Android Safe Mode - How to Turn off Safe Mode on Tecno Spark 20 Pro+?

Safe mode on Android is very useful to get rid of dangerous apps and malware. This allows the user to perform a uninstall of the crashed or malicious apps by putting safe mode on Android. Now the question is how to remove safe mode? In this article, we have discussed in detail how to get out of safe mode and also discussed some frequently asked questions. Keep reading this article.

Part 1: How to turn off safe mode on Android?

This is very important to turn off the safe mode after you put the safe mode on Android. Your mobile performance is limited in this mode. So you have to turn off safe mode. For doing this, there are some methods. Try to apply them one by one. If you succeed, stop there. Else go to the next method.

Method 1: Restarting the Tecno Spark 20 Pro+ device

This is the easiest method to turn off the safe mode in Android. To use this method, follow the steps below.

Step 1 – Tap and hold the power button of your Tecno Spark 20 Pro+.

Step 2 – You could find the option “Restart”. Tap on it. (If you have only one option, move to the step no 2)

Step 3 – Now, your phone will boot up in some time and you can see the Tecno Spark 20 Pro+ device is no more on safe mode.

This method, if goes well, will turn off safe mode in Android from your device. IF not, move to the next method instead.

Method 2: Do a soft reset:

The soft reset is very easy to perform. It won’t delete any of your personal files etc. Besides, it clears all the temp files and unnecessary data and recent apps so that you get a healthy device. This method is very good for turning off Safe mode on Android.

Step 1 – Tap and hold the power button.

Step 2 – Now, select “Power off” from the given option. This will make your device off.

Step 3 – Wait a few seconds and then turn it on again.

This time you can see your phone is no more in safe mode. Also, your junk files have been also removed. If you still find the Tecno Spark 20 Pro+ device is the safe mode, follow the next method.

Method 3: Break all power

This method is sometimes very helpful to turn off safe mode on android by disconnecting all the power as well as resetting the SIM card.

Step 1 – Take the back cover off from the Tecno Spark 20 Pro+ device and remove the battery. (Not all devices will give you this facility)

Step 2 – Take out the SIM card.

Step 3 – Reinsert the SIM card and insert the battery again.

Step 4 – Turn the Tecno Spark 20 Pro+ device on by tapping and holding the power button.

Now, you can see your device is out of safe mode. If you still find your device in Safe mode, see the next method.

Method 4: Wipe the cache of the Tecno Spark 20 Pro+ device.

The cache of the Tecno Spark 20 Pro+ device sometimes creates an obstacle in overcoming the safe mode on Android. To solve this issue, follow the steps below.

Step 1 – Turn on your device in safe mode. It can generally be done by tapping the home, power, and volume up button on Android device. If this combination is not working for you, search the internet with your device model number.

Step 2 – Now you can find the recovery mode screen. Navigate to the “Wipe cache” option with the volume up and down button and select the option by tapping the power button.

Step 3 – Now follow on-screen instruction and your device will be rebooted.

After successful completion of this method, your device should no longer be in safe mode. If the problem still persists, the only solution is to do a factory reset. This will erase all the data from your device. So take backup of your internal storage.

Method 5: Factory data reset

To factory data reset, you have to follow the below steps.

Step 1 – Enter in the recovery mode by following the steps mentioned earlier.

Step 2 – Now select “Factory data reset” from the given options.

Step 3 – Now, follow the on-screen instructions and your device will be factory reset.

After this method, you can successfully get rid of the safe mode on Android. Restore your data from the backup you created.

Watch the video below to turn off safe mode on your phone:

Part 2: How to put the phone in safe mode?

If some apps or programs create a problem on your device, the solution is safe mode. Safe mode allows you to uninstall the app or the program out of your device safely. So, safe mode on Android is quite useful sometimes. Let’s have a look at how to turn on safe mode in Android.

Before this, remember to take a backup of your Tecno Spark 20 Pro+. We recommend you to use the Dr.Fone - Phone Backup (Android). This tool is the best in its class to provide users with a very easy-to-use user interface yet powerful solution.

Dr.Fone - Phone Backup (Android)_

Flexibly Backup and Restore Android Data

• Selectively backup Android data to the computer with one click.
• Preview and restore the backup to any Android devices.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restore.

Always remember to use this tool before you enter in the safe mode as you never know what will happen next and you might end up with factory resetting. This, as the result, will erase all your valuable data. So always perform backup data before you proceed.

To enter the safe mode, follow the instructions below.

Step  1 – First of all, long press the power button and let the Power options appear.

Step 2 – Now, long press on the “Power off” option. This will instantly ask you if you want to reboot into safe mode. Select the option and your device will reboot in safe mode.

If you are using Android version 4.2 or earlier, turn off the Tecno Spark 20 Pro+ device and turn it on the back by tapping the power button. When the logo appears, tap and hold the volume down button. This will allow the Tecno Spark 20 Pro+ device to boot in safe mode.

Follow these steps carefully and now you can see a “Safe Mode” written at the corner of your device. This will confirm that you have successfully entered in Safe mode on Android.

Part 3: Safe mode on Android FAQs

In this section, we’ll discuss some frequently asked questions about the safe mode. Some users have many questions regarding the safe mode. Here we’ll try to cover some of them.

1. Why is My Tecno Spark 20 Pro+ on safe mode?

This is a very common question around the world. For many Android device users, it’s quite common to see your phone in safe mode suddenly. Android is a secure platform and if your device sees any threat from your recently installed apps or any programs that want to harm your device; it would go into safe mode automatically. Sometimes, you might accidentally perform the steps discussed in part 2 and boot your device in safe mode.

2. Safe mode won’t turn off on My Tecno Spark 20 Pro+

For the solution to remove safe mode from your device you must follow the step-by-step methods as mentioned in part 1. This will surely take your device out of the safe mode.

The safe mode is a very useful program for any Android device. But it limits the programs of Android and you must remove safe mode after uninstalling the harmful app. This article showed you how to turn off safe mode easily.

Try It Free Try It Free

Top 4 Android System Repair Software for Tecno Spark 20 Pro+ Bricked Devices

Is your Tecno Spark 20 Pro+ device showing signs of being “bricked” or “soft-bricked”? When a Tecno Spark 20 Pro+ is bricked, it becomes unresponsive and unusable. But fear not, as this article will guide you through reviving your device’s functionality. It will delve into the significance of unbricking and how it restores usability.

Moreover, this article will introduce you to the world of Tecno Spark 20 Pro+ unbrick tools and software, ensuring you can get your device back on track. So read on and explore the top Android system repair software that can bring life back to your bricked Tecno Spark 20 Pro+ device.

Part 1: Understanding Bricked Tecno Spark 20 Pro+

Have you ever heard the term “bricked” concerning your Tecno Spark 20 Pro+ device? This section explains it to you in simple terms. Imagine your device becoming like a brick, unresponsive and seemingly lifeless. That’s what happens when a Tecno Spark 20 Pro+ gets bricked. There are two main types of brick: soft brick and hard brick.

Soft Brick

Soft brick is like a temporary setback for your device. To see if your Tecno Spark 20 Pro+ is soft - bricked, check out the details below:

• It happens when the software encounters issues, but the hardware is usually fine.
• Your device might not start properly, freeze, or get stuck on the logo screen.

Hard Brick

Now, this is a more severe situation. In this case, your bricked Tecno Spark 20 Pro+ might fall under the following conditions:

• Thesoftware and hardware have significant problems, making the Tecno Spark 20 Pro+ device unresponsive.
• Your device won’t turn on and might not show any signs of life.

Common Causes of a Brick Tecno Spark 20 Pro+

Now, let’s discuss why devices end up in this bricked state. It can happen due to a few common reasons:

• Failed Updates

Something might go wrong during the process when you’re trying to update your Tecno Spark 20 Pro+ device. This is properly because of a poor internet connection or other interruptions. As a result, your device might get confused and end up bricked.

• Custom ROM Installations

A custom ROM is like a customized version of your device’s software. While it can bring cool new features, it can also cause issues if not installed correctly. Incompatible or poorly made custom ROMs can sometimes lead to a bricked device.

• Unauthorized Modifications

If you’re trying to tweak your device’s software without proper knowledge, you might make changes that the Tecno Spark 20 Pro+ device can’t handle. This can lead to instability and, you guessed it, a bricked device.

So, why is it important to know all this? Well, a bricked device isn’t just frustrating; it can disrupt your daily life. You won’t be able to use your device, access your apps, or even make calls. That’s why unbricking is crucial.

Part 2: Top Android System Repair Software

Now that you’ve grasped the concept, let’s dive into how to unbrick a Tecno Spark 20 Pro+. That’s where Android system repair software comes in. These clever programs are like doctors for your device’s software. They diagnose and fix issues to keep your appliance running smoothly. Let’s explore the cream of the crop when it comes to these software solutions:

Wondershare Dr.Fone – System Repair (Android)

Dr.Fone - System Repair (Android) is like a magic wand for your Tecno Spark 20 Pro+ device. It’s designed to rescue your device from troubles and make it run smoothly again. Dr.Fone - System Repair (Android) is built to  fix various issues, including a bricked device. It can resolve problems like black screens, frozen devices, boot loops, and even devices stuck in recovery mode.

Glarysoft File Recovery Pro Annually - Helps to recover your lost file/data, even permanently deleted data.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

Key Features

Here’s what Dr.Fone offers as a powerful Android system repair software:

• Repair a wide variety of Android system issues.
• User-friendly interface that’s easy to navigate.
• No technical expertise required – it guides you step by step.
• Compatibility with a wide range of Tecno Spark 20 Pro+ devices.

Pros

Check out Dr. Fone’s benefits you can take advantage of:

• Easy and intuitive to use.
• Can fix a range of software-related problems.
• Doesn’t require deep technical knowledge.
• Can help you avoid expensive repair services

Cons

As for its drawback, refer below:

• Some complex issues might still require professional help.

How To Unbrick Tecno Spark 20 Pro+ Using Dr.Fone

This tutorial will show you how Dr.Fone can remove the brick from a Tecno Spark 20 Pro+ smartphone.

• Step 1: Launch Dr.Fone and head to the program’s left-hand panel, where you’ll find the Toolbox. You may fix your broken Android device by connecting it to your computer and selecting System Repair from the menu.

safe & secure

4,001,177 people have downloaded it

• Step 2: Select Android on the following screen to troubleshoot an Android device. After that, you’ll be brought to a new screen where you can initiate the fix by clicking Start.

• Step 3: When you click through to the next window, the service will automatically recognize the manufacturer of the Android device. Choose the appropriate Brand, Name, Model, Country, and Carrier from the drop-down menus. Select OPEN in the Carrier area if the phone is unlocked. The next step is to tick the box labeled I accept the risk and am ready to continue. Click Next to proceed with the rest of the Tecno Spark 20 Pro+ device repair.

• Step 4: Put your Tecno Spark 20 Pro+ into Download Mode when prompted.

• If your phone has a home button, follow the on-screen prompts to power it down. Keep pressing and holding the Volume Down, Home, and Power Then, press the Volume Upbutton to activate the Download Mode.

• If your Android doesn’t have a Home button, you may still use it byturning it off and pressing the Volume Down, Bixby, and Power buttons simultaneously. Repeatedly pressing the Volume Up button will activate Download Mode.

• Step 5: The firmware download starts on the platform immediately after the Tecno Spark 20 Pro+ device enters Download Mode. You can click Stop to abort it at any stage during the process. The platform then verifies and presents the information as it downloads. By selecting Fix Now, you can install the firmware.

• Step 6: The Android repair procedure may delete all of your data. To proceed, please type “000000” in the box provided. The system repair process will begin, and its status can be viewed in the next screen’s progress bar.

Take Note: Backing up your Android is necessary before doing any Android repair.

• Step 7: The prompt window will show the completion message. If the Android device boots normally, you can close the tool by clicking the Done button. Press the Try Again button to try powering on the Tecno Spark 20 Pro+ device again if it does not turn on automatically.

Repair System & Phone Master

This software is a real game-changer in resolving Android system problems. It specializes in repairing system issues, enhancing device performance, and cleaning up unnecessary files.

Key Features

Check out the key features of this software below:

• Repair a range of system issues, including bricking.
• Boost device speed and performance.
• Clean up junk files to free up space.
• The easy-to-use interface is suitable for all users.

Pros

Repair System & Phone Master’s advantages include the following:

• Straightforward operation.
• Focus on improving overall device performance.
• Can potentially extend your device’s lifespan.

Cons

Below is the disadvantage of this software:

• Repair capabilities might be limited for complex issues.

OtsAV TV Webcaster

System Repair for Android

True to its name, System Repair for Android is designed to repair and rejuvenate your device’s Android system. It’s a reliable tool to tackle various software issues, including bricked devices.

Key Features

The key features of System Repair for Android app include:

• Repair various Android system problems.
• User-friendly interface for hassle-free operation.

Pros

As for its advantages, see the list below:

• Straightforward solution for commonsystem issues.
• Can save you from device replacement costs.

Cons

Check below to learn about this app’s drawback:

• Advanced issues might require professional intervention.

Phone Doctor Plus

Phone Doctor Plus is like a health check-up app for your device. It’s designed to repair system issues and diagnose hardware problems that might contribute to a bricked device.

Key Features

See Phone Doctor Plus’s essential features below:

• Diagnose and repair both software and hardware issues.
• Identify potential problems that could lead to bricking.

Pros

This app’s advantages include the following:

• Comprehensive diagnosis for both software and hardware.
• Can help you identify issues before they become serious.

Cons

Check out this app’s disadvantages below:

• Not solely focused on software repair, might not cover all scenarios.

Part 3: Tips on Preventing Future Bricking Incidents

Now that you know how to fix a bricked Tecno Spark 20 Pro+ smartphone, let’s focus on preventing it in the first place. Here are some simple steps you can take to keep your Tecno Spark 20 Pro+ device safe and sound:

• Regularly Check for Updates

Always keep your device’s software up to date. Updates often contain bug fixes and improvements that can prevent software-related issues.

• Use Reliable Tools and Software

When using any tools or software on your device, ensure they’re trusted and well-reviewed. Unreliable tools can lead to unexpected problems.

• Avoid Unauthorized Modifications

Avoid messing with your device’s software beyond basic settings unless you’re a tech expert. Unauthorized modifications can lead to bricking.

• Keep Your Battery Charged

Ensure your device has enough battery power before initiating software updates or installations. Low battery during critical processes can lead to issues.

• Backup Regularly

Regularly back up your device’s data to avoid losing important information during a bricking incident.

• Use Official Firmware

If you’re ever reinstalling or updating your device’s software, always use official firmware provided by the manufacturer.

• Utilize Safe Mode for Troubleshooting

If your device starts acting strange, try booting it into safe mode. This helps you identify if a third-party app is causing issues.

• Seek Professional Help

If you’re unsure about a particular action, seek help from experts. Trying to fix complex issues yourself can worsen the situation.

By following these easy tips, you can keep your Tecno Spark 20 Pro+ device running smoothly and avoid the hassle of dealing with a bricked device. Always remember, prevention is better than cure!

safe & secure

Conclusion

Encountering a bricked Tecno Spark 20 Pro+ device can be a frustrating roadblock. However, there’s a silver lining – the power of an Android system repair software like Dr.Fone – System Repair (Android). This user-friendly tool acts as your device’s superhero, rescuing it from the clutches of bricking incidents.

So, whether your device is experiencing a soft brick or a hard brick, you now have the best tools and knowledge to overcome it. Dive into the Android system repair software world, explore your options, and bid farewell to brick. Welcome a revived, functioning Tecno Spark 20 Pro+ device into your daily life.

Why Your Tecno Spark 20 Pro+ Screen Might be Unresponsive and How to Fix It

This article aims to provide practical solutions for troubleshooting an unresponsive Tecno Spark 20 Pro+ screen. Whether you’re facing a software glitch or hardware damage, this guide will offer useful tips and tricks to help you resolve the issue and get your device back up and running smoothly.

5 Solutions to Solve Tecno Spark 20 Pro+ Screen Unresponsive Issues

An unresponsive Tecno Spark 20 Pro+ screen can be frustrating, but several potential solutions can help. This article will explore five methods for troubleshooting an unresponsive Tecno Spark 20 Pro+ screen. From force restarting your device to contacting customer service, we’ll cover everything you need to know to get your device back up and running.

1. Force Restart

If your Tecno Spark 20 Pro+ screen is unresponsive, the first thing to try is a force restart. This can help refresh the system and clear any temporary files causing the issue.

Step 1. Press and hold the power button on your Tecno Spark 20 Pro+ device.

Step 2. When the power options appear, tap “Restart.”

Step 3. Hold the power button if the screen is completely unresponsive until the Tecno Spark 20 Pro+ device shuts down. Then, press and hold the power button to turn the Tecno Spark 20 Pro+ device back on.

2. Drain the Battery Completely

If force restarting doesn’t work, let the battery drain completely. This can help reset the Tecno Spark 20 Pro+ device and clear any temporary files or processes causing the issue.

Step 1. Leave your Tecno Spark 20 Pro+ device on until the battery completely drains and the Tecno Spark 20 Pro+ device shuts down.

Step 2. Connect your device to a power source and turn it back on.

3. Check for Software Updates

Sometimes, an unresponsive Tecno Spark 20 Pro+ screen can be caused by outdated software. Checking for software updates ensures your device runs the latest and most stable operating system version.

Step 1. Go to “Settings“ on your Tecno Spark 20 Pro+ device.

Step 2. Scroll down and tap “Software Updates.”

Step 3. If an update is available, tap “Download and Install.”

4. Using Dr. Fone Repair

Dr. Fone Repair is a professional tool that can help fix a wide range of software issues on your Tecno Spark 20 Pro+ device. Dr. Fone Repair can be a good option to protect your data and files while troubleshooting an unresponsive Tecno Spark 20 Pro+ screen.

safe & secure

Step 1. Download and install Dr. Fone Repair software on your computer.

Step 2. Connect your Tecno Spark 20 Pro+ phone to your computer using a USB cable.

Step 3. Launch Dr. Fone Repair and select the “System Repair“ option.

Step 4. Choose the “Android Repair“ option from the available choices.

Step 5. Click on “Start“ to begin the repair process.

Step 6. Provide the necessary device information on the screen, including your name and model.

Step 7. Click “Next“ to proceed to the next step.

Step 8. Follow the on-screen instructions to complete the repair process for your Tecno Spark 20 Pro+ phone’s touchscreen.

Easy GIF Animator is a powerful animated GIF editor and the top tool for creating animated pictures, banners, buttons and GIF videos. You get extensive animation editing features, animation effects, unmatched image quality and optimization for the web. No other GIF animation software matches our features and ease of use, that’s why Easy GIF Animator is so popular.

5. Contact Customer Service


If none of the above solutions work, it may be time to contact Tecno Spark 20 Pro+ customer service. They can provide additional support and help troubleshoot the issue.

Step 1. Go to the Tecno Spark 20 Pro+ website and navigate to the “Support“ section.

Step 2. Select your device model and click “Contact Us.”

Step 3. Choose your preferred method of contact, such as phone or email, and describe the issue you’re experiencing.

Common Causes of Tecno Spark 20 Pro+ Screen Unresponsiveness

While Tecno Spark 20 Pro+ devices offer reliable performance, users may encounter situations where the screen becomes unresponsive or stuck on boot. Soft-bricked software or corrupted firmware can cause an Tecno Spark 20 Pro+ device to become unresponsive, including the screen stuck on the boot. This can happen to various models, such as the Tecno Spark 20 Pro+, A37, A5, and A5s. Software updates and resets can help fix these issues.

Over time, the touch screen of an Tecno Spark 20 Pro+ device may become unresponsive due to wear and tear. This can happen to models like the Tecno Spark 20 Pro+ F1s and F3. In this case, replacing the touch screen or seeking professional assistance may be necessary.

Dropping or impacting an Tecno Spark 20 Pro+ device can cause physical damage to the touch screen, resulting in unresponsiveness. This can happen to various models like the Tecno Spark 20 Pro+ Reno and Find X. In some cases, the damage may be repairable, but the screen replacement or the Tecno Spark 20 Pro+ device itself may be necessary in severe cases. Protecting the Tecno Spark 20 Pro+ device with a case and handling it carefully to prevent physical damage is important.

While Tecno Spark 20 Pro+ devices are generally reliable, various factors can contribute to screen unresponsiveness. Users can effectively troubleshoot and resolve issues by identifying these potential causes and seeking appropriate solutions.

How to Avoid Tecno Spark 20 Pro+ Screen Unresponsiveness Issue

One of the most effective ways to prevent Tecno Spark 20 Pro+ Screen unresponsiveness is by keeping the Tecno Spark 20 Pro+ device software up-to-date. Regularly checking for system updates and installing them promptly can prevent software issues and potential bugs that may cause unresponsiveness. Additionally, updating device apps can help prevent conflicts that affect the touch screen’s functionality.

Another way to avoid Tecno Spark 20 Pro+ Screen unresponsiveness is by protecting the Tecno Spark 20 Pro+ device from physical damage. Using a protective case or screen protector can help prevent cracks or scratches on the screen that can lead to unresponsiveness. Avoiding impacts or drops can also reduce the risk of physical damage to the touch screen.

Installing apps from unknown sources or suspicious websites can expose the Tecno Spark 20 Pro+ device to malware and viruses, which can cause unresponsiveness and other issues. To avoid this, it’s recommended to only install apps from trusted sources such as the Google Play Store or the Tecno Spark 20 Pro+ App Store.

Using a reliable tool like Dr. Fone can help prevent Tecno Spark 20 Pro+ Screen unresponsiveness by allowing you to manage and repair your device’s software and data. With features such as System Repair and Data Backup & Restore, you can quickly diagnose and fix software issues that may cause unresponsiveness and safely back up important data to prevent loss in case of device damage or malfunction.

Conclusion

Tecno Spark 20 Pro+ Screen unresponsiveness can be a frustrating issue to deal with, but there are solutions available. Force restarting the Tecno Spark 20 Pro+ device, checking for software updates, using Dr. Fone Repair, and contacting customer service are all effective ways to solve the problem. However, it’s also important to understand the possible causes of the issue, such as soft-bricking or equipment wearing out, and take preventative measures, such as updating your phone on time and avoiding malware. These tips can help prevent Tecno Spark 20 Pro+ Screen unresponsiveness and keep your device running smoothly.

safe & secure