone erases all your data.

That’s why Dr.Fone – System Repair might be your best solution. It has all the tools you need to keep your Realme 12 Pro+ 5G 100%. Not only that, but with Dr.Fone, you can repair your Android system issues without dealing with any data loss.

Also read: