Cellular Network Not Available for Voice Calls On Tecno Spark 10 5G

The “Cellular Network Not Available for Voice Calls“ error is a common experience for many Android users. In our contemporary world, communication stands as the fundamental pillar of our existence. Yet, the malfunctioning of our devices hinders this connectivity. It often gives rise to numerous complications. Fortunately, your concerns are now a thing of the past.

This article serves as your guide for troubleshooting and overcoming this frustrating dilemma. It has compiled expert perspectives, valuable tips, and detailed, systematic solutions. The article will go through the underlying causes behind this issue and explore potential fixes. By the conclusion of this article, you’ll be armed with the necessary knowledge to tackle this problem.

Part 1. Preliminary Reasons For Cellular Network Not Available For Voice Calls

Facing the “Cellular Network Not Available for Voice Calls Android“ error can be overwhelming. Thus, it becomes evident that specific reasons underlie this issue. Solutions indeed exist to tackle this problem. Yet, comprehending the underlying reasons is equally crucial to resolve the issue:

1. Internet Access

One primary reason behind cellular network unavailability glitches lies in unstable internet access. Voice calls over cellular networks often require a stable internet connection. When this connection fluctuates or drops, it can result in the dreaded error message.

2. Terrain Coverage

Another contributing factor is the geographical terrain. In remote or sparsely populated areas, cellular tower coverage might be limited. It causes a signal disturbance or complete loss of the network.

3. Network Congestion

During peak usage hours or in densely populated areas, network congestion can also be a cause. It leads to temporary unavailability of the cellular network for voice calls. When the network is overloaded with traffic, it might struggle to accommodate more voice calls. That results in connectivity issues.

4. Technical Glitches

Furthermore, technical glitches within the Tecno Spark 10 5G device or network infrastructure can cause this issue. These glitches could range from software bugs to hardware malfunctions.

5. Battery or Power Issues

In some instances, insufficient battery power or power-saving modes on devices can cause this issue. They affect the Tecno Spark 10 5G device’s capacity to sustain a consistent connection with the cellular network. This consequently causes voice call unavailability.

Part 2. Prominent Solutions For Cellular Network Not Available For Voice Calls Android

A myriad of purposeful solutions exists to resolve the TracFone cellular network not available for voice calls issue. These solutions are specifically designed to address various underlying causes. The aim of these solutions is to restore smooth connectivity for voice calls. Described below are the top 8 solutions to fix the “Cellular Network Not Available” error:

Method	Efficiency	Difficulty	Duration (Minutes)
Check Network Availability	Moderate	Easy	5-10
Check Airplane Mode	Low	Easy	2-5
Select Network Operator	Moderate	Moderate	5-10
Restart Device	Low to Moderate	Easy	3-5
Enable Roaming Settings	Moderate	Easy	3-7
Update Android Smartphone	Moderate	Moderate	15-30
Performing Factory Reset	High (Last Resort)	Difficult	30-60+
Contact Carrier Provider	High (Specialized Help)	Moderate	Varies (Depends on Carrier Provider)
Wondershare Dr.Fone - System Repair	Highest (Complex Issues)	Easiest	5-10

Solution 1. Check the Availability of Cellular Networks

Before diving into complex fixes, the first thing to do is to check if nearby cell networks are available and how strong their signals are. It is an essential step when trying to fix the “Cellular Network Not Available“ error. This basic check ensures your phone is close enough to a working network tower, which matters for staying connected. It allows you to find out the availability of nearby cellular networks.

Moreover, with it, you can ensure your device is connected to a reliable network. This preliminary check sets the foundation for further troubleshooting.

Solution 2. Check the Airplane Mode of the Smartphone

Another crucial step in resolving this error involves ensuring that the Airplane Mode is disabled. This mode, when activated, disables all wireless connections. It also includes cellular networks, which could lead to connectivity issues. Follow these simple steps to check and disable Airplane Mode on your device:

Instructions: Swipe down on your phone’s screen from the top to access the Notification Panel, unveiling the Quick Settings tiles. Search for the airplane-shaped icon; if Airplane Mode is active, the icon will be highlighted or shown in a distinct color. Tap the Airplane Mode to turn off the Airplane Mode on your Android.

Solution 3. Selecting the Network Operator of the Tecno Spark 10 5G device

In certain instances, manually selecting your network operator can help. It effectively resolves the “Cellular Network Not Available for Voice Calls Android“ error on your Tecno Spark 10 5G. By choosing the network operator manually, you ensure a deliberate connection to a specific carrier. This potentially bypasses issues related to automatic network selection. Follow these steps to select your network operator manually:

• Step 1. Access “Settings” on your Tecno Spark 10 5G, then tap on “Connections.” From there, navigate to “Mobile Networks” and proceed by selecting “Network Operators.”

• Step 2. Look for the “Automatically Select” toggle, which will be turned on. Toggle it off to see available networks and choose the one best suited to your device.

Solution 4. Restart Your Device

Sometimes, resolving the “Cellular Network Not Available for Voice Calls“ error on your Tecno Spark 10 5G can be as simple as performing a restart. This basic troubleshooting step helps refresh the Tecno Spark 10 5G device’s software. It clears temporary glitches and reestablishes essential connections, potentially resolving network-related issues. Follow these straightforward steps to restart your Tecno Spark 10 5G:

Instructions: Hold down the “Power” button until the Power menu emerges on the display. From there, select “Restart” to initiate the Tecno Spark 10 5G device’s reboot process.

Solution 5. Enable Roaming Settings

There are situations where you’re in an area with weak or no coverage from your primary network provider. In such a case, enabling roaming settings on your Tecno Spark 10 5G can sometimes resolve the issue at hand. Enabling roaming allows your device to connect to partner networks. This extends your coverage beyond your home network’s reach. Follow these steps to enable roaming settings on your Tecno Spark 10 5G:

• Step 1. Start by accessing your device’s Settings and tapping the “Connections” option. Here, scroll downward to press “Mobile Networks.”

• Step 2. Presently, you will encounter the “Data Roaming” option. Toggle this option on to enable data roaming on your device and resolve the issue.

Solution 6. Update Android Smartphone

Updating your Tecno Spark 10 5G’s OS to the latest version can often resolve performance issues. It can also fix network connectivity issues, including the “Cellular Network Not Available” error. Manufacturers regularly release system updates containing bug fixes and security patches. It also includes enhancements that can address underlying software-related problems. Follow these steps to update your Android smartphone:

• Step 1. In your device’s Settings, scroll through to find the “Software Update” option. Select it, and on the subsequent screen, verify the availability of any updates.

• Step 2. If an update is accessible, select the ‘Download and Install’ choice. Then, proceed by following the prompts displayed on the screen to finalize the process.

Solution 7. Performing Factory Reset

Performing a factory reset is a drastic but effective measure. It can resolve persistent software-related issues, including the “Cellular Network Not Available” error. Be aware that initiating a factory reset results in the deletion of all data and settings stored on your device. Hence, it is crucial to back up any vital information before proceeding with this action. Here is how to fix the Verizon cellular network not available for voice calls:

• Step 1. To access your device’s “General Management” section, navigate through Settings. There, tap on “Reset,” and select “Factory Data Reset” from the subsequent screen.

• Step 2. You will need to tap “Reset” to confirm your choice. Then, follow the on-screen guidelines carefully to complete the reset process.

Solution 8. Contact Carrier Provider

If you’ve exhausted all options and the issue persists, reaching out to your carrier provider for assistance is a viable solution. Carrier providers can offer specific insights and guidance regarding network-related issues. When connected to customer service, explain the issue you’re experiencing in detail. Contacting your carrier provider enables you to tap into their expertise and resources.

You May Also Like:

Top 5 DFU Tools for iPhone to Enter DFU Mode

9 Ways to Fix iPhone Error 4013 or iTunes Error 4013

Tecno Spark 10 5G ROM Download & Install: The Definitive Guide

Part 3. [100% Resolvable] Resolve Cellular Network Not Available For Calls Issues

Despite all your attempts, the cellular network not available for voice calls remains unresolved. It might state a more complex software-related issue or glitch within the Tecno Spark 10 5G device. However, there’s a solution designed explicitly for addressing such complex issues. That software is Wondershare Dr.Fone, a comprehensive toolkit for Android devices. It stands out as the world’s first one-click Android repair tool.

Dr.Fone specializes in resolving a wide array of Android system issues, including the notorious black screen of death. With this tool, users can effortlessly restore their Android system to normal functionality.

Key Features of Wondershare Dr.Fone

1. Fone’s advanced repairing mechanism has the ability to repair even the bricked Android devices.
2. This tool supports more than 1000 models of Android devices across different brands for system repair.
3. It boasts the highest success rate when it comes to fixing Android devices.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

Steps Needed To Fix the Cellular Network Not Available for Calls Issue via Wondershare Dr.Fone

The following are the steps to resolve the Tracfone cellular network not available for voice calls using Wondershare Dr.Fone:

• Step 1. Open Wondershare Dr.Fone and Opt for System Repair

Launch the software. Then, navigate to the “Toolbox” section located in the left panel. Connect your Tecno Spark 10 5G and proceed by choosing “System Repair.” Then, opt for “Android” to specify the Tecno Spark 10 5G device type. On the subsequent screen, click “Start” to commence the repair procedure.

• Step 2. Provide Details of Your Android Device

The system automatically identifies the brand of the Android device undergoing repair. Afterward, choose the “Name,” “Model,” “Country,” and “Carrier” from the provided list options. If the Tecno Spark 10 5G device is already unlocked, you can choose OPEN in the Carrier section. Then, confirm by checking the warning box indicating agreement and readiness to proceed. Click on “Next” to initiate the repair process for your Tecno Spark 10 5G.

• Step 3. Complete the Android Repair Process Successfully

Follow the guidance displayed on your device’s screen to access Download Mode. Once in, the firmware download begins automatically. During this process, the platform verifies and presents the firmware details. Select “Fix Now” to proceed with the installation of the firmware onto your Tecno Spark 10 5G. Since Android repair will result in the deletion of all data, input “000000” to confirm. This action initiates the system repair process.

safe & secure

3,336,459 people have downloaded it

Conclusion

In conclusion, facing the “Cellular Network Not Available for Voice Calls“ problem on your Tecno Spark 10 5G can be frustrating. This article has explored many ways to fix this issue. These include simple checks like turning off Airplane Mode to solutions like contacting your carrier. However, when facing persistent network problems, a tool like Wondershare Dr.Fone becomes the only hope.

Among the various methods discussed, Dr.Fone stands out as a top choice. Its thorough system repair function targets and removes complex software glitches. The tool’s easy interface, broad compatibility, and secure repair process make it perfect. It is ideal for users looking for a reliable solution beyond regular troubleshooting.

Why isn’t My Tecno Spark 10 5G establishing a connection with the cellular network?

What steps can I take when the mobile network isn’t available?

What might be causing my SIM card to not display a network?

8 Solutions to Solve YouTube App Crashing on Tecno Spark 10 5G

YouTube can be considered among the apps that are widely used by users. And seeing “Unfortunately YouTube has stopped” error on the Android display screen is a thing that you can’t stand. The reasons can be multiple for why YouTube is not working or it keeps crashing. For instance, an outdated app, not updated OS, low storage, or corrupted cache. No matter what has triggered the problem on your device, we have solutions for it. Please read and follow this article to get the problem sorted.

Restart the app

The issues like YouTube keeps crashing are often get disappeared by just quitting and restarting the app. This is helpful to give a fresh start to the app and restarting will bring your device back to normal. Hence, the first resolution we would like to recommend is to restart your app. Follow the steps to do this.

• Go to “Settings” and tap “Apps & Notifications” or “Application”.
• Choose “YouTube” from the list of apps and open it.
• Tap on “Force Close” or “Force Stop”.

• You can now restart your device and then launch the app again. Check if this works or not.

Restart the Android

Similar to the app, if you restart the Tecno Spark 10 5G device, it will start operating properly making the YouTube app work better than before. So, as the next tip, please restart your device.

• Long press the “Power” key.
• Press “Restart” and confirm.

Use a VPN

There is a possibility that YouTube is prohibited in your region. Banning some apps is done for some safety reasons. And therefore, you need to check if this is done in your area or not. If yes, then we shouldn’t mention the reason why YouTube is not working on Android. In such a case, use a VPN to access YouTube.

Clear the Cache of YouTube

When the stored cache files start getting crash, the “Unfortunately YouTube has stopped” sort of errors are likely to appear. And therefore, if the above method didn’t work, try this one to get the problem resolved. We are going to clear the cache of YouTube to make it run smoothly.

• Go to “Settings” and tap “Apps & Notifications”/”Applications”.
• Now, choose “YouTube” from the list of apps.
• Open “Storage” and click on “Clear Cache”.

Reinstall YouTube from Play Store

If YouTube keeps crashing, make sure to uninstall and reinstall it from Play Store. Doing this will make the app gets refreshed, remove the glitches, and make it normal as a result. Here are the steps for it.

• Firstly, uninstall it by “Settings” > “Apps” > “YouTube” > “Uninstall”.
• Now, go to the “Play Store” and search “YouTube”. Tap on “Install”.

Reset Network Settings

The apps that run on the internet might start crashing due to connectivity issues. Therefore, resetting the network settings once can work as a great remedy to follow when YouTube has stopped on your Tecno Spark 10 5G. This will remove all your network settings like Wi-Fi passwords etc.

• Tap on “Settings” followed by “Backup and reset”.
• Look for “Reset Network Settings”.

Note: In some phones, you may find the option in “System” > “Advanced” > “Reset”.

Re-flash the stock ROM of Android in one click

There are times when a corrupted system gives you such errors. And therefore, you should try re-flashing the stock ROM on your Tecno Spark 10 5G. Before you wonder how we would like to introduce a highly recommended tool for this. It is Dr.Fone - System Repair (Android). It holds the proficiency to flash the stock ROM in just a click. So, when your YouTube is not responding due to a corrupted system, make use of this tool to get it solved. The benefits associated with this tool are as follows.

Dr.Fone - System Repair (Android)

Android repair tool to flash the stock ROM of Android

• Easy to use and quickly fixes the issues
• Has the capability to repair any Android system issue
• 1000+ Android models are supported
• Takes no special technical knowledge to use
• Higher success rate with promising results

3981454 people have downloaded it

Step 1: Launch the Tool

Start with visiting the website on your PC and downloading the Dr.Fone toolkit. Install and open the tool. Now, from the main screen, choose “System Repair”.

Step 2: Connect Device

With the help of the USB cord, connect your Tecno Spark 10 5G to the computer. Click on “Android Repair” now from the left panel.

Step 3: Enter Information

Now, as the next step, you need to make sure of the details of your device. Please enter the name and brand of the phone. The country, region, and career are also to be added. Hit on “Next” once done.

Step 4: Download Firmware

Now, follow the instructions given on the screen according to your device. Click on “Next” and the program will start downloading the firmware.

Step 5: Repair the Issue

Lastly, when the firmware is downloaded, the system will start getting repaired on its own. You need to wait until you are informed about the completion of the process.

Reset Factory Settings of this Device

When nothing works, the last resort you can go with is resetting the Tecno Spark 10 5G device to factory state. Doing this will remove any sort of conflicting bugs and other stuff. However, this will remove the data from your device. So make sure to backup everything before going with this method. The steps are:

• Open “Settings” and tap “Backup & reset”.
• Go to “Factory data reset” and tap “Reset phone”

How to Resolve Tecno Spark 10 5G Screen Not Working

Nothing is more frustrating than your phone’s touch screen becoming unresponsive. Given the importance of smartphones in daily work, a phone with a touch screen not working can badly affect your routine. It is an issue found in most smartphone brands, even among Tecno Spark 10 5G phones, known for their efficient performance. If your Tecno Spark 10 5G screen is not working, it can be an exhausting experience.

Luckily for your, multiple ways are available to resolve this issue. This article will list six fixes for resolving the Tecno Spark 10 5G not working issue. It will also discuss the reasons behind this issue in detail and provide a list of tips to avoid it in the future.

Part 1: What Causes Tecno Spark 10 5G Screen Unresponsive?

Answering what causes Tecno Spark 10 5G screen unresponsiveness is difficult. Many reasons, ranging from minor bugs to serious hardware issues, can cause it. To find out the exact or near exact reason, you will have to review your device’s activity before this issue occurs. You can use the following common reasons behind the Tecno Spark 10 5G 6T touch screen not working as the basis of your investigation:

1. Touchscreen Calibration

Excessive smartphone use can cause the touchscreen to go out of the required settings. It means until the touch screen is not recalibrated properly, the touch not working issues will continue to pop up.

2. Battery Issue

If your device’s battery is damaged or is at the end of its lifespan, it can cause the touch screen not responding issues. Moreover, the low battery and issue with the charging port can also lead to this problem.

3. Corrupted System Files

The presence of corrupted system files is also a significant cause of such issues. These corrupted files can also lead to serious performance issues on your phone.

4. Conflicting Settings

It is also possible that the conflicting settings in your device are causing this issue. These settings can range from touch sensitivity to screen refresh rate. Unless these conflicts are removed, the touchscreen performance will continue to degrade.

Part 2: The Common Solutions to Solve a Tecno Spark 10 5G Screen Unresponsive

Fixing the Tecno Spark 10 5Gscreen not working is easy as long as it is not a serious hardware issue. While there are multiple ways to solve this problem, we have chosen the 6 most common and easy solutions. Listed below are the 6 common solutions to solve a Tecno Spark 10 5G screen unresponsive:

Solution 1. Restart the Tecno Spark 10 5G Phone

As with any other issue or device, the first fix you should always try first is to restart your device. It is the best solution to fix the Tecno Spark 10 5G not working issue if temporary bugs and glitches are the reason behind it. When you restart your device, it flushes out all temporary bugs and glitches while resetting your device’s processes. Use this guide to restart your Tecno Spark 10 5G device:

Instruction: Press and hold the “Power” button for a couple of seconds until it turns off. Wait a few moments and then use the “Power” button to turn on the Tecno Spark 10 5G device. In some of the Tecno Spark 10 5G devices, you also have to use the “Volume Down” button along with the “Power” button to restart the Tecno Spark 10 5G device.

Solution 2. Check the Charging Port and Battery

The issues with the battery of your Tecno Spark 10 5G 5 can also lead to Tecno Spark 10 5G not working. It can be due to your device’s low or near-empty battery. While in some cases, serious issues with the battery can also be behind this problem. Similarly, the reason behind your phone’s touch not working can be charging port issues.

Thus, you should check and clean your device’s charging port and see if it resolves the problem. Moreover, turn off your device, charge it, and then restart it to check if the touch screen not working issue is gone.

Solution 3. Contact the Tecno Spark 10 5G Customer Support

Contacting Tecno Spark 10 5G customer support can also help resolve the Tecno Spark 10 5G screen not working problem. It is especially helpful if you are unable to find the cause and want to seek an expert opinion. The Tecno Spark 10 5G customer support will help you find the issue and recommend a solution.

It is an excellent option if your Tecno Spark 10 5G device’s touch is not working due to hardware issues. They can help guide you to a suitable service center to fix your phone and resolve this issue.

Solution 4. Wipe the Cache of Your Tecno Spark 10 5G Device

A common reason for Tecno Spark 10 5G Nord being stuck on the loading screen is the filled cache partition. If you do not clean out the cache partition of your Tecno Spark 10 5G device, its performance will degrade. As a result, your device will experience issues like the touch screen not working or getting stuck at the loading screen. Here is how you can clear the cache of your Tecno Spark 10 5G device:

Step 1: Turn off your device by pressing and holding the “Power” button. Once it is turned off, press and hold the “Power” and “Volume Down” buttons until you see the Tecno Spark 10 5G logo.

Step 2: Now, enter your phone’s PIN or pattern and choose a language. After selecting the language, choose “Wipe data and cache.”

Step 3: Select “Wipe cache” on the next screen and confirm the action through “Yes” in the ensuing window. Once the process is complete, choose “Reboot” to restart your device.

Solution 5. Reset to Factory Settings

Sometimes, clearing the cache partition doesn’t help resolve the touchscreen issue. In that case, You have to factory reset your Tecno Spark 10 5G device. It is the best and last solution if other fixes haven’t worked and you can’t pinpoint the reason. Factory resetting your Tecno Spark 10 5G will delete all phone data. Thus, you should create a proper backup before trying this fix. Follow these steps to factory reset your Tecno Spark 10 5G in no time:

Step 1: Launch Settings on your Tecno Spark 10 5G device and tap “System” to select “Reset Options.”

Step 2: In the “Reset Options,” select “Erase all data (factory reset)” and confirm the action by again pressing “Erase All Data.” It will start the factory reset process.

Solution 6. Replace the Old Screen with A New Screen

If none of the above-mentioned fixes have worked so far, you should replace the touch screen. Replacing the touch screen is recommended in case of hardware and severe software issues. However, it can be quite an expensive fix as new touch screens aren’t cheap. The prices for new touchscreens differ depending on the model. These prices start from $20 and go up to hundreds of dollars.

Part 3: How to Avoid Tecno Spark 10 5G Screen being Unresponsive?

Protecting your Tecno Spark 10 5G device against system issues like touch not working is not difficult. While it is true that you can’t 100% avoid such problems, the risks can still be reduced to a great extent. To prevent your Tecno Spark 10 5G screen from being unresponsive, here are some tips you can follow:

• ****Regular Updates:****You should always ensure that your Tecno Spark 10 5G device runs on the latest software version available. It can help prevent bugs or glitches that might cause the screen to become unresponsive.
• ****Device Protection:****It is also essential that you use a good quality phone case and screen protector. These will protect your Tecno Spark 10 5G device from physical damage. Drops, bumps, or scratches can damage the screen and make it unresponsive.
• ****Delete Unnecessary Apps:****If you have too many apps on your Tecno Spark 10 5G devices, it can cause screen unresponsiveness issues. Thus, you should only install the apps you need and delete the apps that are no longer needed.
• ****Use Dr.Fone 13:****Having a professional tool like Fone in your arsenal helps a lot in protecting against system issues. If a system issue is able to pass through, Dr.Fone has the ability to resolve the issue in a matter of seconds. Moreover, it is a complete smartphone tool with data transfer, location changer, and system repair features.

A new version of Dr.Fone is expected to release in the latter half of this month. The new version will include many improvements, advanced features, and increased device support. Furthermore, it will also have a better and more user-friendly interface.

Conclusion

To sum up this article, it can be said that issues like Tecno Spark 10 5G not working are part of life. These issues can occur anytime and are hard to completely protect against. Thus, having a problem solver like Wondershare Dr.Fone is the best choice. It will not only help you safeguard against system issues but also resolve them if they occur.