How to Fix the Soft Bricked Motorola Moto G24? | Dr.fone

How to Fix the Soft Bricked Motorola Moto G24? | Dr.fone

Ariadne Lv13

How to Fix the Soft Bricked Motorola Moto G24?

Bricked phone is a serious problem, as your brick smartphone could be suffering from a soft brick or hard brick problem, and must be dealt with carefully. It is very common to see a brick smartphone these days. If you are wondering what exactly is a bricked phone, here is your answer.

A bricked phone, hard brick or soft brick, is a smartphone which refuses to start or boot all the way up the home/main screen of the Motorola Moto G24 device. This issue is observed within most Android phones because users have a tendency to tamper with the Motorola Moto G24 device settings, flashing new and customized ROMs and tweaking with the essential files. Playing around with the phone’s internal set-up leads to such errors, worst of them being a brick smartphone. Usually, a bricked phone does not switch on and stays frozen at the Motorola Moto G24 device logo, a blank screen or even worse, doesn’t respond to any command, even the power on command.

If you are confused about the soft brick and hard brick problems and looking for solutions to fix your priced phone, then here is all you need to know.

Read on to find out more.

Part 1: What is the difference between soft brick and hard brick?

To begin with, let us understand the basic difference between a soft brick and hard brick issue. Both versions of a bricked phone prevent it from booting but differ in their causes and gravity of the problem.

A soft-brick problem is caused merely by a software error/crash and makes your device switch on automatically every time you manually turn it off. This phenomenon is referred to as Boot Loop. Soft bricked Android phones are not as difficult to fix as the hard bricked Android phones. It is convenient to say that a soft bricked phone only boots up half-way and not fully, whereas a hard bricked device does not switch on at all. A hard brick error is thus caused when the kernel, which is nothing but an interface for the software to communicate with the hardware, is tampered with. A hard bricked phone is not recognized by your PC when plugged in and is a serious problem. It requires troubleshooting techniques and cannot be easily fixed as the soft brick problem.

hard bricked v/s soft bricked

Hard bricked phones are a rare sight, but the soft brick is very common. Given below are ways to fix a soft brick Android phone. The techniques listed here are the best and the most efficient ways to get your phone back to its normal working conditions without losing your important data or damaging your device or its software.

Part 2: Stuck at the Boot Loop

This is the first sign of a soft bricked Android phone. Boot Loop is nothing but when your phone does not remain switched off and turns itself on automatically, and freezes at the logo screen or blank screen, every time you manually try to power it off.

Stuck at boot loop problem can be fixed by clearing your Cache partitions. These partitions are nothing but storage locations for your modem, kernels, system files, drivers and built-in Apps data.

It is advisable to clear Cache partitions regularly to keep your phone free from such glitches.

Since the phone refuses to boot, Cache can be cleared from entering into the Recovery Mode. Different Android devices have different ways to put it in recovery mode. Normally pressing the power key and volume down key helps, but you may refer to your phone’s guide for better understanding and then follow the steps given below to clear the cache partition:

Once you are the recovery mode screen, you will see a number of options as shown in the screenshot.

recovery mode

Use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

”Wipe cache partition”>

After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you erase all the clogged up and unwanted files. You may loose some App related data, but that is a small price to pay to fix your bricked phone.

If this method does not boot up your brick smartphone and the problem still persists, there are two more things you can try. Read ahead to find out about them.

Part 3: Booting straight into recovery mode

If your bricked phone does not boot up to your Home Screen or Lock screen and instead boots directly into Recovery Mode, there is not much left to do. Booting straight into recovery mode is undoubtedly a soft brick error but it also indicates a possible problem with your current ROM. The only option you have to flash a new ROM to reboot your bricked phone back to its normal functioning.

To flash a new ROM:

Firstly, you must root your phone and unlock the Bootloader. Every phone’s mechanism to unlock the bootloader is different, thus, we suggest to refer to your user manual.

Once the Bootloader is unlocked, take a backup of all your data by selecting “Backup” or “Android” back in recovery mode. The process should not take long and all you need to do is tap “OK” to config backup.

backup and restore

In this step, download a ROM of your choice and store it in your SD Card. Insert the SD Card in your phone to begin the flashing process.

Once at the recovery mode, select “Install Zip from SD Card” from the options.

install zip from sdcard

https://techidaily.com

Scroll down using the volume key and use the power key to select the downloaded ROM.

Scroll down

select the downloaded ROM

This might take a few minutes of your time, but once the process is complete, reboot your phone.

Hopefully, your bricked phone will not boot normally and work smoothly.

Part 4: Booting straight into Bootloader

If your bricked phone boots straight into Bootloader, then this a serious issue and must not be taken lightly. Flashing a new ROM or clearing cache partitions are of little help in such a brick smartphone situation. Booting straight into Bootloader is a peculiar soft bricked Android phone feature and can be tackled only by downloading and flashing your original ROM from the manufacturer. In order to do so, a detailed study about your manufacturer’s ROM, ways to download and flash must be carried out. Since different Android phones come with different types of ROMs, it difficult to cover all the aspects about the different types of ROMs.

Brick smartphone problem has become more prominent than phone freezing or hanging issue. Android users are often seen looking for solutions to fix their soft brick and hard brick phones. Android phones are prone to get bricked and thus, it is important for us to know about the three techniques given above. These methods have been tried, tested and recommended by ay affected bricked phone users. Therefore, these tips are reliable and worth a try. So if your phone acts stubborn and refuses to boot normally, examine the problem carefully and adopt one of the solutions given above which best suits your situation.

How to Fix Android.Process.Media Has Stopped on Motorola Moto G24

Like any other technological system, Android is not without its fair share of problems. One of the most common issues that Android users face is the android.process.media error. If you have encountered this problem lately, you don’t need to worry, this article will clearly explain what exactly causes this error and how to fix it safely.

android process media has stopped

Part 1. Why this error pops up?

There are several reasons why this error can occur repeatedly and it is worth noting the various reasons why this happens so that you can avoid the problem in the future. Some of the most common ones include:

  • 1. Moving from one custom ROM to another can cause this error to occur
  • 2. A failed firmware upgrade may also be to blame
  • 3. A virus attack can also result in this error among many others
  • 4. Restoring apps via a Titanium backup is also a major cause
  • 5. Failure of certain apps such as the download manager and the media storage
https://techidaily.com

Part 2. Back up your Android Data First

It is always a good idea to back up your data especially before embarking on any attempt to fix any problem with your device. This way you will always have your data with you just in case something goes wrong and you lose all your data. Wondershare Dr.Fone will help you easily back up your Motorola Moto G24. The application will allow you to back up your device with a few clicks and you can restore what you want from your backup .

Wondershare Dr.Fone

Flexibly Back up and Restore Android Data

  • One-click to back up Android data to the computer.
  • Preview and selectively restore the backup to any Android device.
  • Supports 8000+ Android devices.
  • There is no data lost during backup, export, or restore.

4,503,800 people have downloaded it

Follow the steps below to learn how to back up your phone in steps.

Step 1. Download, install, and run the program

Click the “Start Download” button above to get the software installed on your computer. Then run it. The primary window of the software looks like below.

Android. Process. Media - backup android

Step 2. Connect your device

Then connect your Motorola Moto G24 to the computer and make sure that it can be recognized by your computer. Then click on “My Backup” on Dr.Fone.

Android. Process. Media - recognize phone

https://techidaily.com

Step 3. Begin to backup

When your device is displayed on the window of the program, click “Back Up Now “ to begin. The rest will be done by the program.

Android. Process. Media - select data types

safe Downloadsafe & secure

https://techidaily.com

Part 3. How to Fix “Android. Process. Media” Error

With a full backup of your Motorola Moto G24, you can now embark on a mission to fix the error. There are several methods to clear this error. We have outlined three of the most effective solutions here.

Method 1: Ensure app and system updates

Updates often include patches for known issues and vulnerabilities. Ensuring that both apps and the system are up to date can resolve many potential problems.

Step 1: Visit the Google Play Store to check for available app updates.

Step 2: In “Settings,” go to “System” > “Software Update” to check for system updates.

Method 2: Reset app preferences

App preference settings might sometimes lead to conflicts or anomalies. Resetting these settings can revert apps to their default state, resolving potential issues.

Step 1: Go to “Settings” on your device.

Step 2: Access “Apps.”

Step 3: Tap the menu icon in the upper-right corner and select “Reset App Preferences.”

Method 3: Clear the cache and data on your device

Step 1: Go to Settings> Applications> Manage Applications and find the Google Services framework.

Step 2: Next, find Google Play from the same Manage Applications page.

Step 3: Tap on it and then Tap on clear cache.

clear crash

Step 4: Press the back button to go back to the Google Services framework and then choose Force stop > clear cache > OK

Step 5: Next you need to open Google Play and when presented with an error, click OK

Step 6: Turn off the Motorola Moto G24 device and then turn it back on. Go to the Google Services framework again and turn it on to see if the issue has been resolved.

Method 4: Check Google Sync & Media Storage settings

Step 1: Go to Settings > Accounts and Personal> Google Sync and uncheck all the checkboxes to stop the Google Synchronization.

Step 2: Disable and Clear all Media Storage data by going to Settings> Apps> All Apps. Find the Media Storage> Clear Data> Disable

Step 3: Use the same method as above to clear the Download Manager data

Step 4: Turn off your device and then turn it on

This Should clear the error message for good.

Method 5: Boot your device into safe mode

Safe mode can temporarily disable third-party apps, allowing only core system apps. This detects if a third-party app causes the “Android process media keeps stopping” error. If the problem disappears in safe mode, a third-party app might be the cause. Uninstalling it can restore normal function. If the problem persists in safe mode, a deeper system issue might exist, needing further investigation or support.

Method 6: Fix the error by using a dedicated repair tool

https://techidaily.com

Dr.Fone - System Repair (Android)

Fix Android process media has stopped issue in one click

  • Fix all Android system issues like black screen of death, won’t turn on, system UI not working, etc.
  • Industry’s 1st tool for one-click Android repair. Without any data loss.
  • Supports all the new Motorola Moto G24 devices like Galaxy S8, S9, S22, etc.
  • Step-by-step instructions provided. No technical skills required.

4,989,253 people have downloaded it

Step 1. Connect your Motorola Moto G24

After launching Dr.Fone, click on “System Repair” from the main window.

fix android.process.media stopping by drfone

Then connect your Motorola Moto G24 with the correct cable and choose “Android” > click “Start”.

select android repair to fix android.process.media stopping

In the Motorola Moto G24 device information interface, remember to select the correct information. Then confirm the warning and click “Next”.

select device details

To confirm the Android repair may erase all data on your device, you need to type in “000000” to proceed.

fix android.process.media stopping by entering code

Step 2. Repair your Motorola Moto G24 in Download mode.

Read and follow the guide here to boot your Motorola Moto G24 in Download mode.

fix android.process.media stopping in download mode

https://techidaily.com

Then click “Next” to start downloading the firmware.

start downloading firmware

It may take a while, so you could have a cup of coffee to wait for the repair process completed.

android.process.media stopping fixed

safe Downloadsafe & secure

Method 7: Factory Reset your device

If the above steps fail, you might need to perform a factory reset. A factory reset restores the Motorola Moto G24 device to its initial state, which can eliminate many problems, but it will also erase all data. Ensure you back up your important data before proceeding.

Method 8: Seek Manufacturer Support

If the problem persists after trying the above steps, it could be related to specific device or software issues. It’s advisable to contact your device manufacturer’s support team for more detailed guidance and assistance.

It is our hope that when faced with this fairly common error, you will not panic. This is a fairly mild issue that can easily be fixed as we have seen above.

safe Downloadsafe & secure

https://techidaily.com

Play Store Not Working On Motorola Moto G24? 8 Solutions Inside

A functional Google Play Store is crucial for Android users to access, update, and install apps. Unfortunately, common issues like your Google Play Store not working can disrupt this experience. If you find your Play Store misbehaving more often than not, don’t fret.

In this guide, discover reliable solutions when your Google Play Store is not responding. The article will teach you how to tackle these problems and ensure a seamless app experience. Don’t let technical glitches hinder your digital journey—follow these troubleshooting steps for a swift resolution. Explore the page below to learn more.

woman annoyed on phone not working

https://techidaily.com

Part I. 7 Common Google Play Store Issues Users Encounter

The Google Play Store serves as the epicenter for Android users. It facilitates seamless access to a vast array of apps. However, encountering issues with the platform can impact the functionality of your device. Below are 7 common issues on why your Google Play Store is not responding.

alert status problem on mobile device

Inability To Open the Play Store

The inability to open the Play Store leaves you without access to new apps or updates. The issue is often accompanied by error messages, which can leave you scratching your head.

Crashing Issues

Frequent crashes undermine the stability of the Play Store. Users attempting to browse or download apps may find themselves abruptly kicked out of the application. It can disrupt your intended tasks and cause annoyance in the long run.

Not Responding Errors

The dreaded “Not Responding” message can bring usability to a standstill. Users navigating the Play Store may experience delays or complete unresponsiveness. It can lead to a frustrating and unproductive experience.

Download and Installation Failures

When downloads and installations fail, you will be unable to enjoy new apps or updates. This issue can be annoying when trying to access crucial software improvements or security updates.

Authentication and Account Issues

Problems with authentication and account access can lock users out of their Google accounts on the Play Store. It prevents users from purchasing or downloading apps. The issue not only hampers functionality but also raises security concerns.

Update Problems

Difficulties in updating apps can leave users with outdated software. It can potentially compromise security and miss out on new features. The issue diminishes the user experience by depriving you of the latest enhancements.

Connection and Network Errors

Persistent connection and network errors impede the Play Store’s ability to fetch data. It hinders users from browsing and downloading apps. The issue is frustrating in areas with unstable internet connectivity.

Part II. Why Does the Google Play Store Keep Stopping?

If you’re wondering why does Google Play Store keeps stopping on your phone, there can be several factors. Here are some of them below.

man having issues on mobile phone

  • **Network issues.**Unstable or poor internet connections can disrupt the communication between the Motorola Moto G24 device and the Play Store. It can lead to frequent crashes.
  • **Outdated Play Store version.**Running an outdated version of the Play Store may result in compatibility issues. The lack of essential updates can cause the application to stop unexpectedly.
  • Cache and data accumulation. Over time, cached data and accumulated data in the Play Store can become corrupted. It can hinder the smooth operation of your phone and contribute to sudden stops.
  • Google account problems. Authentication issues, incorrect credentials, or other problems with the linked Google account can disrupt the Play Store’s functionality. This can also lead to repeated crashes.
  • **System glitches and bugs.**Inherent glitches and bugs within the Android operating system may affect the Play Store’s performance. They can cause your device to stop unexpectedly.

Part III.7 Quick Solutions To Resolve Play Store Not Working Issues

Encountering issues with the Google Play Store can be frustrating. It disrupts your ability to download, update, or access essential apps. Here are seven quick solutions when your Google Play Store unfortunately has stopped.

fixing mobile phone issues vector image

Clear Cache and Data

Revitalize your Google Play Store by addressing performance issues. Clearing cache and data can be a crucial step when troubleshooting malfunctions or glitches in the app. Here’s how.

  • Step 1: Head to your device’s Settings and navigate to Apps or Application Manager.
  • Step 2: Locate and select Google Play Store. Within Storage, choose Clear Cache and Clear Data. Confirm your action and restart the Play Store.

clearing cache and date on android

Update Play Store

Enhance your Play Store’s functionality by ensuring it’s up-to-date. This method suits those who haven’t updated their Google Play Store for a long time. Follow the steps below.

  • Step 1: Open the Play Store app and tap the three horizontal lines in the top-left corner to access the menu.
  • Step 2: Select Settings and scroll down to find the Play Store version. Install any available updates.

updating play store on android

Check Internet Connection

Ensure a stable internet connection on your device. Switch between Wi-Fi and mobile data to identify connectivity issues. Restart your router or modem if problems persist.

Reset App Preferences

Restore your device’s app settings to default for improved functionality. Below are the steps.

  • Step 1: Go to your device’s Settings and select Apps or Application Manager.
  • Step 2: Tap the three dots in the top-right corner and choose Reset app preferences.

resetting app preferences on android

Re-add Google Account

Resolve Play Store issues by re-adding your Google account. Follow these steps in Settings to remove and re-add your Google account, ensuring a seamless and error-free experience.

  • Step 1: Navigate to Settings and choose Accounts or Users & Accounts.
  • Step 2: Select Google and remove the account. Re-add the Google account and verify if the Play Store functions properly.

re-adding google account on android

Uninstall Play Store Updates

This method troubleshoots Play Store problems by uninstalling updates. Here’s how.

  • Step 1: Access Settings and go to Apps or Application Manager.
  • Step 2: Find Google Play Store and tap on Uninstall Updates. Confirm the action and restart the Play Store.

uninstall play store updates on android

Perform a System Update

Ensure your device’s overall stability by performing a system update to ensure the stable operation of the Play Store. Follow the steps below.

  • Step 1: Access Settings, scroll down, and select System or Software Update.
  • Step 2: Next, choose System update or Check for Updates and install any available system updates**.**

perform system update on android

If you’re still asking yourself why my Google Play Store is not opening after conventional methods prove ineffective, it may lead you to explore third-party tools. As a final recourse, considering reputable tools like Wondershare Dr.Fone - System Repair introduces a fresh approach to troubleshooting your device.

Part IV. How To Repair Play Store Not Working With an Alternative

Repairing your Google Play Store can be swift and effective with Dr.Fone - System Repair. This tool offers advanced features to diagnose and fix various system issues without the advanced skills required. It provides a quick and efficient resolution for a malfunctioning Google Play Store. Follow these three simple steps to get started:

  • Step 1: Begin by downloading and installing Dr.Fone - System Repair (Android) on your computer.

safe Downloadsafe & secure

4,207,329 people have downloaded it

  • Step 2: Launch the program and connect your Motorola Moto G24 to the computer using a USB cable. Choose the Motorola Moto G24 device type and click Start to initiate the repair process.

dr.fone android problems window

  • Step 3: Dr.Foneshould automatically detect the brand of your device. Next, choose the Name, Model, Country, and Carrier. Tick the checkmark and click Next to continue. Follow the on-screen instructions and wait for the repair process to complete.

dr.fone device information window

  • Step 4: Simply click Done on the prompt window displaying a confirmation message to exit the tool if your Motorola Moto G24 starts successfully. In the event that the Motorola Moto G24 device fails to start, select Try Again to initiate the process once more.

dr.fone repair completed window

Bonus: What Else Can Dr.Fone - System Repair Do?

Beyond its utility in fixing Google Play Store malfunctions, Dr.Fone is known for its user-friendly interface and high success rate. Its ability to address a wide range of Android issues offers a comprehensive solution to various system-related problems. Below are the platform’s key highlights.

dr.fone main window

Key Features

  • Fixes diverse Android issues. Dr.Fone - System Repair excels in resolving a multitude of Android problems. This includes a black screen, a boot loop, and bricked Android devices. Its comprehensive approach ensures you can rely on a single tool to tackle a wide range of system-related issues.
  • Support for over 1000 Android models. Dr.Fone supports over 1000 Android models. The broad coverage ensures diverse devices can use the software to troubleshoot and repair their Android systems.
  • User-Friendly interface. Dr.Fone is designed with simplicity in mind. It offers an easy-to-use interface that caters to both novice and experienced users.
  • High success rate. The software boasts a high success rate in resolving Android issues. Its effectiveness in tackling various problems has garnered trust among users. It’s one of the go-to solutions for those seeking reliable and efficient system repairs.

safe Downloadsafe & secure

4,131,376 people have downloaded it

Conclusion

Addressing issues when your Google Play Store does not work is crucial for an uninterrupted Android experience. Follow the outlined steps to regain control and enjoy a seamless app experience. Don’t let frustrations linger; take immediate action for a hassle-free Google Play Store.

Lastly, having Dr.Fone - System Repair at your side offers a reliable solution for a wide range of Android concerns. Don’t worry if your Google Play store is not responding, and Dr.Fone can fix it in minutes.


Also read:

  • Title: How to Fix the Soft Bricked Motorola Moto G24? | Dr.fone
  • Author: Ariadne
  • Created at : 2024-10-30 23:05:44
  • Updated at : 2024-11-03 08:20:18
  • Link: https://howto.techidaily.com/how-to-fix-the-soft-bricked-motorola-moto-g24-drfone-by-drfone-fix-android-problems-fix-android-problems/
  • License: This work is licensed under CC BY-NC-SA 4.0.
On this page
How to Fix the Soft Bricked Motorola Moto G24? | Dr.fone