How to Fix the Soft Bricked Motorola Moto G13?

Bricked phone is a serious problem, as your brick smartphone could be suffering from a soft brick or hard brick problem, and must be dealt with carefully. It is very common to see a brick smartphone these days. If you are wondering what exactly is a bricked phone, here is your answer.

A bricked phone, hard brick or soft brick, is a smartphone which refuses to start or boot all the way up the home/main screen of the Motorola Moto G13 device. This issue is observed within most Android phones because users have a tendency to tamper with the Motorola Moto G13 device settings, flashing new and customized ROMs and tweaking with the essential files. Playing around with the phone’s internal set-up leads to such errors, worst of them being a brick smartphone. Usually, a bricked phone does not switch on and stays frozen at the Motorola Moto G13 device logo, a blank screen or even worse, doesn’t respond to any command, even the power on command.

If you are confused about the soft brick and hard brick problems and looking for solutions to fix your priced phone, then here is all you need to know.

Read on to find out more.

Part 1: What is the difference between soft brick and hard brick?

To begin with, let us understand the basic difference between a soft brick and hard brick issue. Both versions of a bricked phone prevent it from booting but differ in their causes and gravity of the problem.

A soft-brick problem is caused merely by a software error/crash and makes your device switch on automatically every time you manually turn it off. This phenomenon is referred to as Boot Loop. Soft bricked Android phones are not as difficult to fix as the hard bricked Android phones. It is convenient to say that a soft bricked phone only boots up half-way and not fully, whereas a hard bricked device does not switch on at all. A hard brick error is thus caused when the kernel, which is nothing but an interface for the software to communicate with the hardware, is tampered with. A hard bricked phone is not recognized by your PC when plugged in and is a serious problem. It requires troubleshooting techniques and cannot be easily fixed as the soft brick problem.

Hard bricked phones are a rare sight, but the soft brick is very common. Given below are ways to fix a soft brick Android phone. The techniques listed here are the best and the most efficient ways to get your phone back to its normal working conditions without losing your important data or damaging your device or its software.

Part 2: Stuck at the Boot Loop

This is the first sign of a soft bricked Android phone. Boot Loop is nothing but when your phone does not remain switched off and turns itself on automatically, and freezes at the logo screen or blank screen, every time you manually try to power it off.

Stuck at boot loop problem can be fixed by clearing your Cache partitions. These partitions are nothing but storage locations for your modem, kernels, system files, drivers and built-in Apps data.

It is advisable to clear Cache partitions regularly to keep your phone free from such glitches.

Since the phone refuses to boot, Cache can be cleared from entering into the Recovery Mode. Different Android devices have different ways to put it in recovery mode. Normally pressing the power key and volume down key helps, but you may refer to your phone’s guide for better understanding and then follow the steps given below to clear the cache partition:

Once you are the recovery mode screen, you will see a number of options as shown in the screenshot.

Use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

>

After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you erase all the clogged up and unwanted files. You may loose some App related data, but that is a small price to pay to fix your bricked phone.

If this method does not boot up your brick smartphone and the problem still persists, there are two more things you can try. Read ahead to find out about them.

Part 3: Booting straight into recovery mode

If your bricked phone does not boot up to your Home Screen or Lock screen and instead boots directly into Recovery Mode, there is not much left to do. Booting straight into recovery mode is undoubtedly a soft brick error but it also indicates a possible problem with your current ROM. The only option you have to flash a new ROM to reboot your bricked phone back to its normal functioning.

To flash a new ROM:

Firstly, you must root your phone and unlock the Bootloader. Every phone’s mechanism to unlock the bootloader is different, thus, we suggest to refer to your user manual.

Once the Bootloader is unlocked, take a backup of all your data by selecting “Backup” or “Android” back in recovery mode. The process should not take long and all you need to do is tap “OK” to config backup.

In this step, download a ROM of your choice and store it in your SD Card. Insert the SD Card in your phone to begin the flashing process.

Once at the recovery mode, select “Install Zip from SD Card” from the options.

Scroll down using the volume key and use the power key to select the downloaded ROM.

This might take a few minutes of your time, but once the process is complete, reboot your phone.

Hopefully, your bricked phone will not boot normally and work smoothly.

Part 4: Booting straight into Bootloader

If your bricked phone boots straight into Bootloader, then this a serious issue and must not be taken lightly. Flashing a new ROM or clearing cache partitions are of little help in such a brick smartphone situation. Booting straight into Bootloader is a peculiar soft bricked Android phone feature and can be tackled only by downloading and flashing your original ROM from the manufacturer. In order to do so, a detailed study about your manufacturer’s ROM, ways to download and flash must be carried out. Since different Android phones come with different types of ROMs, it difficult to cover all the aspects about the different types of ROMs.

Brick smartphone problem has become more prominent than phone freezing or hanging issue. Android users are often seen looking for solutions to fix their soft brick and hard brick phones. Android phones are prone to get bricked and thus, it is important for us to know about the three techniques given above. These methods have been tried, tested and recommended by ay affected bricked phone users. Therefore, these tips are reliable and worth a try. So if your phone acts stubborn and refuses to boot normally, examine the problem carefully and adopt one of the solutions given above which best suits your situation.

How to Fix Android.Process.Media Has Stopped on Motorola Moto G13

Like any other technological system, Android is not without its fair share of problems. One of the most common issues that Android users face is the android.process.media error. If you have encountered this problem lately, you don’t need to worry, this article will clearly explain what exactly causes this error and how to fix it safely.

Part 1. Why this error pops up?

There are several reasons why this error can occur repeatedly and it is worth noting the various reasons why this happens so that you can avoid the problem in the future. Some of the most common ones include:

• 1. Moving from one custom ROM to another can cause this error to occur
• 2. A failed firmware upgrade may also be to blame
• 3. A virus attack can also result in this error among many others
• 4. Restoring apps via a Titanium backup is also a major cause
• 5. Failure of certain apps such as the download manager and the media storage

Part 2. Back up your Android Data First

It is always a good idea to back up your data especially before embarking on any attempt to fix any problem with your device. This way you will always have your data with you just in case something goes wrong and you lose all your data. Wondershare Dr.Fone will help you easily back up your Motorola Moto G13. The application will allow you to back up your device with a few clicks and you can restore what you want from your backup .

Wondershare Dr.Fone

Flexibly Back up and Restore Android Data

• One-click to back up Android data to the computer.
• Preview and selectively restore the backup to any Android device.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restore.

4,503,800 people have downloaded it

Follow the steps below to learn how to back up your phone in steps.

Step 1. Download, install, and run the program

Click the “Start Download” button above to get the software installed on your computer. Then run it. The primary window of the software looks like below.

Step 2. Connect your device

Then connect your Motorola Moto G13 to the computer and make sure that it can be recognized by your computer. Then click on “My Backup” on Dr.Fone.

Step 3. Begin to backup

When your device is displayed on the window of the program, click “Back Up Now “ to begin. The rest will be done by the program.

safe & secure

Part 3. How to Fix “Android. Process. Media” Error

With a full backup of your Motorola Moto G13, you can now embark on a mission to fix the error. There are several methods to clear this error. We have outlined three of the most effective solutions here.

Method 1: Ensure app and system updates

Updates often include patches for known issues and vulnerabilities. Ensuring that both apps and the system are up to date can resolve many potential problems.

Step 1: Visit the Google Play Store to check for available app updates.

Step 2: In “Settings,” go to “System” > “Software Update” to check for system updates.

Method 2: Reset app preferences

App preference settings might sometimes lead to conflicts or anomalies. Resetting these settings can revert apps to their default state, resolving potential issues.

Step 1: Go to “Settings” on your device.

Step 2: Access “Apps.”

Step 3: Tap the menu icon in the upper-right corner and select “Reset App Preferences.”

Method 3: Clear the cache and data on your device

Step 1: Go to Settings> Applications> Manage Applications and find the Google Services framework.

Step 2: Next, find Google Play from the same Manage Applications page.

Step 3: Tap on it and then Tap on clear cache.

Step 4: Press the back button to go back to the Google Services framework and then choose Force stop > clear cache > OK

Step 5: Next you need to open Google Play and when presented with an error, click OK

Step 6: Turn off the Motorola Moto G13 device and then turn it back on. Go to the Google Services framework again and turn it on to see if the issue has been resolved.

Method 4: Check Google Sync & Media Storage settings

Step 1: Go to Settings > Accounts and Personal> Google Sync and uncheck all the checkboxes to stop the Google Synchronization.

Step 2: Disable and Clear all Media Storage data by going to Settings> Apps> All Apps. Find the Media Storage> Clear Data> Disable

Step 3: Use the same method as above to clear the Download Manager data

Step 4: Turn off your device and then turn it on

This Should clear the error message for good.

Method 5: Boot your device into safe mode

Safe mode can temporarily disable third-party apps, allowing only core system apps. This detects if a third-party app causes the “Android process media keeps stopping” error. If the problem disappears in safe mode, a third-party app might be the cause. Uninstalling it can restore normal function. If the problem persists in safe mode, a deeper system issue might exist, needing further investigation or support.

Method 6: Fix the error by using a dedicated repair tool

Dr.Fone - System Repair (Android)

Fix Android process media has stopped issue in one click

• Fix all Android system issues like black screen of death, won’t turn on, system UI not working, etc.
• Industry’s 1st tool for one-click Android repair. Without any data loss.
• Supports all the new Motorola Moto G13 devices like Galaxy S8, S9, S22, etc.
• Step-by-step instructions provided. No technical skills required.

4,989,253 people have downloaded it

Step 1. Connect your Motorola Moto G13

After launching Dr.Fone, click on “System Repair” from the main window.

Then connect your Motorola Moto G13 with the correct cable and choose “Android” > click “Start”.

In the Motorola Moto G13 device information interface, remember to select the correct information. Then confirm the warning and click “Next”.

To confirm the Android repair may erase all data on your device, you need to type in “000000” to proceed.

Step 2. Repair your Motorola Moto G13 in Download mode.

Read and follow the guide here to boot your Motorola Moto G13 in Download mode.

Then click “Next” to start downloading the firmware.

It may take a while, so you could have a cup of coffee to wait for the repair process completed.

safe & secure

Method 7: Factory Reset your device

If the above steps fail, you might need to perform a factory reset. A factory reset restores the Motorola Moto G13 device to its initial state, which can eliminate many problems, but it will also erase all data. Ensure you back up your important data before proceeding.

Method 8: Seek Manufacturer Support

If the problem persists after trying the above steps, it could be related to specific device or software issues. It’s advisable to contact your device manufacturer’s support team for more detailed guidance and assistance.

It is our hope that when faced with this fairly common error, you will not panic. This is a fairly mild issue that can easily be fixed as we have seen above.

safe & secure

How To Deal With the Motorola Moto G13 Screen Black But Still Works?

With the advance of technology over the years, many of us rely on smartphones to communicate, work, and play. As such, it can be pretty concerning when your device begins to act strange like your phone screen suddenly went blank.

Whether you’re using an iPhone or an Android device, you’ll eventually encounter a problematic symptom like this. Therefore, this article will explore what to do when your phone screen goes black. After exploring below, you’ll learn the common causes of why your phone screen went black and how to fix it. Read on below to learn more.

Part 1: Why Did My Motorola Moto G13 Screen Go Black but Still Works? Common Causes

Experiencing a cell phone blank screen is not exclusive to Android or iOS users. A phone screen not turning on happens all the time due to several factors that may or may not be out of your control. While they can be frustrating, here are some common causes you should know as to why your phone screen went black but still works.

A Drained Battery

The first thing that comes to mind when your phone screen suddenly goes black is you have a drained battery. Even though this is obvious, it’s still important to mention, as this is usually what most people encounter. To fix this problem, plug your smartphone into a charger and wait for your device to turn on again. If it works, then you just prevented a rather annoying experience.

App Troubles

If your phone is working, but the screen is black, there’s also a high probability that you are having an isolated issue with a particular application. An app could be loading something, which often happens for streaming apps such as YouTube, Netflix, Prime, and more, especially if you have slow internet connectivity.

Software Issues

A potential reason why your phone screen went black but still works could be because of your smartphone’s software. This problem suggests that your Motorola Moto G13 is crashing, potentially freezing your device if not addressed immediately. If this is the cause, then your device is likely experiencing a critical system error, and you should directly try to reboot your phone.

Hardware Problem

If you dropped your phone, there’s a high chance the LCD connectors went loose due to the physical impact. If this happened to you, the phone might be working, but the screen is black due to the LCD cable dislodging. Another issue could be your phone got exposed to extreme temperatures. This can also cause a black screen but your phone is still on.

Part 2: How To Fix Black Screen on Your Phone

Here are four valuable methods you should know on what to do when your phone screen goes black on your iPhone or Android smartphone to get them working again.

Method 1: Force Restart your Android/iOS Smartphone

If your phone screen is black but still works, force restarting it is the easiest way to fix it. The following are the detailed steps for both Android and iOS devices.

How to Force Restart your Android Device

Here is how you force restart an Android device when your phone screen doesn’t turn on.

Step 1: Press and hold the Power and Volume Down buttons simultaneously.

Step 2: Hold the same buttons until your device restarts, and display the phone’s logo.

How to Force Restart your iOS Device

If you own the latest iPhone models, here are the method of restarting it from iPhone 8 up to 14.

Step 1: Press and immediately release Volume Up. Next, press and immediately release Volume Down.

Step 2: Press and hold Sleep/Wake until you see the Apple logo.

Note

If you own an iPhone 7, press and hold the Side button and Volume Down simultaneously until you see the apple logo.

Method 2: Uninstall or Update Outdated Applications

In some cases, your phone screen is black but still works because of installing incompatible apps on your iOS/Android device. If the installed app is frequently crashing, it may be the source of a blank cell phone screen. Uninstall the problem app to see if the black screen disappears or not.

Method 3: Inspect the LCD Connectors

If your phone screen goes black but still works, you should inspect the logic board to the LCD screen to see if it has become disconnected. It is common for smartphones that often get dropped a few times. It’s best to plug the connectors back to regain your screen’s functionality.

However, this requires technical know-how. It’s better to seek help from a professional as you could risk causing more damage to your device if you don’t know what you’re doing.

Method 4: Perform a Factory Reset

If all the methods above did not solve your problem, the last resort you can take is to perform a Factory Reset. This method works on Android and iOS smartphones and erases all your data. It is the quickest way to try to fix why your phone screen went black. Here are the steps.

For Android Users

If you’re on Android, tap Settings > Backup and Reset. Tap on Factory data reset > Delete all to initiate the factory reset.

If you cannot do this, here’s how to perform a factory reset manually using Recovery Mode.

Note

The process of booting into Recovery Mode is not the same across all Android devices and depends on the manufacturer and model of your phone. Refer to your owners manual to see which method is the right one for your Motorola Moto G13.

Step 1A: Press and hold the Power button and Volume Down buttons simultaneously and continue holding until the screen starts.

Step 1B: For Android devices with a Home button, press and hold the Home button and the Power button and continue holding until the screen starts.

Step 1C: Press and hold the Power button as well as the Volume Up and Volume Down buttons simultaneously and continue holding until the screen starts.

Step 2: Use the Volume buttons to navigate the choices and select Wipe data/factory reset and confirm your choice with the Power button.

Step 3: Simply wait for the process to complete and wait for your Motorola Moto G13 to restart automatically.

F****or iOS Users

Step 1: For iOS users, meanwhile, tap Settings > General > Transfer or Reset iPhone.

Step 2: Next, choose Erase All Content and Settings. Check the list of items you want to remove.

Step 3: Tap Continue and enter your iPhone passcode. A message warns you that the process will delete all media and data and reset all settings.

Step 4: Tap Erase iPhone to confirm. You’ll be asked to type in your Apple ID and password if Find My is active. Enter your password and tap Erase.

Part 3: How To Fix Black Screen Phone With an Alternative

If your phone screen went black but still works and doing the methods above did not solve the issue, you can use Wondershare Dr.Fone for iOS and Android as a last resort. It’s one of the most popular smartphone repair tools today, enabling you to fix all kinds of annoying scenarios. These include black screen, boot loop, white screen of death, bricked iOS or Android device, and more.

Key Features

Dr.Fone – System Repair for iOS and Android has fantastic features you can immediately take advantage of. Here are its key features below.

• Fix all Android and iOS Problems in Minutes

Dr.Fone – System Repair can fix all kinds of issues on your Android/iOS, such as a black screen, white screen of death, screen freeze, boot loop, or recovery mode. All of this can be done within less than 10 minutes to save you precious time.

• Supports up to 1000+ Android Smartphones and the latest iOS

All iOS versions, including the latest iOS 16 and iOS 16 beta, are fully supported by Dr.Fone – System Repair. The app handles all your smartphone issues without data loss to secure your info. On the other hand, if you own an Android, the app supports up to 1000+ Android smartphones, making it highly versatile for Android owners.

Tech Specs

Dr.Fone – System Repair (Android)’s minimum system requirements for your computer are listed below.

Computer OS	Android
Windows 11, 10, 8.1, 8, 7	Android 2.1 and up to the latest

Meanwhile, here are the system requirements for Dr.Fone – System Repair (iOS).

Computer OS	iOS
Windows 11, 10, 8.1, 8, 7	Supports all iOS versions, including the latest iOS 16 and iOS 16 beta
macOS 12, 11, 10.15, 10.14, 10.13, 10.12, 10.11, 10.10, 10.9, 10.8

Pros and Cons

If you’re still undecided about Dr.Fone – System Repair, here are its pros and cons.

Pros

• Fone – System Repair for iOS and Android has a clutter-free and beginner-friendly user interface. It’s easy to understand and use, so you can start immediately.
• Both the iOS and Android versions finish the repair tasks within less than 10 minutes to save you time.

Cons

• Each version for each OS is sold separately.
• The free version works up to your device’s compatibility. Once you start the repair process, the app will ask you for a valid license key.

How to Fix Black Phone Screen With Dr.Fone – System Repair

Here’s how to fix your phone screen with Dr.Fone – System Repair on iOS/Android.

Step 1: Download and install Dr.Fone – System Repair for iOS or Android. Next, open the program and connect your smartphone.

Step 2A (For iOS): Choose the correct model of your iPhone for the program to be able to download the appropriate firmware package.

Step 2B (For Android): Click Start. On the next window, choose the Brand, Name, Model, Country, and Carrier of your smartphone, then click Next.

Step 3: Follow the on-screen instructions provided on the main program window and wait for the repair process to complete.

safe & secure

4,262,204 people have downloaded it

Conclusion

Our increasing reliance on smartphones has led to amazing advancements in new technologies. However, lingering issues such as your phone screen not turning on or your phone screen being black but still working are ongoing problems to many. That’s why learning how to prevent these events is essential to take care of your smartphone.

Doing all the recommended methods above usually solves the case. If the different fixes don’t work for you, Dr.Fone – System Repair for iOS and Android can help resolve all your problems within less than 10 minutes. You can download it for free on Windows and Mac to test it yourself.

Also read: