Cellular Network Not Available for Voice Calls On Itel A05s

The “Cellular Network Not Available for Voice Calls“ error is a common experience for many Android users. In our contemporary world, communication stands as the fundamental pillar of our existence. Yet, the malfunctioning of our devices hinders this connectivity. It often gives rise to numerous complications. Fortunately, your concerns are now a thing of the past.

This article serves as your guide for troubleshooting and overcoming this frustrating dilemma. It has compiled expert perspectives, valuable tips, and detailed, systematic solutions. The article will go through the underlying causes behind this issue and explore potential fixes. By the conclusion of this article, you’ll be armed with the necessary knowledge to tackle this problem.

Part 1. Preliminary Reasons For Cellular Network Not Available For Voice Calls

Facing the “Cellular Network Not Available for Voice Calls Android“ error can be overwhelming. Thus, it becomes evident that specific reasons underlie this issue. Solutions indeed exist to tackle this problem. Yet, comprehending the underlying reasons is equally crucial to resolve the issue:

1. Internet Access

One primary reason behind cellular network unavailability glitches lies in unstable internet access. Voice calls over cellular networks often require a stable internet connection. When this connection fluctuates or drops, it can result in the dreaded error message.

2. Terrain Coverage

Another contributing factor is the geographical terrain. In remote or sparsely populated areas, cellular tower coverage might be limited. It causes a signal disturbance or complete loss of the network.

3. Network Congestion

During peak usage hours or in densely populated areas, network congestion can also be a cause. It leads to temporary unavailability of the cellular network for voice calls. When the network is overloaded with traffic, it might struggle to accommodate more voice calls. That results in connectivity issues.

4. Technical Glitches

Furthermore, technical glitches within the Itel A05s device or network infrastructure can cause this issue. These glitches could range from software bugs to hardware malfunctions.

5. Battery or Power Issues

In some instances, insufficient battery power or power-saving modes on devices can cause this issue. They affect the Itel A05s device’s capacity to sustain a consistent connection with the cellular network. This consequently causes voice call unavailability.

Part 2. Prominent Solutions For Cellular Network Not Available For Voice Calls Android

A myriad of purposeful solutions exists to resolve the TracFone cellular network not available for voice calls issue. These solutions are specifically designed to address various underlying causes. The aim of these solutions is to restore smooth connectivity for voice calls. Described below are the top 8 solutions to fix the “Cellular Network Not Available” error:

Method	Efficiency	Difficulty	Duration (Minutes)
Check Network Availability	Moderate	Easy	5-10
Check Airplane Mode	Low	Easy	2-5
Select Network Operator	Moderate	Moderate	5-10
Restart Device	Low to Moderate	Easy	3-5
Enable Roaming Settings	Moderate	Easy	3-7
Update Android Smartphone	Moderate	Moderate	15-30
Performing Factory Reset	High (Last Resort)	Difficult	30-60+
Contact Carrier Provider	High (Specialized Help)	Moderate	Varies (Depends on Carrier Provider)
Wondershare Dr.Fone - System Repair	Highest (Complex Issues)	Easiest	5-10

Solution 1. Check the Availability of Cellular Networks

Before diving into complex fixes, the first thing to do is to check if nearby cell networks are available and how strong their signals are. It is an essential step when trying to fix the “Cellular Network Not Available“ error. This basic check ensures your phone is close enough to a working network tower, which matters for staying connected. It allows you to find out the availability of nearby cellular networks.

Moreover, with it, you can ensure your device is connected to a reliable network. This preliminary check sets the foundation for further troubleshooting.

Solution 2. Check the Airplane Mode of the Smartphone

Another crucial step in resolving this error involves ensuring that the Airplane Mode is disabled. This mode, when activated, disables all wireless connections. It also includes cellular networks, which could lead to connectivity issues. Follow these simple steps to check and disable Airplane Mode on your device:

Instructions: Swipe down on your phone’s screen from the top to access the Notification Panel, unveiling the Quick Settings tiles. Search for the airplane-shaped icon; if Airplane Mode is active, the icon will be highlighted or shown in a distinct color. Tap the Airplane Mode to turn off the Airplane Mode on your Android.

Solution 3. Selecting the Network Operator of the Itel A05s device

In certain instances, manually selecting your network operator can help. It effectively resolves the “Cellular Network Not Available for Voice Calls Android“ error on your Itel A05s. By choosing the network operator manually, you ensure a deliberate connection to a specific carrier. This potentially bypasses issues related to automatic network selection. Follow these steps to select your network operator manually:

• Step 1. Access “Settings” on your Itel A05s, then tap on “Connections.” From there, navigate to “Mobile Networks” and proceed by selecting “Network Operators.”

• Step 2. Look for the “Automatically Select” toggle, which will be turned on. Toggle it off to see available networks and choose the one best suited to your device.

Solution 4. Restart Your Device

Sometimes, resolving the “Cellular Network Not Available for Voice Calls“ error on your Itel A05s can be as simple as performing a restart. This basic troubleshooting step helps refresh the Itel A05s device’s software. It clears temporary glitches and reestablishes essential connections, potentially resolving network-related issues. Follow these straightforward steps to restart your Itel A05s:

Instructions: Hold down the “Power” button until the Power menu emerges on the display. From there, select “Restart” to initiate the Itel A05s device’s reboot process.

Solution 5. Enable Roaming Settings

There are situations where you’re in an area with weak or no coverage from your primary network provider. In such a case, enabling roaming settings on your Itel A05s can sometimes resolve the issue at hand. Enabling roaming allows your device to connect to partner networks. This extends your coverage beyond your home network’s reach. Follow these steps to enable roaming settings on your Itel A05s:

• Step 1. Start by accessing your device’s Settings and tapping the “Connections” option. Here, scroll downward to press “Mobile Networks.”

• Step 2. Presently, you will encounter the “Data Roaming” option. Toggle this option on to enable data roaming on your device and resolve the issue.

Solution 6. Update Android Smartphone

Updating your Itel A05s’s OS to the latest version can often resolve performance issues. It can also fix network connectivity issues, including the “Cellular Network Not Available” error. Manufacturers regularly release system updates containing bug fixes and security patches. It also includes enhancements that can address underlying software-related problems. Follow these steps to update your Android smartphone:

• Step 1. In your device’s Settings, scroll through to find the “Software Update” option. Select it, and on the subsequent screen, verify the availability of any updates.

• Step 2. If an update is accessible, select the ‘Download and Install’ choice. Then, proceed by following the prompts displayed on the screen to finalize the process.

Solution 7. Performing Factory Reset

Performing a factory reset is a drastic but effective measure. It can resolve persistent software-related issues, including the “Cellular Network Not Available” error. Be aware that initiating a factory reset results in the deletion of all data and settings stored on your device. Hence, it is crucial to back up any vital information before proceeding with this action. Here is how to fix the Verizon cellular network not available for voice calls:

• Step 1. To access your device’s “General Management” section, navigate through Settings. There, tap on “Reset,” and select “Factory Data Reset” from the subsequent screen.

• Step 2. You will need to tap “Reset” to confirm your choice. Then, follow the on-screen guidelines carefully to complete the reset process.

Solution 8. Contact Carrier Provider

If you’ve exhausted all options and the issue persists, reaching out to your carrier provider for assistance is a viable solution. Carrier providers can offer specific insights and guidance regarding network-related issues. When connected to customer service, explain the issue you’re experiencing in detail. Contacting your carrier provider enables you to tap into their expertise and resources.

You May Also Like:

Top 5 DFU Tools for iPhone to Enter DFU Mode

9 Ways to Fix iPhone Error 4013 or iTunes Error 4013

Itel A05s ROM Download & Install: The Definitive Guide

Part 3. [100% Resolvable] Resolve Cellular Network Not Available For Calls Issues

Despite all your attempts, the cellular network not available for voice calls remains unresolved. It might state a more complex software-related issue or glitch within the Itel A05s device. However, there’s a solution designed explicitly for addressing such complex issues. That software is Wondershare Dr.Fone, a comprehensive toolkit for Android devices. It stands out as the world’s first one-click Android repair tool.

Dr.Fone specializes in resolving a wide array of Android system issues, including the notorious black screen of death. With this tool, users can effortlessly restore their Android system to normal functionality.

Key Features of Wondershare Dr.Fone

1. Fone’s advanced repairing mechanism has the ability to repair even the bricked Android devices.
2. This tool supports more than 1000 models of Android devices across different brands for system repair.
3. It boasts the highest success rate when it comes to fixing Android devices.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

Steps Needed To Fix the Cellular Network Not Available for Calls Issue via Wondershare Dr.Fone

The following are the steps to resolve the Tracfone cellular network not available for voice calls using Wondershare Dr.Fone:

• Step 1. Open Wondershare Dr.Fone and Opt for System Repair

Launch the software. Then, navigate to the “Toolbox” section located in the left panel. Connect your Itel A05s and proceed by choosing “System Repair.” Then, opt for “Android” to specify the Itel A05s device type. On the subsequent screen, click “Start” to commence the repair procedure.

• Step 2. Provide Details of Your Android Device

The system automatically identifies the brand of the Android device undergoing repair. Afterward, choose the “Name,” “Model,” “Country,” and “Carrier” from the provided list options. If the Itel A05s device is already unlocked, you can choose OPEN in the Carrier section. Then, confirm by checking the warning box indicating agreement and readiness to proceed. Click on “Next” to initiate the repair process for your Itel A05s.

• Step 3. Complete the Android Repair Process Successfully

Follow the guidance displayed on your device’s screen to access Download Mode. Once in, the firmware download begins automatically. During this process, the platform verifies and presents the firmware details. Select “Fix Now” to proceed with the installation of the firmware onto your Itel A05s. Since Android repair will result in the deletion of all data, input “000000” to confirm. This action initiates the system repair process.

safe & secure

3,336,459 people have downloaded it

Conclusion

In conclusion, facing the “Cellular Network Not Available for Voice Calls“ problem on your Itel A05s can be frustrating. This article has explored many ways to fix this issue. These include simple checks like turning off Airplane Mode to solutions like contacting your carrier. However, when facing persistent network problems, a tool like Wondershare Dr.Fone becomes the only hope.

Among the various methods discussed, Dr.Fone stands out as a top choice. Its thorough system repair function targets and removes complex software glitches. The tool’s easy interface, broad compatibility, and secure repair process make it perfect. It is ideal for users looking for a reliable solution beyond regular troubleshooting.

Why isn’t My Itel A05s establishing a connection with the cellular network?

What steps can I take when the mobile network isn’t available?

What might be causing my SIM card to not display a network?

Troubleshooting Guide: How to Fix an Unresponsive Itel A05s Screen

Smart devices have become an integral part of our lives, and Itel A05s phones are increasingly popular due to their advanced features and affordable prices. These phones offer numerous benefits, including high-quality cameras, fast processors, long-lasting batteries, and sleek designs.

However, like any other electronic device, Itel A05s phones can sometimes encounter issues that may impede their functionality. One common problem that users face is an unresponsive screen, which can be frustrating and disruptive to daily activities.

This article will discuss some valuable solutions for dealing with Itel A05s phone screen unresponsiveness. We will provide step-by-step instructions for troubleshooting and getting your phone back in working order. Whether you’re a novice or an experienced user, these tips and tricks will help you navigate this problem and get back to using your phone without any issues. So, let’s dive in and explore how to fix a Itel A05s phone with an unresponsive screen.

What causes the Itel A05s Screen unresponsive?

The Itel A05s screen may become unresponsive due to various reasons. Here are some common situations and their possible causes:

• During Use/Gaming: The screen may become unresponsive due to overheating when using or gaming on a Itel A05s phone. This can be caused by running too many apps simultaneously or playing games for an extended period, especially on models such as the Itel A05s 9 Pro, which generates much heat during gaming.

• **No Response When Touching the Screen:**Sometimes, the Itel A05s screen may not respond when touched due to a faulty touch screen or display. This can happen due to physical damage or a manufacturing defect. Some Itel A05s Nord 2 users have reported this issue.

• After Dropping the Phone: If a Itel A05s phone has been dropped, the screen may become unresponsive due to physical damage or a loose connection. This can happen to any model, including the Itel A05s.

Overheating, physical damage, and manufacturing defects are some common causes of Itel A05s screen unresponsiveness, which may occur during use/gaming, no response when touching the screen, or after dropping the phone.

The common solutions to solve a Itel A05s Screen unresponsive

Here are the three most common solutions to deal with phone screens being unresponsive, regardless of the brand:

Restart the Itel A05s device

Restarting the Itel A05s device is a simple and quick solution to an unresponsive phone screen. To restart the phone, press and hold the power button until the screen turns off, then press and hold the power button again to turn the phone back on.

Check the Charging Port and Battery

Sometimes, an unresponsive screen can be caused by a dead battery or a faulty charging port. To check for these issues:

Step 1: Plug the phone into a charger and wait for at least 30 minutes to see if the battery charges.

Step 2: Try a different charger or cable to see if the issue is with the charging accessories.

Contact the Pros

If the above solutions don’t work, contacting a professional is best. A trained technician can diagnose and fix the problem. Contact the phone manufacturer or an authorized repair center to get help with your phone.

For different Itel A05s models, there may be additional solutions to consider:

Check the Phone’s Temperature

Sometimes, a Itel A05s phone’s screen, specifically Itel A05s 8 Pro, may become unresponsive due to overheating. To check the phone’s temperature:

Step 1: Go to Settings > Battery > Battery Temperature.

Step 2: If the phone is overheating, let it cool down before using it again.

Reset to Factory Settings

A factory reset may help fix the problem if none of the above solutions work. Note that this will erase all data and settings on the phone, so be sure to back up your data before resetting. To reset the phone:

Step 1: Go to Settings > Additional Settings > Backup and Reset > Erase All Data.

Step 2: Follow the on-screen instructions to reset the phone.

Replace a New Screen

If the phone’s screen is physically damaged or cracked, it may need to be replaced. To replace the screen:

• Contact a professional repair center or the manufacturer for replacement parts and installation.

How to avoid Itel A05s Screen being unresponsive?

To avoid Itel A05s screen being unresponsive, here are some suggestions based on the possible causes:

Check Software Updates on Time

Make sure to regularly check for and install software updates on your Itel A05s phone. These updates often include bug fixes and security patches that can help prevent issues like overheating and screen unresponsiveness.

Check Hardware from Time to Time

Regularly inspect your phone’s hardware components such as charging ports, battery, and screen for any signs of damage or wear and tear. If you notice any issues, get them fixed promptly to prevent them from causing further damage.

Avoid extreme temperatures

Keep your Itel A05s device in a temperature-controlled environment. High temperatures can cause the screen to become unresponsive, and low temperatures can cause it to freeze.

Keep the screen clean

Dirt and debris on the screen can cause it to become unresponsive. Use a microfiber cloth to clean the screen regularly.

Reduce the number of running apps

Running too many apps at once can overload the system and cause the screen to become unresponsive. Close any apps you’re not using to free up system resources.

Use Wondershare Dr.Fone to Repair or Manage Your Data

Wondershare Dr.Fone is a helpful tool that can help manage and repair your phone’s data. It can be used to back up your data, transfer files between devices, and even fix issues like an unresponsive screen. Dr.Fone has the DF13 version to be launched, which includes more features to help manage your phone’s data effectively.

By following these suggestions, you can help prevent screen unresponsiveness on your Itel A05s phone. Download Dr.Fone at https://drfone.wondershare.com/ to manage your phone’s data effectively and fix any issues that may arise.

safe & secure

Conclusion

Itel A05s phones offer numerous benefits, including high-quality cameras, fast processors, long-lasting batteries, and sleek designs. However, like any other electronic device, Itel A05s phones can sometimes encounter issues, such as an unresponsive screen. The causes of an unresponsive screen may include overheating, physical damage, and manufacturing defects.

To deal with an unresponsive screen, users can try restarting the Itel A05s device, checking the charging port and battery, or contacting a professional. Additional solutions for specific Itel A05s models include checking the phone’s temperature, resetting to factory settings, or replacing a new screen. To avoid an unresponsive screen, users can check software updates on time, inspect the phone’s hardware, avoid extreme temperatures, keep the screen clean, and reduce the number of running apps. Dr.Fone is a helpful tool that can help manage and repair your phone’s data.

Full Guide: How To Fix Connection Is Not Private on Itel A05s

Are you encountering the “your connection is not private” issue on your phone? We found many Android users have increasingly expressed their frustrations with this recurring problem while browsing on the internet.

Usually, you can just reload the page to fix the error. But in case it doesn’t help, you may need to look for more advanced solutions. In the following discussion, we will delve into why this “your connection is not private” on Android happens and explore solutions that work for you.

Part 1: Addressing Your Connection Is Not Private on Android

First of all, what does “your connection is not private” on Android mean? To answer this question, it’s essential to understand that this error is often associated with Secure Socket Layer (SSL) protocol issues.

SSL is a cryptographic protocol created to establish a secure communication channel over the internet. Its primary purpose is to ensure the confidentiality and integrity of data exchanged between a user’s device and a website’s server.

The error message appears when there’s a problem with the SSL/TLS (Transport Layer Security) certificate of the website you are trying to access. This certificate is a digital document that authenticates the website and encrypts the data transmitted between the user’s device and the server.

Some common factors that could trigger the “your connection is not private” on Chrome Android error:

1. Expired or invalid SSL certificate of the website;

Certificates are issued for a specific period, and if the website owner fails to renew it in time, your browser will detect it as not secure.

2. There is a mismatch between the domain on the certificate and the actual domain you are trying to visit;

This discrepancy might occur due to a misconfiguration on the website or, in some cases, due to a man-in-the-middle attack where a third party intercepts the communication between your device and the server.

3. No HTTPS enforcement;

Another reason for the issue is if the installed SSL certificate doesn’t turn on the “force HTTPS” option. This means visitors might be using the non-secure HTTP version of the site instead of the safe URL.

So, the error serves as a warning to users, indicating that the connection may not be secure and sensitive information could be at risk.

Browsers, including those on Android devices, prioritize user safety and privacy. They will block access to potentially compromised websites to prevent data theft or unauthorized access. That’s why when you get the “your connection is not private” message on Android, you can’t access the website.

Part 2: What The Error Codes in “Your Connection Is Not Private” Mean

When “your connection is not private” on Chrome Android error shows up, it often comes along with specific error codes that can indicate the root cause of the issue. Understanding these error codes is crucial for troubleshooting and resolving the problem effectively.

1. ERR_CERT_SYMANTEC_LEGACY: Unsupported Symantec-issued certificate

This error code indicates that the website you are attempting to access is equipped with an unsupported Symantec-issued certificate. Symantec, a prominent Certificate Authority, had faced concerns about the security of its certificate issuance processes.

As a result, major browsers, including Google Chrome, no longer support certificates issued by Symantec. If you encounter this error, it implies that the website’s SSL certificate is outdated and needs to be updated with a certificate from a trusted Certificate Authority.

2. NET::ERR_CERT_AUTHORITY_INVALID: Unauthenticated SSL certificate

The presence of this error code suggests that the SSL certificate of the website cannot be authenticated by your browser. This could occur if the certificate is self-signed or issued by an unrecognized Certificate Authority.

3. NET::ERR_CERT_DATE_INVALID: Date and time mismatch

This error code points to a discrepancy between your Itel A05s’s date and time settings and the information on the website’s SSL certificate, as they have expiration dates. If the date and time settings on your device are incorrect, it may prevent the certificate from being validated. Correcting your device’s date and time settings should resolve this issue.

4. SSL certificate error: Generic or unspecified problem

This is a more generic error message that indicates a problem with the website’s SSL certificate without specifying the exact nature of the issue. It could indicate various issues, such as an expired certificate, a misconfiguration in the certificate chain, or other SSL-related problems.

Part 3: How To Fix Your Connection Is Not Private on Android

Encountering the “your connection is not private” error on Android can be a frustrating experience. Fortunately, there are various methods to address and fix this issue, depending on its underlying cause.

In this section, we will explore some effective solutions to help you regain a secure and private connection.

Method 1: Clear your cache

When you use the internet, web browsers store information about your online activities in cached data and cookies to speed things up. However, having too much of this data can cause problems instead. It might even stop your browser from connecting securely.

So, clearing your browser cache and data can be a quick and simple “your connection is not private” Android fix. Follow the steps here:

• Step 1: Open and launch Chrome.
• Step 2: Access the Menu (the three dots button) to open the Settings. Select Privacy and Security > Clear Browsing Data.
• Step 3: Opt for the “All Time” option and click “Clear Data” to erase your cache.

After successfully clearing your browser cache and data, revisit the website to check if the problem persists.

Method 2: Repair the Android system

Addressing the “your connection is not private” to fix on Android involves examining both the Itel A05s device and the website. If clearing browser data doesn’t help, there might be an issue with your Android system. One solution is to use the Wondershare Dr.Fone system repair tool to fix the issues safely.

How to perform system repair with Dr.Fone:

• Step 1. Open the Repair Tool

Start by launching Wondershare Dr.Fone on your computer. Go to the Toolbox section and connect your Itel A05s. Choose System Repair and pick Android as your device type.

safe & secure

4,322,863 people have downloaded it

• Step 2. Begin Repair

Click Start on the new screen to kick off the repair. Since you’re dealing with a connection private issue on Android, select System Damage.

• Step 3. Fill in the Itel A05s device Details

The platform will detect your Itel A05s’s brand. Confirm the Name, Model, Country, and Carrier. If your device is unlocked, choose OPEN in the Carrier section. Agree to the warning, click Next, and proceed with the repair.

• Step 4. Activate Download Mode

Follow the instructions to put your Itel A05s into Download Mode. Once in Download Mode, you will start downloading the firmware.

• Step 5. Confirm Installation

Remember, the repair may erase data. It’s advisable to back up your data first before starting the repair. Enter “000000” to confirm the repair process, shown by a progress bar.

When done, click Done if your Android starts properly. If not, click Try Again to repeat the process.

Method 3: Check and fix the date and time on your Android

Since the error code “NET::ERR_CERT_DATE_INVALID” indicates a mismatch between the date and time on your device and your browser, you need to adjust the date and time settings on your Android to fix it.

The specific steps can vary based on your Android model, but the general approach involves locating the “date and time” settings on your phone. How to fix the date and time on Android to bypass “your connection is not private” on Chrome Android:

• Step 1: Go to your Itel A05s’s Settings > Date & Time.
• Step 2: Switch on the “Automatic Date & Time” to sync with the network-provided time.

Method 4: Perform factory reset

If nothing else works, there might be malware on your phone causing trouble. It’s crucial to eliminate this threat before further damage occurs. The recommended action is to perform a factory reset on your phone.

However, keep in mind that this process can result in data loss, so it’s essential to back up your data beforehand. Follow the steps to perform a factory reset on Android:

• Step 1: Go to your Android Settings.
• Step 2: Select Backup and Reset > Factory data reset. Then, opt to erase all data.

Most of the time, you won’t need to go to the extreme of a factory reset. The simpler solutions mentioned earlier should take care of the Security Certificate Error on your Android.

Conclusion

By now, you should have a good grasp of the “Your Connection Is Not Private” problem on Android. This issue typically arises from complications with the SSL certificate of the website, designed to ensure a secure connection.

When you see the error message, it often comes with specific codes that indicate the underlying problem. Several methods can be employed to fix the “Your Connection Is Not Private” on Android. Clearing the browser cache, repairing the Android system using tools like Dr.Fone, checking and fixing date and time settings, and performing a factory reset as a last resort are among the solutions.

By prioritizing user safety and following the step-by-step approach in this guide, you can navigate and resolve this common internet browsing challenge on your Itel A05ss.