How to Fix the Soft Bricked Realme 10T 5G?

Bricked phone is a serious problem, as your brick smartphone could be suffering from a soft brick or hard brick problem, and must be dealt with carefully. It is very common to see a brick smartphone these days. If you are wondering what exactly is a bricked phone, here is your answer.

A bricked phone, hard brick or soft brick, is a smartphone which refuses to start or boot all the way up the home/main screen of the Realme 10T 5G device. This issue is observed within most Android phones because users have a tendency to tamper with the Realme 10T 5G device settings, flashing new and customized ROMs and tweaking with the essential files. Playing around with the phone’s internal set-up leads to such errors, worst of them being a brick smartphone. Usually, a bricked phone does not switch on and stays frozen at the Realme 10T 5G device logo, a blank screen or even worse, doesn’t respond to any command, even the power on command.

If you are confused about the soft brick and hard brick problems and looking for solutions to fix your priced phone, then here is all you need to know.

Read on to find out more.

Part 1: What is the difference between soft brick and hard brick?

To begin with, let us understand the basic difference between a soft brick and hard brick issue. Both versions of a bricked phone prevent it from booting but differ in their causes and gravity of the problem.

A soft-brick problem is caused merely by a software error/crash and makes your device switch on automatically every time you manually turn it off. This phenomenon is referred to as Boot Loop. Soft bricked Android phones are not as difficult to fix as the hard bricked Android phones. It is convenient to say that a soft bricked phone only boots up half-way and not fully, whereas a hard bricked device does not switch on at all. A hard brick error is thus caused when the kernel, which is nothing but an interface for the software to communicate with the hardware, is tampered with. A hard bricked phone is not recognized by your PC when plugged in and is a serious problem. It requires troubleshooting techniques and cannot be easily fixed as the soft brick problem.

Hard bricked phones are a rare sight, but the soft brick is very common. Given below are ways to fix a soft brick Android phone. The techniques listed here are the best and the most efficient ways to get your phone back to its normal working conditions without losing your important data or damaging your device or its software.

Part 2: Stuck at the Boot Loop

This is the first sign of a soft bricked Android phone. Boot Loop is nothing but when your phone does not remain switched off and turns itself on automatically, and freezes at the logo screen or blank screen, every time you manually try to power it off.

Stuck at boot loop problem can be fixed by clearing your Cache partitions. These partitions are nothing but storage locations for your modem, kernels, system files, drivers and built-in Apps data.

It is advisable to clear Cache partitions regularly to keep your phone free from such glitches.

Since the phone refuses to boot, Cache can be cleared from entering into the Recovery Mode. Different Android devices have different ways to put it in recovery mode. Normally pressing the power key and volume down key helps, but you may refer to your phone’s guide for better understanding and then follow the steps given below to clear the cache partition:

Once you are the recovery mode screen, you will see a number of options as shown in the screenshot.

Use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

>

After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you erase all the clogged up and unwanted files. You may loose some App related data, but that is a small price to pay to fix your bricked phone.

If this method does not boot up your brick smartphone and the problem still persists, there are two more things you can try. Read ahead to find out about them.

Part 3: Booting straight into recovery mode

If your bricked phone does not boot up to your Home Screen or Lock screen and instead boots directly into Recovery Mode, there is not much left to do. Booting straight into recovery mode is undoubtedly a soft brick error but it also indicates a possible problem with your current ROM. The only option you have to flash a new ROM to reboot your bricked phone back to its normal functioning.

To flash a new ROM:

Firstly, you must root your phone and unlock the Bootloader. Every phone’s mechanism to unlock the bootloader is different, thus, we suggest to refer to your user manual.

Once the Bootloader is unlocked, take a backup of all your data by selecting “Backup” or “Android” back in recovery mode. The process should not take long and all you need to do is tap “OK” to config backup.

In this step, download a ROM of your choice and store it in your SD Card. Insert the SD Card in your phone to begin the flashing process.

Once at the recovery mode, select “Install Zip from SD Card” from the options.

Scroll down using the volume key and use the power key to select the downloaded ROM.

This might take a few minutes of your time, but once the process is complete, reboot your phone.

Hopefully, your bricked phone will not boot normally and work smoothly.

Part 4: Booting straight into Bootloader

If your bricked phone boots straight into Bootloader, then this a serious issue and must not be taken lightly. Flashing a new ROM or clearing cache partitions are of little help in such a brick smartphone situation. Booting straight into Bootloader is a peculiar soft bricked Android phone feature and can be tackled only by downloading and flashing your original ROM from the manufacturer. In order to do so, a detailed study about your manufacturer’s ROM, ways to download and flash must be carried out. Since different Android phones come with different types of ROMs, it difficult to cover all the aspects about the different types of ROMs.

Brick smartphone problem has become more prominent than phone freezing or hanging issue. Android users are often seen looking for solutions to fix their soft brick and hard brick phones. Android phones are prone to get bricked and thus, it is important for us to know about the three techniques given above. These methods have been tried, tested and recommended by ay affected bricked phone users. Therefore, these tips are reliable and worth a try. So if your phone acts stubborn and refuses to boot normally, examine the problem carefully and adopt one of the solutions given above which best suits your situation.

11 Proven Solutions to Fix Google Play Store Not Working Issue on Realme 10T 5G

Google Play Store is a necessary and bundled service of any Android device. This app is required to download or even run any apps. So, getting an error like Play store not working or Play Store crashing is very unfortunate and a matter of a headache. Here we tried to put the best solution to overcome this issue. Keep reading this article for all the 11 best solutions.

Part 1. The recommended method to fix Google Play Store issues

If you search on the internet, you may find various tricks dealing with Google Play Store not working issue. However, either to try each of them or choose several to follow would certainly cost a lot of time. What’s more, we are not sure whether they will really work. Therefore, we would recommend you with a more effective and fast way, that is to use Dr.Fone - System Repair (Android) , a dedicated Android repair tool to fix Google Play Store, not working issues just in one click.

Dr.Fone - System Repair (Android)

A most effective method to fix Google Play Store not working

• Fix all Android system issues like the black screen of death, won’t turn on, system UI not working, etc.
• Industry’s 1st tool for one-click Android repair.
• Supports all the new Realme 10T 5G devices like Galaxy S8, S9, etc.
• Step-by-step instructions provided. No technicals skills required.

3981454 people have downloaded it

Brief steps to guide you through the process of fixing Google Play Store not working (followed by video tutorial):

1. Get this tool downloaded on your computer. Install and launch it, and you can find the following welcome screen displayed.

1. Select the option “System Repair”. In the new interface, click on the “Android Repair” tab.

1. Start fixing Google Play Store not working by clicking “Start”. Select and confirm the correct model details as instructed.

1. Activate the Download mode from your Realme 10T 5G.

1. After entering the Download mode, the Dr.Fone tool starts to download the correct firmware to your Android.

1. The downloaded firmware will be loaded and flashed to your Realme 10T 5G to fix the Google Play Store not working issue.

1. Wait until the Android repair process is complete. Start your Android and Google Play Store, you can then find that the Google Play Store not working issue no longer exists.

Video tutorial to fix Google Play Store not working

Part 2: Other 10 common methods to fix Google Play Store issues

1. Fix Date and Time settings

Sometimes Google creates a problem connecting with the Play Store or Play store crashing due to the wrong date and time. The first and most common thing is you have to check if the date and time are updated or not. If not, update it first by following the below step by step guide.

Step 1 – First, go to the “Settings” of your device. Find ‘Date and time’ and tap on it.

Step 2 – Now you can see several options. Select “Automatic date and time”. This should override the wrong date and time your device have. Else, deselect the tick beside that option and select the date and time manually.

Step 3 – Now, go to the Play store and try to connect again. This should be working without any problem now.

2. Cleaning of Cache data of Play Store

This may happen that sometimes Google Play Store stopped working due to excessive unnecessary data stored in the cache of the Realme 10T 5G device. So, clearing unnecessary data is very important to keep the application run smoothly. To do this, you need to follow the below steps.

Step 1 – Firstly, go to “Settings” on your device.

Step 2 – Now, navigate to the “Apps” option available at the settings menu.

Step 3 – Here you can find the “Google Play Store” app listed. Open it by tapping.

Step 4 – Now, you can find a screen like below. Tap on “Clear cache” to remove all the cache from the application.

Now, again try to open Google Play Store and you may successfully overcome the Play Store not working issue. If not, check the next solution.

3. Reset Play store by Clear data

If the above solution is not working for you, you might try this option instead. This step will erase all the app data, settings, etc so that it can be set up a fresh one. This will also fix the Google Play store not working issue. For this solution, use the following method step by step.

Step 1 – Like the previous method, head towards the settings and then find “Apps”

Step 2 – Now find “Google Play Store” and open it.

Step 3 – Now, instead of tapping “Clear cache”, tap on “Clear data”. This will erase all the data and settings from the Google Play store.

After this, open “Google Play Store” and now your problem might be solved now.

4. Reconnecting the Google account

Sometimes it may happen that removing and reconnecting your Google account may solve the Play Store not working issue. To do this, you need to follow the instructions below.

Step 1 – Go to the “Settings” and then find “Accounts”.

Step 2 – Upon opening the option, select “Google”. Now you can see your Gmail ID listed there. Tap on it.

Step 3 – Now click on the top right side three dots or “more” option. Here you can find the “Remove account” option. Select it to remove the Google Account from your Mobile.

Now, go back and try to open Google Play Store again. This should work now and enter your Google ID and password again to continue. If it’s still not working, move to the next solution.

5. Reinstall the latest version of Google Play Store

Google Play store can’t be uninstalled completed completely from your Realme 10T 5G. But disabling and reinstalling its latest version can resolve the Play Store crashing issue. For doing this, just follow the below guide.

Step 1 – First of all, go to “Settings” and then move on to “Security”. Then find “Device administration” here.

Step 2 – Upon clicking on this option, you can find “Android device manager”. Uncheck this and disable.

Step 3 – Now you can be able to uninstall Google play service by going into application manager.

Step 4 – After that, try to open any app that requires Google Play store to open, and that will automatically guide you to install the Google Play service. Now install the updated version of the Google Play service.

After installing, your problem might be solved by now. If not, try the next solution.

6. Clear Google Service Framework Cache

Besides the Google Play store, this is important to keep healthy the Google Service Framework as well. The cache and unnecessary data should be removed from there also. Follow the steps below.

Step 1 – Go to settings and then tap on “Application Manager”

Step 2 – Here you can find “Google Service Framework”. Open it.

Step 3 – Now, tap on “Clear cache”. And you are done.

Now go back and try to open Google Play store again. This might solve the Google Play Store has stopped the problem by now. If not, check the next solution.

7. Disable the VPN

The VPN is a service to get all the media outside your geographic location. This is also used to install a country-specific app in another country. But sometimes it can create a problem with Play Store crashing.  So, this is recommended to try disabling the VPN.

Step 1 – Go to the settings of your device.

Step 2 – Under the “networks”, click on “More”.

Step 3 – Here you can find “VPN”.  Tap on it and turn it off.

Now, again go back and try to open the Google Play Store. This may solve your problem now. If not, check the next solution.

8. Force stop Google Play Service

Google Play Store needs to be restart just like your PC. This is a really helpful and common trick to overcome the Play Store crashing issue on your Realme 10T 5G. To do this, follow the below steps.

Step 1- Go to settings and then go to the “Application Manager”.

Step 2 – Now find “Google Play Store” and click on it.

Step 3 – Here click on “Force Stop”. This allows the Google Play Store to stop.

Now, try to open Google Play store again and this time the service is being restarted and might work properly. If not, try the next solution.

9. Try a Soft Reset of your device

This easy to use solution will remove all the unnecessary temporary files of your device, close all recent apps, and make it clean. This is just rebooting your device. It won’t delete any data from your device.

Step 1 – Long press the “Power” button on your device.

Step 2 – Now, click on ‘Reboot’ or ‘Restart’ option. Your device will restart in some time.

After restarting, try to open the Google Play Store again and this time you should succeed. If any case, it’s not opening, try the last (but not the least) method by hard reset your Android.

10. Hard reset your device

If you have done with all of the above solutions and still Play Store crashing, and you are aggressive to get it, then only try this method. Using this method will delete all the data of your device. So take a backup of the whole. Follow the step by step instruction below.

Step 1 – Go to setting and find “backup and reset” there.

Step 2 – Click on it. And then Click on the “Factory data reset” option.

Step 3 – Now confirm your action and tap on the “Reset device”.

This will take a while to reset your device completely. After completion, start the Google Play Store and set up as a new device.

The above methods are the best 11 among all the solutions you can get for your Play Store not working on wifi or Play Store crashing error. Try one by one and you might get rid of this problem.

Reliable User Guide to Fix Realme 10T 5G Running Slow and Freezing

Android smartphones have opened a lot of doors for their users. They continue to evolve year after year with the hope of giving the world a wonderful digital experience. So far, we can all agree that they’re going the extra mile and doing a really great job. Android phones today are all packed with supreme capabilities that are beneficial to everyone.

However, Android phones are still not close to perfect. They also act up sometimes and cause a stir. Some users have observed that the Android phone is running slow and freezing over time. There can be many potential reasons why Android phone runs slow suddenly. But it doesn’t mean it cannot be restored at all to its original state and function.

In this article, we will review the details of this Android phone issue. We’ll provide solutions you can try if you ever get caught in the same problem. Continue reading to learn more.

Understanding the Specs That Make Android Phones Run Fast

The issue of Android phone running slow and freezing is not limited to old devices only. The same problem has also been observed in newly purchased units. The roots of this unfortunate occurrence vary from one user to another. It depends on different elements, from external factors like users’ handling of the Realme 10T 5G device to internal factors such as its capabilities. To understand it more, below are some Android phone specifications related to the Realme 10T 5G device’s overall performance and speed.

The CPU Core Count

Unlike before, Android phones today are equipped with several cores. Each of them has the ability to execute a process alone. Therefore, the Realme 10T 5G device can handle two or more tasks at once without compromising the quality of its performance. If your Realme 10T 5G contains more CPU core, its performance surely be more powerful and speedy.

The CPU Clock Speed

Simply put, clock speed is basically the speed at which the CPU cores can carry out a cycle in a second. A faster clock speed definitely translates into the Realme 10T 5G device’s higher performance. For instance, an octa-core Android phone with a one GHz per second clock speed is a decent device. But it’s less powerful than a device with the same number of cores but runs at two GHz per second.

Random Access Memory

In a simple language, Random Access Memory (RAM) temporarily stores the data from apps that are currently running. Smartphones can be more flexible with multi-tasking if their RAM has enough space. So if you’re among these users who perform multiple tasks simultaneously, you better choose a device with more RAM.

Internal Storage

The mobile applications installed on your smartphones are directly related to internal storage. The apps save their data every time, so they behave strangely when the Realme 10T 5G device runs out of storage. If you’re using heavy mobile applications, it’s best to opt for smartphones with huge internal storage.

Reasons Why My Realme 10T 5G is Running Slow

It’s not really hard to tell why your Realme 10T 5G is slow because it’s apparently a common issue among users. But don’t worry. Most of the time, the problem is not a major concern. Here are some scenarios that may slow down your Realme 10T 5Gs.

Overloading Background Processes

It’s great to have an Android phone that can flawlessly multi-task. However, not all units can handle that well. As mentioned earlier, it depends on the CPU core count and the core’s clock speed. If your Realme 10T 5G is running slow and freezing, many processes may be happening at the same time. Your device’s cores and clock speed are potentially incapable of executing such demands.

Your Phone is Running Out of Storage

Mobile apps need to save data on your phone. They perform the tasks based on the data stored on the Realme 10T 5G device. So if your Realme 10T 5G is slow, it’s possible that your device is already running out of storage. Each app has its own storage requirement. If your phone goes below that, the app will surely crash and not work.

Animation Speed is Way Too Slow

You can modify the Realme 10T 5G device’s animation type and speed on your Realme 10T 5G via the developer’s option. However, altering its default settings can sometimes make the Android phone run slow. If the speed is set slower, more delays are added to the animation. Hence, it takes a while for Your Realme 10T 5G to launch an app or complete a certain process.

You’re Using an Outdated Android Version

If your Realme 10T 5G is running slow and freezing, the Realme 10T 5G device’s software is probably outdated. The mobile apps installed on your device are lagging or crashing because they’re no longer compatible with the OS. It happens most of the time. Hence, always watch out for OS updates.

Your Phone is Experiencing Some System Issues

Operating systems and device software serve as the main component of all smartphones. Sometimes, it runs into inevitable problems caused by computer bugs and other glitches. When it happens, the Realme 10T 5G device’s overall performance is affected. So that can be the reason why sometimes your Realme 10T 5G is running slow and freezing.

Your Internet Connection is Unstable

Of course, a slow internet connection can make the Android phone runs slow too. Most apps today rely heavily on the internet to execute some tasks like communicating and streaming. So don’t panic when your Realme 10T 5G is running slow and freezing. It’s possible that your internet connection is messing up with you.

What to Do When My Realme 10T 5G Lags?

It’s not as bad as the black screen of death when the Android phone runs slow. However, it can still cause some delays and inconvenience for users. So it’s really important to take action when you notice some anomalies with its speed and performance. Below are some remedies that can help you get rid of this issue.

Solution 1: Reboot Your Phone

Sometimes, minor bugs can give your device a hard time. It can be the reason why your Realme 10T 5G is running slow and freezing. If that’s the case, rebooting your phone might help a lot. Here’s how to do it.

• Step 1: For seven seconds or more, hold the Power and the Volume Down button together.

• Step 2: Several options will manifest on the screen. From there, click Restart. Wait until your device completely shuts off and restarts again.

Solution 2: Uninstall the Unused Apps to Free Up Some Storage

If your Realme 10T 5G is running slow and freezing, it’s likely because you’re running out of internal storage. You may uninstall the apps you rarely use to free up some space. Here’s how to do it.

• Step 1: On your home screen, find the app you wish to uninstall. Hold its icon until an option list appears.
• Step 2: Click Uninstall.

• Step 3: Click Ok if it asks you to confirm the action.

Wait until the app icon disappears from the home screen.

Solution 3: Set the Animation Speed a Little Faster

Altering the animation speed is not that dangerous. However, it can sometimes interfere with the Realme 10T 5G device’s smoothness if set too slow. If your Realme 10T 5G is running slow and freezing after modifying this setting, try to re-adjust it a little faster. Here’s how to do it.

Initiate the following steps first to enable the developers option on your device. Skip this if you have already activated the developers option:

• Step 1: Go to Settings.
• Step 2: Find the About Phone option. Click on it.

• Step 3: Find the Build Number. And then click on it seven times.
• Step 4: Enter your lock screen passcode if necessary.

Follow these steps to adjust the animation speed:

• Step 1: Tap Settings from your home screen.
• Step 2: From the given options, find and click Systems.
• Step 3: Click Developers options.
• Step 4: Under the Drawing section, you’ll find the following animation scale settings: Window Animation Scale, Transition Animation Scale, and Animator Duration Scale. Adjust the speed of these three options to 0.5x.

Solution 4: Update Your Phone to the Latest Android Version

It’s always recommended to update your phone to the latest Android version. Aside from repairs to some system errors, it also keeps your phone compatible with mobile apps. An outdated operating system can be the reason why your Realme 10T 5G runs slow, and the apps are freezing. Don’t worry. It’s very easy to perform. Here’s how to do it.

• Step 1: First, ensure your internet connection is strong and stable to avoid unwanted interruptions.
• Step 2: Go to Settings.
• Step 3: Click About Phone.
• Step 4: Click Check Now for Update. If there’s new software available, it will automatically appear on the screen.
• Step 5: Click Install Now. Depending on your device, it will restart itself after the installation process.

Solution 5: Reset Your Realme 10T 5G to Factory Settings

One way to restore the original performance of your Realme 10T 5G is to revert it back to factory settings. It deletes all the phone’s data and adjusts the settings to default. Most of the time, this procedure works magic. It fixes numerous issues, including the Android phone that’s slow and constantly freezing. But ensure your phone has already been backed up before commencing this step. You may use Wondershare Dr.Fone to help you back up and secure your files.

Here’s how to back up your Realme 10T 5G using Wondershare Dr.Fone:

• Step 1: Download Wondershare Dr.Fone from its official website. And then install it on your desktop.
• Step 2: Launch the application on your computer.
• Step 3: After it fully loads, connect your Realme 10T 5G to your computer.
• Step 4: From the main dashboard, find and click Phone Backup. Ensure your device is in USB Debugging mode.

Step 5: Check the files or data you wish to back up. Right after, click Backup.

Here’s how to reset your Realme 10T 5G to factory settings:

• Step 1: Go to Settings.
• Step 2: Click System.
• Step 3: Click Reset Options.
• Step 4: Click Erase All Data (Factory Reset).
• Step 5: Your Android phone will inform you about the data that will be deleted from this procedure. From there, click Reset Phone.
• Step 6: Your Android device will ask you to confirm the procedure. From there, click Erase Everything.

Solution 6: Fix the System Issue Using Wondershare Dr.Fone

The device’s operating system may sometimes run into unexpected problems. That can make your Realme 10T 5G performs slow. System issue is not a terrifying scenario at all. Thanks to Wondershare Dr.Fone, which provides instant repair to this kind of mobile problem. Here’s how to use it in easy steps.

• Step 1: Launch the Wondershare Dr.Fone application on your desktop. And then connect your Realme 10T 5G to your computer.
• Step 2: Click System Repair from the main dashboard or Toolbox section.

Click here

• Step 3: Click Android.

• Step 4: Wondershare Dr.Fone will give you a list of the Android problems that this procedure will fix. From there, click Start.

• Step 5: Wondershare Dr.Fone will ask you to confirm your device details. Review the listed details for Brand, Name, Model, Country, and Carrier. Amend them if necessary. Tick the checkbox beside the Note if you agree to the terms. Lastly, click Next to proceed.

• Step 6: At this point, you need to put your device into Download Mode. Power off your device. And then hold these three buttons altogether: Volume Down, Home (or Bixby if you’re using a newer model), and Power buttons. Finally, press the Volume Up button.

• Step 7: Wondershare Dr.Fone will automatically download the firmware that matches your device’s specifications. Wait until the process has been completed.

• Step 8: Thereafter, the details about the newly downloaded firmware package will be displayed on the screen. From there, click Fix Now.

• Step 9:  Before initiating the installation process, Wondershare Dr.Fone will ask you to review and confirm the firmware details. It will also let you know that this procedure will erase the phone’s data. If you agree to the terms, enter 000000 into the input box and click Confirm.

• Step 10: Wait while Wondershare Dr.Fone installs the new firmware to your device.

• Step 11: A notification will immediately appear after installing the new firmware. Click Done if your phone starts normally. Otherwise, click Try Again to repeat the process.

safe & secure

3,660,347 people have downloaded it

Conclusion

Android phone is capable of performing lots of stuff. It can assist you in both your personal and professional tasks. But if it’s sluggish and doesn’t execute optimally, the good things it promises all go down the drain. So if you notice that your Realme 10T 5G is running slow and freezing, act fast to resolve the issue. Wondershare Dr.Fone can be of great help in this kind of situation. It’s an all-in-one mobile solution that can assist you with system repair, phone backup, data recovery, and a lot more.

Also read: