How To Revive Your Bricked Motorola Moto E13 in Minutes

Motorola Moto E13 has established a notable presence within the custom development arena. This trait holds for Motorola Moto E13. Today, it’s still one of the most popular budget smartphones available. The popular smartphone offers the freedom to flash custom ROMs, attain administrative privileges, access countless customization options, and much more.

Yet, delving into these capabilities comes with its share of risks. The potential for your Motorola Moto E13 to brick is high if you don’t know what you’re doing. This page teaches you how to unbrick your Motorola Moto E13 if it happens.

Part 1. Potential Causes of a Motorola Moto E13 Becoming Bricked

The factors that lead to your Motorola Moto E13 to brick vary. The possible solutions also depend upon the underlying causes. At times, the manufacturer’s intervention remains the only viable remedy. Below are the most frequent causes of bricking.

• The presence of malicious malware can harm your Motorola Moto E13. This can result in a ‘bricked’ state devoid of functionality.
• Altering the bootloader, system partition, or other critical software components risks triggering a bricking event.
• Bricking can also occur due to errors during the update process. Whether through automatic or manual downloads, any interruption during software updates can cause your Motorola Moto E13 to brick.
• Using inappropriate methods when performing root access can also result in bricking. Performing root access is dangerous as it grants entry to the Motorola Moto E13 device’s root directory housing the operating system.

Every Android device is susceptible to experiencing a system failure that leads to a bricked state. The risk remains consistent whether your device is from Motorola Moto E13, Motorola Moto E13, Motorola Moto E13, or any other brand. That’s why it’s strongly advised against modifying their smartphones, especially when you don’t know what you’re doing.

Part 2. Techniques To Unbrick a Motorola Moto E13

When faced with a bricked Motorola Moto E13, below are various techniques to revive it. Whether through software resets or hardware interventions, these methods can help breathe life back into your device.

Discharge the Battery

A particular suggestion involves allowing the Motorola Moto E13 device’s battery to discharge fully, enabling proper functionality of the Flash Tool software. This process typically spans a few days and is recommended by some specialists.

Perform a Factory Reset

Accessing the Motorola Moto E13 device settings is impossible if your Motorola Moto E13 bricks. For this reason, it is recommended to enter Recovery Mode. Here’s how.

• Step 1: Press and hold the Power button and select the Restart option. During the reboot, press the Volume Up and Power keys simultaneously.

• Step 2: The main menu will show three options: Reboot, Wipe Data, and Connect with MIAssistant. Choose Reboot.

Explore Dedicated Software Tools To Fix Bricked Phones

Motorola Moto E13 offers its official software tools, such as the Motorola Moto E13Flash Tool. It’s designed for advanced users familiar with flashing firmware onto their devices. Here’s how.

• Step 1: Download and install the Motorola Moto E13Flash Tool .

• Step 2: Download the Stock Firmware of Motorola Moto E13 and extract it on your computer. Press and Hold the Power and Volume Down buttons for at least 5-10 seconds to enter Fastboot Mode.

• Step 3: Connect your Motorola Moto E13 to the computer using a USB cable. Launch Motorola Moto E13Flash Tool and locate the Firmware you have downloaded on the computer. Click the refresh > flash to begin the flashing process.

• Step 4: The SUCCESS result should appear in the Motorola Moto E13Flash Tool once the flashing process is done.

However, if the Motorola Moto E13Flash Tool did not unbrick your Motorola Moto E13, consider using Wondershare Dr.Fone - System Repair (Android). The platform allows you to unbrick your Motorola Moto E13 with a few clicks.

Part 3. Reviving Your Motorola Moto E13 Using Wondershare Dr.Fone - System Repair (Android)

Dr.Fone - System Repair (Android) equips Motorola Moto E13 users with the ability to tackle soft brick and hard brick issues. This specialized Android repair tool enables you to restore your Motorola Moto E13 through a streamlined process, requiring just a few simple clicks.

safe & secure

3,227,773 people have downloaded it

Key Features

Dr.Fone - System Repair (Android) offers several benefits to unbrick your Motorola Moto E13 easily. Below are its key features.

• Fix Common Motorola Moto E13 Problems in Minutes. This tool provides comprehensive solutions for common issues like black screen, Play Store not working, boot loops, or even bricked Android devices .
• Compatibility with Over 1000 Android Models. This app fixes glitches across modern Android devices. The software is compatible with an extensive range of models. Whether your Motorola Moto E13 is unlocked or carrier-bound, restoration is not a problem.
• Unparalleled Software Flexibility. Dr.Fone - System Repair (Android) also boasts an added capacity to mend iOS devices. This versatile tool is your all-inclusive solution for mobile devices, ensuring convenience whether you own an iOS or Android device.

Advantage of Dr.Fone - System Repair (Android) for Unbricking Motorola Moto E13

Here are three benefits to choosing Dr.Fone - System Repair (Android) for unbricking a Motorola Moto E13. You’ll further believe Dr.Fone is a reliable assistant when reviving your bricked Motorola Moto E13.

Simplified Firmware Management

Dr.Fone eliminates the tedious search for appropriate firmware when unbricking your Motorola Moto E13. The platform automatically downloads the correct firmware for your device. The hassle of identifying and manually procuring firmware is removed, saving time and ensuring a smoother unbricking process.

User-Friendly Approach

One of Dr.Fone’s key strengths is its user-friendly design. It caters to users with varying levels of technical expertise by employing a step-by-step process. This approach guides users through the repair process with clarity. It reduces the requirement for advanced technical knowledge.

Free Version for Evaluation

Dr.Fone - System Repair (Android) offers a free version for everyone. It allows users to test its capabilities before committing to a purchase. This trial version grants users the opportunity to assess the tool’s effectiveness and suitability for unbricking their Motorola Moto E13. This instills confidence before investing in a full license.

How To Unbrick Motorola Moto E13 Using Dr.Fone - System Repair (Android)

Dr. Fone’s features are perfect for unbricking Motorola Moto E13 devices. Below are the procedures to restore your Motorola Moto E13 from its bricked state.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

• Step 1: Download and install Dr.Fone - System Repair (Android) on your computer. After launching the application, click System Repair. Then, click Android as the Motorola Moto E13 device type. Connect your Motorola Moto E13. Indicate Phone Brick as the Android issue and initiate the process by clicking Start.

• Step 2: Select the appropriate device information corresponding to your Motorola Moto E13. Choose Brand, Name, Model, Country, and Carrier. Confirm by checking the I agree button, then proceed to the next step by clicking Next.

• Step 3: Given that the Motorola Moto E13 lacks a Home button, click the Phone without Home button option. Follow the prompts displayed on-screen and proceed by clicking Next to initiate the process of restoring your bricked phone.

• Step 4: As your Motorola Moto E13 enters Download Mode, the firmware download will start automatically. Follow the on-screen instructions. Wait for the system to initiate the repair procedure automatically. Upon completion, a message will pop up on the main window. Click Done to exit the tool. You can click Try again to repeat the process if needed.

You May Also like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update
How to Fix It If Your Motorola Moto E13 Phone Got Bricked?

Conclusion

Don’t let a bricked Motorola Moto E13 stand in your way. Use the array of techniques from basic troubleshooting to advanced software tools to breathe life back into your device. Unbrick your Motorola Moto E13 to its full functionality using the methods provided or Dr.Fone’s adept assistance.

Lastly, you can still refer to Motorola Moto E13 for repairs. It remains the primary solution in numerous cases. Utilizing your warranty can alleviate the associated costs. Seeking assistance from a specialized technician is also a viable route to consider for a thorough device assessment.

8 Workable Fixes to the SIM not provisioned MM#2 Error on Motorola Moto E13

SIM cards are small chips that act as a connecting medium between your cell phone and your carrier. It is programmed to help your carrier identify your cell phone account with certain information. And eventually, you are enabled to make calls and to make use of mobile internet. Now, if your device is showing “SIM not provisioned” on Android then it signifies that the connection to carrier network cannot be established or perhaps, your carrier isn’t able to identify your cell phone account.

Part 1. Why does the error “SIM not provisioned MM#2” pop up?

There can be numerous reasons behind the pop up that reads “SIM not provisioned” on Android. But basically, it most probably affects the users who have registered a new SIM card. If you get to experience this issue in other situations or if the SIM is not working in Android, then the problem is with the SIM card and needs to be replaced. Anyways, here is a list of situations when the “SIM not provisioned” error may bother you.

• You got a new SIM card for your new phone.
• You are transferring your contacts into the new SIM card.
• In case, the carrier network provider’s authorization server is unavailable.
• Perhaps, you’re out of the reach of the carrier coverage area and that too, without active roaming agreement.
• Though new SIM cards work flawlessly. But it is often necessary to get your SIM card activated due to security reasons.

Just in case, you haven’t bought any new SIM card and the one you were using was working fine until now, then the most probable reasons behind it could be listed below:

• If your SIM card is too old, possibly it might have gone dead, try replacing it.
• Perhaps, the SIM card was not properly inserted into the slot or there might be some dirt between the SIM and smartphone pins.

A yet another reason could be that your SIM card got deactivated by your carrier provider as it could have been locked to a particular phone. Now, if you insert such a SIM card to another device or a new device even, you may get to witness a message that reads “SIM not valid”.

2.1 One click to fix the “SIM not provisioned MM#2” error on Android

Without talking any further, let’s straightly get to the first and the easiest way to repair SIM not provisioned issue on Android. For this purpose, we’re glad to introduce Dr.Fone - System Repair (Android) , one of its kind of tool that is capable of repairing almost all sort of Android OS issues in just a matter of few clicks. Whether it is SIM not provisioned on Android or SIM not working in Android or your device stuck in a boot loop or black/white screen of death. The most probable reason for these errors is Android OS corruption. And with Dr.Fone – Repair (Android) you can efficiently and effectively repair your Android OS in a hassle freeway.

Dr.Fone - System Repair (Android)

Android repair tool to fix “SIM not provisioned MM#2” error

• Fix any type of Android system issue with ease.
• Even novice users can use it without any hassle.
• Compatible with all major Motorola Moto E13 smartphone models.
• Highest success rate in the market for fixing Android issues.
• Supports all Android OS versions.

3981454 people have downloaded it

Step by step Tutorial to fix “SIM not provisioned MM#2” error

Step 1. Connect your Motorola Moto E13

Download and launch the Dr.Fone toolkit on your computer and then opt for the “System Repair” option from the main interface. Meanwhile, get your Motorola Moto E13 connected with the computer using a genuine cable.

Step 2. Opt for Android Repair and key in important information

Now, hit on the “Android Repair” from the 3 options on the left, followed by hitting the “Start” button. From the upcoming screen, you’ll be asked to key in important device-related information, like brand, model, country, and carrier details. Hit “Next” afterward.

Step 3. Boot your device in Download mode

You must put your device in Download mode for better repairing of your Android OS. Simply follow the onscreen guide to boot your Android in DFU mode and hit “Next” thereafter. Once done, the software will automatically start downloading the most compatible and recent firmware for your device.

Step 4. Initiate Repairing

As soon as the download completes, the software verifies the firmware and automatically initiates repairing your Motorola Moto E13. Within a short period, you’ll notice that your Motorola Moto E13 has been successfully repaired.

safe & secure

2.2 Ensure the SIM card is not dirty or wet

At times, the issue can be as simple as cleaning your SIM card and SIM slot properly. Ensuring that SIM is not wet either and then putting it back into its place. If this works, then the SIM not working in Android was due to the dirt or moisture that was preventing proper contact between SIM card pins and smartphone circuit.

2.3 Insert the SIM card correctly

If your SIM card was working properly until yet, there is a good possibility that the SIM card may have moved a bit from its actual location. Eventually, there is poor contact between the SIM card pins and the circuit. Try inserting your SIM card properly with the following steps.

• Power off your Motorola Moto E13 and with the help of Q pin, eject the SIM card holder from the SIM slot of your device.
• Now, grab a soft rubber pencil eraser and gently rub it in on the gold pins of SIM card to clean them properly. Then, with the help of a soft cloth wipe away the rubber residue from the SIM card.
• Next, push the SIM back into the SIM card holder properly and push it back into the SIM slot now.
• Turn your device back on and look if your SIM not provisioned on the Android issue is resolved or not.

2.4 Activate the SIM card

Usually, when you buy a new SIM card, it gets automatically activated within 24 hours of being plugged into a new device. But if that’s not happening in your case and you’re wondering how to activate SIM card, make use of the three options below to enable activation:

• Call your carrier service provider
• Send an SMS
• Log on to your carrier’s website and look for the activation page over it.

Note: The aforementioned options are straightforward and are quick ways to enable activation. It depends on your carrier network whether they support them.

2.5 Contact your carrier

Even if your SIM isn’t activated, grab another working device to make a phone call to your carrier or network. Ensure, to explain the entire situation and the error message to them. Be patient while they investigate the issue. It may eat up a heck load of time or may get resolved in a few minutes that completely depend upon the complexity of the issue.

2.6 Try the other SIM card slot

A yet another reason why SIM not working in Android can be because of the SIM card slot might have gone corrupted. Thanks to the dual SIM technology, you do not have to rush immediately to get it to check or repair. You can simply rule out this possibility by ejecting the SIM card from its original SIM slot and then replacing it into the other SIM card slot. If this solution did work out for you then it is obvious that the problem was with the SIM card slot that got corrupted. And hence, it was triggering SIM not responding issue.

2.7 Try the SIM card in other phones

Or just in case, you’ve still no joy and the SIM not provisioned on Android message is bothering you. Try making use of another Android device. Eject the SIM card from the Motorola Moto E13 device which is creating problems and try plugging it into other Motorola Moto E13] and other smartphones. Perhaps, this will let you know whether the issue is with your device only or with the SIM card itself.

2.8 Try a new SIM card

Still, wondering how to fix SIM not provisioned? Perhaps, nothing worked for you, right? Well, on that note, you must head to your carrier store and request a new SIM card. Also, inform them about the “SIM not provisioned MM2” error, they will be able to execute proper diagnostics over your old SIM card and hopefully get it resolved. Or else, they’ll equip you with a brand new SIM card and swap the new SIM card into your device and get it activated in the meantime. Eventually, restoring the normal functioning of your device.

Conclusion

In wrapping up, SIM not provisioned errors on Android can be troubling, but they’re certainly fixable. There are several methods, from a simple device restart to reaching out to your network provider. But if these don’t work, we suggest trying Dr.Fone - System Repair (Android) . This tool is known for its ability to handle an array of Android issues and could be just what your device needs. Navigate your tech challenges with ease using Dr.Fone.

safe & secure

7 Solutions to Fix Error Code 963 on Google Play Of Motorola Moto E13

People are increasingly complaining about Google Play Error Codes which pop-up during downloading, installing or updating an App via Google Play Store. Amongst these, the most recent and common one being Error Code 963.

Google Play Error 963 is a typical error which shows up not only when you try to download and install an App but also during App update.

Error 963 cannot be attributed to a particular App or its update. It is a Google Play Store error and is experienced by Android users across the world.

Error Code 963, just like any other Google Play Store errors, is not something difficult to deal with. It’s a minor glitch which can be fixed easily. There is no need to worry or panic if you see Error 963 on Google Play Store preventing your favorite App from downloading or updating.

Read on to find out more about the Google Play Error 963 and best ways to fix it.

Part 1: What is Error Code 963?

Error 963 is a common Google Play Store error which basically hinders Apps from downloading and updating. Many people get worried when Error Code 963 does not let them install new Apps or update existing ones. However, please understand that Google Play Error is not such a big deal as it may sound and can be overcome easily.

Error 963 pop-up message reads as follows: “cannot be downloaded due to an error (963)” as shown in the image below.

A similar message shows up even while you are trying to update an App, as shown in the screenshot below.

Error Code 963 is basically an outcome of data crash which mostly is seen in cheaper smartphones. There might another reason for Error 963 preventing Apps from downloading and updating, which is Google Play Store Cache being corrupted. People also speculate SD Card related issues as many-a-times external memory enhancer chips do not support large Apps and their updates. Also, Error 963 is very common with HTC M8 and HTC M9 smartphones.

All these reasons and more can handle with ease and you can continue to use Google play services smoothly. In the following segment, we will discuss various fixes to cure the problem to enable to you download, install and update Apps on your device normally.

Part 2: Easiest solution to fix Error Code 963 on Android

When it comes to the most convenient solution to fix error 963, Dr.Fone - System Repair (Android) cannot be missed. It is the most productive program that covers a wide range of Android issues. It ensures full safety while performing and one can fix the Android issues in a hassle-free way.

Dr.Fone - System Repair (Android)

One click to fix Google Play error 963

• The tool is recommended for its higher success rate.
• Not just Google Play error 963, it can fix a large number of system issues including app crashing, black/white screen etc.
• It’s considered as the first tool that offers one-click operation for Android repairing.
• There’s no technical expertise needed to use this tool.

4,997,014 people have downloaded it

This section will provide you the tutorial guide for how to fix error code 963.

Note: Before moving to solve the error 963, we would like to inform you that the process may result in wiping away your data. And therefore, we suggest you to make backup of your Motorola Moto E13 prior to fixing this Google Play error 963.

Phase 1: Connecting and preparing the Motorola Moto E13 device

Step 1 – To begin fixing error 963, run Dr.Fone after downloading and installing it on your PC. Now, pick out the ‘System Repair’ tab from the main screen. Thereupon, with the help of a USB cable, make connection between your Motorola Moto E13 and PC

Step 2 – On the left panel, you’re supposed to choose ‘Android Repair’ and then click the ‘Start’ button.

Step 3 – On the following screen, you need to choose the appropriate details for your device like the name, brand, model, country/region etc. Later, go for warning confirmation and hit ‘Next’.

Phase 2: Taking Android device in Download mode for repairing

Step 1 – It is essential to get your Motorola Moto E13 or tablet entered in Download mode. For this, following are the steps to be taken:

If the Motorola Moto E13 device contains Home button:

• Turn the Motorola Moto E13 device off and then keep holding the ‘Power’, ‘Volume Down’ and ‘Home’ buttons altogether for about 10 seconds. Next, release them all and push the ‘Volume Up’ key. This way, your device will enter the Download mode.

If the Motorola Moto E13 device contains no Home button:

• Switch off your phone/tablet and press the ‘Volume Down’, ‘Bixby’ and ‘Power’ buttons for 10 seconds. Leave the buttons and then press the ‘Volume Up’ button for entering download mode.

Step 2 – Press the ‘Next’ button and then the program will commence the firmware downloading.

Step 3 – Upon successful downloading and verification of the firmware, the process of Android device repairing will begin automatically.

Step 4 – Within a while, the Google play error 963 will be vanished.

Part 3: 6 Common Solutions to fix Error Code 963

Since there is no specific reason for Error Code 963 to occur, similarly there is no one solution to the problem. You may use any one of them below or try them all to never see Error Code 963 on your device.

1. Clear Play Store Cache and Play Store Data

Clearing Google Play Store Cache and Data basically means keeping Google Play Store clean and free from trouble-making data stored in respect of it. It is advisable to carry out this process regularly to prevent Errors like Error Code 963 from occurring.

Follow the steps given below to fix  Error Code 963:

Visit “Settings” and select “Application Manager”.

Now select “All” to see all downloaded and built-in Apps on your device.

Select “Google Play Store” and from the options that appear, tap on “Clear Cache” and “Clear Data”.

Once you are done clearing Google Play Store Cache and Data, try to download, install or update the App facing Google Play Error 963 again.

2. Uninstall updates for Play Store

Uninstalling Google Play Store updates is an easy and quick task. This method is known to have helped many as it brings back the Play Store to its original state, free from all updates.

Visit “Settings” and select “Application Manager”.

Now select “Google Play Store” from “All” Apps.

In this step, click on “Uninstall Updates” as shown below.

Click here

3. Shift the App from SD Card to device’s memory

This method is strictly for certain Apps which cannot be updated because they are stored on an external memory card, i.e., SD Card. Such memory enhancing chips do not support large Apps and due to a shortage of space prevents them from updating. It advisable to move such Apps from the SD Card to the Motorola Moto E13 device’s internal memory and then try to update it.

Visit “Settings” and select “Apps”.

From “All” Apps click on the App which is unable to update.

Now click on “Move to Phone” or “Move to internal storage” and try to download its update again from the Google Play Store.

Try updating the App now. If the Apps’s update does not download even now, DO NOT worry. There are three more ways to help you.

4. Unmount your external Memory Card

Error Code963 may also occur due to an external memory chip used in your device to enhance its storage capacity. This is very common and can be dealt with by unmounting the SD Card temporarily.

To unmount your SD Card:

Visit “Settings” and keep scrolling downwards.

Now select “Storage”.

From the options that appear, select “Unmount SD Card” as explained in the screenshot below.

Note: If the App or its update downloads successfully now, do not forget to mount the SD Card back.

5. Remove and Re-add your Google account

Deleting and re-adding your Google account in might sound a little tedious but it does not take much of your precious time. Moreover, this technique is very effective when it comes to fixing Error  Code 963.

Carefully follow the steps given below to remove and then re-add your Google account:

Visit “Settings”, under “Accounts” select “Google”.

Select your account and from the “Menu” select “Remove account” as shown below.

Once your account is removed, follow the steps given hereunder to add it back again after a few minutes:

Go back to “Accounts” and select “Add Account”.

Select “Google” as shown above.

In this step feed in your account details and your Google account will be configured once again.

6. Special technique for HTC users

This technique is specially crafted fro HTC smartphone users who frequently face Google Play Error 963.

Follow the step-by-step instructions given below to uninstall all updates for your HTC One M8 Lock Screen App:

Visit “Settings” and find “HTC Lock Screen” under “Apps”.

Now click on “Force Stop”.

In this step, Click on “Uninstall Updates”.

This remedy is as simple as it sounds and has helped many HTC users to get rid of Error 963.

Google Play Errors are a very common phenomenon these days, especially Error Code 963 which usually occurs in the Google Play Store when we try to download, install or update an App. There is no need to worry if you see Error Code 963 pop-up on your screen as your device and its software are not to be blamed for Error 963 to suddenly surface. It is a random error and can be fixed easily by you. You do not need any technical assistance to deal with the issue. All you need to do is follow the steps introduced in this article to use Google Play Store and its services smoothly.

Also read: