Calls on Tecno Spark 10C Go Straight to Voicemail? 12 Fixes

Have you ever experienced incoming calls to your phone go straight to voicemail without ringing? It can be frustrating, especially if you’re expecting an important call. It could be due to simple things like turning down the volume or forgetting to turn off the Do Not Disturb mode. In other cases, it might be because you accidentally blocked the caller’s number.

In most cases, incoming calls going to voicemail without ringing are common. However, if it’s happening frequently or for all calls, your phone may have a problem.

This article will discuss why incoming phone calls go straight to voicemail and how to fix the problem. We’ll also show you how to use Wondershare Dr.Fone, a powerful Android System Repair tool, to solve such issues. So, if you’re uncertain why that last call went straight to voicemail, keep reading, and we’ll cover everything you need to know.

Part 1: Not Ringing? Here’s Why Calls on Your Phone Go Straight to Voicemail

If an incoming call to your cell phone goes straight to voicemail without ringing, there could be a few reasons. Here’s what to look for and what you should do to fix it:

Turn Off Do Not Disturb (DND) Mode

DND mode is a feature that silences all incoming calls, notifications, and alerts. If DND mode is enabled, your cell phone goes straight to voicemail when someone calls. To turn off DND mode, swipe down from the top of the screen to open the notification settings panel, then tap the Do not disturb icon.

Here’s an alternative way:

Step 1: Open the Settings app and go to Notifications.
Step 2: Tap Do not disturb.

Step 3: Toggle Do Not Disturb offto disable the mode.

Turn Off Call Forwarding

One reason calls go straight to voicemail without ringing is if you enabled call forwarding. Call forwarding is a feature that redirects incoming calls to another number. To turn off call forwarding:

Step 1: Open the Phone Dialer app on your device, then tap the menu icon and select Settings.

Step 2: Navigate to Supplementary services > Call forwarding.

Disable Call Barring

If a phone call went straight to voicemail, another possible explanation is the call barring. It is a feature that restricts calls from being made or received on your phone. If activated, it can cause incoming calls to a phone to go straight to voicemail. To turn off call barring on Tecno Spark 10C devices:

Step 1: Open the Phone Dialer app, then tap the menu icon in the top right corner.
Step 2: Go to Settings > Supplementary services > Call barring, then tap OK.
Step 3: Select Voice call, then turn off your preferred outgoing and incoming calls. When prompted, enter 0000 as a password.

Update Your Phone’s Software

Sometimes, software bugs can cause problems with incoming calls, which may be why your last incoming call went straight to voicemail. If your phone runs outdated software, try updating it to the latest version.

To check for updates, open the Settings app and go to Software update or System update. For a seamless update experience, follow the step-by-step instructions on your mobile screen.

Reset Network Settings

If the incoming calls on your phone go straight to voicemail, consider resetting your phone’s network settings. Network settings control how your phone connects to the cellular network. If these settings are not set up correctly, incoming calls may not be able to reach your device.

Note: Resetting your network settings will erase any saved Wi-Fi networks and Bluetooth pairings, requiring you to re-enter them after the reset is complete.

To reset your network settings on most Android devices:

Step 1: Open the Settings app on your smartphone, then tap System or General Management.
Step 2: Go to Reset > Reset Network Settings and confirm the action.

Turn Off Bluetooth

When Bluetooth is on, it can interfere with your device’s ability to receive calls, causing them to go straight to voicemail without ringing. To turn off Bluetooth on an Android device, you can do one of the following:

Swipe down from the top of the screen to open the Quick Settingspanel, then tap the Bluetooth icon to turn it off.

Go to Settings> Connections > Bluetooth and toggle the switch off.

It should help ensure that calls come through to your phone instead of going to voicemail.

Check Airplane Mode

If turning off Bluetooth didn’t solve the issue, another possible cause could be that your phone is in Airplane Mode. Airplane Mode turns off all wireless connections on your phone, including cellular service, which can cause calls to dial straight to voicemail. There are two ways to turn off Airplane mode on Android:

Using the Settings app:

Step 1: Open the Settings app.
Step 2: Tap Network & internet.
Step 3: Toggle off Airplane mode or Flight mode.

Using the Quick Settings panel:

Step 1: Swipe down from the top of the phone screen to access the Quick Settings panel.
Step 2: Look for the Airplane mode or Flight mode icon, then tap it to turn it off.

Check Blocked Numbers

“My boyfriend’s phone goes straight to voicemail when someone is calling. Any idea why that might be?”

Do you also find yourself asking what does it mean? It could be that he has blocked that phone number. To check this:

Step 1: Open the Phone dialer app.
Step 2: Tap the menu icon in the top right corner and select Settings.
Step 3: Tap Block numbers. If you find the number in the blocked list, remove it to ensure that their calls come through to the phone.

If you still have trouble reaching your boyfriend, try calling him from a different number. If your call didn’t go through, you know that he hasn’t blocked your number and that there may be another issue with his phone.

Turn Off Google One VPN

If you’re using Google One VPN, try turning it off to see if that fixes the problem. Some users have reported that Google One VPN can cause incoming calls to a phone to go straight to voicemail. To turn off Google One VPN:

Step 1: Open the Google One app on your Tecno Spark 10C.
Step 2: At the bottom, go to the Benefits tab, then tap View Details below the Online protection with a VPN section.

Step 3: Toggle off Enable VPN.

Contact Your Carrier

If your phone calls go straight to voicemail after trying all the above, contact your carrier for help. They may be able to troubleshoot the problem or determine if there is a service outage in your area.

And if your carrier confirms that there is no service outage or billing-related block, the problem may be with your phone itself. You may need to try resetting your phone to factory settings or taking it to a repair shop.

The Caller Used Ringless Voicemail

Ringless voicemail is a service that allows businesses to bypass your phone’s ringtone and send you pre-recorded messages directly to voicemail. Ringless voicemail is often used for marketing purposes. If you think you’re receiving ringless voicemail calls, you can contact the company calling you and ask them to remove you from their list.

Part 2: Not Clear About the Root Cause? Troubleshoot Directly by Wondershare Dr.Fone

If you’re unsure what’s causing your calls to go straight to voicemail, you can try using the Dr.Fone System Repair tool. This software can scan and repair your phone for any underlying problems, which may fix the issue and get your calls ringing again.

Dr.Fone supports over 1000 Android models, including unlocked Tecno Spark 10C models and models from carriers like AT&T and Vodafone. It has an intuitive interface and is easy to use, even for beginners. Learn below the steps on how to use Dr.Fone System Repair to fix incoming calls that dial straight to voicemail:

Step 1: Download Dr.Fone on your computer, then launch it once installed.

safe & secure

4,118,635 people have downloaded it

Step 2: Connect your smartphone to your desktop or computer using a USB cable. Next, from the Toolbox homepage, select System Repair.

Step 3: Select Android as the Tecno Spark 10C device type.

Step 4: Click Start to begin repairing your smartphone.

Step 5: Select the Tecno Spark 10C device details on the Name, Model, Country, and Carrier drop-down lists. Next, select the agreement checkbox, then click Next to proceed.

Step 6: Follow the in-app instructions to enter Download mode on your Tecno Spark 10C, then click Next.

Step 7: Wait while the app downloads the firmware; once done, click Fix Now.

Step 8: Enter the code in the input box to verify the Tecno Spark 10C device information in the dialogue box, then click Confirm.

Step 9: The app will start repairing the system issue on your Tecno Spark 10C. Once completed, your app should restart, then click Done to close the app.

You May Also Like:

Top 5 Best Android System Repair Apps

How to Fix It: Android Stuck on Boot Screen?

How to Flash Dead Android Phone Safely

Conclusion

When your phone calls go straight to voicemail without ringing, it can be a frustrating and disruptive experience. Not only do you miss important calls from work, friends, or family, but it also leaves you feeling disconnected and out of the loop. As a temporary measure to avoid missing important calls, check your voicemail regularly.

For a prompt solution, consider using Dr.Fone if incoming calls on your phone go straight to voicemail. It is a powerful mobile solution that can also address other system problems, including stuck boot loops, app crashes, black screens, and bricked devices. If you consistently experience this issue, it’s advisable to reach out to a professional for assistance.

Jutoh Plus - Jutoh is an ebook creator for Epub, Kindle and more. It’s fast, runs on Windows, Mac, and Linux, comes with a cover design editor, and allows book variations to be created with alternate text, style sheets and cover designs. Jutoh Plus adds scripting so you can automate ebook import and creation operations. It also allows customisation of ebook HTML via templates and source code documents; and you can create Windows CHM and wxWidgets HTB help files.

safe & secure

4,215,287 people have downloaded it

Guide: How To Unbrick a Bricked Tecno Spark 10C Phone

Tecno Spark 10C phones are super popular thanks to their excellent features and affordable prices. But being so popular means people try to customize them with custom software. If you’re not careful, you might have a “bricked” Tecno Spark 10C phone. It won’t work at all. It will be more like a brick than a smartphone.

Don’t worry, though. This guide is here to help. It will show you how to unbrick your phone step by step. You’ll learn to bring your phone back to life and make it work again. So, get started on fixing your bricked Tecno Spark 10C phone by reading this article.

Part 1. Common Reasons Why Tecno Spark 10C Phones Get Bricked

A bricked phone might sound like a techy term, but it’s pretty simple – when your Tecno Spark 10C phone turns into a lifeless block that won’t do anything. In this section, you’ll learn all about why this happens, so you can avoid these issues and keep your phone alive as long as possible.

Trying to flash incompatible ROMs. Sometimes, people want their Tecno Spark 10C phones to run different software like a custom version of Android called a ROM. But if you use the correct ROM for your specific phone, it can mess things up nicely. Also, inexperience with ROM flashing can hard brickyour Tecno Spark 10C Be sure to follow guides and ask for community help online.
Rooting mishaps/failures.“Rooting” means giving your phone superpowers, but if you mess up, it can go wrong. Your phone might not boot up, leaving you with a brick. Like the previous bullet, follow guides carefully, especially if inexperienced.
Failed Firmware Updates. When your phone asks you to update its software, following the instructions carefully is essential. If you interrupt the process or something goes wrong, your phone could be bricked.

Now, you must know about soft and hard-bricking to learn how to diagnose your phone. Soft bricking is like a phone’s bad day – it might not start up. However, with the right help, you can fix it. Hard bricking is worse. It’s when your phone is a paperweight – it won’t turn on, respond, or do anything useful.

Part 2. Method 1: Use the Tecno Spark 10C Flash Tool To Recover Bricked Tecno Spark 10C Phones

Say you’ve accidentally bricked your Tecno Spark 10C phone due to rooting or ROM flashing. You might feel scared, but imagine having a magic wand that can fix your bricked phone. That’s what the Tecno Spark 10C Flash Tool is –a dedicated Tecno Spark 10C unbricking tool. It lets you install or flash different software onto your phone, giving it a fresh start. Most of the time, a simple firmware flash will unbrick your Tecno Spark 10C.

The Tecno Spark 10C Flash Tool is a superhero for various situations. Here are some scenarios where it can save the day:

**Device Recovery.**If your phone is bricked or acting strange, the Flash Tool can help bring it back to life.
Firmware Updates. You can use it to install official updates released by Tecno Spark 10C, ensuring your phone runs smoothly.
**Device Customization.**Want a different look for your phone? The Flash Tool can help you install custom ROMs or themes.
**Bug Fixes.**Got pesky bugs or glitches? The Flash Tool can replace corrupted software to make your phone behave.
Performance Enhancement. If your phone feels sluggish, the Flash Tool can boost its speed by flashing a new OS.

How To Use the Tecno Spark 10C Flash Tool To Unbrick a Tecno Spark 10C Phone

Now that you know what the Tecno Spark 10C Flash Tool is all about, it’s time to learn how to use it. If you’ve bricked your Tecno Spark 10C phone, follow the steps below:

Step 1. Download the Tecno Spark 10C Flash Tool and the stock firmware of your device on your computer.
Step 2. Turn off your phone. Then, press and hold the Volume Down + Power Key simultaneously for 6-8 seconds. This will force your phone to enter the Fastboot mode.

PearlMountain Image Converter

Step 3. Connect your phone to your computer using a cable when you see this screen flash.

Step 4. Using the Tecno Spark 10C Flash Tool, click Select. Then, locate the firmware files you downloaded earlier.

dotConnect for Oracle is an ADO.NET data provider for Oracle with Entity Framework Support.

Step 5. Click the refresh button until the flash tool recognizes your device. Then, click flash to replace the firmware. A text saying “success” should appear under the result column.

Congratulations! Your phone should be up and working after following these steps.

Part 3. Method 2: Wondershare Dr.Fone System Repair – Your One-Stop Shop for Unbricking Your Tecno Spark 10C Phone

If you gave the Tecno Spark 10C Flash Tool a shot and your phone is still not cooperating, don’t lose hope. Sometimes, the magic touch needs a slight variation. That’s where Dr.Fone comes into play. This dedicated software can work wonders when fixing various phone problems. It can even help in cases of bricked Tecno Spark 10C phones involving software or firmware issues.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

Fix your Android to normal, no skills required.
Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
The high success rate in resolving Android system issues.
Compatible with a wide range of Android devices and OS versions
User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

One of Dr.Fone’s most astonishing powers is its “System Repair” feature. This is where the real magic happens. If your Tecno Spark 10C phone is bricked, it can help repair the underlying software glitches that caused the issue. Moreover, Dr.Fone brings a toolbox of features to the table, making it more than just a one-trick pony. Here are its key features:

**Data Recovery:**If you’ve lost precious data, Dr.Fone can help recover it, even from a bricked phone.
**Data Transfer:**You can quickly move data between devices, even if one is unresponsive.
**System Backup & Restore:**Fone can help you create a backup of your phone’s system and restore it when needed.
**Unlocking Tools:**If you’re locked out of your phone, Dr.Fone can help you regain access.

How To Use Dr.Fone System Recovery Feature To Unbrick a Tecno Spark 10C Phone

Now that you know about Dr.Fone, it’s time to understand how to use it. Hopefully, it can save your bricked Tecno Spark 10C phone from its problems. Follow the steps below:

Step 1. DownloadDr.Fone from its official website , and launch it on your computer. After entering the Toolbox menu from the left panel, click System Repair. Make sure that your Tecno Spark 10C phone is connected.
Step 2. Select Android on the next screen.

Step 3. Initiate the Android System Repair by clicking Start.

Step 4. Confirm your device details. You can edit any details that might be wrong.

FX PRO (Gold Robot + Silver Robot(Basic Package))

Step 5. Put your phone into Download mode. Follow the guidelines for phones with or without home buttons. Your phone will begin downloading the dedicated firmware.

Step 6. After downloading the firmware, verify and proceed with the installation by clicking Fix Now. Confirm firmware installation by typing “000000” into the text box in the appearing window. Click Confirm afterward.

Step 7. After the process is finished, your phone should now be okay. Click Done.

Part 4. Best Practices/Tips Before Unbricking Your Phone

Before diving into the unbricking process, you must arm yourself with some tips and precautions to ensure your recovery journey is as smooth as possible. Here’s what you need to know:

Backing Up Data: An Ounce of Prevention. Remember the golden rule: always back up your data before attempting any phone recovery. Unbricking might save your phone, but being safe is better than sorry.
**Authentic Tools and Software: Stay on the Safe Side.**Using genuine and trustworthy tools is crucial when unbricking your Tecno Spark 10C This applies especially to Dr.Fone, which you should only download from the official website. Additionally, when recovering your phone’s software, use authentic Tecno Spark 10C ROMs (the operating system’s files).
**Learning from Online Guides and Communities: Seek Guidance.**Navigating the unbricking process might seem daunting, but you’re not alone. There are many online guides, tutorials, and communities where people share their experiences and solutions.

Conclusion

So, there you have it – your guide to fixing a bricked Tecno Spark 10C phone. Remember, bricking happens when your phone stops working. You won’t be afraid when that happens, as you learned about the Tecno Spark 10C Flash Tool and Dr.Fone. They are your phone-saving superheroes that can unbrick even a hard-bricked Tecno Spark 10C phone.

As a parting reminder, always keep a tool ready for emergencies. For this, choose Dr.Fone. It’s a super tool for all your phone problems. Give it a shot and be confident with your phone wherever you go and whatever you do with it.

safe & secure

3,052,835 people have downloaded it

Want to Uninstall Google Play Service from Tecno Spark 10C? Here is How

In this article, you will learn the pros and cons of uninstalling Google Play services, as well as a free root tool to help you do this.

Acts as a one-stop destination to download various kinds of apps from the Play Store. The Play service also provides a way to manage these apps without much hassle. From uninstalling to updating an app, all of this can be done with Google Play service. Nevertheless, there are times when users wish to uninstall Google Play services. To start with, it takes a lot of storage and makes it pretty tough for users to manage their devices. To help you, we will let you know how to uninstall Google Play Store in this informative post.

The Tube Sites Submitter is a fast and efficient tool for anyone who needs to upload videos quickly, easily and automatically to hundreds of tube sites in mere minutes .

Part 1: Reason you might want to get rid of Google Play Service

Before we proceed and discuss different ways on how to update Play Store after uninstalling updates, it is important to cover the basics. We have heard plenty of users who wish to uninstall Google Play services, but are not sure of the repercussions. One of the main reasons is that it consumes a lot of space on phone’s storage. Not just that, it only consumes plenty of battery as well.

If your device is giving the insufficient storage warning, then you need to start by clearing your phone’s data. It is observed that the Google Play Service accumulates most of the data in a device. This leads to users looking for different ways to how to uninstall Google Play Store.

Part 2: What will it affect to uninstall Google Play Service?

If you think that Google Play Service only provides a platform to download new apps, then you are wrong. It provides several other functions that might alter the way you use your smartphone. It is linked with other essential Google services as well, like Google Maps, Gmail, Google Music, etc. After uninstalling the Google Play Service, you might face trouble using various essential apps.

Furthermore, it might tamper with the overall functionality of your device as well. For instance, you could encounter network issues, messaging problems, app crashing, and more. Since the Play Service is closely associated with Android system, it might have a prominent effect on your phone. If you have a rooted device, then you can easily install custom ROM and resolve these issues. Though, for a non-rooted device, overcoming these problems could be a big hurdle.

Part 3: How to disable Google Play Service?

By now, you already know all the repercussions of getting rid of Google Play Services permanently. Before you learn how to update Play Store after uninstalling updates, be sure whether you wish to uninstall Google Play Services or not. You can also choose to simply disable the services as well. If you face any severe issue afterward, then you can always enable the services manually.

To disable the Google Play Services, just go to your phone’s Settings > Applications > All and open Google Play Services. You will get to know about the app’s detail and a few other options here. Just tap on the “Disable” button. It will generate another pop-up message. Confirm it by tapping on the “Ok” button. This will disable Google Play Services on your device. Later, you can follow the same drill to enable it as well.

Now when you know how to uninstall Google Play Store on your device, you can easily customize it. Get rid of any kind of problem you are facing due to lack of storage or battery issues related to Google Play services after following these instructions. Feel free to drop a comment below if you face any setback while following this tutorial.

HowTo

Calls on Tecno Spark 10C Go Straight to Voicemail? 12 Fixes | Dr.fone