How to Flash Dead Nokia G42 5G Safely

• Fix malfunctioning Android to normal in one click.
• Highest success rate to fix all Android issues.
• Step-by-step guidance through the fixing process.
• No skills required to operate this program.

A phone is considered to be dead when it becomes completely unresponsive and refuses to switch on. Similarly, an Android phone is said to be dead when it does not boot up. You may try to switch it on several times by pressing the power button but in vain. You will see no sign of the phone’s logo or anything like a welcome screen. The Android phone’s screen remains black and does not illuminate when you try to turn it on. Interestingly, even when you charge this dead device, it does not show that it is getting charged.

Many people regard this as a battery issue, and many think of it as a temporary software crash. Some users also seem to believe that this is because of a virus attack. However, if you are looking for ways that tell how to fix a dead Android phone, you must understand that a dead phone or device can be cured by flashing custom firmware safely. If you are keen to know how to flash a dead Android phone or how to flash dead Android phones using PC, here are ways to help you.

Given below are eight techniques to flash your Nokia G42 5G safely, depending upon which phone you are using. It may seem time-consuming and tedious, but we can assure you that it works. So, move ahead and read on to learn about flashing new firmware, your Nokia G42 5G, MTK Android, and Nokia G42 5G safely.

safe & secure

Part 1: Can a Dead Phone Be Flashed?

Flashing a dead Android phone might be skeptical for many users who have been in such a situation. Although it is possible to flash a dead Android phone, it is essential to be aware of the reasons that lead you into such a situation. Before a remedy, diagnosing the problem is a necessity for retaining the Nokia G42 5G device.

From battery issues to physical damage to the Nokia G42 5G device, there can be many reasons your Nokia G42 5G died. The reasons for a dead Android phone are not restricted to these points. There can be software-related issues or firmware issues that might cause such havoc on your Android.

Part 2: How to flash Nokia G42 5G in one click

While you are worried about how to flash Nokia G42 5G instantly with a single click, Dr.Fone - System Repair (Android) swiftly makes its way with a galore of options for you. This amazing tool from Wondershare can fix a plethora of Android system issues such as crashing of apps, black screen of death, failed system update, etc. Moreover, it can also get your device out of boot loop, unresponsive bricked Android mobiles as well as stuck at the Nokia G42 5G logo.

Dr.Fone - System Repair (Android)

One-click solution to flash Nokia G42 5G

• The high success rate in fixing Nokia G42 5G Android devices.
• All the latest Nokia G42 5G devices are supported by this software.
• One-click operation of this tool helps you how to flash Nokia G42 5G easily.
• Being very intuitive, it doesn’t need you to be tech-savvy to use this software.
• It is one of its kind and the first one-click Android repair software on the market.

3981454 people have downloaded it

Step-by-step Tutorial

We are going to explain how to flash a dead Android phone using a PC using Dr.Fone - System Repair (Android)

Note: Before you understand how to flash Dead Android phone, take a backup of your data and then proceed to avoid any data loss.

Phase 1: Prepare your Nokia G42 5G

Step 1: Once you have downloaded and installed Dr.Fone, launch it. From the main menu, tap on ‘System Repair’ and get your Nokia G42 5G connected to it.

Step 2: Click ‘Android Repair’ from the available options, and then press the ‘Start’ button to fix the Dead Android phone by flashing it.

Step 3: On the Nokia G42 5G device information screen, pick the appropriate device brand, name, model, and other details followed by tapping the ‘Next’ button.

Phase 2: Put the Android device in Download mode to start repair.

Step 1: It is essential to boot your Nokia G42 5G in Download mode before repairing.

• If the Nokia G42 5G device has a ‘Home’ button: Turn it off and then hold down the ‘Volume Down’, ‘Home’, and ‘Power’ buttons altogether for 5-10 seconds. Un-hold all of them and hit the ‘Volume Up’ button for entering ‘Download’ mode.

• In the absence of a ‘Home’ button: Switch off the Android device and hold the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons for 5 to 10 seconds, then release them. Hit the ‘Volume Up’ button for entering the ‘Download’ mode.

Step 2: Press the ‘Next’ button for initiating firmware download.

Step 3: Once the firmware gets downloaded and verified Dr.Fone - System Repair (Android) starts to flash your Dead Android phone. All the Android system issues will be fixed soon after.

safe & secure

Part 3: How to flash Nokia G42 5G dead phone with Odin?

In this segment, we will learn how to fix the dead Android phone, i.e., Nokia G42 5G phones using Odin software. Odin is software used internally by Nokia G42 5G to generally unblock devices and perform a more utility-based job, namely, flashing new firmware in place of the old one. There are different variants available, so choose the one which is supported by your Galaxy phone. Here is a step-by-step explanation of how to flash dead Android phone (Nokia G42 5G) using Odin software.

Step 1: Install the driver software on the computer. You can find the best driver software for your device and PC on the official Nokia G42 5G website. You may also download Nokia G42 5G Kies on your PC. Once you have downloaded and installed the driver software, restart the PC.

Step 2: Now download suitable firmware for your device in the form of a zip folder that you can open and store on your desktop.

Make sure the file is .bin, .tar, or .tar.md5 only as these are the only file types recognized by Odin.

Step 3: In this step, download the latest version of Odin on your PC and move it to the desktop, and then right-click on the downloaded Odin file to select “Run as Administrator”.

Step 4: Now, boot your dead device to Download Mode by pressing the power, volume down, and home button together. When the phone vibrates, release the power button only.

Step 5: Gently press the volume up button, and you will see the Download Mode Screen.

Step 6: Now, you may use a USB to connect your Nokia G42 5G to the PC. Odin will recognize your device, and in the Odin window, you will see a message saying “Added”.

Step 7: In this step, find the tar.md5 file you downloaded by clicking on “PDA” or “AP” on the Odin window and then click “Start”.

Finally, once the flashing process is complete, your Nokia G42 5G phone will reboot and start normally, and you may see a “Pass” or “Reset” message on the Odin window on the PC.

Part 4: How to flash MTK Android dead phone with SP Flash tool?

SP Flash tool, also known as SmartPhone Flash tool is a popular freeware tool used to flash custom ROM or firmware in MTK Android phones. It is a very successful tool and is extremely easy to use.

Let us look at the steps given below to learn how to flash dead Android phones using PC with the help of the SP Flash tool.

Step 1: To start with, download and install the MTK driver on your PC and then download the ROM/firmware you wish to use for flashing purposes.

Step 2: Once done, you should download the SP Flash tool and extract it on your PC and move on to launch the Flash_tool.exe file to open the SP Flash tool window.

Step 3: Now, on the SP Flash tool window, click on “Download” and select “Scatter-loading”.

Step 4: The last step would be to locate the file downloaded by you and click “Open” and then finally, select “Download” on the SP Flash tool window.

After completing the above steps, connect your dead device to the PC with a USB cable and wait for it to get recognized. The flashing process will take a few minutes to finish and then you will see a green circle indicating “OK Download”.

That’s it! Now simply disconnect your phone and wait for it to reboot.

Part 5: How to flash Nokia G42 5G dead phone with the Phoenix tool?

Phoenix tool, better known as PhoenixSuit, is a tool similar to the SP False tool and Odin. It works very well with Nokia G42 5G and is the best answer to “How to fix dead Android phone?”, “How to flash dead Android phone using PC?”, etc.

Let’s look at the steps of flashing the Nokia G42 5G dead phone with the Phoenix tool.

First, download and install the Nokia G42 5G PC Suite driver on your PC. Then you will need to download the PhoenixSuit tool and then launch it.

Now, on the toolbar, click “Tools” and select “Data Package Download” from the drop-down list.

Then move to download the firmware for your dead Nokia G42 5G and save it in a new Folder. Once done, go back to the Phoenix tool window and click on “File” and select “Open Product”.

Simply, feed in the details and then click “OK”.

After this, click on “Flashing” and select “Firmware update” and then browse to select the appropriate product code and then click “OK” again.

Then move on to select “Dead Phone USB Flashing” from the Firmware Update Box.

Lastly, just click on “Refurbish” and connect your phone to the PC using a USB cable.

That was it, the flashing process may take up to a few minutes after which your dead Nokia G42 5G will restart automatically.

Part 6: How to flash a dead phone that won’t turn on via factory reset?

Using tools for flashing Android devices can be a solution; however, it is heavily restricted to the Nokia G42 5G device models. For a generalized solution, there can be other options that you can go with. Factory resetting an Android device by putting it in Recovery Mode is one way. To know how to flash a dead Android phone using factory reset, go through the steps featured below:

Step 1: To initiate the process, you will have to put your Nokia G42 5G in Recovery Mode. Generally, Android phones are put in Recovery Mode by holding the “Power” and “Volume Up” keys for a few seconds after turning them off. The key combinations can vary according to your Nokia G42 5G.

Step 2: As the Android boot menu opens on your screen, use the “Volume Down” and “Volume Up” keys to scroll up and down the menu. On accessing the “Wipe Data/Factory Reset” option, use the “Power” key to select the particular option.

Step 3: Continue to select the “Yes” option for confirming the factory reset of the Android device. The phone will automatically reboot after successfully factory resetting.

Part 7: How to flash a dead Android phone by checking screen faulty

The screen of your Nokia G42 5G may be faulty, due to which it is not launching. While seeking the right way of how to fix a dead Android phone, you can force restart your phone using the Volume buttons according to your device model.

If the Android vibrates on restarting and the screen does not lighten up, the problem can be directed to a hardware fault. The screen is broken and needs physical assistance to resolve the issue.

Part 8: How to fix a dead Android phone by changing the battery

Another solution that can help you fix the dead Android phone is changing its battery. The battery of an Android device can last up to 3 years. When its capacity drops to a bare minimum, it is best to change the battery of your Android. Upon trying to restart your Nokia G42 5G, if it does not, you might need to replace your battery. All Android phone batteries are removable, which should be regulated with proper supervision.

Part 9: How to repair dead Android phone by contacting official support

If you are unable to discover any proper solution for how to flash dead Android phones, you might have to consult the respective customer support of the Android phone manufacturers. Consult customer support to discover why the phone is dead and how it can be flashed. The respective personnel will assist you in resolving the issue, which might require monetary input from your side.

Conclusion

A dead Android phone might be the cause of worry, but the techniques given above to flash your dead Android device safely are very helpful. These methods have been tried and tested by users all over the world and thus, we recommend them to you. If your phone is dead or has become unresponsive, do not panic. Depending on your phone’s brand, here are ways to guide you on how to fix the dead Android phone and how to flash dead Android phone using PC.

It has been observed that Wondershare Dr.Fone – System Repair (Android) assists in the best way. Resolve all your concerns involving your dead Android phone and flash it to make it operable again.

Carefully follow the instructions given, and you will be able to reboot your dead Android phone successfully.

Calls on Nokia G42 5G Go Straight to Voicemail? 12 Fixes

Have you ever experienced incoming calls to your phone go straight to voicemail without ringing? It can be frustrating, especially if you’re expecting an important call. It could be due to simple things like turning down the volume or forgetting to turn off the Do Not Disturb mode. In other cases, it might be because you accidentally blocked the caller’s number.

In most cases, incoming calls going to voicemail without ringing are common. However, if it’s happening frequently or for all calls, your phone may have a problem.

This article will discuss why incoming phone calls go straight to voicemail and how to fix the problem. We’ll also show you how to use Wondershare Dr.Fone, a powerful Android System Repair tool, to solve such issues. So, if you’re uncertain why that last call went straight to voicemail, keep reading, and we’ll cover everything you need to know.

Part 1: Not Ringing? Here’s Why Calls on Your Phone Go Straight to Voicemail

If an incoming call to your cell phone goes straight to voicemail without ringing, there could be a few reasons. Here’s what to look for and what you should do to fix it:

1. Turn Off Do Not Disturb (DND) Mode

DND mode is a feature that silences all incoming calls, notifications, and alerts. If DND mode is enabled, your cell phone goes straight to voicemail when someone calls. To turn off DND mode, swipe down from the top of the screen to open the notification settings panel, then tap the Do not disturb icon.

Here’s an alternative way:

• Step 1: Open the Settings app and go to Notifications.
• Step 2: Tap Do not disturb.

• Step 3: Toggle Do Not Disturb offto disable the mode.

2. Turn Off Call Forwarding

One reason calls go straight to voicemail without ringing is if you enabled call forwarding. Call forwarding is a feature that redirects incoming calls to another number. To turn off call forwarding:

• Step 1: Open the Phone Dialer app on your device, then tap the menu icon and select Settings.

• Step 2: Navigate to Supplementary services > Call forwarding.

3. Disable Call Barring

If a phone call went straight to voicemail, another possible explanation is the call barring. It is a feature that restricts calls from being made or received on your phone. If activated, it can cause incoming calls to a phone to go straight to voicemail. To turn off call barring on Nokia G42 5G devices:

• Step 1: Open the Phone Dialer app, then tap the menu icon in the top right corner.
• Step 2: Go to Settings > Supplementary services > Call barring, then tap OK.
• Step 3: Select Voice call, then turn off your preferred outgoing and incoming calls. When prompted, enter 0000 as a password.

4. Update Your Phone’s Software

Sometimes, software bugs can cause problems with incoming calls, which may be why your last incoming call went straight to voicemail. If your phone runs outdated software, try updating it to the latest version.

To check for updates, open the Settings app and go to Software update or System update. For a seamless update experience, follow the step-by-step instructions on your mobile screen.

5. Reset Network Settings

If the incoming calls on your phone go straight to voicemail, consider resetting your phone’s network settings. Network settings control how your phone connects to the cellular network. If these settings are not set up correctly, incoming calls may not be able to reach your device.

Note: Resetting your network settings will erase any saved Wi-Fi networks and Bluetooth pairings, requiring you to re-enter them after the reset is complete.

To reset your network settings on most Android devices:

• Step 1: Open the Settings app on your smartphone, then tap System or General Management.
• Step 2: Go to Reset > Reset Network Settings and confirm the action.

6. Turn Off Bluetooth

When Bluetooth is on, it can interfere with your device’s ability to receive calls, causing them to go straight to voicemail without ringing. To turn off Bluetooth on an Android device, you can do one of the following:

• Swipe down from the top of the screen to open the Quick Settingspanel, then tap the Bluetooth icon to turn it off.

• Go to Settings> Connections > Bluetooth and toggle the switch off.

It should help ensure that calls come through to your phone instead of going to voicemail.

7. Check Airplane Mode

If turning off Bluetooth didn’t solve the issue, another possible cause could be that your phone is in Airplane Mode. Airplane Mode turns off all wireless connections on your phone, including cellular service, which can cause calls to dial straight to voicemail. There are two ways to turn off Airplane mode on Android:

Using the Settings app:

• Step 1: Open the Settings app.
• Step 2: Tap Network & internet.
• Step 3: Toggle off Airplane mode or Flight mode.

Using the Quick Settings panel:

• Step 1: Swipe down from the top of the phone screen to access the Quick Settings panel.
• Step 2: Look for the Airplane mode or Flight mode icon, then tap it to turn it off.

8. Check Blocked Numbers

“My boyfriend’s phone goes straight to voicemail when someone is calling. Any idea why that might be?”

Do you also find yourself asking what does it mean? It could be that he has blocked that phone number. To check this:

• Step 1: Open the Phone dialer app.
• Step 2: Tap the menu icon in the top right corner and select Settings.
• Step 3: Tap Block numbers. If you find the number in the blocked list, remove it to ensure that their calls come through to the phone.

If you still have trouble reaching your boyfriend, try calling him from a different number. If your call didn’t go through, you know that he hasn’t blocked your number and that there may be another issue with his phone.

9. Turn Off Google One VPN

If you’re using Google One VPN, try turning it off to see if that fixes the problem. Some users have reported that Google One VPN can cause incoming calls to a phone to go straight to voicemail. To turn off Google One VPN:

• Step 1: Open the Google One app on your Nokia G42 5G.
• Step 2: At the bottom, go to the Benefits tab, then tap View Details below the Online protection with a VPN section.

• Step 3: Toggle off Enable VPN.

10. Contact Your Carrier

If your phone calls go straight to voicemail after trying all the above, contact your carrier for help. They may be able to troubleshoot the problem or determine if there is a service outage in your area.

And if your carrier confirms that there is no service outage or billing-related block, the problem may be with your phone itself. You may need to try resetting your phone to factory settings or taking it to a repair shop.

11. The Caller Used Ringless Voicemail

Ringless voicemail is a service that allows businesses to bypass your phone’s ringtone and send you pre-recorded messages directly to voicemail. Ringless voicemail is often used for marketing purposes. If you think you’re receiving ringless voicemail calls, you can contact the company calling you and ask them to remove you from their list.

Part 2: Not Clear About the Root Cause? Troubleshoot Directly by Wondershare Dr.Fone

If you’re unsure what’s causing your calls to go straight to voicemail, you can try using the Dr.Fone System Repair tool. This software can scan and repair your phone for any underlying problems, which may fix the issue and get your calls ringing again.

Dr.Fone supports over 1000 Android models, including unlocked Nokia G42 5G models and models from carriers like AT&T and Vodafone. It has an intuitive interface and is easy to use, even for beginners. Learn below the steps on how to use Dr.Fone System Repair to fix incoming calls that dial straight to voicemail:

• Step 1: Download Dr.Fone on your computer, then launch it once installed.

safe & secure

4,118,635 people have downloaded it

• Step 2: Connect your smartphone to your desktop or computer using a USB cable. Next, from the Toolbox homepage, select System Repair.

• Step 3: Select Android as the Nokia G42 5G device type.

• Step 4: Click Start to begin repairing your smartphone.

• Step 5: Select the Nokia G42 5G device details on the Name, Model, Country, and Carrier drop-down lists. Next, select the agreement checkbox, then click Next to proceed.

• Step 6: Follow the in-app instructions to enter Download mode on your Nokia G42 5G, then click Next.

• Step 7: Wait while the app downloads the firmware; once done, click Fix Now.

• Step 8: Enter the code in the input box to verify the Nokia G42 5G device information in the dialogue box, then click Confirm.

• Step 9: The app will start repairing the system issue on your Nokia G42 5G. Once completed, your app should restart, then click Done to close the app.

You May Also Like:

Top 5 Best Android System Repair Apps

How to Fix It: Android Stuck on Boot Screen?

How to Flash Dead Android Phone Safely

Conclusion

When your phone calls go straight to voicemail without ringing, it can be a frustrating and disruptive experience. Not only do you miss important calls from work, friends, or family, but it also leaves you feeling disconnected and out of the loop. As a temporary measure to avoid missing important calls, check your voicemail regularly.

For a prompt solution, consider using Dr.Fone if incoming calls on your phone go straight to voicemail. It is a powerful mobile solution that can also address other system problems, including stuck boot loops, app crashes, black screens, and bricked devices. If you consistently experience this issue, it’s advisable to reach out to a professional for assistance.

safe & secure

4,215,287 people have downloaded it

Spotify Keeps Crashing: A Complete List of Fixes You Can Use on Nokia G42 5G

Does your Spotify keep crashing? You’re not alone. This problem is widespread and can happen to anyone. Fortunately, there are ways to rectify it quickly and easily. We’ve prepared a guide to fixing your Spotify crashing problem.

In our guide, you’ll find out why your Spotify keeps crashing. Moreover, you’ll get a list of fixes for your Spotify closing problem and detailed instructions. Once you’ve read our guide, you’ll successfully solve the problem of Spotify crashing on Android.

Part 1. Why Spotify Keeps Crashing

Some people have encountered a problem with their Spotify accounts. Spotify can sometimes keep crashing and closing due to several reasons. For example, it can happen due to your phone not being compatible with the app. This can happen if your operating system isn’t updated to the newest version.

Another reason the Spotify app keeps crashing could be an antivirus or a VPN blocking Spotify from working. Moreover, your device might be out of storage space, causing your phone to slow down and crash apps.

Several other reasons for this problem include network issues, a weak Wi-Fi signal, or the battery saving mode. Furthermore, your apps and files might be corrupted, or an app on your phone might block Spotify from working correctly.

Part 2. Spotify Keeps Crashing: Best Fixes

As you can see, there are numerous reasons for your Spotify crashing. Fortunately, all of them are easy fixes, and there’s no need to worry. We’ve prepared a list of 11 ways to fix your Spotify. With these fixes and detailed instructions, you’ll be able to eliminate your Spotify problem with ease.

1. Fix the Spotify Closing Issue by Repairing Your System

The reason for your Spotify crashing may be more significant than just a bug. Your device system might be behind it. If that’s the case, you might need to repair your system before trying to fix Spotify.

If you want to repair your mobile device’s system quickly and efficiently, try Wondershare Dr.Fone.

Wondershare Dr.Fone is an app that gives you complete control over your phone. You can manage it, back it up, recover files, and repair your system. The system repair option will fix your Android in just a few clicks and allow you to use Spotify freely. The steps go as follows:

• Step 1: Install and open Wondershare Dr.Fone on your computer and connect your Android.
• Step 2: Go to the Toolbox section and select System Repair.

• Step 3: Choose the Android

• Step 4: See which Android errors Wondershare Dr.Fone can fix and click Start.

• Step 5: Select the **Brand,**Name, Model, Country, and Carrier In the Carrier section, choose OPEN if your device is unlocked.

• Step 6: Tick the “I agree with the warning, and I am ready to proceed”checkbox and click Next.
• Step 7: Put your Android in Download Mode. You can find the steps below these instructions.
• Step 8: The program will automatically download once you put the phone in Download Mode.

• Step 9: Once the firmware downloads, click Fix Nowto install it on your Android.

• Step 10: Type “000000” in the dialog box and click Confirm.

• Step 11: That will start the system reparation, which you can follow on the screen.

• Step 12: Once it finishes, click Doneto complete the system repair.

There are two ways to enter Download Mode: one for Android devices with the Home button and another for those without it.

The steps for entering Download Mode on an Android phone with the Home button are as follows:

• Step 1: Turn off your phone.
• Step 2: Press and hold the Volume Down,Home, and Power buttons simultaneously.
• Step 3: Press the Volume Upbutton to enter Download Mode.

The steps for entering Download Mode on Android devices without the Home button are as follows:

• Step 1: Turn off your phone.
• Step 2: Press and hold the Volume Down, Bixby, andPower buttons simultaneously.
• Step 3: Press the Volume Upbutton to enter Download Mode.

2. Force-Close the App

You can force-close Spotify and open it again to make it work properly. That is an easy fix if your Spotify has developed a bug. If that is the case, follow the next steps:

• Step 1: Try opening Spotify.
• Step 2: If it’s not working, open App Switcher or Recent Apps. Different Android devices open it differently. Thus, you can swipe up from your Home screen, or if you have three buttons at the bottom, press Recent Apps.

• Step 3: Find Spotify in Recent Appsand click X or swipe up over it to force-close it.
• Step 4: Try opening Spotify again.

3. Re-Login to Your Spotify

The Spotify app may be working fine. Maybe you’re having problems with your Spotify account. If so, you can try logging out and logging in again to see if that works. That isn’t a big problem; sometimes Spotify accounts start bugging. You can re-login to your Spotify account by following these steps:

• Step 1: Open Spotify.
• Step 2: Tap Settingsin the upper right corner.

• Step 3: Scroll to the bottom of the settings and tap Log Out.

• Step 4: Tap Log In.

• Step 5: Enter your login credentials.
• Step 6: Tap Loginagain, and you’re in.

4. Restart Your Device

Another way to stop Spotify from crashing can be restarting your Android. The steps may vary slightly depending on the Nokia G42 5G device, but they’re mostly the same. Follow these steps to restart your device:

• Step 1: Press and hold the Power button(you must press and hold both the Power and Volume Up buttons on a newer Android device).
• Step 2: Tap Restart. That will restart your Android, and you can try opening Spotify again.

5. Set Up Your Time and Date

Another possible reason for your Spotify closing problem could be the incorrect time and date on your Android. That is also an easy fix; you must set it correctly and try opening the app again. Set up your time and date with these steps:

• Step 1: Open Settingson your Android.
• Step 2: Go to Systemor General Management (depending on your Android model).
• Step 3: Go to Date and Time.
• Step 4: Tap Set Dateand set the correct date.

• Step 5: Go to Set Timeand set the right time.

6. Update Your System Software

Your Spotify app might keep crashing because your system is outdated. Try updating it to the latest version to try and fix the crashing problem. The steps for the Android system update are as follows:

• Step 1: Open Settings.

• Step 2: Go to System or About Phone.

• Step 3: Select System Update.
• Step 4: If there’s an available update, tap

7. Update Your App

If your system is updated, then Spotify might need an update. The app might malfunction if you’re using an older version. Thus, updating the app might solve the Spotify crashing problem. You can update Spotify by following these steps:

• Step 1: Go to the Play Store.

• Step 2: Search and open Spotify in the Play Store.
• Step 3: Tap Update

8. Free up Storage

Spotify can start crashing if your Android’s storage space is at capacity. That can also cause other apps to crash, not only Spotify. Therefore, check the storage space and free up as much as possible. Follow these steps:

• Step 1: Open
• Step 2: Go to Device Maintenance > Storageor go directly to Storage.

• Step 3: Here, you can see how much of your storage space is available and what’s taking up the most space.

• Step 4: Then, you can go ahead and clear as much space as you can.

9. Reinstall Spotify

There’s another solution if the Spotify app keeps crashing. You can try uninstalling and reinstalling it again on your Android. That will reset the app and might solve your problem. Follow the next steps to reinstall Spotify:

• Step 1: Find the Spotify app on your Android.
• Step 2: Hold the app icon.
• Step 3: Then, press Uninstall.

• Step 4: Press OK.
• Step 5: Then, open the PlayStore and find Spotify.
• Step 6: Tap Installto reinstall the app again.

• Step 7: Once it installs, log in to test if it’s working.

10. Check if Spotify Is Down

If your Spotify keeps crashing and closing, it might not be your device’s problem. Sometimes, Spotify’s server can be down, and many people face the same issue. If that’s the case, you can check with your friends if their Spotify is working or check online if Spotify is down. To do that, follow these steps:

• Step 1: Open your web browser.
• Step 2: Type “Is Spotify down” in the search bar.

• Step 3: You’ll see several websites that check real-time app servers and if they’re down.

• Step 4: Go to one or two and see what they say. If Spotify is down, you’ll need to wait for them to fix the problem.

11. Clear the Cache

When using different apps and websites, your device caches data from those sources. Since there’s no need to pile up your Spotify cache, you can clear it. Follow these steps:

• Step 1: Open Settings.

• Step 2: Go to Apps.
• Step 3: Find Spotify and tap it.

• Step 4: Tap Storageor Storage usage.

• Step 5: Tap Clear Cache.

safe & secure

Conclusion

If your Spotify app keeps crashing, several reasons might be behind it. For instance, your storage space might be at capacity, your system might need an update, your phone might have a software bug, or the Spotify server might be down.

We’ve given you 11 solutions to fix the Spotify crashing problem. However, if your system needs repairing, you can try Wondershare Dr.Fone for quick and easy repair. This solution and all others will surely help you fix the crashing problem.

Also read: