Cellular Network Not Available for Voice Calls On Vivo Y200

The “Cellular Network Not Available for Voice Calls“ error is a common experience for many Android users. In our contemporary world, communication stands as the fundamental pillar of our existence. Yet, the malfunctioning of our devices hinders this connectivity. It often gives rise to numerous complications. Fortunately, your concerns are now a thing of the past.

This article serves as your guide for troubleshooting and overcoming this frustrating dilemma. It has compiled expert perspectives, valuable tips, and detailed, systematic solutions. The article will go through the underlying causes behind this issue and explore potential fixes. By the conclusion of this article, you’ll be armed with the necessary knowledge to tackle this problem.

Part 1. Preliminary Reasons For Cellular Network Not Available For Voice Calls

Facing the “Cellular Network Not Available for Voice Calls Android“ error can be overwhelming. Thus, it becomes evident that specific reasons underlie this issue. Solutions indeed exist to tackle this problem. Yet, comprehending the underlying reasons is equally crucial to resolve the issue:

1. Internet Access

One primary reason behind cellular network unavailability glitches lies in unstable internet access. Voice calls over cellular networks often require a stable internet connection. When this connection fluctuates or drops, it can result in the dreaded error message.

2. Terrain Coverage

Another contributing factor is the geographical terrain. In remote or sparsely populated areas, cellular tower coverage might be limited. It causes a signal disturbance or complete loss of the network.

3. Network Congestion

During peak usage hours or in densely populated areas, network congestion can also be a cause. It leads to temporary unavailability of the cellular network for voice calls. When the network is overloaded with traffic, it might struggle to accommodate more voice calls. That results in connectivity issues.

4. Technical Glitches

Furthermore, technical glitches within the Vivo Y200 device or network infrastructure can cause this issue. These glitches could range from software bugs to hardware malfunctions.

5. Battery or Power Issues

In some instances, insufficient battery power or power-saving modes on devices can cause this issue. They affect the Vivo Y200 device’s capacity to sustain a consistent connection with the cellular network. This consequently causes voice call unavailability.

Easy and Safe Partition Software & Hard Disk Manager

Part 2. Prominent Solutions For Cellular Network Not Available For Voice Calls Android

A myriad of purposeful solutions exists to resolve the TracFone cellular network not available for voice calls issue. These solutions are specifically designed to address various underlying causes. The aim of these solutions is to restore smooth connectivity for voice calls. Described below are the top 8 solutions to fix the “Cellular Network Not Available” error:

Method	Efficiency	Difficulty	Duration (Minutes)
Check Network Availability	Moderate	Easy	5-10
Check Airplane Mode	Low	Easy	2-5
Select Network Operator	Moderate	Moderate	5-10
Restart Device	Low to Moderate	Easy	3-5
Enable Roaming Settings	Moderate	Easy	3-7
Update Android Smartphone	Moderate	Moderate	15-30
Performing Factory Reset	High (Last Resort)	Difficult	30-60+
Contact Carrier Provider	High (Specialized Help)	Moderate	Varies (Depends on Carrier Provider)
Wondershare Dr.Fone - System Repair	Highest (Complex Issues)	Easiest	5-10

Solution 1. Check the Availability of Cellular Networks

Before diving into complex fixes, the first thing to do is to check if nearby cell networks are available and how strong their signals are. It is an essential step when trying to fix the “Cellular Network Not Available“ error. This basic check ensures your phone is close enough to a working network tower, which matters for staying connected. It allows you to find out the availability of nearby cellular networks.

Moreover, with it, you can ensure your device is connected to a reliable network. This preliminary check sets the foundation for further troubleshooting.

/a>

Solution 2. Check the Airplane Mode of the Smartphone

Another crucial step in resolving this error involves ensuring that the Airplane Mode is disabled. This mode, when activated, disables all wireless connections. It also includes cellular networks, which could lead to connectivity issues. Follow these simple steps to check and disable Airplane Mode on your device:

Instructions: Swipe down on your phone’s screen from the top to access the Notification Panel, unveiling the Quick Settings tiles. Search for the airplane-shaped icon; if Airplane Mode is active, the icon will be highlighted or shown in a distinct color. Tap the Airplane Mode to turn off the Airplane Mode on your Android.

Solution 3. Selecting the Network Operator of the Vivo Y200 device

In certain instances, manually selecting your network operator can help. It effectively resolves the “Cellular Network Not Available for Voice Calls Android“ error on your Vivo Y200. By choosing the network operator manually, you ensure a deliberate connection to a specific carrier. This potentially bypasses issues related to automatic network selection. Follow these steps to select your network operator manually:

• Step 1. Access “Settings” on your Vivo Y200, then tap on “Connections.” From there, navigate to “Mobile Networks” and proceed by selecting “Network Operators.”

• Step 2. Look for the “Automatically Select” toggle, which will be turned on. Toggle it off to see available networks and choose the one best suited to your device.

Solution 4. Restart Your Device

Sometimes, resolving the “Cellular Network Not Available for Voice Calls“ error on your Vivo Y200 can be as simple as performing a restart. This basic troubleshooting step helps refresh the Vivo Y200 device’s software. It clears temporary glitches and reestablishes essential connections, potentially resolving network-related issues. Follow these straightforward steps to restart your Vivo Y200:

Instructions: Hold down the “Power” button until the Power menu emerges on the display. From there, select “Restart” to initiate the Vivo Y200 device’s reboot process.

Solution 5. Enable Roaming Settings

There are situations where you’re in an area with weak or no coverage from your primary network provider. In such a case, enabling roaming settings on your Vivo Y200 can sometimes resolve the issue at hand. Enabling roaming allows your device to connect to partner networks. This extends your coverage beyond your home network’s reach. Follow these steps to enable roaming settings on your Vivo Y200:

• Step 1. Start by accessing your device’s Settings and tapping the “Connections” option. Here, scroll downward to press “Mobile Networks.”

• Step 2. Presently, you will encounter the “Data Roaming” option. Toggle this option on to enable data roaming on your device and resolve the issue.

Solution 6. Update Android Smartphone

Updating your Vivo Y200’s OS to the latest version can often resolve performance issues. It can also fix network connectivity issues, including the “Cellular Network Not Available” error. Manufacturers regularly release system updates containing bug fixes and security patches. It also includes enhancements that can address underlying software-related problems. Follow these steps to update your Android smartphone:

• Step 1. In your device’s Settings, scroll through to find the “Software Update” option. Select it, and on the subsequent screen, verify the availability of any updates.

• Step 2. If an update is accessible, select the ‘Download and Install’ choice. Then, proceed by following the prompts displayed on the screen to finalize the process.

Solution 7. Performing Factory Reset

Performing a factory reset is a drastic but effective measure. It can resolve persistent software-related issues, including the “Cellular Network Not Available” error. Be aware that initiating a factory reset results in the deletion of all data and settings stored on your device. Hence, it is crucial to back up any vital information before proceeding with this action. Here is how to fix the Verizon cellular network not available for voice calls:

• Step 1. To access your device’s “General Management” section, navigate through Settings. There, tap on “Reset,” and select “Factory Data Reset” from the subsequent screen.

OtsAV Radio Webcaster

• Step 2. You will need to tap “Reset” to confirm your choice. Then, follow the on-screen guidelines carefully to complete the reset process.

Solution 8. Contact Carrier Provider

If you’ve exhausted all options and the issue persists, reaching out to your carrier provider for assistance is a viable solution. Carrier providers can offer specific insights and guidance regarding network-related issues. When connected to customer service, explain the issue you’re experiencing in detail. Contacting your carrier provider enables you to tap into their expertise and resources.

You May Also Like:

Top 5 DFU Tools for iPhone to Enter DFU Mode

9 Ways to Fix iPhone Error 4013 or iTunes Error 4013

Vivo Y200 ROM Download & Install: The Definitive Guide

Part 3. [100% Resolvable] Resolve Cellular Network Not Available For Calls Issues

Despite all your attempts, the cellular network not available for voice calls remains unresolved. It might state a more complex software-related issue or glitch within the Vivo Y200 device. However, there’s a solution designed explicitly for addressing such complex issues. That software is Wondershare Dr.Fone, a comprehensive toolkit for Android devices. It stands out as the world’s first one-click Android repair tool.

Dr.Fone specializes in resolving a wide array of Android system issues, including the notorious black screen of death. With this tool, users can effortlessly restore their Android system to normal functionality.

Key Features of Wondershare Dr.Fone

1. Fone’s advanced repairing mechanism has the ability to repair even the bricked Android devices.
2. This tool supports more than 1000 models of Android devices across different brands for system repair.
3. It boasts the highest success rate when it comes to fixing Android devices.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

Steps Needed To Fix the Cellular Network Not Available for Calls Issue via Wondershare Dr.Fone

The following are the steps to resolve the Tracfone cellular network not available for voice calls using Wondershare Dr.Fone:

• Step 1. Open Wondershare Dr.Fone and Opt for System Repair

Launch the software. Then, navigate to the “Toolbox” section located in the left panel. Connect your Vivo Y200 and proceed by choosing “System Repair.” Then, opt for “Android” to specify the Vivo Y200 device type. On the subsequent screen, click “Start” to commence the repair procedure.

Allavsoft Batch Download Online Videos, Music Offline to MP4, MP3, MOV, etc format

• Step 2. Provide Details of Your Android Device

The system automatically identifies the brand of the Android device undergoing repair. Afterward, choose the “Name,” “Model,” “Country,” and “Carrier” from the provided list options. If the Vivo Y200 device is already unlocked, you can choose OPEN in the Carrier section. Then, confirm by checking the warning box indicating agreement and readiness to proceed. Click on “Next” to initiate the repair process for your Vivo Y200.

• Step 3. Complete the Android Repair Process Successfully

Follow the guidance displayed on your device’s screen to access Download Mode. Once in, the firmware download begins automatically. During this process, the platform verifies and presents the firmware details. Select “Fix Now” to proceed with the installation of the firmware onto your Vivo Y200. Since Android repair will result in the deletion of all data, input “000000” to confirm. This action initiates the system repair process.

safe & secure

3,336,459 people have downloaded it

Conclusion

In conclusion, facing the “Cellular Network Not Available for Voice Calls“ problem on your Vivo Y200 can be frustrating. This article has explored many ways to fix this issue. These include simple checks like turning off Airplane Mode to solutions like contacting your carrier. However, when facing persistent network problems, a tool like Wondershare Dr.Fone becomes the only hope.

Among the various methods discussed, Dr.Fone stands out as a top choice. Its thorough system repair function targets and removes complex software glitches. The tool’s easy interface, broad compatibility, and secure repair process make it perfect. It is ideal for users looking for a reliable solution beyond regular troubleshooting.

vMix Pro - Software based live production. vMix Pro includes everything in vMix 4K plus 8 channels of Replay and 8 vMix Call
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

Why isn’t My Vivo Y200 establishing a connection with the cellular network?

What steps can I take when the mobile network isn’t available?

Glarysoft File Recovery Pro - Helps to recover your lost file/data, even permanently deleted data.

What might be causing my SIM card to not display a network?

App Won’t Open on Your Vivo Y200? Here Are All Fixes

It is not a very rare phenomenon where an App won’t open, crash abruptly or face trouble while launching on an Android device. Many Android phone users also add to the fact that whenever they try to launch an App, it keeps loading but does not run smoothly, as it should in normal circumstances.

In such a scenario it is obvious for Android Smartphone users to look for possible solutions for such a random error so that their App/Apps load and work normally.

Many people are also interested in knowing about the causes behind why an App won’t open or why multiple/all Apps won’t open. This article will answer your query about why won’t my App open on an Android phone by listing a few probable causes for the problem.

Here are all the fixes you need if an App won’t open on your Vivo Y200. Read on to find out all about why Apps won’t open on your Vivo Y200 and solutions to overcome such a problem.

Part 1: Possible reasons for Apps won’t open

If you are an Android phone user and face a problem while trying to open an App on your device, you will ask yourself “Why won’t my App open?”. To answer your question and explain to you why an App won’t open on your phone, here are some probable and simple reasons to make you understand the real problem.

It is appropriate to tag our generation as smartphone addicts because we use smartphones for anything and everything. All our important information, such as photos, videos, audio files, documents, notes, calendars, emails, etc, are stored on our phones. This causes a major storage/space problem in our phones and a shortage of storage space is one of the main reasons why an App won’t open or why all Apps won’t open on your Vivo Y200. To see how much of your storage space is occupied by Apps, go to “Settings” and select “Application Manager”.

Another possible reason for Apps to crash or why an App won’t open is a possible data crash. This may occur due to an unstable internet connection or various other background software interruptions.

The causes for the problem to occur are many and no specific reason can be established as the only reason why Apps won’t open on your Vivo Y200. There are a lot of speculations about why such a problem occurs and persists, but it is more important to focus on how to fix if a particular App won’t open or if all Apps won’t open on Android.

Part 2: Quickest solution to fix apps won’t open on Android

You have already understood ‘why won’t your app open?’ at the start of this article. But, you are not happy with the traditional solutions to fix the app won’t open issue.

Well, in such a case Dr.Fone - System Repair (Android) can prove to be your savior. It resolves failed Android system update issues, crashing apps, and black screen of death. It can also get an unresponsive or bricked Android device or boot loop stuck device fixed with one click.

Dr.Fone - System Repair (Android)

Why won’t my app open? The quick fix is here!

• This is the first software in the industry that repairs Android systems.
• All the latest Vivo Y200 tablets and mobiles are compatible with it.
• With single-click operation, fixing the app won’t open problems is super easy.
• No technical skills are needed to use the tool.
• The high success rate for Vivo Y200 Android device issue fixing.

3981454 people have downloaded it

Here comes the detailed guide to fix apps won’t open problem using Dr.Fone - System Repair (Android)

Note: When you are up to fixing apps won’t open issues, make sure to back up your Vivo Y200 beforehand. These processes might lead to data erasing and you don’t want to suffer data loss this way.

Phase 1: Preparation and connection of Android device

Step 1: Post-installation and launch of Dr.Fone on your computer, you got to press the ‘System Repair’ tab. Connect the Android device later.

Lyric Video Creator Professional Version

Step 2: Hit the ‘Android Repair’ located on the left panel followed by tapping the ‘Start’ button.

Step 3: Feed your Vivo Y200 details under the Vivo Y200 device information screen. Please check the warning and press the ‘Next’ button right after that.

Phase 2: Repairing your Vivo Y200 under ‘Download’ mode

Step 1: You got to boot the Android device under Download mode, as it’s important. The steps for that are as follows –

• Android devise with a ‘Home’ button – Press together ‘Volume Down’, ‘Home’, and ‘Power’ buttons together for 5 to 10 seconds after turning off the Vivo Y200 device. Release them afterward and click the ‘Volume Up’ button to get into the ‘Download’ mode.

SwifDoo PDF 2-Year Plan

• When there is no ‘Home’ button – Turn off the Vivo Y200 device and then for 5 to 10 seconds, keep the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons pressed. Tap the ‘Volume Up’ button after releasing all the buttons to enter the ‘Download’ mode.

Step 2: Hitting the ‘Next’ button starts downloading the Android firmware.

Step 3: Once Dr.Fone - System Repair (Android) verifies the downloaded firmware, it begins fixing the app won’t open the issue asap.

Part 3: 3 Common fixes if a particular App won’t open

In this segment, we will discuss the three best ways to help you fix the problem if only a particular App won’t open/launch/ run and takes an indefinite time to load.

1. Update the App

It is always advisable to keep your Android software as well as your Apps up-to-date and you must constantly check for any updates which may be available in the Google Play Store.

Follow the steps given below to update the app which won’t open on your phone:

• Visit Google Play Store on your Vivo Y200.

• Now select “My Apps & Games” from the main menu.

• In this step, you may click on “Update All” to update all Apps for which an update is available or manually select the Apps which you wish to Update.

Once the App is updated, close all Apps and tabs running in the background. Now try to launch the app once again. If it opens, your problem is solved. If not, DO NOT worry as there are more ways to help you.

2. Force Stop the App

Closing the App completely which won’t open on your phone is a good idea. To make sure that no operations are running in the background related to the App, you must “Force Stop” it. Doing this is extremely simple and all you need to do is follow the steps given herein under:

• Visit “Settings” on your phone.

• Click on “Apps” to see a list of all the Apps on your Vivo Y200.

• Select the App which won’t open.

• Now click on “Force Stop” as shown below.

Software Update Pro - Check and update software installed on your computer.

3. Clear App Cache and Data

This method resolves the issue to a great extent by wiping off unnecessary App content from your device.

Carefully follow the step-by-step instructions given below to clear all App cache and data:

• Visit “Settings” and select “Apps”.

• From the list of Apps that appears, select the App that won’t open.

• Now tap on “Clear Cache” and “Clear data” directly or under “Storage”.

Epubor Ultimate for Win：Helps you read books anywhere, including the best eBook Converter + eBook DRM Removal functions.

Part 4: 3 Common fix if all Apps won’t open on Android

In this segment, we will discuss solutions to the problem if all your Apps won’t open. They are simple and easy to follow and solve the error in no time.

1. Android updates

Firstly, it is very important to keep your Android software updated at all times as an old Android version might not support new Apps or updated Apps.

To update your software:

• Visit “Settings” and keep going downwards.

• Now select “About Phone”.

• From the options available on the screen, tap on “System Updates”

• In this step, if you are prompted for an update, follow the instruction given and do so.

Updating your Android software solves most of your problems. This method might sound weird but works wonders when it comes to App related issues.

2. Restart the phone

Restarting your Vivo Y200 to fix an error might sound old school but it gives good results when your Apps won’t open. Restarting your phone is fairly simple. All you need to do is:

• Long press the power button.

• Now click on “Restart”.

Your phone will automatically restart and once it does, you can try to launch the App. You may also restart your Vivo Y200 by pressing the power button for about 15-20 seconds.

3. Reset Factory Settings

This method is a little tedious and must be last on your list. Also, make sure you take a backup of all your data and contents stored on your Vivo Y200 and this solution will completely wipe off your phone making as good as a new smartphone.

To Factory Reset your Vivo Y200, carefully follow the guidelines given below:

• Visit “Settings” to find the “Backup and reset” option as shown in the screenshot below.

Parental Control Software

#1 Rated Parental Control Software.
Monitor & Control all PC Activity!
sentrypc.com/parental-controls/ 

• Now click on “Factory Data Reset”>“Reset Device”>“Erase Everything”

Your phone will now reboot and will be required to set up from scratch.

“Why Won’t my App open” is a question asked by many Android phone users who fear that the problem occurs due to a virus attack or a system failure. However, this is not the case. The reason for the error to the surface is quite minor and can be fixed by you, sitting at home, without resorting to any kind of technical or external assistance. The solutions listed above are easy to understand and not very time-consuming.

So go ahead and try them out now!

PearlMountain Image Converter

9 Solutions to Fix Process System Isn’t Responding Error on Vivo Y200

The “Process system isn’t responding” is a common error that occurs in almost every kind of Android device. Even though most Android smartphone manufacturers have taken a huge leap in the last few years, the operating system still suffers from a few pitfalls. The process system isn’t responding Android is one of those errors that have been reported plenty of times. I definitely understand encountering the ‘Process System Isn’t Responding’ error on your Vivo Y200 can be frustrating.

However, there are several straightforward methods to resolve this issue. This article will provide a step-by-step guide on how to fix the problem and restore your device to normal functionality.

Before solving any Android system issues, try this Android backup software to take a full backup, in case any data loss happens.

Part 1: Reasons for process system isn’t responding error

There could be plenty of reasons for getting the process system is not responding in Android.

1. Software Glitch: Android systems may experience temporary glitches due to factors like memory management issues, conflicts between apps or services, or system updates.
2. Insufficient System Resources: Low system storage is another reason for getting the error. If you have too many apps on your phone, then it might take a toll on its memory and generate the “process system isn’t responding” prompt.
3. Third-Party Apps: Users have also complained that they receive the “Android process system is not responding” error after installing a new app. If you have installed an app from a source other than Google Play Store, then the chances are that you can get this error. Though, even after installing an app from Play Store, there is a bleak probability of facing this issue as well.
4. Outdated Software: Using outdated apps, particularly system apps or critical components, may lead to compatibility issues with the latest Android version.
5. System Updates: Most of the time, it happens whenever a device is restarted after updating its Android version. Your device could have undergone a bad update or might have had an unsupported driver. This can result in the occurrence of process system not responding issue.
6. Corrupt Cache Files: Corrupted cache files can lead to conflicts and result in error.
7. Overclocking or Modifications: Rooting or modifying the Android device, or applying overclocking settings, can lead to instability and the process system not responding error.
8. Hardware Issues: Rarely, hardware problems like failing components can interfere with the proper functioning of the system.

No matter what the cause is, there are plenty of ways to overcome this issue. We have listed a handful of them in this post.

Part 2: How to Fix Android Process Not Responding? 8 Fixes

When this error occurs, it can disrupt the normal operation of the Vivo Y200 device, causing apps to freeze or crash. Fortunately, there are several effective methods to address this problem.

Fix 1: Restart your device

This is one of the easiest ways to resolve the process system not responding error. If you are getting this error on your phone, then try to manually restart your device. The way to restart your phone might differ from one device to another. Mostly, it can be done by long-pressing the power button. This will provide different power options. Tap on the “Reboot” one to restart your phone.

If it won’t work, then long press the Power and Volume up buttons at the same time until the screen goes off. Afterward, use the power button again to turn it on.

Fix 2: Reset App Preferences

Sometimes the apps interfere with the Vivo Y200 device’s settings because they were given permission to access specific functions. It is recommended to allow the asked permission precisely because some suspicious apps can also steal your sensitive data. Here are the straightforward instructions you need to follow to reset the app preferences:

Proceed to the “Apps and Notifications” settings from the Settings app. Next, tap the “See All Apps” option and access the “Three Dots” menu. Here select the “Reset App Preferences” option and confirm the process from the confirmation pop-up.

Fix 3: Free Up Space to Make Sure Android Have Enough Internal Memory

In case the Android internal memory is completely filled, it will slow down the processing speed of the Vivo Y200 device. Internal memory is vital for the Vivo Y200 device to run all the background apps or the process required by the OS to run the Vivo Y200 device efficiently. You can follow these steps to free up some space on your Vivo Y200:

Step 1: Open the Settings app on your Vivo Y200 and access the “Battery and Device Care” option by scrolling down. Next, tap on the “Three Dots” from the top right corner and choose the “Storage Booster” feature.

NeoDownloader - Fast and fully automatic image/video/music downloader.

Step 2: Following this, you can select the data you want to remove from the internal memory. Your device will show the space it will free up for you, and you can press the “Free Up” button to free up the storage.

Fix 4: Enter Safe Mode to Uninstall Suspicious Apps

This issue can also occur if you have installed an app from the Google Play Store with a very low rating or an APK. Unlike Apple App Store, anyone can easily upload their mobile apps on Play Store, so it is important to check the app’s credibility before installing it. Following are the simplified instructions to enter the safe mode and delete all suspicious applications:

Press and hold the “Power” button of your Android and press and hold the “Power Off” option to access the “Safe Mode” feature. Afterward, confirm to enter the safe mode and remove all the suspicious apps from the Vivo Y200 device. You can do this by holding on to the app and selecting the “Uninstall” option from the pop-up options.

Fix 5: Update All Apps on your Device

Updating the apps is crucial for any Android device to work with high efficiency and performance. Apps are developed to make the users’ daily tasks easy to execute. However, there might be some negligence in the development, which can leave some bugs in the app. These bugs are fixed with time by releasing the new version of the app. To update your Android app, proceed with the following step-by-step instructions:

Step 1: Locate the Play Store from the Android home screen and access it. Then, tap the “Profile” icon from the top right corner and proceed to the “Manage apps and devices” option. Afterward, you can check how many app updates are available from the “Updates available” option. To update the apps, you will have to go inside this option.

Step 2: You can tap on the “Update All” button if you want to update all the apps one by one. Otherwise, you can press the “Update” option adjacent to each app name to update the frequently used ones.

Fix 6: Check the SD card

If you are still getting the process system isn’t responding to Android error, then chances are that there could be an issue with your SD card. Firstly, check if your SD card is working fine or not. If it is corrupted, then get another memory card for your phone. Also, it should have a prominent amount of free storage. You might be facing this issue if the SD card has limited free space.

Also, if you are storing apps on the SD card, then your phone might encounter the process isn’t responding issue whenever you run a respective app. Therefore, you should move apps from your SD card to the phone’s internal memory. To do this, go to your phone’s Settings > Application Manager and select any app. If the app is stored on the SD card, then you will get an option of “Move to devise storage”. Just tap on it and manually move every app to your device storage.

Fix 7: One click to fix the process system isn’t responding error

If all the above tricks don’t get your device out of the process system not responding state, then there may be some system issues on your Android. In this case, an Android repair can successfully fix issues like process system isn’t responding.

Note: Android repair may wipe out existing Android data. Back up your Android data before going on.

Dr.Fone - System Repair (Android)

Android repair tool to fix all Android system issues in one click

• Fix all Android system issues like the black screen of death, system UI not working, etc.
• One-click for Android repair. No technical skills are required.
• Supports all the new Vivo Y200 devices like Galaxy S8, S9, S22, etc.
• Step-by-step instructions are provided. Friendly UI.

3981454 people have downloaded it

Follow the easy steps below to fix process system isn’t responding error:

• 1. Download and install the Dr.Fone tool. Then select “System Repair” from the main window.

• 2. Connect your Vivo Y200 to the PC. After the Vivo Y200 device is detected, select the “Android” tab.

• 3. Select and confirm the correct device details of your Android. Then boot your Vivo Y200 in download mode and proceed.

• 4. Download the firmware and click “Fix Now”.

• 5. After a while, your Android will be repaired with the “process system isn’t responding” error fixed.

OtsAV DJ Pro

safe & secure

Fix 8: Factory reset Android

It is always considered the most used way to factory reset your phone in order to resolve the process system not responding error. Though, this should be your last resort, as it will wipe off your device’s data entirely. Even if you are performing a factory reset, make sure that you back up your data by using a reliable tool like Wondershare Dr.Fone .

Wondershare Dr.Fone

Flexibly Back up and Restore Android Data

• Back up Android data to the computer with one click.
• Preview and restore selectively the backup to any Android device.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restoration.

3,981,454 people have downloaded it

If your phone is functioning, then you can easily factory reset it by visiting Settings > General > Backup & Restore and selecting the option of “Factory Data Reset”. Your device will display a warning regarding all the data files that would be lost or un-synced. Just tap on the “Reset” button to factory reset your device.

If your device is not functioning or locked, then you can perform the factory reset operation by putting your phone into Recovery mode. Most of the time, it can be done by pressing the Power and Volume up button simultaneously for at least 10 seconds. Though, the key combinations might change from one device to another.

After entering the Recovery mode, go to the “wipe data/factory reset” option using the Volume up and down button. Use the Power button to make a selection. If you get an additional message, then select the “yes – delete all data” option. When it is done, you can simply reboot your device.

Power Tools add-on for Google Sheets, Lifetime subscription

Fix 9: Unroot the Vivo Y200 device

It has been further discovered that the process system isn’t responding error is more common in rooted devices. Therefore, if you also have a rooted Android device, then you can choose to unroot it in order to fix this issue. There are different ways to unroot an Android device. One of the easiest ways to do it is by using the SuperSU app.

You can always download either SuperSU or SuperSU Pro app from its website here . Simply install it on our device and launch it whenever you wish to unroot it. Visit its “Settings” tab and select the option of “Full unroot”.

This will generate a warning message regarding all the repercussions of the unrooting process. Just tap on “Continue” to initiate the process.

If you are using an older version of Android, then you might get another pop-up to restore boot images. Simply make the desired selection and start the process. After a while, your device would be restarted the usual way, and it would be unrooted. Most probably, this will resolve the process system isn’t responding error as well.

Now that you know different ways to fix the process system not responding error, you can easily overcome this issue and make the most out of your device. Simply start with the easy fixes, and if they don’t work, then take extreme measures like unrooting your device or restoring it to factory setting. Also, make sure to back up your data before taking any extreme measures.