How to Fix It Tecno Spark 20 Wont Turn On | Dr.fone

How to Fix It Tecno Spark 20 Wont Turn On | Dr.fone

Ariadne Lv13

How to Fix It: Tecno Spark 20 Won’t Turn On

Did your Tecno Spark 20 decide to go on vacation and refuses to turn on? If your Tecno Spark 20 won’t turn on for no apparent reason, finding why it failed to power on and the solution for it is not a fun process.

Here, we hope we are able to give you a checklist of reasons behind this issue and the possible steps you can take to rectify it.

Part 1: Common Reasons That Your Tecno Spark 20 Won’t Turn On

If you cannot find any reason why your Tecno Spark 20 will not switch on, here are some possible reasons:

  1. Your Android phone is simply frozen in power-off or sleep mode. In which case, it fails to switch itself on or wake itself up when you initiate it.
  2. Your phone’s battery may be out of charge.
  3. The operating system or installed software is corrupted. The tell-tale sign if this is that if you manage to switch on your Tecno Spark 20, it freezes or crash soon after.
  4. Your device is clogged up with dust and lint causing the hardware to not work properly.
  5. Your power button is broken , which caused it to not be able to trigger the necessary action needed to power up the Android phone. Check to also see if your connectors have no carbon build-up which will cause your phone to not be charged properly.

Part 2: Rescue Data on Android Phone That Will Not Turn On

If you need some help rescuing data from an Android phone that will not turn on, the Dr.Fone - Data Recovery (Android) will be your best friend in your data recovery attempt. With the help of this data recovery solution, you will be able to intuitively recover lost, deleted or corrupted data on any Android devices. Its flexibility and efficiency in rescuing data make it one of the best software out there.

Note: For now, the tool can rescue data from broken Android only if your phone is earlier than Android 8.0, or rooted.

Dr.Fone - Data Recovery (Android)

World’s 1st data retrieval software for broken Android devices.

  • It can also be used to recover data from broken devices or devices that are damaged in any other way such as those stuck in a reboot loop.
  • Highest retrieval rate in the industry.
  • Recover photos, videos, contacts, messages, call logs, and more.
  • Compatible with Tecno Spark 20 devices.

3981454 people have downloaded it

If your Tecno Spark 20 won’t turn on, here is how you can use the software to recover data:

Step 1: Launch Wondershare Dr.Fone

On your desktop computer or laptop, open Wondershare Dr.Fone. Click on Data Recovery on the left column. Connect your Tecno Spark 20 to the computer using a USB cable.

android phone won't turn on data recovery

Step 2: Decide which file types to recover

On the next window, you will need to check the boxes corresponding to the type of files you can recover from a list. You can get back Contacts, Messages, Call History, WhatsApp messages & attachments, Photos, Audio and more.

android phone won't turn on data recovery

Step 3: Select the problem with your phone

Opt for “Touch screen not responsive or cannot access the phone” or “Black/broken screen”. Click Next to continue.

android phone won't turn on data recovery

Look up for your device – pick the Tecno Spark 20 device Name and Device Model. Advance by clicking on the Next button.

android phone won't turn on data recovery

Step 4: Go into your Tecno Spark 20’s Download Mode.

The data recovery tool will guide you on how you can go into your Tecno Spark 20’s Download Mode. You should be getting a step-by-step guide on your computer.

android phone won't turn on data recovery

Step 5: Scan the Android Phone.

Using the provided USB cable, attach your Tecno Spark 20 to your computer – the data recovery tool should be able to discover your device automatically and scan it for recoverable data.

android phone won't turn on data recovery

Step 6: Review and Retrieve the Data from Broken Android Phone.

Wait for the program to finish scanning the phone – once completed, you will be able to get a list of recoverable files. You can have a preview of the file by highlighting them. Tick the box next to the file name and click on Recover to start retrieving the files and save them in the destination of your choosing.

android phone won't turn on data recovery

Parental Control Software

#1 Rated Parental Control Software.
Monitor & Control all PC Activity!
sentrypc.com/parental-controls/
## Part 3: Android Phone Won't Turn On: **One Click Fix**

After repeated attempts, when your Android mobile/tablet stops buzzing, what options do you have to revive it?

Well, we would recommend picking Dr.Fone - System Repair (Android) to fix an Android phone will not switch problem. This one-click Android system repair tool resolves every Android system issue without any fuss including Android Phone won’t turn on issue.

Dr.Fone - System Repair (Android)

The real fix to issues like “Android phone will not switch on”

  • This tool is aptly effective for all the latest Tecno Spark 20 devices.
  • With a high success rate for fixing Android devices, Dr.Fone - System Repair (Android) ranks at the top.
  • This is a single click application to fix all Android system issues effortlessly.
  • It is the first tool to repair all Android system issues in the industry.
  • It is intuitive and requires no tech expertise to work with.

3981454 people have downloaded it

Prior to fixing the Android phone will not switch and getting things back in action. You need to make sure that you have backed up the Android device . It is recommended that rescuing data from an Android phone by backing up is better than recovering it post the process.

Phase 1: Get the Tecno Spark 20 device ready and connect it

Step 1: Run Dr.Fone on your computer once the installation is complete and tap the ‘Repair’ option form the interface. Now, connect your Android mobile with the computer.

fix Android Phone not turn on by repairing system

Step 2: You will find a range of options, tap on the ‘Android Repair’ one. Hit the ‘Start’ button so that you can proceed to fix Android Phone won’t turn on hassle.

star to fix Android Phone not turn on

Step 3: Now, over the Tecno Spark 20 device information window, ensure to feed your exact device details. Press the ‘Next’ button then on.

go to SMS to export text messages

Phase 2: Enter ‘Download’ mode for fixing your Tecno Spark 20

Step 1: You need to put your Tecno Spark 20 in Download mode for resolving the Android phone will not switch on.

  • For the Tecno Spark 20 device having ‘Home’ button, you got to switch it off and press ‘Volume Down’, ‘Home’, and ‘Power’ keys for 5-10 seconds at once. Let them go and click on the ‘Volume Up’ button to put your phone in ‘Download’ mode.

fix Android Phone not turn on with home key

  • For ‘Home’ button-less device, turn the phone/tablet down first. For 5 – 10 seconds, hold down the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons. Tap on the ‘Volume Up’ button to get into the ‘Download’ mode, after releasing the 3 buttons.

www.sentrypc.com

fix Android Phone not turn on without home key

Step 2: Hitting the ‘Next’ key will allow you to download firmware and proceed with the next step.

download firmware to fix Android Phone not turn on

Step 3: Dr.Fone - System Repair (Android) would verify your firmware download and then take a while to rectify and resolve Android Phone won’t turn on issue.

fixed Android Phone not turn on

Part 4: Android Phone Won’t Turn On: Common Fix

To try fixing an Android Phone that won’t turn on, follow these steps:

  1. For any Android devices, remove the battery (considering the battery of your Tecno Spark 20 can be removed) and leave it out for at least 30 minutes. Put back the battery in and try to turn it on.
  2. Press and hold down the Power and Volume Down buttons at the same time for 15-30 minutes to reboot the Tecno Spark 20 device.
  3. Should the first two steps do not work, charge your Tecno Spark 20 to get it out of the start-up loop. You can also opt to use a different battery, just in case your current battery is the source of the problem.
  4. If there are any connected hardware e.g. SD card, remove them from the Tecno Spark 20 device.
  5. Start your Tecno Spark 20 in Safe Mode by pressing and holding down the Menu or Volume Down button on your device.
  6. Should the first five steps do not work for you, perform a hard reset. Do take note that each device will have a different way to do so and that data that is stored locally on the phone will be deleted.
  7. Send your Tecno Spark 20 to the repair shop should none of these steps work.

Part 5: Useful Tips to Protect Your Tecno Spark 20

There are several reasons as to why your Tecno Spark 20 won’t turn on. The problem could be a hardware or software issue which could be prevented. Here are some useful tips to protect your Tecno Spark 20.

I. Hardware

  • Remember that the components that make your Tecno Spark 20 is sensitive. To protect these components from being damaged, use a good guard casing.
  • Take apart your Tecno Spark 20 and clean it routinely to avoid dust and lint from clogging the phone and overheating it.

II. Software

  • It is recommended to download apps from Google Play Store. This way, you can be sure that your app comes from a trusted source.
  • Read the app’s permission to see which part of the operating system and your personal information that you are giving access to.
  • Install reliable anti-virus and anti-malware software to safeguard your Tecno Spark 20 from malicious attacks.
  • Make sure you update your operating system, software and apps to make sure you have the latest version – the developer may have fixed the bugs that have caused problems on Android phones.

It is important to note that your phone contains some important data. Therefore, when your Tecno Spark 20 won’t turn on do not just give up - there are plenty of tools at your disposal to recover back your files and phone.

How to Fix Error 495 While Download/Updating Android Apps On Tecno Spark 20

Error 495 is a common error that occurs while downloading or updating apps from Google Play Store. This error is usually caused by a problem with the Google Play Store, and it can be fixed by clearing the cache and data of the Google Play Store app. If you are experiencing this error, follow the steps below to fix it.

In this article, you will learn why the Android error 495 pops up, possible solutions to bypass, as well as a dedicated repair tool to radically fix error 495.

We always like to explore every new feature or the features that already exist on our devices. We have a tendency to be the master of our device and want to know every bit of the handset. Unexpected errors ruin that experience and it is just frustrating to experience these errors. And the worst part is that we have no idea where we are wrong or what we did that led to the error. Same is the case with the error 495 which occurs due to downloading or updating of Android Apps. You may have spent countless hours on the internet to find the right solution for error code 495 but even after following many of the most guaranteed steps sometimes the error still doesn’t go away.

However, this article will provide you various methods to get rid of the Error 495 play store problem that you face and you will not have to depend on any other sources for your solution.

Reasons for Google play error 495

Android Apps are most commonly downloaded from the Google Play Store with the help of Wi-Fi or Cellular Data. One may come across many types of errors. Mostly the errors come in during the download or update or installing time. Error 495 occurs when the user isn’t being able to download or install an app over Wi-Fi, but the user is able to do the same thing over cellular data.

Technically speaking, the issue is caused when the connection to the Google Play servers, where the app is hosted, times out. Which is unable to resolve by itself.

Also, there could be another reason that it cannot sync with the servers.

Now that we know the possible reasons for the error 495, let us also know how to get rid of it in the sections below.

Solution 1: One Click to Fix error 495 by Android Repair

Tried several methods to make the error 495 disappear, but nothing works? Well, many people have experienced the same frustration. The root cause is that something is wrong with the Android system. You need to have your Android system repaired to fix error 495 in this situation.

Note: Having your Android system repaired may lose existing data on your Android. Backup the data on your Android before the Android repair.

Dr.Fone - System Repair (Android)

Best tool for fundamental Android repair in one click

  • Fixes all Android system issues like error 495, system UI not working, etc.
  • One click for Android repair. No special technics needed.
  • Supports all the new Tecno Spark 20 devices like Galaxy Note 8, S8, S9, etc.
  • Step-by-step on-screen instructions provided to fix error 495 without any hassle.

3,390,486 people have downloaded it

With Dr.Fone - System Repair (Android) , you can easily fix error 495 in few steps. Here is how:

  1. Download, install, and launch Dr.Fone - System Repair (Android). Connect your Android to your computer with a USB cable.

fix error 495 with Dr.Fone

  1. Select the option “Repair” > “Android Repair”, and click “Start”.

Glarysoft File Recovery Pro - Helps to recover your lost file/data, even permanently deleted data.

start the android repair

  1. Select the Tecno Spark 20 device information like brand, name, model, etc., and confirm your selection by typing in “000000”.

fix error 495 by select device info

  1. Press the stated keys to boot your Android in download mode to download the firmware as instructed.

fix error 495 in download mode

  1. After the firmware is downloaded, the program will automatically start to repair your Android.

fix error 495 automatically

dotConnect for Oracle is an ADO.NET data provider for Oracle with Entity Framework Support.

Solution 2: Clear the Google Service Framework cache to Fix error 495

Step 1:

Go to the “settings” of your device. Once the series of sections comes up, tap on the “APPS” section.

Step 2:

Click on ‘All Apps’ or ‘Swipe to All’ and the open the section named “Google Services Framework App”

fix error 495-clear app cache.

STEP 3:

Open “App Details” and the screen shown in the image should come up on your device. As shown in the image, follow the three steps. First, tap on “Force Stop” and then second, tap on the “Clear Data” option and finally go ahead and tap on the “Clear Cache” option.

Following the above steps should solve your problem of Google Play Error 495. And you can enjoy back to using the apps which you couldn’t download or update due to the Error 495.

Solution 3: Reset App Preference in Google play Store to Fix error 495

STEP 1:

Go to the settings section in your device. It will be differently placed for different devices and different users.

fix error 495-settings

STEP 2:

Once the Settings section is open. A lot of further sections will pop up. No find the section named “Application Manager” or “Apps”. After locating it, tap on that section.

![fix error 495-application](https://images.wondershare.com/drfone/article/2017/05/14953043162812.jpg)

STEP 3:

Now go ahead and tap or slide to a section named “ALL”.

STEP 4:

After reaching the “ALL” section tap the touch button to open menu/properties and choose an option named “Reset Apps” or “Reset App Preferences”.

There’s no need to be alarmed because on clicking the reset option, the apps won’t be deleted but it is only going to re-set them. And hence solving the Error 495 created in the Google Play.

fix error 495-application manager

Solution 4: Fix Error Code 495 by installing a VPN app

The Error code 495 can be easily removed in another interesting way too. On downloading a Virtual Private Network (VPN) and then operating the play store automatically solves the error 495.

STEP 1:

Install Hideman VPN (using any other VPN will also make it work) from Google Play store. (If the error persists for this app too then download it from a different app store or by using a third-party store).

STEP 2:

Now open the app and select the United States as the country of connection and press the option named Connect.

STEP 3:

Open Google Play Store and Download any app without the Error Code 495 coming in and bothering.

This fix will work for most of the Google Play Errors and not just only The Error Code 495.

Solution 5: Remove your Google Account & Reconfigure it to fix error 495

Removing the Google account and re-configuring it is a very common method adopted to get rid of the Error 495. Adopt the following steps to complete this method.

STEP 1:

Go to the “Settings” section of your device. Like it was mentioned before, different devices and different users will have the placement of the settings section in a different place.

fix error 495-settings

STEP 2:

Go to the accounts section in the settings tab.

OtsAV Radio Webcaster

fix error 495-accounts

STEP 3:

In the accounts section tap on the Google Account part

STEP 4:

Inside The Google section, there’ll be an option called “Remove Account”. Tap on that section, to remove your google account.

fix error 495-remove account

STEP 5:

Now go ahead and re-enter/ re-register your Google account and check if the Error 495 still persists.

Now you have completed all the steps and your problem should be solved.

Solution 6: Fix error code 495 by Removing your Google Play Store Data & Cache

One of the best and most accurate methods in the series of various steps in eradicating the Error Code 495 in Google Play Store is by removing the Google play Store Data and Cache. In order to do so follow the steps mentioned below. After following the steps it is guaranteed that the Error code 495 will be done with and you won’t experience any such problems in the future.

STEP 1:

Go to the “Settings” section into your mobile device. The settings can be accessed by scrolling down and pulling down the drop-down menu and most likely the settings app will be on the top-right corner. Otherwise, it will be found after opening the app drawer.

fix error 495-settings

STEP 2:

Once after opening the settings section, select the “Installed apps” or the “Apps” section.

LYRX is an easy-to-use karaoke software with the professional features karaoke hosts need to perform with precision. LYRX is karaoke show hosting software that supports all standard karaoke file types as well as HD video formats, and it’s truly fun to use.
LYRX Karaoke Software MAC/WINDOWS (Includes Activation For 3 Machines)

fix error 495-installed apps

STEP 3:

Find the “Google Play Store” section and select that too.

STEP 4:

Tap on the “Clear data” & “Clear Cache”.

fix error 495-clear app cache

Doing the above steps will clear your caches of the Google Play Store. Now you have a new google Play store.

Hence in this article, we got to know about the error 495 and the possible solutions to it as well. Also, this article explains how Error code 495 can be removed by 5 different ways. These are the best ways by which you can remove or get rid of the Error Code 495. In case one of the method fails, use the other one to rectify this recurring error 495 on your Tecno Spark 20.

Why Does My Tecno Spark 20 Keep Turning Off By Itself? 6 Fixes Are Here

Android users are usually very happy with their smartphones; however, sometimes they do complain about their phones switching off abruptly. This is a weird situation to be in because one moment you are using your phone, and the next moment it suddenly turns itself off, and when you happen to turn it back on, it functions smoothly, but only for a while.

Phones shutting off problem not only disrupts your work but also tests your patience if you are in the middle of executing an important task, playing your favorite game, typing an e-mail/message, or attending a business call, etc.

We often hear Android users ask for solutions for this problem at different forums. If you are one of them and clueless about why My Tecno Spark 20 keeps shutting off, here are ways that can help you.

So the next time you ask, “Why does My Tecno Spark 20 keep shutting off?”, refer to this article and follow the techniques given hereunder.

Part 1: Possible reasons for phone turning off by itself

We understand your trouble when you ask, “Why does My Tecno Spark 20 keep turning off?” thus, here we have four of the possible reasons that might be causing the glitch and help you understand the problem better.

The first one is related to updating the phone’s software or any of the Apps if the download process is interrupted and not duly completed, the phone can act abnormally causing it to switch off at frequent intervals.

Then there are certain Applications that are not supported by the Android software. While using such Apps, the phone may turn off abruptly. This usually happens when you install Apps from unknown sources which are not compatible with Android.

Also, if your battery is low or has become too old, your phone may shut off and not work as smoothly.

Lastly, you can also check if you use a protective cover for your phone. Sometimes, the cover is so tight that it presses the power button continuously turning the phone off.

Now, once you have analyzed the problem, it is easier to move on to the solutions.

PCDJ DEX 3 for Windows & MAC is the total entertainment DJ software solution, offering audio, video, and karaoke mixing ability. Automatic beat-sync, smart looping, 4 decks, DJ MIDI controller support, Karaoke Streaming and much more.
DEX 3 meets the demands of today’s versatile DJ, without compromise!
DEX 3 (Audio, Video and Karaoke Mixing Software for Windows/MAC | 3 Activations and Free Updates)

Part 2: Check the battery status on Android

If your phone turns off now and then while you are using it and even refuses to start when you press the power button, we suspect that there is a problem with your phone’s battery. Well, Luckily for Android users, there is a test that can be run on the phone to check the battery’s operations and health. Not many users are aware of it, and thus, we have compiled what you need to do the next time you wonder why does My Tecno Spark 20 keeps shutting off itself.

First, open the dialer on your Tecno Spark 20 shown in the screenshot below.

open the dialer

Now dial *#*#4636#*#* just like dialing a usual phone number and wait for the “Battery Info” screen to pop up.

Note: Sometimes, the above-mentioned code may not work. In such cases, try dialing *#*#INFO#*#*. The following screen will appear now.

Battery Info

If the battery looks good as you can see in the screenshot above and everything else seems normal, it means that your battery is healthy and need not be replaced. You may now move on to the next step to cure your device.

Part 3: One-click to fix Android phone keeps turning off

We understand how annoying it is to find your Tecno Spark 20 turning off randomly on its own. So, when the age-old remedies to fix the phone keeps turning off turns futile, you need to go for a reliable tool like Dr.Fone - System Repair (Android) .

Apart from tackling the Android phone keeps turning off the issue, it can also resolve all Android problems. The issues include system update fail, device stuck on logo, unresponsive, or bricked device with a blue screen of death.

Your trouble with ‘why does My Tecno Spark 20 keep shutting off?’ can be resolved easily using Dr.Fone - System Repair (Android). But, before that, you need to ensure that the Android device has been backed up properly to eliminate the risk of data erasing.

dr.fone wondershare

BLUETTI NEW LAUNCH AC240

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

  • Fix your Android to normal, no skills required.
  • Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
  • The high success rate in resolving Android system issues.
  • Compatible with a wide range of Android devices and OS versions
  • User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

Below are the steps that help easily fix Android device keeps turning off on its own:

Phase 1: Preparing your Tecno Spark 20 and connecting it

Step 1: On your computer, install and launch Dr.Fone. Now, click the ‘System Repair’ button over Dr.Fone window and connect the Android device to your computer.

fix phone keeps turning off

Step 2: Here, you need to press the ‘Start’ button right after hitting the ‘Android’.

Jet Profiler for MySQL, Enterprise Version: Jet Profiler for MySQL is real-time query performance and diagnostics tool for the MySQL database server. Its detailed query information, graphical interface and ease of use makes this a great tool for finding performance bottlenecks in your MySQL databases.

choose repair to fix phone keeps turning off

Step 3: Pick your Tecno Spark 20 details over the Tecno Spark 20 device information interface. Click the ‘Next’ button afterward.

Forex Robotron Basic Package

start to fix phone keeps turning off

Phase 2: Enter ‘Download’ mode to repair and resolve ‘why does My Tecno Spark 20 keep turning off’

Step 1: On your Tecno Spark 20, go to ‘Download’ mode following the instructions.

For a device with the ‘Home’ button – Turn off the mobile and then hold down the ‘Home’, ’Volume Down’, and ’Power’ buttons together nearly for 10 seconds. Leave them all and then click the ‘Volume Up’ button to get into the ‘Download’ mode.

fix phone keeps turning off with home key

For a device lacking ‘Home’ button – After switching off the Android mobile, hold down ‘Bixby’, ‘Power’, ‘Volume Down’ key still 10 seconds. Now, un-hold them and tap the ‘Volume Up’ button to enter the ‘Download’ mode.

KoolReport Pro is an advanced solution for creating data reports and dashboards in PHP. Equipped with all extended packages , KoolReport Pro is able to connect to various datasources, perform advanced data analysis, construct stunning charts and graphs and export your beautiful work to PDF, Excel, JPG or other formats. Plus, it includes powerful built-in reports such as pivot report and drill-down report which will save your time in building ones.

It will help you to write dynamic data reports easily, to construct intuitive dashboards or to build a whole business intelligence cockpit.

KoolReport Pro package goes with Full Source Code, Royal Free, ONE (1) Year Priority Support, ONE (1) Year Free Upgrade and 30-Days Money Back Guarantee.

Developer License allows Single Developer to create Unlimited Reports, deploy on Unlimited Servers and able deliver the work to Unlimited Clients.

fix phone keeps turning off with no home key

Step 2: Hitting the ‘Next’ button will start the Android firmware download.

start firmware downloading

Step 3: Now, Dr.Fone - System Repair (Android) will verify the firmware once downloaded. Within some time the Android system gets repaired.

fixed phone keeps turning off with the repair program

OtsAV DJ Pro

safe Downloadsafe & secure

Part 4: Update software to the latest version to fix Android phone keeps turning off

Software glitches or outdated operating systems can trigger automatic shutdowns on Android phones. Updating your Tecno Spark 20’s software version can be an effective solution to fix the issue of the phone repeatedly turning off. Regular software updates provided by the phone manufacturer often include bug fixes, performance improvements, and security patches. These updates can address underlying problems that may be causing the random shutdowns, ensuring a more stable and reliable phone performance.

To update the software on your Tecno Spark 20, follow these steps:

Go to “Settings” on your Tecno Spark 20 and navigate to the “System” or “Software Update” section (the exact wording may vary depending on your device model and Android version). Look for the option to “Check for updates” to see if any new software updates are available.

update software

Part 5: Cool down your phone to avoid your phone keeps turning off

When a phone overheats, it can trigger an automatic shutdown as a protective mechanism to prevent damage to the Tecno Spark 20 device’s internal components. Overheating occurs when the phone’s internal temperature rises significantly, typically due to excessive heat generated by the processor and other hardware components during intensive tasks or prolonged usage.

To prevent the phone from turning off due to overheating, you can take various measures, such as limiting intensive usage, avoiding direct sunlight and hot environments, and using the phone on hard surfaces to aid heat dissipation.

cool down the phone

Part 6: Narrow down the randomly turning off issue in Safe Mode

Starting your phone in Safe Mode is a good way to narrow down whether or not the problem is occurring because of some heavy and incompatible Apps as Safe Mode allows only built-in Apps to function. If you can use your phone in Safe Mode, consider deleting the unnecessary Apps which may be burdening the phone’s processor.

To boot into Safe Mode:

Long press the power button to see the following options on the screen.

device options

Now tap on “Power Off” for about 10 seconds and click “OK” on the message that pops-up as shown below.

safe mode

Once done, the phone will reboot and you will see “Safe Mode” on the main screen.

safe mode

That’s all. Well, booting to Safe Mode is easy and it also helps you to identify the real problem.

Part 7: Back up your data and perform a factory reset

Note: You must take a back-up of all your data because once you perform a factory reset on your device, all media, contents, data, and other files are wiped out, including your device settings.

Wondershare Dr.Fone is a great way to back up all your data to prevent it from getting lost after resetting the phone. It works brilliantly as it backs up all data and allows users to retrieve it fully or selectively. You can backup all files from your Android to PC in just a click and restore them later. Try this software for free before purchasing it to understand it’s working better. It does not tamper with your data and only requires you to follow the simple steps given below to backup your Android data:

Wondershare Dr.Fone

Flexibly Back up and Restore Android Data

  • Back up Android data to the computer with one click.
  • Preview and selectively restore the backup to any Android device.
  • Supports 8000+ Android devices.
  • There is no data lost during backup, export, or restoration.

3,981,454 people have downloaded it

To start with, download and run the backup software on the PC.

Once you have the main screen of the software with multiple options that will appear before you, choose the “My Backup” option.

EmEditor Professional (Lifetime License, non-store app)

choose “Data Backup & Restore” option

Now connect the Android phone to the PC and make sure that USB debugging is turned on. Then hit “Back Up Now” and wait for the next screen to open.

connect

You will see the file types that will be backed up. Wait for the backup process to complete.

vMix Pro - Software based live production. vMix Pro includes everything in vMix 4K plus 8 channels of Replay and 8 vMix Call
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

select the files

There you go, you have successfully backed up data.

select the files

safe Downloadsafe & secure

Now moving on to factory reset your phone:

Simply visit “Settings” on your Tecno Spark 20 by clicking the settings icon as shown below.

visit “Settings”

And then select the “Backup and Reset” option.

select “Backup and Reset”

Once selected, tap on “Factory data reset” and then “reset device” as shown in the picture below.

Finally, tap on “ERASE EVERYTHING” as shown below to Factory Reset your device.

Any DRM Removal for Mac: Remove DRM from Adobe, Kindle, Sony eReader, Kobo, etc, read your ebooks anywhere.

tap on “ERASE EVERYTHING”

Note: Once the factory reset process is complete, your device will automatically restart and you will have to set it up once again. You can restore the backup data on your Tecno Spark 20 once you factory reset it, again using the Dr.Fone toolkit.

Now for all those of you who are wondering why does My Tecno Spark 20 keeps turning off by itself, please understand that the reasons behind the problem are simple, and so are its fixes. All you need to do is examine the problem carefully and move on to the fixes given in this article. Dr.Fone toolkit Android Data Backup & Restore feature provides an excellent platform for you to store all your data safely on your PC and retrieve it whenever you like so that you can go ahead to solve the error yourself without stressing about data loss.“Why does My Tecno Spark 20 keep shutting off?” might be common questions but can be dealt with ease if you follow the methods explained above.

So, do not hold back, go ahead, and try these tricks. They have helped many and will be useful for you too.

safe Downloadsafe & secure


  • Title: How to Fix It Tecno Spark 20 Wont Turn On | Dr.fone
  • Author: Ariadne
  • Created at : 2024-07-30 13:10:58
  • Updated at : 2024-07-31 13:10:58
  • Link: https://howto.techidaily.com/how-to-fix-it-tecno-spark-20-wont-turn-on-drfone-by-drfone-fix-android-problems-fix-android-problems/
  • License: This work is licensed under CC BY-NC-SA 4.0.
On this page
How to Fix It Tecno Spark 20 Wont Turn On | Dr.fone