How to Fix the Soft Bricked Poco M6 Pro 4G?

Bricked phone is a serious problem, as your brick smartphone could be suffering from a soft brick or hard brick problem, and must be dealt with carefully. It is very common to see a brick smartphone these days. If you are wondering what exactly is a bricked phone, here is your answer.

A bricked phone, hard brick or soft brick, is a smartphone which refuses to start or boot all the way up the home/main screen of the Poco M6 Pro 4G device. This issue is observed within most Android phones because users have a tendency to tamper with the Poco M6 Pro 4G device settings, flashing new and customized ROMs and tweaking with the essential files. Playing around with the phone’s internal set-up leads to such errors, worst of them being a brick smartphone. Usually, a bricked phone does not switch on and stays frozen at the Poco M6 Pro 4G device logo, a blank screen or even worse, doesn’t respond to any command, even the power on command.

If you are confused about the soft brick and hard brick problems and looking for solutions to fix your priced phone, then here is all you need to know.

Read on to find out more.

Part 1: What is the difference between soft brick and hard brick?

To begin with, let us understand the basic difference between a soft brick and hard brick issue. Both versions of a bricked phone prevent it from booting but differ in their causes and gravity of the problem.

A soft-brick problem is caused merely by a software error/crash and makes your device switch on automatically every time you manually turn it off. This phenomenon is referred to as Boot Loop. Soft bricked Android phones are not as difficult to fix as the hard bricked Android phones. It is convenient to say that a soft bricked phone only boots up half-way and not fully, whereas a hard bricked device does not switch on at all. A hard brick error is thus caused when the kernel, which is nothing but an interface for the software to communicate with the hardware, is tampered with. A hard bricked phone is not recognized by your PC when plugged in and is a serious problem. It requires troubleshooting techniques and cannot be easily fixed as the soft brick problem.

Hard bricked phones are a rare sight, but the soft brick is very common. Given below are ways to fix a soft brick Android phone. The techniques listed here are the best and the most efficient ways to get your phone back to its normal working conditions without losing your important data or damaging your device or its software.

Part 2: Stuck at the Boot Loop

This is the first sign of a soft bricked Android phone. Boot Loop is nothing but when your phone does not remain switched off and turns itself on automatically, and freezes at the logo screen or blank screen, every time you manually try to power it off.

Stuck at boot loop problem can be fixed by clearing your Cache partitions. These partitions are nothing but storage locations for your modem, kernels, system files, drivers and built-in Apps data.

It is advisable to clear Cache partitions regularly to keep your phone free from such glitches.

Since the phone refuses to boot, Cache can be cleared from entering into the Recovery Mode. Different Android devices have different ways to put it in recovery mode. Normally pressing the power key and volume down key helps, but you may refer to your phone’s guide for better understanding and then follow the steps given below to clear the cache partition:

Once you are the recovery mode screen, you will see a number of options as shown in the screenshot.

Use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

>

After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you erase all the clogged up and unwanted files. You may loose some App related data, but that is a small price to pay to fix your bricked phone.

If this method does not boot up your brick smartphone and the problem still persists, there are two more things you can try. Read ahead to find out about them.

Part 3: Booting straight into recovery mode

If your bricked phone does not boot up to your Home Screen or Lock screen and instead boots directly into Recovery Mode, there is not much left to do. Booting straight into recovery mode is undoubtedly a soft brick error but it also indicates a possible problem with your current ROM. The only option you have to flash a new ROM to reboot your bricked phone back to its normal functioning.

To flash a new ROM:

Firstly, you must root your phone and unlock the Bootloader. Every phone’s mechanism to unlock the bootloader is different, thus, we suggest to refer to your user manual.

Once the Bootloader is unlocked, take a backup of all your data by selecting “Backup” or “Android” back in recovery mode. The process should not take long and all you need to do is tap “OK” to config backup.

In this step, download a ROM of your choice and store it in your SD Card. Insert the SD Card in your phone to begin the flashing process.

Once at the recovery mode, select “Install Zip from SD Card” from the options.

Scroll down using the volume key and use the power key to select the downloaded ROM.

