Full Solutions to Fix Error Code 920 In Google Play on Motorola Razr 40 Ultra | Dr.fone

Full Solutions to Fix Error Code 920 In Google Play on Motorola Razr 40 Ultra | Dr.fone

Ariadne Lv13

Full Solutions to Fix Error Code 920 In Google Play on Motorola Razr 40 Ultra

If you are using an Android device, you might have encountered the error code 920 in Google Play Store. This error usually occurs when you are trying to download or update an app from the Google Play Store. The error code 920 can be quite frustrating, as it prevents you from downloading or updating your favorite apps. However, there are several ways to fix this error and get your apps back up and running. In this article, we will show you some of the best solutions to fix error code 920 in Google Play Store on Motorola Razr 40 Ultra.

Trust me, once you face an error it’s frustrating until you find a solution to it. Almost 90 % of the time we search on the internet for an appropriate solution. But finding a legitimate solution can be hard. Most websites just upload only one method to solve an error. And most times that one single method may not be enough for us. And again we are back to Square one trying to figure out what’s wrong and where we screwed up. Most people face an error 920 on play store. It’s frustrating to get the play store error 920.And not everyone knows what the error 920 is. Rest assured, this article will provide you four methods to get rid of the error 920 problems you face and you will not have to depend on any other further sources for finding out what play store error 920 is or find any other method to get rid of the error 920 on play store.

  • (i) Re-installing the application
  • (ii) Switching off and turning the wifi (cellular data) on
  • (iii) Clearing the cache and data of Google Play Store
  • (iv) Removing and adding back your Google account
## Part 1: What is Error Code 920?

Sometimes people think that they have endangered the fate of humanity because of the error that is being displayed (Just Kidding). Don’t worry you haven’t crashed any server or did any damage to your device but you just gave your device a lot of work. Before you got this error you were downloading a lot of apps right. Well, that’s the exact reason why you came up with this error in the first place. There are various reasons behind this error code 920, however, the prominent ones are –

error code 920

  • a. Too much load on your data connection.
  • b. The cache is not cleaned. Thus the connection is getting hampered due to overload.
  • c. Network connection is not stable.

There are a lot of Android users out there and the error 920 on play store doesn’t have a unique solution. You’ll have to try out a bunch of them and find out what works for your device. So one of the given four methods below is definitely going to work on your device.

Part 2: 5 Solutions to fix error 920

METHOD 1: Fix Error Code 920 By Android Repair

If you’re writing a lot of data to your device in one go, this can sometimes overload your phone which can cause data corruption. This could have happened if you try the method above and then still encounter the play store error 920.

If this is the case, there’s a solution known as Dr.Fone - System Repair that can help. This is an industry-leading package that has everything you need to get your device running as it should be.

Dr.Fone - System Repair (Android)

Easiest Fix to Error Code 920

  • Easy operation with no technical knowledge required
  • Simple, one-click play store error 920 fix
  • Clean and simple to understand user-interface
  • Supports various Motorola Razr 40 Ultra devices, including the latest Motorola Razr 40 Ultra S9/S8
  • The #1 Android repair software in the world

3,545,081 people have downloaded it

If this is the answer you’re looking for to help you fix your error code 920 problems, here’s a step by step guide on how to use it;

Note: please note that this method may erase all personal data on your device, so make sure you’ve backed up your device before continuing.

Step #1 Head over to the Dr.Fone website and download the Repair software for your Windows computer.

Step #2 Once installed, open the software and select the ‘System Repair’ option from the main menu.

fix error code 920 in one click

Then connect your Motorola Razr 40 Ultra using the official cable and select the ‘Android Repair’ option.

select android repair

Step #3 On the next screen, insert your device information to ensure you’re downloading the correct firmware.

device details

Step #4 Put your phone into Download mode by following the onscreen instructions.

fix error code 920 in download mode

Dr.Fone will now download your firmware and automatically install it onto your device. Your phone will then reset, and you’ll be ready to use it without experiencing that annoying error 920 play store code!

METHOD 2: Re-installing the application

This is the first thing that you want to try before going on to the more advanced one. In fact, this is the first thing I’d recommend you to try if you come up with an Error code 920. Just try this whenever you get any error.

Step 1 - Go to the application that you got the error with.

Step 2 - Open that application download page on the Play store.

Step 3 - Uninstall it or even uninstall all the update (If the error came when you were updating the application).

Step 4 - Now you clear the task manager and try installing it once again. If the play store error 920 doesn’t come then you have solved the problem and now wasn’t that easy. So it’s always best to try this step before doing anything else.

error code 920-install apps

METHOD 3: Switching off and turning the wifi (cellular data) on

This is another basic method in solving the play store error 920. This error comes in when you have given too many tasks to download.

Step 1 - To remove that load Just turn your wifi off and then turn your wifi on (the same goes with your cellular data).

Step 2 - Now after doing this go to your Play Store application and download the application that you were going to download. Now your Play Store Error 920 won’t be bothering you anymore.

error code 920-turn off wifi

METHOD 4: Clearing the cache and data of Google Play Store

This is a little more complicated (complicated as in you will need to do a little more than the previous two methods). What you need to do is clear the cache and clear the data of the play store. This will get rid of the error code 920 the next time you download or update any application from the Google Play store.

Step 1 – Go to settings of your device.

Step 2 – Now find “Applications” option under the settings menu. Here you can find “Google Play Store” option. Open it.

Step 3 – Now, at the bottom, you can find “Clear Cache” option. Tap on it and your all cache will be cleared.

error code 920-google play store clear cache

After doing this step clear your task manager (delete all recent applications). Go to play store and resume your download or update.

METHOD 5: Removing and adding back your Google account

It is best if you follow the order of the methods mentioned. Like, try each method in the given order until you get rid of the play store error 920. If you reach here then you truly must be in a desperate position to get rid of this error. The best and guaranteed way is to delete your Google account from your phone. By deleting what is meant here is to temporarily remove your account and the adding it in again. What this does is it kind of resets your play store details and it eradicates the error code 920. To do this you need to

Step 1 - go to Settings of your Mobile.

Step 2- Now, find “Accounts” and then go to “Google Accounts”.

Step 3 - In that section find the account you use for the play store or the account that you were using while the error came in. Once you tap on your specific account you’ll find an option to remove the account. Tap on it.

Step 4 - Now you have successfully removed your account and after that re-add your account. After entering your email id and password and hence adding your account. Go back to the play store and find the application that you were downloading or updating when the error code 920 came in. Now re-install it or update it back again. This time you won’t be faced with the play store error 920.

error code 920-remove account

Again it is best if you follow the methods as illustrated above for removing error code 920 and this might have solved your problem by now. If now, you go for a complete factory reset, do it only at the extreme stage as this will delete all your personal data.

Play Store error 920 is a pretty common error and its solutions are also very easy. Please do ensure that you follow each and every step in sync so that you can get the best result out of these methods and get over with the error code 920 on Google play store.

What To Do When Motorola Razr 40 Ultra Has Black Screen of Death?

Have you ever got the error of freezing the Android device home screen? Or the notification light keeps blinking without anything shown on display? Then you are facing Android black screen of death.

This scenario is common with many Android mobile users, and they always hunt for solutions to get rid of this Android black screen problem. Here are some more situations that can assure you that you are facing Android black screen of death.

  • The light of the phone is blinking but the Motorola Razr 40 Ultra device is not responding.
  • The phone is hanging and freezing very frequently.
  • The mobile is rebooting and crashing more often and the battery is draining a lot faster.
  • Phone restarts on its own.

If you face these situations, you might be facing the Android black screen of death issue. Follow this article, and we’ll discuss how to get rid of this annoying problem at ease.

Part 1: Why Android device gets black screen of death?

Similar to the “Blue Screen of Death “ (BSOD) on computers, the Android Black Screen of Death indicates a severe system crash or malfunction. When this issue occurs, the Motorola Razr 40 Ultra device’s display remains blank, and you are unable to interact with the Motorola Razr 40 Ultra device, access apps, or perform any actions. The cause of the Android black screen of death can vary, but some common factors include:

  • Install incompatible apps or apps with bugs and viruses.
  • Have bugs or errors in the Android operating system.
  • Keep the mobile charged for long after it’s fully charged.
  • Use a non-compatible charger.
  • Use an old battery.
  • Incorrectly install or incomplete system updates.
  • Excessive heat due to heavy usage or environmental factors.

If you face the situations mentioned above, this is clearly a case of the Android screen black. But don’t worry about that. You can follow the article below to get rid of this situation on your own.

Part 2: How to rescue data when Android gets black screen of death?

This annoying Android black screen of death is making it impossible to access your internal data. So, the possibility is that you might lose all the data. We have a solution for all of your data recovery problems from a damaged Android device.

The solution for recovery data is the Dr.Fone - Data Recovery (Android) toolkit by Wondershare. This tool is highly appreciated worldwide and very popular for its feature-rich user interface. This tool can perform a lot of functions that can successfully recover the data from a damaged device.

Dr.Fone - Data Recovery (Android)

Use this revolutionary toolkit to get the data back from the black tablet screen of death. Connect the Motorola Razr 40 Ultra device with the PC after installing this tool and follow the on-screen instruction, and all of your data will be transferred to your PC. Unfortunately, the tool is supported on selected Motorola Razr 40 Ultra Android devices as of now.

Dr.Fone - Data Recovery (Android)

A Dedicated Tool to Retrieve Data from Broken Android Devices .

  • Recover data from broken devices or devices that are damaged in any other way, such as those has black screen.
  • Recover photos, videos, contacts, messages, call logs, and more.
  • Highest retrieval rate in the industry.
  • Compatible with most Motorola Razr 40 Ultra devices.

3981454 people have downloaded it

Part 3: 9 Solutions to fix the black screen of death of Android

Project Manager - Asset Browser for 3Ds Max

3.1 One click to fix the black screen of death

Facing an Android device with a black screen of death, I believe, is one of the gloomiest moments of one’s life, especially for those who know little about the technical part of Android. But here is the truth we have to admit: most cases of the black screen of death arise due to system glitches in Android.

What to do? Shall we find someone who is tech-savvy to seek help? Come on, this is the 21st century, and there are always one-click solutions to deal with technical issues for laymen like you and me.

Dr.Fone - System Repair (Android)

Fix Black Screen of Death for Android In One Click

  • Fix all Android system issues like a black screen of death, OTA update failures, etc.
  • Update the firmware of Android devices. No technical skills are required.
  • Support all the new Motorola Razr 40 Ultra devices like Galaxy S22, S23, etc.
  • Click-through operations to bring Android out of the black screen of death.

3,364,231 people have downloaded it

Here are the easy steps to get your Motorola Razr 40 Ultra out of the black screen of death:

  1. Download and install the Dr.Fone tool. After launching it, you can see the following screen pop up.

![fix android black screen of death using a tool](https://images.wondershare.com/drfone/guide/drfone-home.png)
  1. Select “System Repair” from the home page, and then click on the “Android “.

Nero Burning ROM:
The ultimate burning program for all your needs!

![fix android black screen of death by selecting the repair option](https://images.wondershare.com/drfone/guide/android-system-repair-1.png)
  1. Click “Start” to commence the Android system repair. In the next screen, select and confirm your Android model details like name, model, country, etc. and go on.


![choose android info](https://images.wondershare.com/drfone/guide/android-system-repair-2.png)
  1. Boot your Android into Download mode by following the on-screen demonstrations.

    boot to download mode to fix android black screen of death

  2. Then the tool will download the Android firmware and flash the new firmware to your Motorola Razr 40 Ultra.

![fixing android black screen of death](https://images.wondershare.com/drfone/guide/android-system-repair-8.png)
  1. A moment later, your Motorola Razr 40 Ultra will be repaired completely, and the black screen of death will be fixed.

    android brought out of black screen of death

Video guide: How to fix the Android black screen of death step by step

safe Downloadsafe & secure

3.2 Force restart your Motorola Razr 40 Ultra

Because it is the quickest and most painless solution, most people do this when their Android phone screen goes black too fast. The majority of phone issues can be resolved by performing a hard reboot. Here are the necessary measures if you haven’t tried this method before.

To reboot your Motorola Razr 40 Ultra, you may need to press a specific key combination, depending on the model you have, but most Android devices can be force restarted by doing the following steps:

Step 1: Press and hold the power button for about 10-15 seconds. Keep holding it until the Motorola Razr 40 Ultra device restarts.

Step 1: For Motorola Razr 40 Ultra devices, press and hold down the Power and Volume Down buttons for about 7 seconds.

force restart android

Forex Robotron Gold Package

3.3 Check and clean your phone

This method might not be popular with Android users, but this can do wonders when dealing with an Android black screen of death issue. To do this, follow the steps provided below:

Step 1: Ensure your phone’s buttons and ports are not stuck before anything else.

Step 2: See if dirt prevents you from turning the Motorola Razr 40 Ultra device on. Then, quickly press and release the button a few times.

Step 3: If the phone isn’t charging normally, ensure the charging port isn’t clogged with dust and debris by checking and cleaning it. You can gently blow out any debris in the charging port or use a wooden toothpick to pry it open.

Step 4: After you’re done with the cleaning, it’s best to charge the phone for at least 10 minutes. Just give it a quick charge and then try to restart it.

wa stickers

3.4 Remove the battery

If your phone’s battery is removable, you can try taking it out and trying again if restarting and cleaning it doesn’t fix the problem.

Step 1: To get started, take the phone apart by starting at the back.

Step 2: After 20 to 30 seconds, take out the battery and put it back in.

Note: When replacing the battery, ensure the metal contacts correctly connect to the phone.

Jutoh Plus - Jutoh is an ebook creator for Epub, Kindle and more. It’s fast, runs on Windows, Mac, and Linux, comes with a cover design editor, and allows book variations to be created with alternate text, style sheets and cover designs. Jutoh Plus adds scripting so you can automate ebook import and creation operations. It also allows customisation of ebook HTML via templates and source code documents; and you can create Windows CHM and wxWidgets HTB help files.

remove battery of android phone

This easy and straightforward method should help you fix your Android screen black issue, but if it doesn’t, continue reading, as this article got more techniques you can try.

3.5 Recharge the Motorola Razr 40 Ultra device

If your Motorola Razr 40 Ultra screen suddenly goes black, let the battery die completely. Then once the battery is completely dead, you should plug it in to charge and turn it on by pressing the Power button. Try to check if you still encounter the issue after doing so.

3.6 Wipe cache partition to fix black screen of death

If your Motorola Razr 40 Ultra turns on, but the screen remains black, clearing the cache partition should solve the problem. After all, keeping caches on your phone would cause it to run more slowly and cause other problems. Therefore, the issue can be resolved by clearing the cache partition. Check the following steps on how to do this below:

Step 1: Turn off your Motorola Razr 40 Ultra.

Step 2: Boot the Motorola Razr 40 Ultra device into Recovery Mode.

Note: The steps necessary to enter recovery mode will vary depending on your specific Android phone model. To ensure you’re doing the correct steps for your device, consult the user manual or look it up online. The following instructions work for Motorola Razr 40 Ultra devices:

  • For older Motorola Razr 40 Ultra devices with the home button: Press and hold the Volume Up button, the Power button, and the Home buttons simultaneously.
  • For newer Motorola Razr 40 Ultra devices without the home button: Press and hold the Volume Up button and the Power button together.
  • If the Motorola Razr 40 Ultra device logo appears, release your grip, and the phone will restart.

Step 3: Find the Wipe cache partition option using the volume controls after entering Recovery Mode.

wipe cache partition android phone

Step 4: Select Wipe cache partition by pressing the Power button.

Step 5: On the next screen, use the Volume Down button to highlight “Yes” and then press the Power button to confirm the cache wipe.

Step 6: The cache partition will be wiped, and you will see the “Cache wipe complete” message on the screen.

Step 7: Use the Volume Down button to navigate to the “Reboot system now” option and press the Power button to reboot your Motorola Razr 40 Ultra device.

After rebooting, you can see that you have successfully got rid of the annoying Android black screen of death. For most of the cases, this method solves the problem. If not, you have to move to the next method.

3.7 Uninstall incompatible apps

Android screen black can be a result of installing a bug or incompatible apps. If you have recently installed an app that crashes frequently, that may be the reason for the issue. Uninstalling the app from the Motorola Razr 40 Ultra device may solve the problem with ease. For doing this, you need to boot your device in Safe mode. Follow the below steps.

Step 1: Power down your device by pressing and holding the Power button until a menu appears.

Step 2: Navigate to Safe Mode by pressing and holding the Power Off button.

Step 3: Tap the “Safe mode” icon to enter Safe mode. You should now see Safe Mode at the Motorola Razr 40 Ultra device’s bottom.

Step 4: After selecting Settings, head to the Apps section.

Step 5: Select the app by clicking on it; the App Info window should appear. To uninstall the app, tap the Uninstall option from the menu below the screen.

uninstall app on android phone

Step 6: Now restart the Motorola Razr 40 Ultra device by pressing the power button and let it boot up in normal mode.

If the app is the reason for Android black screen of death, then after uninstalling, you can get rid of this issue. If not, now you have to factory reset your device to solve the problem.

3.8 Reboot to safe mode

Even after multiple attempts to launch them, certain applications act suspiciously and cause the Motorola Razr 40 Ultra device to crash. When an Android phone suddenly goes black, you can often isolate the problem to a specific app by booting into Safe mode.

Step 1: Begin by restarting your phone. To do that, press the Power button until a menu appears.

Step 2: Press the Power Off button to enter Safe mode.

Step 3: Activate Safe mode by clicking the “Safe Mode” icon.

enter android in safe mode

Step 4: To return to Normal mode, turn off your device and then turn it back on.

3.9 Factory reset to fix Android black screen of death

The factory reset is the option that enables the factory state of your device by erasing all data, settings, bugs, and apps. Your device will be fresh like factory condition after this reset. Worth mentioning here, you’ll lose all the internal data and installed apps after this reset. So, to overcome the Android tablet black screen of death, you must perform this action as the last option. Follow the below steps carefully.

Step 1: Turn off the Motorola Razr 40 Ultra device. Then press the Volume Up + Power button + home button (or press Volume Up + Power buttonS) altogether and let the mobile boot into recovery mode.

Step 2: After booting up in recovery mode, you can find the “Factory data reset” option. Navigate to that option with the volume up and down arrow and select it with the power button.


Home Use license is dedicated for personal, non-commercial use only.
If Action! is used for commercial gain or to further any commercial purpose,
a Commercial Use license is required. Multi-license (volume discount) is intended for single

company, user or members of the same household. Action! - screen and game recorder</a>

Factory data reset

Step 3: In this step, you need to confirm your action by tapping on the “Yes” option. After this, your device will start erasing. This may take a while to complete the whole process.

Now, your device will reboot automatically and you can see the Android black screen of death problem is solved.

Greeting Card Builder

Part 4: How to avoid Android black screen of death?

These are the general methods to overcome the situation of Android screen black. But to avoid this situation, here are a few tips to follow –

  • Install apps from trusted suppliers only.
  • Use security or antivirus software on your device.
  • Take a backup at regular intervals.
  • Always keep Android OS updated.
  • Don’t keep your mobile charged for a long duration after a full charge.
  • If your battery gets old, replace it soon.
  • Keep your device’s storage well-maintained. Regularly delete unnecessary data.
  • Close unused apps running in the background to conserve system resources.
  • Prevent phone overheating by avoiding excessive usage, and not exposing it to direct sunlight for extended periods.

By following these steps, you should avoid the most unpleasant situations, such as the Android screen black. We all know that “Prevention is always better than cure”.

The Bottom Line

There could be a lot of reasons why an Android black screen issue occurs, but the important thing is knowing the correct ways how to fix it. And this article has covered nine proven methods to help you fix an Android phone screen black problem.

But among the methods discussed above, Dr.Fone – System Repair just stood out as this program does not only help you with a black screen of death problem, but it covers many other Android system issues too. It’s also a highly intuitive program that requires no skills to operate.

safe Downloadsafe & secure

Calls on Motorola Razr 40 Ultra Go Straight to Voicemail? 12 Fixes

Have you ever experienced incoming calls to your phone go straight to voicemail without ringing? It can be frustrating, especially if you’re expecting an important call. It could be due to simple things like turning down the volume or forgetting to turn off the Do Not Disturb mode. In other cases, it might be because you accidentally blocked the caller’s number.

In most cases, incoming calls going to voicemail without ringing are common. However, if it’s happening frequently or for all calls, your phone may have a problem.

This article will discuss why incoming phone calls go straight to voicemail and how to fix the problem. We’ll also show you how to use Wondershare Dr.Fone, a powerful Android System Repair tool, to solve such issues. So, if you’re uncertain why that last call went straight to voicemail, keep reading, and we’ll cover everything you need to know.

phone voicemail notification representation

Part 1: Not Ringing? Here’s Why Calls on Your Phone Go Straight to Voicemail

If an incoming call to your cell phone goes straight to voicemail without ringing, there could be a few reasons. Here’s what to look for and what you should do to fix it:

  1. Turn Off Do Not Disturb (DND) Mode

DND mode is a feature that silences all incoming calls, notifications, and alerts. If DND mode is enabled, your cell phone goes straight to voicemail when someone calls. To turn off DND mode, swipe down from the top of the screen to open the notification settings panel, then tap the Do not disturb icon.

do not disturb mode not enabled

Here’s an alternative way:

  • Step 1: Open the Settings app and go to Notifications.
  • Step 2: Tap Do not disturb.

notifications settings interface

  • Step 3: Toggle Do Not Disturb offto disable the mode.
  1. Turn Off Call Forwarding

One reason calls go straight to voicemail without ringing is if you enabled call forwarding. Call forwarding is a feature that redirects incoming calls to another number. To turn off call forwarding:

  • Step 1: Open the Phone Dialer app on your device, then tap the menu icon and select Settings.

phone dial app settings

  • Step 2: Navigate to Supplementary services > Call forwarding.

call settings supplementary services

  1. Disable Call Barring

If a phone call went straight to voicemail, another possible explanation is the call barring. It is a feature that restricts calls from being made or received on your phone. If activated, it can cause incoming calls to a phone to go straight to voicemail. To turn off call barring on Motorola Razr 40 Ultra devices:

  • Step 1: Open the Phone Dialer app, then tap the menu icon in the top right corner.
  • Step 2: Go to Settings > Supplementary services > Call barring, then tap OK.
  • Step 3: Select Voice call, then turn off your preferred outgoing and incoming calls. When prompted, enter 0000 as a password.

call barring settings interface

  1. Update Your Phone’s Software

Sometimes, software bugs can cause problems with incoming calls, which may be why your last incoming call went straight to voicemail. If your phone runs outdated software, try updating it to the latest version.

To check for updates, open the Settings app and go to Software update or System update. For a seamless update experience, follow the step-by-step instructions on your mobile screen.

software update settings

  1. Reset Network Settings

If the incoming calls on your phone go straight to voicemail, consider resetting your phone’s network settings. Network settings control how your phone connects to the cellular network. If these settings are not set up correctly, incoming calls may not be able to reach your device.

Note: Resetting your network settings will erase any saved Wi-Fi networks and Bluetooth pairings, requiring you to re-enter them after the reset is complete.

To reset your network settings on most Android devices:

  • Step 1: Open the Settings app on your smartphone, then tap System or General Management.
  • Step 2: Go to Reset > Reset Network Settings and confirm the action.

phone reset network settings

  1. Turn Off Bluetooth

When Bluetooth is on, it can interfere with your device’s ability to receive calls, causing them to go straight to voicemail without ringing. To turn off Bluetooth on an Android device, you can do one of the following:

  • Swipe down from the top of the screen to open the Quick Settingspanel, then tap the Bluetooth icon to turn it off.

bluetooth not enabled

  • Go to Settings> Connections > Bluetooth and toggle the switch off.

turn off bluetooth on settings app

It should help ensure that calls come through to your phone instead of going to voicemail.

  1. Check Airplane Mode

If turning off Bluetooth didn’t solve the issue, another possible cause could be that your phone is in Airplane Mode. Airplane Mode turns off all wireless connections on your phone, including cellular service, which can cause calls to dial straight to voicemail. There are two ways to turn off Airplane mode on Android:

Using the Settings app:

  • Step 1: Open the Settings app.
  • Step 2: Tap Network & internet.
  • Step 3: Toggle off Airplane mode or Flight mode.

Using the Quick Settings panel:

  • Step 1: Swipe down from the top of the phone screen to access the Quick Settings panel.
  • Step 2: Look for the Airplane mode or Flight mode icon, then tap it to turn it off.

airplane mode on

  1. Check Blocked Numbers

“My boyfriend’s phone goes straight to voicemail when someone is calling. Any idea why that might be?”

Do you also find yourself asking what does it mean? It could be that he has blocked that phone number. To check this:

  • Step 1: Open the Phone dialer app.
  • Step 2: Tap the menu icon in the top right corner and select Settings.
  • Step 3: Tap Block numbers. If you find the number in the blocked list, remove it to ensure that their calls come through to the phone.

block numbers on the phone

If you still have trouble reaching your boyfriend, try calling him from a different number. If your call didn’t go through, you know that he hasn’t blocked your number and that there may be another issue with his phone.

  1. Turn Off Google One VPN

If you’re using Google One VPN, try turning it off to see if that fixes the problem. Some users have reported that Google One VPN can cause incoming calls to a phone to go straight to voicemail. To turn off Google One VPN:

  • Step 1: Open the Google One app on your Motorola Razr 40 Ultra.
  • Step 2: At the bottom, go to the Benefits tab, then tap View Details below the Online protection with a VPN section.

google one app interface

  • Step 3: Toggle off Enable VPN.

turn off google one vpn

  1. Contact Your Carrier

If your phone calls go straight to voicemail after trying all the above, contact your carrier for help. They may be able to troubleshoot the problem or determine if there is a service outage in your area.

And if your carrier confirms that there is no service outage or billing-related block, the problem may be with your phone itself. You may need to try resetting your phone to factory settings or taking it to a repair shop.

  1. The Caller Used Ringless Voicemail

Ringless voicemail is a service that allows businesses to bypass your phone’s ringtone and send you pre-recorded messages directly to voicemail. Ringless voicemail is often used for marketing purposes. If you think you’re receiving ringless voicemail calls, you can contact the company calling you and ask them to remove you from their list.

Part 2: Not Clear About the Root Cause? Troubleshoot Directly by Wondershare Dr.Fone

If you’re unsure what’s causing your calls to go straight to voicemail, you can try using the Dr.Fone System Repair tool. This software can scan and repair your phone for any underlying problems, which may fix the issue and get your calls ringing again.

Dr.Fone supports over 1000 Android models, including unlocked Motorola Razr 40 Ultra models and models from carriers like AT&T and Vodafone. It has an intuitive interface and is easy to use, even for beginners. Learn below the steps on how to use Dr.Fone System Repair to fix incoming calls that dial straight to voicemail:

  • Step 1: Download Dr.Fone on your computer, then launch it once installed.

Screensaver Factory, Create stunning professional screensavers within minutes. Create screensavers for yourself, for marketing or unlimited royalty-free commercial distribution. Make screensavers from images, video and swf flash, add background music and smooth sprite and transition effects. Screensaver Factory is very easy to use, and it enables you to make self-installing screensaver files and CDs for easy setup and distribution. Screensaver Factory is the most advanced software of its kind.

safe Downloadsafe & secure

4,118,635 people have downloaded it

  • Step 2: Connect your smartphone to your desktop or computer using a USB cable. Next, from the Toolbox homepage, select System Repair.

dr.fone system repair toolbox

  • Step 3: Select Android as the Motorola Razr 40 Ultra device type.

select device type on dr.fone

  • Step 4: Click Start to begin repairing your smartphone.


Epubor Ultimate for Win:Helps you read books anywhere, including the best eBook Converter + eBook DRM Removal functions.

dr.fone start system repair

  • Step 5: Select the Motorola Razr 40 Ultra device details on the Name, Model, Country, and Carrier drop-down lists. Next, select the agreement checkbox, then click Next to proceed.

/a>

choose device information to repair

  • Step 6: Follow the in-app instructions to enter Download mode on your Motorola Razr 40 Ultra, then click Next.

android devices to enter download mode

  • Step 7: Wait while the app downloads the firmware; once done, click Fix Now.

firmware downloaded ready to use

  • Step 8: Enter the code in the input box to verify the Motorola Razr 40 Ultra device information in the dialogue box, then click Confirm.

confirm device information

  • Step 9: The app will start repairing the system issue on your Motorola Razr 40 Ultra. Once completed, your app should restart, then click Done to close the app.

repaired android device system issue

You May Also Like:

Top 5 Best Android System Repair Apps

How to Fix It: Android Stuck on Boot Screen?

How to Flash Dead Android Phone Safely

Conclusion

When your phone calls go straight to voicemail without ringing, it can be a frustrating and disruptive experience. Not only do you miss important calls from work, friends, or family, but it also leaves you feeling disconnected and out of the loop. As a temporary measure to avoid missing important calls, check your voicemail regularly.

For a prompt solution, consider using Dr.Fone if incoming calls on your phone go straight to voicemail. It is a powerful mobile solution that can also address other system problems, including stuck boot loops, app crashes, black screens, and bricked devices. If you consistently experience this issue, it’s advisable to reach out to a professional for assistance.

SwifDoo PDF Perpetual (2-PC) Free upgrade. No monthly fees ever.

safe Downloadsafe & secure

4,215,287 people have downloaded it


  • Title: Full Solutions to Fix Error Code 920 In Google Play on Motorola Razr 40 Ultra | Dr.fone
  • Author: Ariadne
  • Created at : 2024-07-30 11:08:04
  • Updated at : 2024-07-31 11:08:04
  • Link: https://howto.techidaily.com/full-solutions-to-fix-error-code-920-in-google-play-on-motorola-razr-40-ultra-drfone-by-drfone-fix-android-problems-fix-android-problems/
  • License: This work is licensed under CC BY-NC-SA 4.0.