How To Revive Your Bricked Tecno Spark 20 in Minutes

Tecno Spark 20 has established a notable presence within the custom development arena. This trait holds for Tecno Spark 20. Today, it’s still one of the most popular budget smartphones available. The popular smartphone offers the freedom to flash custom ROMs, attain administrative privileges, access countless customization options, and much more.

Yet, delving into these capabilities comes with its share of risks. The potential for your Tecno Spark 20 to brick is high if you don’t know what you’re doing. This page teaches you how to unbrick your Tecno Spark 20 if it happens.

Part 1. Potential Causes of a Tecno Spark 20 Becoming Bricked

The factors that lead to your Tecno Spark 20 to brick vary. The possible solutions also depend upon the underlying causes. At times, the manufacturer’s intervention remains the only viable remedy. Below are the most frequent causes of bricking.

The presence of malicious malware can harm your Tecno Spark 20. This can result in a ‘bricked’ state devoid of functionality.
Altering the bootloader, system partition, or other critical software components risks triggering a bricking event.
Bricking can also occur due to errors during the update process. Whether through automatic or manual downloads, any interruption during software updates can cause your Tecno Spark 20 to brick.
Using inappropriate methods when performing root access can also result in bricking. Performing root access is dangerous as it grants entry to the Tecno Spark 20 device’s root directory housing the operating system.

Every Android device is susceptible to experiencing a system failure that leads to a bricked state. The risk remains consistent whether your device is from Tecno Spark 20, Tecno Spark 20, Tecno Spark 20, or any other brand. That’s why it’s strongly advised against modifying their smartphones, especially when you don’t know what you’re doing.

Part 2. Techniques To Unbrick a Tecno Spark 20

When faced with a bricked Tecno Spark 20, below are various techniques to revive it. Whether through software resets or hardware interventions, these methods can help breathe life back into your device.

Click here

Discharge the Battery

A particular suggestion involves allowing the Tecno Spark 20 device’s battery to discharge fully, enabling proper functionality of the Flash Tool software. This process typically spans a few days and is recommended by some specialists.

Perform a Factory Reset

Accessing the Tecno Spark 20 device settings is impossible if your Tecno Spark 20 bricks. For this reason, it is recommended to enter Recovery Mode. Here’s how.

Step 1: Press and hold the Power button and select the Restart option. During the reboot, press the Volume Up and Power keys simultaneously.

Step 2: The main menu will show three options: Reboot, Wipe Data, and Connect with MIAssistant. Choose Reboot.

Explore Dedicated Software Tools To Fix Bricked Phones

Tecno Spark 20 offers its official software tools, such as the Tecno Spark 20Flash Tool. It’s designed for advanced users familiar with flashing firmware onto their devices. Here’s how.

Step 1: Download and install the Tecno Spark 20Flash Tool .

Step 2: Download the Stock Firmware of Tecno Spark 20 and extract it on your computer. Press and Hold the Power and Volume Down buttons for at least 5-10 seconds to enter Fastboot Mode.

Step 3: Connect your Tecno Spark 20 to the computer using a USB cable. Launch Tecno Spark 20Flash Tool and locate the Firmware you have downloaded on the computer. Click the refresh > flash to begin the flashing process.

Step 4: The SUCCESS result should appear in the Tecno Spark 20Flash Tool once the flashing process is done.

However, if the Tecno Spark 20Flash Tool did not unbrick your Tecno Spark 20, consider using Wondershare Dr.Fone - System Repair (Android). The platform allows you to unbrick your Tecno Spark 20 with a few clicks.

Part 3. Reviving Your Tecno Spark 20 Using Wondershare Dr.Fone - System Repair (Android)

Dr.Fone - System Repair (Android) equips Tecno Spark 20 users with the ability to tackle soft brick and hard brick issues. This specialized Android repair tool enables you to restore your Tecno Spark 20 through a streamlined process, requiring just a few simple clicks.

safe & secure

3,227,773 people have downloaded it

Key Features

Dr.Fone - System Repair (Android) offers several benefits to unbrick your Tecno Spark 20 easily. Below are its key features.

Fix Common Tecno Spark 20 Problems in Minutes. This tool provides comprehensive solutions for common issues like black screen, Play Store not working, boot loops, or even bricked Android devices .
Compatibility with Over 1000 Android Models. This app fixes glitches across modern Android devices. The software is compatible with an extensive range of models. Whether your Tecno Spark 20 is unlocked or carrier-bound, restoration is not a problem.
Unparalleled Software Flexibility. Dr.Fone - System Repair (Android) also boasts an added capacity to mend iOS devices. This versatile tool is your all-inclusive solution for mobile devices, ensuring convenience whether you own an iOS or Android device.

Advantage of Dr.Fone - System Repair (Android) for Unbricking Tecno Spark 20

Here are three benefits to choosing Dr.Fone - System Repair (Android) for unbricking a Tecno Spark 20. You’ll further believe Dr.Fone is a reliable assistant when reviving your bricked Tecno Spark 20.

Simplified Firmware Management

Dr.Fone eliminates the tedious search for appropriate firmware when unbricking your Tecno Spark 20. The platform automatically downloads the correct firmware for your device. The hassle of identifying and manually procuring firmware is removed, saving time and ensuring a smoother unbricking process.

User-Friendly Approach

One of Dr.Fone’s key strengths is its user-friendly design. It caters to users with varying levels of technical expertise by employing a step-by-step process. This approach guides users through the repair process with clarity. It reduces the requirement for advanced technical knowledge.

Free Version for Evaluation

Dr.Fone - System Repair (Android) offers a free version for everyone. It allows users to test its capabilities before committing to a purchase. This trial version grants users the opportunity to assess the tool’s effectiveness and suitability for unbricking their Tecno Spark 20. This instills confidence before investing in a full license.

How To Unbrick Tecno Spark 20 Using Dr.Fone - System Repair (Android)

Dr. Fone’s features are perfect for unbricking Tecno Spark 20 devices. Below are the procedures to restore your Tecno Spark 20 from its bricked state.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

Fix your Android to normal, no skills required.
Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
The high success rate in resolving Android system issues.
Compatible with a wide range of Android devices and OS versions
User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

Step 1: Download and install Dr.Fone - System Repair (Android) on your computer. After launching the application, click System Repair. Then, click Android as the Tecno Spark 20 device type. Connect your Tecno Spark 20. Indicate Phone Brick as the Android issue and initiate the process by clicking Start.

Step 2: Select the appropriate device information corresponding to your Tecno Spark 20. Choose Brand, Name, Model, Country, and Carrier. Confirm by checking the I agree button, then proceed to the next step by clicking Next.

Step 3: Given that the Tecno Spark 20 lacks a Home button, click the Phone without Home button option. Follow the prompts displayed on-screen and proceed by clicking Next to initiate the process of restoring your bricked phone.

Step 4: As your Tecno Spark 20 enters Download Mode, the firmware download will start automatically. Follow the on-screen instructions. Wait for the system to initiate the repair procedure automatically. Upon completion, a message will pop up on the main window. Click Done to exit the tool. You can click Try again to repeat the process if needed.

You May Also like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update
How to Fix It If Your Tecno Spark 20 Phone Got Bricked?

Conclusion

Don’t let a bricked Tecno Spark 20 stand in your way. Use the array of techniques from basic troubleshooting to advanced software tools to breathe life back into your device. Unbrick your Tecno Spark 20 to its full functionality using the methods provided or Dr.Fone’s adept assistance.

Lastly, you can still refer to Tecno Spark 20 for repairs. It remains the primary solution in numerous cases. Utilizing your warranty can alleviate the associated costs. Seeking assistance from a specialized technician is also a viable route to consider for a thorough device assessment.

Guide: How To Unbrick a Bricked Tecno Spark 20 Phone

Tecno Spark 20 phones are super popular thanks to their excellent features and affordable prices. But being so popular means people try to customize them with custom software. If you’re not careful, you might have a “bricked” Tecno Spark 20 phone. It won’t work at all. It will be more like a brick than a smartphone.

Don’t worry, though. This guide is here to help. It will show you how to unbrick your phone step by step. You’ll learn to bring your phone back to life and make it work again. So, get started on fixing your bricked Tecno Spark 20 phone by reading this article.

Part 1. Common Reasons Why Tecno Spark 20 Phones Get Bricked

A bricked phone might sound like a techy term, but it’s pretty simple – when your Tecno Spark 20 phone turns into a lifeless block that won’t do anything. In this section, you’ll learn all about why this happens, so you can avoid these issues and keep your phone alive as long as possible.

Trying to flash incompatible ROMs. Sometimes, people want their Tecno Spark 20 phones to run different software like a custom version of Android called a ROM. But if you use the correct ROM for your specific phone, it can mess things up nicely. Also, inexperience with ROM flashing can hard brickyour Tecno Spark 20 Be sure to follow guides and ask for community help online.
Rooting mishaps/failures.“Rooting” means giving your phone superpowers, but if you mess up, it can go wrong. Your phone might not boot up, leaving you with a brick. Like the previous bullet, follow guides carefully, especially if inexperienced.
Failed Firmware Updates. When your phone asks you to update its software, following the instructions carefully is essential. If you interrupt the process or something goes wrong, your phone could be bricked.

Now, you must know about soft and hard-bricking to learn how to diagnose your phone. Soft bricking is like a phone’s bad day – it might not start up. However, with the right help, you can fix it. Hard bricking is worse. It’s when your phone is a paperweight – it won’t turn on, respond, or do anything useful.

Part 2. Method 1: Use the Tecno Spark 20 Flash Tool To Recover Bricked Tecno Spark 20 Phones

Say you’ve accidentally bricked your Tecno Spark 20 phone due to rooting or ROM flashing. You might feel scared, but imagine having a magic wand that can fix your bricked phone. That’s what the Tecno Spark 20 Flash Tool is –a dedicated Tecno Spark 20 unbricking tool. It lets you install or flash different software onto your phone, giving it a fresh start. Most of the time, a simple firmware flash will unbrick your Tecno Spark 20.

The Tecno Spark 20 Flash Tool is a superhero for various situations. Here are some scenarios where it can save the day:

**Device Recovery.**If your phone is bricked or acting strange, the Flash Tool can help bring it back to life.
Firmware Updates. You can use it to install official updates released by Tecno Spark 20, ensuring your phone runs smoothly.
**Device Customization.**Want a different look for your phone? The Flash Tool can help you install custom ROMs or themes.
**Bug Fixes.**Got pesky bugs or glitches? The Flash Tool can replace corrupted software to make your phone behave.
Performance Enhancement. If your phone feels sluggish, the Flash Tool can boost its speed by flashing a new OS.

How To Use the Tecno Spark 20 Flash Tool To Unbrick a Tecno Spark 20 Phone

Now that you know what the Tecno Spark 20 Flash Tool is all about, it’s time to learn how to use it. If you’ve bricked your Tecno Spark 20 phone, follow the steps below:

Step 1. Download the Tecno Spark 20 Flash Tool and the stock firmware of your device on your computer.
Step 2. Turn off your phone. Then, press and hold the Volume Down + Power Key simultaneously for 6-8 seconds. This will force your phone to enter the Fastboot mode.

Step 3. Connect your phone to your computer using a cable when you see this screen flash.

Step 4. Using the Tecno Spark 20 Flash Tool, click Select. Then, locate the firmware files you downloaded earlier.

Step 5. Click the refresh button until the flash tool recognizes your device. Then, click flash to replace the firmware. A text saying “success” should appear under the result column.

Congratulations! Your phone should be up and working after following these steps.

Part 3. Method 2: Wondershare Dr.Fone System Repair – Your One-Stop Shop for Unbricking Your Tecno Spark 20 Phone

If you gave the Tecno Spark 20 Flash Tool a shot and your phone is still not cooperating, don’t lose hope. Sometimes, the magic touch needs a slight variation. That’s where Dr.Fone comes into play. This dedicated software can work wonders when fixing various phone problems. It can even help in cases of bricked Tecno Spark 20 phones involving software or firmware issues.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

Fix your Android to normal, no skills required.
Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
The high success rate in resolving Android system issues.
Compatible with a wide range of Android devices and OS versions
User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

One of Dr.Fone’s most astonishing powers is its “System Repair” feature. This is where the real magic happens. If your Tecno Spark 20 phone is bricked, it can help repair the underlying software glitches that caused the issue. Moreover, Dr.Fone brings a toolbox of features to the table, making it more than just a one-trick pony. Here are its key features:

**Data Recovery:**If you’ve lost precious data, Dr.Fone can help recover it, even from a bricked phone.
**Data Transfer:**You can quickly move data between devices, even if one is unresponsive.
**System Backup & Restore:**Fone can help you create a backup of your phone’s system and restore it when needed.
**Unlocking Tools:**If you’re locked out of your phone, Dr.Fone can help you regain access.

How To Use Dr.Fone System Recovery Feature To Unbrick a Tecno Spark 20 Phone

Now that you know about Dr.Fone, it’s time to understand how to use it. Hopefully, it can save your bricked Tecno Spark 20 phone from its problems. Follow the steps below:

Step 1. DownloadDr.Fone from its official website , and launch it on your computer. After entering the Toolbox menu from the left panel, click System Repair. Make sure that your Tecno Spark 20 phone is connected.
Step 2. Select Android on the next screen.

Step 3. Initiate the Android System Repair by clicking Start.

Step 4. Confirm your device details. You can edit any details that might be wrong.

Step 5. Put your phone into Download mode. Follow the guidelines for phones with or without home buttons. Your phone will begin downloading the dedicated firmware.

Step 6. After downloading the firmware, verify and proceed with the installation by clicking Fix Now. Confirm firmware installation by typing “000000” into the text box in the appearing window. Click Confirm afterward.

Step 7. After the process is finished, your phone should now be okay. Click Done.

Part 4. Best Practices/Tips Before Unbricking Your Phone

Before diving into the unbricking process, you must arm yourself with some tips and precautions to ensure your recovery journey is as smooth as possible. Here’s what you need to know:

Backing Up Data: An Ounce of Prevention. Remember the golden rule: always back up your data before attempting any phone recovery. Unbricking might save your phone, but being safe is better than sorry.
**Authentic Tools and Software: Stay on the Safe Side.**Using genuine and trustworthy tools is crucial when unbricking your Tecno Spark 20 This applies especially to Dr.Fone, which you should only download from the official website. Additionally, when recovering your phone’s software, use authentic Tecno Spark 20 ROMs (the operating system’s files).
**Learning from Online Guides and Communities: Seek Guidance.**Navigating the unbricking process might seem daunting, but you’re not alone. There are many online guides, tutorials, and communities where people share their experiences and solutions.

Conclusion

So, there you have it – your guide to fixing a bricked Tecno Spark 20 phone. Remember, bricking happens when your phone stops working. You won’t be afraid when that happens, as you learned about the Tecno Spark 20 Flash Tool and Dr.Fone. They are your phone-saving superheroes that can unbrick even a hard-bricked Tecno Spark 20 phone.

As a parting reminder, always keep a tool ready for emergencies. For this, choose Dr.Fone. It’s a super tool for all your phone problems. Give it a shot and be confident with your phone wherever you go and whatever you do with it.

safe & secure

3,052,835 people have downloaded it

What to Do if Google Play Services Keeps Stopping on Tecno Spark 20

Is the annoying Google Play Services error constantly popping up on your phone? Is it happening while reading, gaming, or browsing social media?

The error constantly plagues thousands of Android users, and it can be incredibly frustrating when you’re using the phone for something important or doing something entirely unrelated to the Google Play app.

Oddly enough, the “Unfortunately, Google Play Services has stopped.” error isn’t severe – you can fix it with a few general and easy-to-do fixes, a factory reset, or a system repair. Below, you’ll find info about why it’s happening and a list of ten possible solutions.

Why Am I Getting the Message “Google Play Services Keeps Stopping?”

Computers and phones often speak in error codes and apps that stop working. Even minor connectivity issues can cause these problems, leaving you wondering what’s wrong with your device or displaying the “Unfortunately, Google Play Services has stopped working.” error message.

Software errors are another set of problems that can also cause this issue. Namely, an average phone user has at least 40 installed apps, and sometimes these apps don’t play well together. They generate problems or steal resources from each other, such as RAM, causing crashes and errors.

There’s also the issue of wrong app versions. Although each Android phone uses the Android operating system, these systems can be vastly different, and the apps built for them can be made to be phone-specific and only run on a specific phone model.

That’s also the case with Google Play Store and Google Play Services.

Why Google Play Services Keeps Stopping

The Google Play Services keeps stopping error is an infamous one, and it can appear for various reasons and even on brand new phones. However, these causes can be categorized into three groups, which are:

Network Issues
Software Errors
Wrong Play Services Version

Regardless of what’s causing the issue on your phone, we’ve compiled a list of ten possible solutions, and you can find those below.

Solutions to Try When Google Play Services Keeps Stopping

There are many solutions for the issue of Google Play Services that keeps stopping. We’ve listed the most famous and effective ones, and you’ll find them below in no particular order. Try them out and see whether they fix the issue.

1. Do a Factory Reset

A factory reset on any smartphone removes all your data on the phone’s internal storage and can even wipe your SD card clean if you select the option. Before you reset your phone to factory settings, ensure you’ve backed up all your essential apps and files. When you’re ready, you can do a factory reset by following these steps:

Step 1: Go into Settingsand search for “reset.”
Step 2: Choose Factory reset.
Step 3: Tap the Erase all dataor Reset device at the bottom, whichever button is there.
Step 4: Input your password and confirm the action.

Your phone will now restart and start the reset process. Once the factory reset completes, your phone will look brand new, and you’ll need to install all your apps again. Moreover, your Google Play Services app will likely get fixed by this, too.

2. Update Your System

As keeping your phone’s system and apps updated to the latest possible version is essential and recommended for the best performance and highest efficiency, you can try updating it to see whether it fixes your Google Play Services error. Here’s how:

Step 1: Open the Settings
Step 2: Head into System> System update.
Step 3: If there’s an update available, click it and go through the process of updating your phone’s system.

Restarting your phone after an update, even if it doesn’t restart itself, is highly advisable, ensuring that the new updates apply without issues.

3. Revert to the Previous Version

As we’ve discussed the wrong Play Services versions above, it’s worth noting that sometimes even the developers can make mistakes and roll out the wrong version for your phone. So, if you notice that the phone is getting the error after you’ve updated Google Services or the Play Store, you can quickly revert to the previous version, and here’s how:

Step 1: Head into Settings> Apps > Google Play Services.
Step 2: Press the Disablebutton at the bottom of the screen.
Step 3: Restart the phone, repeat the process by clicking Enablethis time, and restart the phone again.

As these are system apps, you can’t remove them from the phone, and disabling them will only remove the updates, leaving you with a base version that came with your phone out of the box.

4. Uninstall the App’s Updates and Reinstall

Like reverting to the previous version, you can also try reinstalling updates to fix the Google Play Services has stopped working error. The process is similar to the one above, but we’ve still included the steps. Here’s how you can do that:

Step 1: Go into Settings> Apps and find Google Play Services.
Step 2: Tap it and press Uninstall Updatesat the bottom.
Step 3: Exit the Settingsapp and restart the phone.
Step 4: Open the Play Storeapp and head into the app’s settings by clicking your profile icon. Then scroll to the bottom, and tap Settings.
Step 5: Find and tap the Play Store versionto update your Google Play Services.

As you’re already there, you might as well update all other apps after you tap Manage apps & device. That will ensure that older and not-up-to-date apps aren’t causing the issue.

5. Check Storage

Believe it or not, one of the leading causes of the Google Play Services issue is a phone overfilled with apps. Namely, if you have insufficient storage, the Google Play Store app will likely crash and display errors such as “Unfortunately, Google Play Services has stopped working.”

Head into your phone’s Settings and select Storage to see how your phone’s doing storage-wise. Deleting a few apps you don’t use and transferring your photo and video library to a PC is highly advisable if your phone’s storage space lacks gigabytes.

6. Do a System Repair

Although the other solutions here are general fixes that might help, a system repair might take a bit longer but will undoubtedly fix your issue. You can use the Wondershare Dr.Fone app to repair the system and eliminate the annoying “Unfortunately, Google Play Services has stopped working” error.

Moreover, Dr. Fone works on Android and iOS devices and can fix various phone issues, including boot loops, a white screen of death, a stuck phone, etc. That’s why we’ve included a guide on using it for an Android phone issue. Here’s how:

Step 1: Launch the Wondershare Dr.Fone app on your PC and head into Toolkit> System Repair > Android.
Step 2: Select the type of issue you want to fix > Start.
Step 3: Select the make and model of your phone so that Dr.Fone can find the appropriate Android software.
Step 4: Connect the phone to the PC via a USB cable and follow the on-screen instructions to put the phone into Download Mode. The instructions are available for both phones with and without the home button.
Step 5: Select the appropriate Android firmware, download it, and hit Fix Nowafter it downloads.
Step 6: Enter the code and hit Confirmto continue the system repair process. When it’s done, click the Done

That’s all it takes to do a system repair with Wondershare Dr.Fone. Give the software a few minutes to complete, during which your phone might restart a few times. Once it’s done, your Google Play Services app will undoubtedly work.

7. Clear Cache

The easiest and the most obvious fix for many Android apps is clearing the app’s cache. Here’s how you can do that for Google Play Services and Google Play Store:

Step 1: Go into Settings> Apps and find the Google Play Store
Step 2: Tap Storageand hit the Clear cache
Step 3: Repeat the process for the Google Play Services

If this doesn’t work, move on to another possible fix.

8. Check Date and Time Settings

Oddly enough, the Google Play Services app is prone to failure because of an incorrectly set time or date. That’s because Google’s servers constantly check these settings before issuing updates to the Tecno Spark 20 devices, so you’ll need to ensure they’re correct beforehand. Here’s how:

Step 1: Head into Settings> System > Date & Time.
Step 2: Ensure that both “**Use network–provided time” and “Use network-provided time zone**” are toggled on.
Step 3: If this doesn’t work, you can try repeating the process and manually setting the time and the time zone.

Once you check or change these settings, try using the Google Play Store app and check whether the issue is fixed. Restarting the phone after changing the settings is also highly advisable.

9. Troubleshoot Your Internet Connection

Another regularly overlooked troublemaker is a poor internet connection. That’s because most apps nowadays are meant to work in online mode only, and losing connection or using a bad one interferes with the app’s functionality.

To test the internet connection on your Tecno Spark 20, you should open a browser and head to a random internet page to see if it’s opening and whether there are any delays. If it’s working fine, your internet connection isn’t the problem.

10. Adjust Google Play Services Permissions

Although permissions rarely change, they can cause issues if you change them accidentally. These settings can be found in the same place where you would uninstall updates or clear the app’s cache, so you can use some of the steps mentioned above to check them.

Once inside Permission Settings, check whether the Google Play Services and Play Store apps have sufficient permission to do their jobs and whether any required permissions were recently removed. If so, grant these two apps their permissions back.

safe & secure

4,953,228 people have downloaded it

Conclusion

Although it’s an incredibly frustrating error, the “Unfortunately, Google Play Services has stopped” message is more annoying than serious. We’ve explained why it happens, but we’ve also given you a list of solutions to fix it.

Our list includes various fixes, from simple ones, like deleting the app’s cache and ensuring your network works fine, to more serious ones, like doing a factory reset. Alternatively, you can do a system repair with the help of Wondershare Dr.Fone, which will certainly fix the problem, but it might be a bit more complicated than cache deletion.

HowTo

How To Revive Your Bricked Tecno Spark 20 in Minutes | Dr.fone