This might take a few minutes of your time, but once the process is complete, reboot your phone.

Hopefully, your bricked phone will not boot normally and work smoothly.

Part 4: Booting straight into Bootloader

If your bricked phone boots straight into Bootloader, then this a serious issue and must not be taken lightly. Flashing a new ROM or clearing cache partitions are of little help in such a brick smartphone situation. Booting straight into Bootloader is a peculiar soft bricked Android phone feature and can be tackled only by downloading and flashing your original ROM from the manufacturer. In order to do so, a detailed study about your manufacturer’s ROM, ways to download and flash must be carried out. Since different Android phones come with different types of ROMs, it difficult to cover all the aspects about the different types of ROMs.

Brick smartphone problem has become more prominent than phone freezing or hanging issue. Android users are often seen looking for solutions to fix their soft brick and hard brick phones. Android phones are prone to get bricked and thus, it is important for us to know about the three techniques given above. These methods have been tried, tested and recommended by ay affected bricked phone users. Therefore, these tips are reliable and worth a try. So if your phone acts stubborn and refuses to boot normally, examine the problem carefully and adopt one of the solutions given above which best suits your situation.

How to Fix Error 495 While Download/Updating Android Apps On Poco M6 Pro 4G

Error 495 is a common error that occurs while downloading or updating apps from Google Play Store. This error is usually caused by a problem with the Google Play Store, and it can be fixed by clearing the cache and data of the Google Play Store app. If you are experiencing this error, follow the steps below to fix it.

In this article, you will learn why the Android error 495 pops up, possible solutions to bypass, as well as a dedicated repair tool to radically fix error 495.

We always like to explore every new feature or the features that already exist on our devices. We have a tendency to be the master of our device and want to know every bit of the handset. Unexpected errors ruin that experience and it is just frustrating to experience these errors. And the worst part is that we have no idea where we are wrong or what we did that led to the error. Same is the case with the error 495 which occurs due to downloading or updating of Android Apps. You may have spent countless hours on the internet to find the right solution for error code 495 but even after following many of the most guaranteed steps sometimes the error still doesn’t go away.

However, this article will provide you various methods to get rid of the Error 495 play store problem that you face and you will not have to depend on any other sources for your solution.

Reasons for Google play error 495

Android Apps are most commonly downloaded from the Google Play Store with the help of Wi-Fi or Cellular Data. One may come across many types of errors. Mostly the errors come in during the download or update or installing time. Error 495 occurs when the user isn’t being able to download or install an app over Wi-Fi, but the user is able to do the same thing over cellular data.

Technically speaking, the issue is caused when the connection to the Google Play servers, where the app is hosted, times out. Which is unable to resolve by itself.

Also, there could be another reason that it cannot sync with the servers.

Now that we know the possible reasons for the error 495, let us also know how to get rid of it in the sections below.

Solution 1: One Click to Fix error 495 by Android Repair

Tried several methods to make the error 495 disappear, but nothing works? Well, many people have experienced the same frustration. The root cause is that something is wrong with the Android system. You need to have your Android system repaired to fix error 495 in this situation.

Note: Having your Android system repaired may lose existing data on your Android. Backup the data on your Android before the Android repair.

Dr.Fone - System Repair (Android)

Best tool for fundamental Android repair in one click

• Fixes all Android system issues like error 495, system UI not working, etc.
• One click for Android repair. No special technics needed.
• Supports all the new Poco M6 Pro 4G devices like Galaxy Note 8, S8, S9, etc.
• Step-by-step on-screen instructions provided to fix error 495 without any hassle.

3,390,486 people have downloaded it

With Dr.Fone - System Repair (Android) , you can easily fix error 495 in few steps. Here is how:

1. Download, install, and launch Dr.Fone - System Repair (Android). Connect your Android to your computer with a USB cable.

3. Select the option “Repair” > “Android Repair”, and click “Start”.

5. Select the Poco M6 Pro 4G device information like brand, name, model, etc., and confirm your selection by typing in “000000”.

7. Press the stated keys to boot your Android in download mode to download the firmware as instructed.

9. After the firmware is downloaded, the program will automatically start to repair your Android.

Solution 2: Clear the Google Service Framework cache to Fix error 495

Step 1:

Go to the “settings” of your device. Once the series of sections comes up, tap on the “APPS” section.

Step 2:

Click on ‘All Apps’ or ‘Swipe to All’ and the open the section named “Google Services Framework App”

.

STEP 3:

Open “App Details” and the screen shown in the image should come up on your device. As shown in the image, follow the three steps. First, tap on “Force Stop” and then second, tap on the “Clear Data” option and finally go ahead and tap on the “Clear Cache” option.

Following the above steps should solve your problem of Google Play Error 495. And you can enjoy back to using the apps which you couldn’t download or update due to the Error 495.

Solution 3: Reset App Preference in Google play Store to Fix error 495

STEP 1:

Go to the settings section in your device. It will be differently placed for different devices and different users.

STEP 2:

Once the Settings section is open. A lot of further sections will pop up. No find the section named “Application Manager” or “Apps”. After locating it, tap on that section.

STEP 3:

Now go ahead and tap or slide to a section named “ALL”.

STEP 4:

After reaching the “ALL” section tap the touch button to open menu/properties and choose an option named “Reset Apps” or “Reset App Preferences”.

There’s no need to be alarmed because on clicking the reset option, the apps won’t be deleted but it is only going to re-set them. And hence solving the Error 495 created in the Google Play.

Solution 4: Fix Error Code 495 by installing a VPN app

The Error code 495 can be easily removed in another interesting way too. On downloading a Virtual Private Network (VPN) and then operating the play store automatically solves the error 495.

STEP 1:

Install Hideman VPN (using any other VPN will also make it work) from Google Play store. (If the error persists for this app too then download it from a different app store or by using a third-party store).

STEP 2:

Now open the app and select the United States as the country of connection and press the option named Connect.

STEP 3:

Open Google Play Store and Download any app without the Error Code 495 coming in and bothering.

This fix will work for most of the Google Play Errors and not just only The Error Code 495.

Solution 5: Remove your Google Account & Reconfigure it to fix error 495

Removing the Google account and re-configuring it is a very common method adopted to get rid of the Error 495. Adopt the following steps to complete this method.

STEP 1:

Go to the “Settings” section of your device. Like it was mentioned before, different devices and different users will have the placement of the settings section in a different place.

STEP 2:

Go to the accounts section in the settings tab.

STEP 3:

In the accounts section tap on the Google Account part

STEP 4:

Inside The Google section, there’ll be an option called “Remove Account”. Tap on that section, to remove your google account.

STEP 5:

Now go ahead and re-enter/ re-register your Google account and check if the Error 495 still persists.

Now you have completed all the steps and your problem should be solved.

Solution 6: Fix error code 495 by Removing your Google Play Store Data & Cache

One of the best and most accurate methods in the series of various steps in eradicating the Error Code 495 in Google Play Store is by removing the Google play Store Data and Cache. In order to do so follow the steps mentioned below. After following the steps it is guaranteed that the Error code 495 will be done with and you won’t experience any such problems in the future.

STEP 1:

Go to the “Settings” section into your mobile device. The settings can be accessed by scrolling down and pulling down the drop-down menu and most likely the settings app will be on the top-right corner. Otherwise, it will be found after opening the app drawer.

STEP 2:

Once after opening the settings section, select the “Installed apps” or the “Apps” section.

STEP 3:

Find the “Google Play Store” section and select that too.

STEP 4:

Tap on the “Clear data” & “Clear Cache”.

Doing the above steps will clear your caches of the Google Play Store. Now you have a new google Play store.

Hence in this article, we got to know about the error 495 and the possible solutions to it as well. Also, this article explains how Error code 495 can be removed by 5 different ways. These are the best ways by which you can remove or get rid of the Error Code 495. In case one of the method fails, use the other one to rectify this recurring error 495 on your Poco M6 Pro 4G.

Spotify Keeps Crashing: A Complete List of Fixes You Can Use on Poco M6 Pro 4G

Does your Spotify keep crashing? You’re not alone. This problem is widespread and can happen to anyone. Fortunately, there are ways to rectify it quickly and easily. We’ve prepared a guide to fixing your Spotify crashing problem.

In our guide, you’ll find out why your Spotify keeps crashing. Moreover, you’ll get a list of fixes for your Spotify closing problem and detailed instructions. Once you’ve read our guide, you’ll successfully solve the problem of Spotify crashing on Android.

Part 1. Why Spotify Keeps Crashing

Some people have encountered a problem with their Spotify accounts. Spotify can sometimes keep crashing and closing due to several reasons. For example, it can happen due to your phone not being compatible with the app. This can happen if your operating system isn’t updated to the newest version.

Another reason the Spotify app keeps crashing could be an antivirus or a VPN blocking Spotify from working. Moreover, your device might be out of storage space, causing your phone to slow down and crash apps.

Several other reasons for this problem include network issues, a weak Wi-Fi signal, or the battery saving mode. Furthermore, your apps and files might be corrupted, or an app on your phone might block Spotify from working correctly.

Part 2. Spotify Keeps Crashing: Best Fixes

As you can see, there are numerous reasons for your Spotify crashing. Fortunately, all of them are easy fixes, and there’s no need to worry. We’ve prepared a list of 11 ways to fix your Spotify. With these fixes and detailed instructions, you’ll be able to eliminate your Spotify problem with ease.

1. Fix the Spotify Closing Issue by Repairing Your System

The reason for your Spotify crashing may be more significant than just a bug. Your device system might be behind it. If that’s the case, you might need to repair your system before trying to fix Spotify.

If you want to repair your mobile device’s system quickly and efficiently, try Wondershare Dr.Fone.

Wondershare Dr.Fone is an app that gives you complete control over your phone. You can manage it, back it up, recover files, and repair your system. The system repair option will fix your Android in just a few clicks and allow you to use Spotify freely. The steps go as follows:

• Step 1: Install and open Wondershare Dr.Fone on your computer and connect your Android.
• Step 2: Go to the Toolbox section and select System Repair.

• Step 3: Choose the Android

• Step 4: See which Android errors Wondershare Dr.Fone can fix and click Start.

• Step 5: Select the **Brand,**Name, Model, Country, and Carrier In the Carrier section, choose OPEN if your device is unlocked.

• Step 6: Tick the “I agree with the warning, and I am ready to proceed”checkbox and click Next.
• Step 7: Put your Android in Download Mode. You can find the steps below these instructions.
• Step 8: The program will automatically download once you put the phone in Download Mode.

• Step 9: Once the firmware downloads, click Fix Nowto install it on your Android.

• Step 10: Type “000000” in the dialog box and click Confirm.

• Step 11: That will start the system reparation, which you can follow on the screen.

• Step 12: Once it finishes, click Doneto complete the system repair.

There are two ways to enter Download Mode: one for Android devices with the Home button and another for those without it.

The steps for entering Download Mode on an Android phone with the Home button are as follows:

• Step 1: Turn off your phone.
• Step 2: Press and hold the Volume Down,Home, and Power buttons simultaneously.
• Step 3: Press the Volume Upbutton to enter Download Mode.

The steps for entering Download Mode on Android devices without the Home button are as follows:

• Step 1: Turn off your phone.
• Step 2: Press and hold the Volume Down, Bixby, andPower buttons simultaneously.
• Step 3: Press the Volume Upbutton to enter Download Mode.

2. Force-Close the App

You can force-close Spotify and open it again to make it work properly. That is an easy fix if your Spotify has developed a bug. If that is the case, follow the next steps:

• Step 1: Try opening Spotify.
• Step 2: If it’s not working, open App Switcher or Recent Apps. Different Android devices open it differently. Thus, you can swipe up from your Home screen, or if you have three buttons at the bottom, press Recent Apps.

• Step 3: Find Spotify in Recent Appsand click X or swipe up over it to force-close it.
• Step 4: Try opening Spotify again.

3. Re-Login to Your Spotify

The Spotify app may be working fine. Maybe you’re having problems with your Spotify account. If so, you can try logging out and logging in again to see if that works. That isn’t a big problem; sometimes Spotify accounts start bugging. You can re-login to your Spotify account by following these steps:

• Step 1: Open Spotify.
• Step 2: Tap Settingsin the upper right corner.

• Step 3: Scroll to the bottom of the settings and tap Log Out.

• Step 4: Tap Log In.

• Step 5: Enter your login credentials.
• Step 6: Tap Loginagain, and you’re in.

4. Restart Your Device

Another way to stop Spotify from crashing can be restarting your Android. The steps may vary slightly depending on the Poco M6 Pro 4G device, but they’re mostly the same. Follow these steps to restart your device:

• Step 1: Press and hold the Power button(you must press and hold both the Power and Volume Up buttons on a newer Android device).
• Step 2: Tap Restart. That will restart your Android, and you can try opening Spotify again.

5. Set Up Your Time and Date

Another possible reason for your Spotify closing problem could be the incorrect time and date on your Android. That is also an easy fix; you must set it correctly and try opening the app again. Set up your time and date with these steps:

• Step 1: Open Settingson your Android.
• Step 2: Go to Systemor General Management (depending on your Android model).
• Step 3: Go to Date and Time.
• Step 4: Tap Set Dateand set the correct date.

• Step 5: Go to Set Timeand set the right time.

6. Update Your System Software

Your Spotify app might keep crashing because your system is outdated. Try updating it to the latest version to try and fix the crashing problem. The steps for the Android system update are as follows:

• Step 1: Open Settings.

• Step 2: Go to System or About Phone.

• Step 3: Select System Update.
• Step 4: If there’s an available update, tap

7. Update Your App

If your system is updated, then Spotify might need an update. The app might malfunction if you’re using an older version. Thus, updating the app might solve the Spotify crashing problem. You can update Spotify by following these steps:

• Step 1: Go to the Play Store.

• Step 2: Search and open Spotify in the Play Store.
• Step 3: Tap Update

8. Free up Storage

Spotify can start crashing if your Android’s storage space is at capacity. That can also cause other apps to crash, not only Spotify. Therefore, check the storage space and free up as much as possible. Follow these steps:

• Step 1: Open
• Step 2: Go to Device Maintenance > Storageor go directly to Storage.

• Step 3: Here, you can see how much of your storage space is available and what’s taking up the most space.

• Step 4: Then, you can go ahead and clear as much space as you can.

9. Reinstall Spotify

There’s another solution if the Spotify app keeps crashing. You can try uninstalling and reinstalling it again on your Android. That will reset the app and might solve your problem. Follow the next steps to reinstall Spotify:

• Step 1: Find the Spotify app on your Android.
• Step 2: Hold the app icon.
• Step 3: Then, press Uninstall.

• Step 4: Press OK.
• Step 5: Then, open the PlayStore and find Spotify.
• Step 6: Tap Installto reinstall the app again.

• Step 7: Once it installs, log in to test if it’s working.

10. Check if Spotify Is Down

If your Spotify keeps crashing and closing, it might not be your device’s problem. Sometimes, Spotify’s server can be down, and many people face the same issue. If that’s the case, you can check with your friends if their Spotify is working or check online if Spotify is down. To do that, follow these steps:

• Step 1: Open your web browser.
• Step 2: Type “Is Spotify down” in the search bar.

• Step 3: You’ll see several websites that check real-time app servers and if they’re down.

• Step 4: Go to one or two and see what they say. If Spotify is down, you’ll need to wait for them to fix the problem.

11. Clear the Cache

When using different apps and websites, your device caches data from those sources. Since there’s no need to pile up your Spotify cache, you can clear it. Follow these steps:

• Step 1: Open Settings.

• Step 2: Go to Apps.
• Step 3: Find Spotify and tap it.

• Step 4: Tap Storageor Storage usage.

• Step 5: Tap Clear Cache.

safe & secure

Conclusion

If your Spotify app keeps crashing, several reasons might be behind it. For instance, your storage space might be at capacity, your system might need an update, your phone might have a software bug, or the Spotify server might be down.

We’ve given you 11 solutions to fix the Spotify crashing problem. However, if your system needs repairing, you can try Wondershare Dr.Fone for quick and easy repair. This solution and all others will surely help you fix the crashing problem.

Also read: