How to Flash Dead Xiaomi Redmi A2+ Safely

• Fix malfunctioning Android to normal in one click.
• Highest success rate to fix all Android issues.
• Step-by-step guidance through the fixing process.
• No skills required to operate this program.

A phone is considered to be dead when it becomes completely unresponsive and refuses to switch on. Similarly, an Android phone is said to be dead when it does not boot up. You may try to switch it on several times by pressing the power button but in vain. You will see no sign of the phone’s logo or anything like a welcome screen. The Android phone’s screen remains black and does not illuminate when you try to turn it on. Interestingly, even when you charge this dead device, it does not show that it is getting charged.

Many people regard this as a battery issue, and many think of it as a temporary software crash. Some users also seem to believe that this is because of a virus attack. However, if you are looking for ways that tell how to fix a dead Android phone, you must understand that a dead phone or device can be cured by flashing custom firmware safely. If you are keen to know how to flash a dead Android phone or how to flash dead Android phones using PC, here are ways to help you.

Given below are eight techniques to flash your Xiaomi Redmi A2+ safely, depending upon which phone you are using. It may seem time-consuming and tedious, but we can assure you that it works. So, move ahead and read on to learn about flashing new firmware, your Xiaomi Redmi A2+, MTK Android, and Xiaomi Redmi A2+ safely.

safe & secure

Part 1: Can a Dead Phone Be Flashed?

Flashing a dead Android phone might be skeptical for many users who have been in such a situation. Although it is possible to flash a dead Android phone, it is essential to be aware of the reasons that lead you into such a situation. Before a remedy, diagnosing the problem is a necessity for retaining the Xiaomi Redmi A2+ device.

From battery issues to physical damage to the Xiaomi Redmi A2+ device, there can be many reasons your Xiaomi Redmi A2+ died. The reasons for a dead Android phone are not restricted to these points. There can be software-related issues or firmware issues that might cause such havoc on your Android.

Part 2: How to flash Xiaomi Redmi A2+ in one click

While you are worried about how to flash Xiaomi Redmi A2+ instantly with a single click, Dr.Fone - System Repair (Android) swiftly makes its way with a galore of options for you. This amazing tool from Wondershare can fix a plethora of Android system issues such as crashing of apps, black screen of death, failed system update, etc. Moreover, it can also get your device out of boot loop, unresponsive bricked Android mobiles as well as stuck at the Xiaomi Redmi A2+ logo.

Dr.Fone - System Repair (Android)

One-click solution to flash Xiaomi Redmi A2+

• The high success rate in fixing Xiaomi Redmi A2+ Android devices.
• All the latest Xiaomi Redmi A2+ devices are supported by this software.
• One-click operation of this tool helps you how to flash Xiaomi Redmi A2+ easily.
• Being very intuitive, it doesn’t need you to be tech-savvy to use this software.
• It is one of its kind and the first one-click Android repair software on the market.

3981454 people have downloaded it

Step-by-step Tutorial

We are going to explain how to flash a dead Android phone using a PC using Dr.Fone - System Repair (Android)

Note: Before you understand how to flash Dead Android phone, take a backup of your data and then proceed to avoid any data loss.

Phase 1: Prepare your Xiaomi Redmi A2+

Step 1: Once you have downloaded and installed Dr.Fone, launch it. From the main menu, tap on ‘System Repair’ and get your Xiaomi Redmi A2+ connected to it.

Step 2: Click ‘Android Repair’ from the available options, and then press the ‘Start’ button to fix the Dead Android phone by flashing it.

Step 3: On the Xiaomi Redmi A2+ device information screen, pick the appropriate device brand, name, model, and other details followed by tapping the ‘Next’ button.

Phase 2: Put the Android device in Download mode to start repair.

Step 1: It is essential to boot your Xiaomi Redmi A2+ in Download mode before repairing.

• If the Xiaomi Redmi A2+ device has a ‘Home’ button: Turn it off and then hold down the ‘Volume Down’, ‘Home’, and ‘Power’ buttons altogether for 5-10 seconds. Un-hold all of them and hit the ‘Volume Up’ button for entering ‘Download’ mode.

• In the absence of a ‘Home’ button: Switch off the Android device and hold the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons for 5 to 10 seconds, then release them. Hit the ‘Volume Up’ button for entering the ‘Download’ mode.

Step 2: Press the ‘Next’ button for initiating firmware download.

Step 3: Once the firmware gets downloaded and verified Dr.Fone - System Repair (Android) starts to flash your Dead Android phone. All the Android system issues will be fixed soon after.

safe & secure

Part 3: How to flash Xiaomi Redmi A2+ dead phone with Odin?

In this segment, we will learn how to fix the dead Android phone, i.e., Xiaomi Redmi A2+ phones using Odin software. Odin is software used internally by Xiaomi Redmi A2+ to generally unblock devices and perform a more utility-based job, namely, flashing new firmware in place of the old one. There are different variants available, so choose the one which is supported by your Galaxy phone. Here is a step-by-step explanation of how to flash dead Android phone (Xiaomi Redmi A2+) using Odin software.

Step 1: Install the driver software on the computer. You can find the best driver software for your device and PC on the official Xiaomi Redmi A2+ website. You may also download Xiaomi Redmi A2+ Kies on your PC. Once you have downloaded and installed the driver software, restart the PC.

Step 2: Now download suitable firmware for your device in the form of a zip folder that you can open and store on your desktop.

Make sure the file is .bin, .tar, or .tar.md5 only as these are the only file types recognized by Odin.

Step 3: In this step, download the latest version of Odin on your PC and move it to the desktop, and then right-click on the downloaded Odin file to select “Run as Administrator”.

Step 4: Now, boot your dead device to Download Mode by pressing the power, volume down, and home button together. When the phone vibrates, release the power button only.

Step 5: Gently press the volume up button, and you will see the Download Mode Screen.

Step 6: Now, you may use a USB to connect your Xiaomi Redmi A2+ to the PC. Odin will recognize your device, and in the Odin window, you will see a message saying “Added”.

Step 7: In this step, find the tar.md5 file you downloaded by clicking on “PDA” or “AP” on the Odin window and then click “Start”.

Finally, once the flashing process is complete, your Xiaomi Redmi A2+ phone will reboot and start normally, and you may see a “Pass” or “Reset” message on the Odin window on the PC.

Part 4: How to flash MTK Android dead phone with SP Flash tool?

SP Flash tool, also known as SmartPhone Flash tool is a popular freeware tool used to flash custom ROM or firmware in MTK Android phones. It is a very successful tool and is extremely easy to use.

Let us look at the steps given below to learn how to flash dead Android phones using PC with the help of the SP Flash tool.

Step 1: To start with, download and install the MTK driver on your PC and then download the ROM/firmware you wish to use for flashing purposes.

Step 2: Once done, you should download the SP Flash tool and extract it on your PC and move on to launch the Flash_tool.exe file to open the SP Flash tool window.

Step 3: Now, on the SP Flash tool window, click on “Download” and select “Scatter-loading”.

Step 4: The last step would be to locate the file downloaded by you and click “Open” and then finally, select “Download” on the SP Flash tool window.

After completing the above steps, connect your dead device to the PC with a USB cable and wait for it to get recognized. The flashing process will take a few minutes to finish and then you will see a green circle indicating “OK Download”.

That’s it! Now simply disconnect your phone and wait for it to reboot.

Part 5: How to flash Xiaomi Redmi A2+ dead phone with the Phoenix tool?

Phoenix tool, better known as PhoenixSuit, is a tool similar to the SP False tool and Odin. It works very well with Xiaomi Redmi A2+ and is the best answer to “How to fix dead Android phone?”, “How to flash dead Android phone using PC?”, etc.

Let’s look at the steps of flashing the Xiaomi Redmi A2+ dead phone with the Phoenix tool.

First, download and install the Xiaomi Redmi A2+ PC Suite driver on your PC. Then you will need to download the PhoenixSuit tool and then launch it.

Now, on the toolbar, click “Tools” and select “Data Package Download” from the drop-down list.

Then move to download the firmware for your dead Xiaomi Redmi A2+ and save it in a new Folder. Once done, go back to the Phoenix tool window and click on “File” and select “Open Product”.

Simply, feed in the details and then click “OK”.

After this, click on “Flashing” and select “Firmware update” and then browse to select the appropriate product code and then click “OK” again.

Then move on to select “Dead Phone USB Flashing” from the Firmware Update Box.

Lastly, just click on “Refurbish” and connect your phone to the PC using a USB cable.

That was it, the flashing process may take up to a few minutes after which your dead Xiaomi Redmi A2+ will restart automatically.

Part 6: How to flash a dead phone that won’t turn on via factory reset?

Using tools for flashing Android devices can be a solution; however, it is heavily restricted to the Xiaomi Redmi A2+ device models. For a generalized solution, there can be other options that you can go with. Factory resetting an Android device by putting it in Recovery Mode is one way. To know how to flash a dead Android phone using factory reset, go through the steps featured below:

Step 1: To initiate the process, you will have to put your Xiaomi Redmi A2+ in Recovery Mode. Generally, Android phones are put in Recovery Mode by holding the “Power” and “Volume Up” keys for a few seconds after turning them off. The key combinations can vary according to your Xiaomi Redmi A2+.

Step 2: As the Android boot menu opens on your screen, use the “Volume Down” and “Volume Up” keys to scroll up and down the menu. On accessing the “Wipe Data/Factory Reset” option, use the “Power” key to select the particular option.

Step 3: Continue to select the “Yes” option for confirming the factory reset of the Android device. The phone will automatically reboot after successfully factory resetting.

Part 7: How to flash a dead Android phone by checking screen faulty

The screen of your Xiaomi Redmi A2+ may be faulty, due to which it is not launching. While seeking the right way of how to fix a dead Android phone, you can force restart your phone using the Volume buttons according to your device model.

If the Android vibrates on restarting and the screen does not lighten up, the problem can be directed to a hardware fault. The screen is broken and needs physical assistance to resolve the issue.

Part 8: How to fix a dead Android phone by changing the battery

Another solution that can help you fix the dead Android phone is changing its battery. The battery of an Android device can last up to 3 years. When its capacity drops to a bare minimum, it is best to change the battery of your Android. Upon trying to restart your Xiaomi Redmi A2+, if it does not, you might need to replace your battery. All Android phone batteries are removable, which should be regulated with proper supervision.

Part 9: How to repair dead Android phone by contacting official support

If you are unable to discover any proper solution for how to flash dead Android phones, you might have to consult the respective customer support of the Android phone manufacturers. Consult customer support to discover why the phone is dead and how it can be flashed. The respective personnel will assist you in resolving the issue, which might require monetary input from your side.

Conclusion

A dead Android phone might be the cause of worry, but the techniques given above to flash your dead Android device safely are very helpful. These methods have been tried and tested by users all over the world and thus, we recommend them to you. If your phone is dead or has become unresponsive, do not panic. Depending on your phone’s brand, here are ways to guide you on how to fix the dead Android phone and how to flash dead Android phone using PC.

It has been observed that Wondershare Dr.Fone – System Repair (Android) assists in the best way. Resolve all your concerns involving your dead Android phone and flash it to make it operable again.

Carefully follow the instructions given, and you will be able to reboot your dead Android phone successfully.

How To Fix Unresponsive Touch Screen on Xiaomi Redmi A2+

With the increase in our reliance on smartphones, having touchscreen problems on your device can be annoying. Sometimes, it’s even more frustrating than a physically broken screen because you don’t know where the issue is coming from.

If your touchscreen is malfunctioning or doesn’t work correctly, you cannot interact with your device. On this page, you’ll learn general phone touch problems on Android and how to get rid of them. Now explore the article to learn more.

Part 1: Why Is My Android Experiencing Touch Screen Problems

Below are some of the most common reasons you’re experiencing touch problems on your Android smartphone.

• The touchscreen problemfreezes your phone, lags, or hangs.
• Some parts of the screen work fine, but some don’t.
• Your screen responds inaccurately (typing “a” gets you “q” or “z”).
• The touchscreen is automatically operating itself, resulting in ghost touch.
• It doesn’t respond to any taps, and the phone’s screen has stopped working.
• The device is physically damaged, or the screen is cracked or broken.
• Outdated devices are prone to the black/white/blue screen of death.

Part 2: Tips, Fixes, and Workarounds To Fix Your Xiaomi Redmi A2+ Touch Problems

If any of the outlined reasons above are the cause of your touch screen malfunctioning, here are some solutions to fix it.

Click here

Method 1: Remove the Screen Protector and Phone Case

Some phone cases and screen protectors cause touch problems on your Android screen. This issue is prevalent if you recently changed your phone case or screen protector. It may be due to incompatibility, but you should remove them to see if your phone starts responding again.

Method 2: Clean Your Android Smartphone

A touchscreen malfunctioning can also be a sign of a dirty display. Since the screen relies on contact between your fingers and the touchpad to perform actions, this also applies to foreign particles such as dirt, debris, smudges, oil, and more. Clean your touchscreen with wipes or a soft cloth by gently wiping over the screen.

Method 3: Stop Using Your Android Device for a While

Touch problems also arise due to abnormal temperature changes. Your phone might experience ghost touch if it’s too cold or hot. For your screen to function correctly, it needs to be in a temperate environment. Remember to take breaks between phone usage, especially when the phone gets too hot. Avoid using your device under hot conditions, direct sunlight, or anything affecting your phone’s normal temperature.

Method 4: Restart Your Android

Performing a reboot sounds trivial with such a complicated issue. But sometimes, it’s often the most successful way to fix a touchscreen problem on an Android device. Restarting your Android shuts down and resets all background services, which may have led to your issue.

To restart your Android, press and hold the Power button for several seconds to switch off your phone. In other smartphones, you may need to hold down the Power button as well as the Volume Down button at the same time.

Method 5: Factory Data Reset Your Android

Before attempting to have your device checked for any hardware defects, you should try completing a Factory Reset. To do this, go to Settings > Backup and Reset. Next, tap on Factory data reset > Delete all.

Performing a Factory Data Reset will erase all your data and restore your device to its factory default settings. Creating a backup before doing this step is recommended, as you will lose all your personal data once the process starts.

Method 6: Put Your Android into Recovery Mode

If all else fails, placing your Android into Recovery Mode should be a last resort. Doing this method works similarly to the method above. You should perform this method if the screen is unresponsive and only the buttons on your Android are functional. Here’s how.

Note

Placing your Android into Recovery Mode is different depending on your Android smartphone. Refer to your owner’s manual to see which method is right for your Xiaomi Redmi A2+.

Step 1A: Press and hold the Power button and Volume Down buttons at the same time. Continue holding both buttons until the screen starts.

Step 1B: If your Xiaomi Redmi A2+ still has a Home button, press and hold the Home button and the Power button at the same time. Continue holding them until the screen starts.

Step 1C: If step 1A did not put your Android into Recovery Mode, press and hold the Power and Volume Up and Down buttons simultaneously. Continue pressing all three until the screen starts.

Step 2: Use the Volume buttons to navigate the choices, select Wipe data/factory reset, and confirm your choice with the Power button.

Step 3: Wait for the process to complete and for your Xiaomi Redmi A2+ to restart automatically.

Method 7: Replace Your Android Touchscreen

If doing all the earlier workarounds and fixes couldn’t resolve the touchscreen problem, it could be the screen itself. While replacing the touchscreen yourself is possible if you have the technical know-how, it’s still best to bring it to a professional to prevent further damage. You should have your Xiaomi Redmi A2+ checked by a technician if the screen is getting weak, has water damage, or has failing screen components.

“

Method 8: Bring it to an Authorized Service Center

Your phone touch problem might not be caused by the screen, even when you had it replaced. If your Android is still unresponsive, it’s best to bring your smartphone to an authorized service center or directly to the phone manufacturer, especially when all efforts are exhausted.

Part 3: How To Fix Android Touch Problem With an Alternative

If all the general phone touch problems on your Xiaomi Redmi A2+ persist, you should strongly consider Wondershare Dr.Fone to do the job. The program can fix all Android system issues without any required skills. Problems caused by the operating system or software, such as the black screen of death, boot loop, ghost touch, and more, are done within less than 10 minutes with the program.

Key Features

Dr.Fone – System Repair (Android) has many features you can immediately take advantage of. Here are some of them below.

• Fix All Android Problems In Minutes

Wondershare Dr.Fone allows you to fix all touchscreen problems on your smartphone within less than 10 minutes. Moreover, it has a high success rate making it one of the most reliable tools available today.

• Supports up to 1000+ Android Models

The program supports almost all Xiaomi Redmi A2+ models and other Android devices, whether unlocked or from a carrier. Dr.Fone is equipped with all the proper firmware to flash your Xiaomi Redmi A2+ with just a few clicks. In addition, it has handy on-screen instructions to help you complete the whole process with ease.

Pros and Cons

Here are the pros and cons of using Dr.Fone – System Repair (Android) to know if you’re still undecided.

Pros

• The user interface is clutter-free, making it highly beginner-friendly.
• The fast processing time to fix your Xiaomi Redmi A2+ means you can do more in less time.

Cons

• The free version only works until you see if your Xiaomi Redmi A2+ is compatible with the app. You will be required to enter a valid license once you initiate the repair process.
• If you own an iOS device, you’ll have to get the iOS version.

How To Fix Black Phone Screen With Wondershare Dr.Fone

Follow the step-by-step guide below to start fixing general phone screen problems on Android using Wondershare Dr.Fone.

Step 1: Download and install Wondershare Dr.Fone on your computer. Next, launch the program and connect your Xiaomi Redmi A2+ to your computer.

Step 2: Click Start to initiate the setup on a new window. From there, select the Brand, Name, Model, Country, and Carrier of your Xiaomi Redmi A2+ and click Next.

Step 3: Follow the on-screen instructions on the main program window to initiate the repair process. After that, wait for your Android smartphone to return to its original state.

Part 4: FAQs

Here are some FAQs you should remember when experiencing phone touch problems.

1. Does a Cracked Screen Affect Touch on an Android?

If you continue using a smartphone with a cracked screen, there are several implications. Your device will be vulnerable to further damage and might develop touchscreen problems,and your sensors will gradually begin to malfunction. The capabilities of your device are also compromised the longer you delay repairing it. Moreover, a cracked screen can put your fingers at risk of injury due to potential glass splinters.

2. How Do I Temporarily Fix a Cracked Screen?

If you can’t take your cracked screen to a repair shop, apply a small amount of vegetable oil or petroleum jelly to the screen. Doing this will not fix the issue but will make the cracks less noticeable. On the other hand, you can also apply a screen protector to safeguard your phone against further damage. The screen protector slows down or prevents the cracks from getting worse.

3. Can I Use Dr.Fone for Free?

You can download and install Dr.Fone – System Repair (iOS) or (Android) for free to evaluate the program’s offerings. You can do the first few steps to see if the app supports your device. However, you need to get the full version and enter a valid license code to repair your smartphone.

safe & secure

4,471,551 people have downloaded it

Conclusion

If the touchscreen is malfunctioning on your smartphone, one of the fixes above should help solve the problem. If it did not solve the issue, consider using Dr. Fone – System Repair for iOS or Android when you need an all-in-one solution to all your phone screen problems.

However, if your screen is broken or cracked, going to an authorized service center is still your best bet, especially when your screen urgently needs a replacement. Delaying it further may hurt your wallet in the long run, so it’s best to fix it as soon as possible.

11 Proven Solutions to Fix Google Play Store Not Working Issue on Xiaomi Redmi A2+

Google Play Store is a necessary and bundled service of any Android device. This app is required to download or even run any apps. So, getting an error like Play store not working or Play Store crashing is very unfortunate and a matter of a headache. Here we tried to put the best solution to overcome this issue. Keep reading this article for all the 11 best solutions.

Part 1. The recommended method to fix Google Play Store issues

If you search on the internet, you may find various tricks dealing with Google Play Store not working issue. However, either to try each of them or choose several to follow would certainly cost a lot of time. What’s more, we are not sure whether they will really work. Therefore, we would recommend you with a more effective and fast way, that is to use Dr.Fone - System Repair (Android) , a dedicated Android repair tool to fix Google Play Store, not working issues just in one click.

Dr.Fone - System Repair (Android)

A most effective method to fix Google Play Store not working

• Fix all Android system issues like the black screen of death, won’t turn on, system UI not working, etc.
• Industry’s 1st tool for one-click Android repair.
• Supports all the new Xiaomi Redmi A2+ devices like Galaxy S8, S9, etc.
• Step-by-step instructions provided. No technicals skills required.

3981454 people have downloaded it

Brief steps to guide you through the process of fixing Google Play Store not working (followed by video tutorial):

1. Get this tool downloaded on your computer. Install and launch it, and you can find the following welcome screen displayed.

1. Select the option “System Repair”. In the new interface, click on the “Android Repair” tab.

1. Start fixing Google Play Store not working by clicking “Start”. Select and confirm the correct model details as instructed.

1. Activate the Download mode from your Xiaomi Redmi A2+.

1. After entering the Download mode, the Dr.Fone tool starts to download the correct firmware to your Android.

1. The downloaded firmware will be loaded and flashed to your Xiaomi Redmi A2+ to fix the Google Play Store not working issue.

1. Wait until the Android repair process is complete. Start your Android and Google Play Store, you can then find that the Google Play Store not working issue no longer exists.

Video tutorial to fix Google Play Store not working

Part 2: Other 10 common methods to fix Google Play Store issues

1. Fix Date and Time settings

Sometimes Google creates a problem connecting with the Play Store or Play store crashing due to the wrong date and time. The first and most common thing is you have to check if the date and time are updated or not. If not, update it first by following the below step by step guide.

Step 1 – First, go to the “Settings” of your device. Find ‘Date and time’ and tap on it.

Step 2 – Now you can see several options. Select “Automatic date and time”. This should override the wrong date and time your device have. Else, deselect the tick beside that option and select the date and time manually.

Step 3 – Now, go to the Play store and try to connect again. This should be working without any problem now.

2. Cleaning of Cache data of Play Store

This may happen that sometimes Google Play Store stopped working due to excessive unnecessary data stored in the cache of the Xiaomi Redmi A2+ device. So, clearing unnecessary data is very important to keep the application run smoothly. To do this, you need to follow the below steps.

Step 1 – Firstly, go to “Settings” on your device.

Step 2 – Now, navigate to the “Apps” option available at the settings menu.

Step 3 – Here you can find the “Google Play Store” app listed. Open it by tapping.

Step 4 – Now, you can find a screen like below. Tap on “Clear cache” to remove all the cache from the application.

Now, again try to open Google Play Store and you may successfully overcome the Play Store not working issue. If not, check the next solution.

3. Reset Play store by Clear data

If the above solution is not working for you, you might try this option instead. This step will erase all the app data, settings, etc so that it can be set up a fresh one. This will also fix the Google Play store not working issue. For this solution, use the following method step by step.

Step 1 – Like the previous method, head towards the settings and then find “Apps”

Step 2 – Now find “Google Play Store” and open it.

Step 3 – Now, instead of tapping “Clear cache”, tap on “Clear data”. This will erase all the data and settings from the Google Play store.

After this, open “Google Play Store” and now your problem might be solved now.

4. Reconnecting the Google account

Sometimes it may happen that removing and reconnecting your Google account may solve the Play Store not working issue. To do this, you need to follow the instructions below.

Step 1 – Go to the “Settings” and then find “Accounts”.

Step 2 – Upon opening the option, select “Google”. Now you can see your Gmail ID listed there. Tap on it.

Step 3 – Now click on the top right side three dots or “more” option. Here you can find the “Remove account” option. Select it to remove the Google Account from your Mobile.

Now, go back and try to open Google Play Store again. This should work now and enter your Google ID and password again to continue. If it’s still not working, move to the next solution.

5. Reinstall the latest version of Google Play Store

Google Play store can’t be uninstalled completed completely from your Xiaomi Redmi A2+. But disabling and reinstalling its latest version can resolve the Play Store crashing issue. For doing this, just follow the below guide.

Step 1 – First of all, go to “Settings” and then move on to “Security”. Then find “Device administration” here.

Step 2 – Upon clicking on this option, you can find “Android device manager”. Uncheck this and disable.

Step 3 – Now you can be able to uninstall Google play service by going into application manager.

Step 4 – After that, try to open any app that requires Google Play store to open, and that will automatically guide you to install the Google Play service. Now install the updated version of the Google Play service.

After installing, your problem might be solved by now. If not, try the next solution.

6. Clear Google Service Framework Cache

Besides the Google Play store, this is important to keep healthy the Google Service Framework as well. The cache and unnecessary data should be removed from there also. Follow the steps below.

Step 1 – Go to settings and then tap on “Application Manager”

Step 2 – Here you can find “Google Service Framework”. Open it.

Step 3 – Now, tap on “Clear cache”. And you are done.

Now go back and try to open Google Play store again. This might solve the Google Play Store has stopped the problem by now. If not, check the next solution.

7. Disable the VPN

The VPN is a service to get all the media outside your geographic location. This is also used to install a country-specific app in another country. But sometimes it can create a problem with Play Store crashing.  So, this is recommended to try disabling the VPN.

Step 1 – Go to the settings of your device.

Step 2 – Under the “networks”, click on “More”.

Step 3 – Here you can find “VPN”.  Tap on it and turn it off.

Now, again go back and try to open the Google Play Store. This may solve your problem now. If not, check the next solution.

8. Force stop Google Play Service

Google Play Store needs to be restart just like your PC. This is a really helpful and common trick to overcome the Play Store crashing issue on your Xiaomi Redmi A2+. To do this, follow the below steps.

Step 1- Go to settings and then go to the “Application Manager”.

Step 2 – Now find “Google Play Store” and click on it.

Step 3 – Here click on “Force Stop”. This allows the Google Play Store to stop.

Now, try to open Google Play store again and this time the service is being restarted and might work properly. If not, try the next solution.

9. Try a Soft Reset of your device

This easy to use solution will remove all the unnecessary temporary files of your device, close all recent apps, and make it clean. This is just rebooting your device. It won’t delete any data from your device.

Step 1 – Long press the “Power” button on your device.

Step 2 – Now, click on ‘Reboot’ or ‘Restart’ option. Your device will restart in some time.

After restarting, try to open the Google Play Store again and this time you should succeed. If any case, it’s not opening, try the last (but not the least) method by hard reset your Android.

10. Hard reset your device

If you have done with all of the above solutions and still Play Store crashing, and you are aggressive to get it, then only try this method. Using this method will delete all the data of your device. So take a backup of the whole. Follow the step by step instruction below.

Step 1 – Go to setting and find “backup and reset” there.

Step 2 – Click on it. And then Click on the “Factory data reset” option.

Step 3 – Now confirm your action and tap on the “Reset device”.

This will take a while to reset your device completely. After completion, start the Google Play Store and set up as a new device.

The above methods are the best 11 among all the solutions you can get for your Play Store not working on wifi or Play Store crashing error. Try one by one and you might get rid of this problem.

Also read: