How to Fix the Soft Bricked Itel S23+?

Bricked phone is a serious problem, as your brick smartphone could be suffering from a soft brick or hard brick problem, and must be dealt with carefully. It is very common to see a brick smartphone these days. If you are wondering what exactly is a bricked phone, here is your answer.

A bricked phone, hard brick or soft brick, is a smartphone which refuses to start or boot all the way up the home/main screen of the Itel S23+ device. This issue is observed within most Android phones because users have a tendency to tamper with the Itel S23+ device settings, flashing new and customized ROMs and tweaking with the essential files. Playing around with the phone’s internal set-up leads to such errors, worst of them being a brick smartphone. Usually, a bricked phone does not switch on and stays frozen at the Itel S23+ device logo, a blank screen or even worse, doesn’t respond to any command, even the power on command.

If you are confused about the soft brick and hard brick problems and looking for solutions to fix your priced phone, then here is all you need to know.

Read on to find out more.

Part 1: What is the difference between soft brick and hard brick?

To begin with, let us understand the basic difference between a soft brick and hard brick issue. Both versions of a bricked phone prevent it from booting but differ in their causes and gravity of the problem.

A soft-brick problem is caused merely by a software error/crash and makes your device switch on automatically every time you manually turn it off. This phenomenon is referred to as Boot Loop. Soft bricked Android phones are not as difficult to fix as the hard bricked Android phones. It is convenient to say that a soft bricked phone only boots up half-way and not fully, whereas a hard bricked device does not switch on at all. A hard brick error is thus caused when the kernel, which is nothing but an interface for the software to communicate with the hardware, is tampered with. A hard bricked phone is not recognized by your PC when plugged in and is a serious problem. It requires troubleshooting techniques and cannot be easily fixed as the soft brick problem.

Hard bricked phones are a rare sight, but the soft brick is very common. Given below are ways to fix a soft brick Android phone. The techniques listed here are the best and the most efficient ways to get your phone back to its normal working conditions without losing your important data or damaging your device or its software.

Part 2: Stuck at the Boot Loop

This is the first sign of a soft bricked Android phone. Boot Loop is nothing but when your phone does not remain switched off and turns itself on automatically, and freezes at the logo screen or blank screen, every time you manually try to power it off.

Stuck at boot loop problem can be fixed by clearing your Cache partitions. These partitions are nothing but storage locations for your modem, kernels, system files, drivers and built-in Apps data.

It is advisable to clear Cache partitions regularly to keep your phone free from such glitches.

Since the phone refuses to boot, Cache can be cleared from entering into the Recovery Mode. Different Android devices have different ways to put it in recovery mode. Normally pressing the power key and volume down key helps, but you may refer to your phone’s guide for better understanding and then follow the steps given below to clear the cache partition:

Once you are the recovery mode screen, you will see a number of options as shown in the screenshot.

Use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

>

After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you erase all the clogged up and unwanted files. You may loose some App related data, but that is a small price to pay to fix your bricked phone.

If this method does not boot up your brick smartphone and the problem still persists, there are two more things you can try. Read ahead to find out about them.

Part 3: Booting straight into recovery mode

If your bricked phone does not boot up to your Home Screen or Lock screen and instead boots directly into Recovery Mode, there is not much left to do. Booting straight into recovery mode is undoubtedly a soft brick error but it also indicates a possible problem with your current ROM. The only option you have to flash a new ROM to reboot your bricked phone back to its normal functioning.

To flash a new ROM:

Firstly, you must root your phone and unlock the Bootloader. Every phone’s mechanism to unlock the bootloader is different, thus, we suggest to refer to your user manual.

Once the Bootloader is unlocked, take a backup of all your data by selecting “Backup” or “Android” back in recovery mode. The process should not take long and all you need to do is tap “OK” to config backup.

In this step, download a ROM of your choice and store it in your SD Card. Insert the SD Card in your phone to begin the flashing process.

Once at the recovery mode, select “Install Zip from SD Card” from the options.

Scroll down using the volume key and use the power key to select the downloaded ROM.

This might take a few minutes of your time, but once the process is complete, reboot your phone.

Hopefully, your bricked phone will not boot normally and work smoothly.

Part 4: Booting straight into Bootloader

If your bricked phone boots straight into Bootloader, then this a serious issue and must not be taken lightly. Flashing a new ROM or clearing cache partitions are of little help in such a brick smartphone situation. Booting straight into Bootloader is a peculiar soft bricked Android phone feature and can be tackled only by downloading and flashing your original ROM from the manufacturer. In order to do so, a detailed study about your manufacturer’s ROM, ways to download and flash must be carried out. Since different Android phones come with different types of ROMs, it difficult to cover all the aspects about the different types of ROMs.

Brick smartphone problem has become more prominent than phone freezing or hanging issue. Android users are often seen looking for solutions to fix their soft brick and hard brick phones. Android phones are prone to get bricked and thus, it is important for us to know about the three techniques given above. These methods have been tried, tested and recommended by ay affected bricked phone users. Therefore, these tips are reliable and worth a try. So if your phone acts stubborn and refuses to boot normally, examine the problem carefully and adopt one of the solutions given above which best suits your situation.

How to Fix Android.Process.Media Has Stopped on Itel S23+

Like any other technological system, Android is not without its fair share of problems. One of the most common issues that Android users face is the android.process.media error. If you have encountered this problem lately, you don’t need to worry, this article will clearly explain what exactly causes this error and how to fix it safely.

Part 1. Why this error pops up?

There are several reasons why this error can occur repeatedly and it is worth noting the various reasons why this happens so that you can avoid the problem in the future. Some of the most common ones include:

• 1. Moving from one custom ROM to another can cause this error to occur
• 2. A failed firmware upgrade may also be to blame
• 3. A virus attack can also result in this error among many others
• 4. Restoring apps via a Titanium backup is also a major cause
• 5. Failure of certain apps such as the download manager and the media storage

Part 2. Back up your Android Data First

It is always a good idea to back up your data especially before embarking on any attempt to fix any problem with your device. This way you will always have your data with you just in case something goes wrong and you lose all your data. Wondershare Dr.Fone will help you easily back up your Itel S23+. The application will allow you to back up your device with a few clicks and you can restore what you want from your backup .

Wondershare Dr.Fone

Flexibly Back up and Restore Android Data

• One-click to back up Android data to the computer.
• Preview and selectively restore the backup to any Android device.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restore.

4,503,800 people have downloaded it

Follow the steps below to learn how to back up your phone in steps.

Step 1. Download, install, and run the program

Click the “Start Download” button above to get the software installed on your computer. Then run it. The primary window of the software looks like below.

Step 2. Connect your device

Then connect your Itel S23+ to the computer and make sure that it can be recognized by your computer. Then click on “My Backup” on Dr.Fone.

Step 3. Begin to backup

When your device is displayed on the window of the program, click “Back Up Now “ to begin. The rest will be done by the program.

safe & secure

Part 3. How to Fix “Android. Process. Media” Error

With a full backup of your Itel S23+, you can now embark on a mission to fix the error. There are several methods to clear this error. We have outlined three of the most effective solutions here.

Method 1: Ensure app and system updates

Updates often include patches for known issues and vulnerabilities. Ensuring that both apps and the system are up to date can resolve many potential problems.

Step 1: Visit the Google Play Store to check for available app updates.

Step 2: In “Settings,” go to “System” > “Software Update” to check for system updates.

Method 2: Reset app preferences

App preference settings might sometimes lead to conflicts or anomalies. Resetting these settings can revert apps to their default state, resolving potential issues.

Step 1: Go to “Settings” on your device.

Step 2: Access “Apps.”

Step 3: Tap the menu icon in the upper-right corner and select “Reset App Preferences.”

Method 3: Clear the cache and data on your device

Step 1: Go to Settings> Applications> Manage Applications and find the Google Services framework.

Step 2: Next, find Google Play from the same Manage Applications page.

Step 3: Tap on it and then Tap on clear cache.

Step 4: Press the back button to go back to the Google Services framework and then choose Force stop > clear cache > OK

Step 5: Next you need to open Google Play and when presented with an error, click OK

Step 6: Turn off the Itel S23+ device and then turn it back on. Go to the Google Services framework again and turn it on to see if the issue has been resolved.

Method 4: Check Google Sync & Media Storage settings

Step 1: Go to Settings > Accounts and Personal> Google Sync and uncheck all the checkboxes to stop the Google Synchronization.

Step 2: Disable and Clear all Media Storage data by going to Settings> Apps> All Apps. Find the Media Storage> Clear Data> Disable

Step 3: Use the same method as above to clear the Download Manager data

Step 4: Turn off your device and then turn it on

This Should clear the error message for good.

Method 5: Boot your device into safe mode

Safe mode can temporarily disable third-party apps, allowing only core system apps. This detects if a third-party app causes the “Android process media keeps stopping” error. If the problem disappears in safe mode, a third-party app might be the cause. Uninstalling it can restore normal function. If the problem persists in safe mode, a deeper system issue might exist, needing further investigation or support.

Method 6: Fix the error by using a dedicated repair tool

Dr.Fone - System Repair (Android)

Fix Android process media has stopped issue in one click

• Fix all Android system issues like black screen of death, won’t turn on, system UI not working, etc.
• Industry’s 1st tool for one-click Android repair. Without any data loss.
• Supports all the new Itel S23+ devices like Galaxy S8, S9, S22, etc.
• Step-by-step instructions provided. No technical skills required.

4,989,253 people have downloaded it

Step 1. Connect your Itel S23+

After launching Dr.Fone, click on “System Repair” from the main window.

Then connect your Itel S23+ with the correct cable and choose “Android” > click “Start”.

In the Itel S23+ device information interface, remember to select the correct information. Then confirm the warning and click “Next”.

To confirm the Android repair may erase all data on your device, you need to type in “000000” to proceed.

Step 2. Repair your Itel S23+ in Download mode.

Read and follow the guide here to boot your Itel S23+ in Download mode.

Then click “Next” to start downloading the firmware.

It may take a while, so you could have a cup of coffee to wait for the repair process completed.

safe & secure

Method 7: Factory Reset your device

If the above steps fail, you might need to perform a factory reset. A factory reset restores the Itel S23+ device to its initial state, which can eliminate many problems, but it will also erase all data. Ensure you back up your important data before proceeding.

Method 8: Seek Manufacturer Support

If the problem persists after trying the above steps, it could be related to specific device or software issues. It’s advisable to contact your device manufacturer’s support team for more detailed guidance and assistance.

It is our hope that when faced with this fairly common error, you will not panic. This is a fairly mild issue that can easily be fixed as we have seen above.

safe & secure

How to Exit Android Factory Mode On Itel S23+?

You’ve often heard that recovery mode will solve just about any problem your Itel S23+ is experiencing. This is mostly true and one of the components of Android’s recovery mode, factory mode or factory reset is one of the most efficient ways to solve various problems on your device. While factory mode is often a good thing, there are times when your device can enter factory mode on its own. Other times, you can safely enter factory mode but not know how to get out.

Fortunately for you, this article will explain all aspects of factory mode and especially how to safely exit factory mode.

Part 1. What is Android Factory Mode?

Factory mode or what is commonly known as factory reset is one of the options available for you when your Itel S23+ is in recovery mode. Several options are available for you once you enter Recovery mode on your device but few are as effective as the wipe data/ factory reset option. This option is useful in solving a whole host of problems that your device could be experiencing.

If you have been using your Itel S23+ for a while now and its performance to be less than ideal, a factory reset might be a good solution. That is however not the only problem a factory reset or factory mode can solve. It will also work for a number or Android errors that you may experience, problems caused by faulty firmware updates and also tweaks made on your device that may not have worked as expected.

It is however important to note that a factory reset or factory mode does often result in the loss of all your data. Therefore a backup is necessary to protect against this data loss risk.

Part 2. Backup your Android Device First

Before we can see how to safely enter and exit factory mode, it is important to have a full backup of your device. We mentioned that a factory mode will likely erase all the data on your device. A backup will ensure that you can get your phone back to its original state before the factory mode.

In order to do a full and complete backup of your device you need to have a tool that will not only ensure that you backup everything on your device but one that makes it easy for you to accomplish this. One of the best tools in the market is Dr.Fone - Backup & Resotre (Android) . This software is designed to enable you to create a full backup of your device.

Dr.Fone - Backup & Restore (Android)

Flexibly Backup and Restore Android Data

• Selectively backup Android data to computer with one click.
• Preview and restore backup to any Android devices.
• Supports 8000+ Android devices.
• There is no data lost during backup, export or restore.

3,428,803 people have downloaded it

Follow these very simple steps to use this MobileTrans Phone Transfer software to create a full backup of your device.

Step 1. Launch Dr.Fone on your computer and choose “Backup & Restore”

Run the software on your computer and you can see all features displayed in the primary window. Choose this one: Backup & Restore. It allows you to get your device backed up entirely with one click.

Step 2. Plug in with your device

Then plug in with your device to the computer. When your devic is detected, click on Backup.

Step 3. Select the file types to backup

The program will display all the file types it can support to backup. Just select the ones you would like to backup and hit Backup.

Step 4. Start backing up your device to the computer

After choosing the file’s type for backup, click “Backup” to begin backing up your device to your computer. It will take you a few minutes, depending on the storage of the data.

Note: You can use the feature of “Restore From Backup” to restore the backup file to your device, when you have the need later.

Part 3: One Click Solution to fix Android stuck in factory mode

From the above parts, you are well aware about what is factory mode. As we discussed, this mode fixes most troubles with Android devices.

But for situations when your Itel S23+ gets stuck in this very same factory mode, the most feasible solution for you is Dr.Fone - System Repair (Android) . This tool fixes all Android system issues including unresponsive or bricked device, stuck on Itel S23+ logo or factory mode or blue screen of death with a single click.

Dr.Fone - System Repair (Android)

One click fix to Android stuck in factory mode

• You can easily fix your Android stuck in factory mode with this tool.
• The one-click solution’s ease of operation is appreciable.
• It has carved a niche being the first Android repair tool in the market.
• You don’t need to be a pro in technology to use this program.
• It is compatible with all latest Itel S23+ devices like Galaxy S9.

3,645,867 people have downloaded it

In this part we will explain how to exit Android recovery mode using Dr.Fone - System Repair (Android) . Prior to proceeding, you got to remember that device backup is paramount to keep your data safe. This process might erase your Itel S23+ data.

Phase 1: Ready your device and connect it

Step 1: Installation completion needs to be followed by running Dr.Fone on your system. Over the program window, tap ‘Repair’ afterwards and get the Android device connected.

Step 2: Select the ‘Android Repair’ option from the list to fix Android stuck in factory modeissue. Hit the ‘Start’ button soon after.

Step 3: Select Android device details on the Itel S23+ device information window, followed by tapping the ‘Next’ button.

Step 4: Enter ‘000000’ for confirmation then proceed.

Phase 2: Get in ‘Download’ mode for repairing the Android device

Step 1: It’s important to put the Android device in ‘Download’ mode, here are the steps to do so –

• On a ‘Home’ button-less device – turn off the Itel S23+ device and push down the ‘Volume Down’, ‘Power’ and ‘Bixby’ buttons for about 10 seconds and un-hold. Now, hit the ‘Volume Up’ button to get into ‘Download’ mode.

• For a device with ‘Home’ button – switch it off and hold down the ‘Power’, ‘Volume Down’ and ‘Home’ buttons together for 10 seconds and release. Click the ‘Volume Up’ button for entering ‘Download’ mode.

Step 2: Press ‘Next’ for initiating firmware downloading.

Step 3: Dr.Fone –Repair (Android) starts Android repair as soon as download and verification of firmware is done. All Android issues along with Android stuck in factory mode will be fixed now.

Part 4. Common Solutions to Exit Factory Mode on Android

Having a backup of all your data will eliminate the risk of losing any of your data. You can now safely exit factory mode using one of the 2 methods below. These two methods will work on a rooted device.

Method 1: Using “ES File Explorer”

To use this method, you will need to have installed file explorer on your device.

Step 1: Open “ES File Explorer” and then press the icon on the top left corner

Step 2: Next, go to “Tools” and then turn on “Root Explorer”

Step 3: Go to Local> Device> efs> Factory App and then open factorymode as text in the “ES Note Editor” Turn it ON

Step 4: Open keystr as text in the “ES Note Editor” and change it to ON. Save it.

Step 5: Reboot the Itel S23+ device

Method 2: Using Terminal Emulator

Step 1: Install Terminal emulator

Step 2: Type “su”

Step 3: Then Type the following;

rm /efs/FactoryApp/keystr

rm /efs / FactoryApp/ Factorymode

Echo –n ON >> / efs/ FactoryApp/ keystr

Echo –n ON >> / efs/ FactoryApp/ factorymode

chown 1000.1000/ efs/FactoryApp/keystr

chown 1000.1000/ efs/FactoryApp/ factorymode

chmod 0744 / efs/FactoryApp/keystr

chmod 0744 / efs/ FactoryApp/ factorymode

reboot

You can also exit factory mode on unrooted device by going to Settings> Application manager> All and the search for Factory Test and “Clear Data”, “Clear Cache”

As much as factory mode can be a useful solution to a number of problems, it can be quite annoying when it pops up unexpectedly. Now you are equipped with 2 effective solutions to help you safely exit factory mode if ever you find yourself in this situation.

Also read: