How To Revive Your Bricked Vivo Y78+ in Minutes

Vivo Y78+ has established a notable presence within the custom development arena. This trait holds for Vivo Y78+. Today, it’s still one of the most popular budget smartphones available. The popular smartphone offers the freedom to flash custom ROMs, attain administrative privileges, access countless customization options, and much more.

Yet, delving into these capabilities comes with its share of risks. The potential for your Vivo Y78+ to brick is high if you don’t know what you’re doing. This page teaches you how to unbrick your Vivo Y78+ if it happens.

Part 1. Potential Causes of a Vivo Y78+ Becoming Bricked

The factors that lead to your Vivo Y78+ to brick vary. The possible solutions also depend upon the underlying causes. At times, the manufacturer’s intervention remains the only viable remedy. Below are the most frequent causes of bricking.

• The presence of malicious malware can harm your Vivo Y78+. This can result in a ‘bricked’ state devoid of functionality.
• Altering the bootloader, system partition, or other critical software components risks triggering a bricking event.
• Bricking can also occur due to errors during the update process. Whether through automatic or manual downloads, any interruption during software updates can cause your Vivo Y78+ to brick.
• Using inappropriate methods when performing root access can also result in bricking. Performing root access is dangerous as it grants entry to the Vivo Y78+ device’s root directory housing the operating system.

Every Android device is susceptible to experiencing a system failure that leads to a bricked state. The risk remains consistent whether your device is from Vivo Y78+, Vivo Y78+, Vivo Y78+, or any other brand. That’s why it’s strongly advised against modifying their smartphones, especially when you don’t know what you’re doing.

Part 2. Techniques To Unbrick a Vivo Y78+

When faced with a bricked Vivo Y78+, below are various techniques to revive it. Whether through software resets or hardware interventions, these methods can help breathe life back into your device.

Discharge the Battery

A particular suggestion involves allowing the Vivo Y78+ device’s battery to discharge fully, enabling proper functionality of the Flash Tool software. This process typically spans a few days and is recommended by some specialists.

Perform a Factory Reset

Accessing the Vivo Y78+ device settings is impossible if your Vivo Y78+ bricks. For this reason, it is recommended to enter Recovery Mode. Here’s how.

• Step 1: Press and hold the Power button and select the Restart option. During the reboot, press the Volume Up and Power keys simultaneously.

• Step 2: The main menu will show three options: Reboot, Wipe Data, and Connect with MIAssistant. Choose Reboot.

Explore Dedicated Software Tools To Fix Bricked Phones

Vivo Y78+ offers its official software tools, such as the Vivo Y78+Flash Tool. It’s designed for advanced users familiar with flashing firmware onto their devices. Here’s how.

• Step 1: Download and install the Vivo Y78+Flash Tool .

• Step 2: Download the Stock Firmware of Vivo Y78+ and extract it on your computer. Press and Hold the Power and Volume Down buttons for at least 5-10 seconds to enter Fastboot Mode.

• Step 3: Connect your Vivo Y78+ to the computer using a USB cable. Launch Vivo Y78+Flash Tool and locate the Firmware you have downloaded on the computer. Click the refresh > flash to begin the flashing process.

• Step 4: The SUCCESS result should appear in the Vivo Y78+Flash Tool once the flashing process is done.

However, if the Vivo Y78+Flash Tool did not unbrick your Vivo Y78+, consider using Wondershare Dr.Fone - System Repair (Android). The platform allows you to unbrick your Vivo Y78+ with a few clicks.

Part 3. Reviving Your Vivo Y78+ Using Wondershare Dr.Fone - System Repair (Android)

Dr.Fone - System Repair (Android) equips Vivo Y78+ users with the ability to tackle soft brick and hard brick issues. This specialized Android repair tool enables you to restore your Vivo Y78+ through a streamlined process, requiring just a few simple clicks.

safe & secure

3,227,773 people have downloaded it

Key Features

Dr.Fone - System Repair (Android) offers several benefits to unbrick your Vivo Y78+ easily. Below are its key features.

• Fix Common Vivo Y78+ Problems in Minutes. This tool provides comprehensive solutions for common issues like black screen, Play Store not working, boot loops, or even bricked Android devices .
• Compatibility with Over 1000 Android Models. This app fixes glitches across modern Android devices. The software is compatible with an extensive range of models. Whether your Vivo Y78+ is unlocked or carrier-bound, restoration is not a problem.
• Unparalleled Software Flexibility. Dr.Fone - System Repair (Android) also boasts an added capacity to mend iOS devices. This versatile tool is your all-inclusive solution for mobile devices, ensuring convenience whether you own an iOS or Android device.

Advantage of Dr.Fone - System Repair (Android) for Unbricking Vivo Y78+

Here are three benefits to choosing Dr.Fone - System Repair (Android) for unbricking a Vivo Y78+. You’ll further believe Dr.Fone is a reliable assistant when reviving your bricked Vivo Y78+.

Simplified Firmware Management

Dr.Fone eliminates the tedious search for appropriate firmware when unbricking your Vivo Y78+. The platform automatically downloads the correct firmware for your device. The hassle of identifying and manually procuring firmware is removed, saving time and ensuring a smoother unbricking process.

User-Friendly Approach

One of Dr.Fone’s key strengths is its user-friendly design. It caters to users with varying levels of technical expertise by employing a step-by-step process. This approach guides users through the repair process with clarity. It reduces the requirement for advanced technical knowledge.

Free Version for Evaluation

Dr.Fone - System Repair (Android) offers a free version for everyone. It allows users to test its capabilities before committing to a purchase. This trial version grants users the opportunity to assess the tool’s effectiveness and suitability for unbricking their Vivo Y78+. This instills confidence before investing in a full license.

How To Unbrick Vivo Y78+ Using Dr.Fone - System Repair (Android)

Dr. Fone’s features are perfect for unbricking Vivo Y78+ devices. Below are the procedures to restore your Vivo Y78+ from its bricked state.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

• Step 1: Download and install Dr.Fone - System Repair (Android) on your computer. After launching the application, click System Repair. Then, click Android as the Vivo Y78+ device type. Connect your Vivo Y78+. Indicate Phone Brick as the Android issue and initiate the process by clicking Start.

• Step 2: Select the appropriate device information corresponding to your Vivo Y78+. Choose Brand, Name, Model, Country, and Carrier. Confirm by checking the I agree button, then proceed to the next step by clicking Next.

• Step 3: Given that the Vivo Y78+ lacks a Home button, click the Phone without Home button option. Follow the prompts displayed on-screen and proceed by clicking Next to initiate the process of restoring your bricked phone.

• Step 4: As your Vivo Y78+ enters Download Mode, the firmware download will start automatically. Follow the on-screen instructions. Wait for the system to initiate the repair procedure automatically. Upon completion, a message will pop up on the main window. Click Done to exit the tool. You can click Try again to repeat the process if needed.

You May Also like:

How To Fix iPhone Bricked After iOS 17/iOS 16/iOS 15 Update
How to Fix It If Your Vivo Y78+ Phone Got Bricked?

Conclusion

Don’t let a bricked Vivo Y78+ stand in your way. Use the array of techniques from basic troubleshooting to advanced software tools to breathe life back into your device. Unbrick your Vivo Y78+ to its full functionality using the methods provided or Dr.Fone’s adept assistance.

Lastly, you can still refer to Vivo Y78+ for repairs. It remains the primary solution in numerous cases. Utilizing your warranty can alleviate the associated costs. Seeking assistance from a specialized technician is also a viable route to consider for a thorough device assessment.

How to Fix the Soft Bricked Vivo Y78+?

Bricked phone is a serious problem, as your brick smartphone could be suffering from a soft brick or hard brick problem, and must be dealt with carefully. It is very common to see a brick smartphone these days. If you are wondering what exactly is a bricked phone, here is your answer.

A bricked phone, hard brick or soft brick, is a smartphone which refuses to start or boot all the way up the home/main screen of the Vivo Y78+ device. This issue is observed within most Android phones because users have a tendency to tamper with the Vivo Y78+ device settings, flashing new and customized ROMs and tweaking with the essential files. Playing around with the phone’s internal set-up leads to such errors, worst of them being a brick smartphone. Usually, a bricked phone does not switch on and stays frozen at the Vivo Y78+ device logo, a blank screen or even worse, doesn’t respond to any command, even the power on command.

If you are confused about the soft brick and hard brick problems and looking for solutions to fix your priced phone, then here is all you need to know.

Read on to find out more.

Part 1: What is the difference between soft brick and hard brick?

To begin with, let us understand the basic difference between a soft brick and hard brick issue. Both versions of a bricked phone prevent it from booting but differ in their causes and gravity of the problem.

A soft-brick problem is caused merely by a software error/crash and makes your device switch on automatically every time you manually turn it off. This phenomenon is referred to as Boot Loop. Soft bricked Android phones are not as difficult to fix as the hard bricked Android phones. It is convenient to say that a soft bricked phone only boots up half-way and not fully, whereas a hard bricked device does not switch on at all. A hard brick error is thus caused when the kernel, which is nothing but an interface for the software to communicate with the hardware, is tampered with. A hard bricked phone is not recognized by your PC when plugged in and is a serious problem. It requires troubleshooting techniques and cannot be easily fixed as the soft brick problem.

Hard bricked phones are a rare sight, but the soft brick is very common. Given below are ways to fix a soft brick Android phone. The techniques listed here are the best and the most efficient ways to get your phone back to its normal working conditions without losing your important data or damaging your device or its software.

Part 2: Stuck at the Boot Loop

This is the first sign of a soft bricked Android phone. Boot Loop is nothing but when your phone does not remain switched off and turns itself on automatically, and freezes at the logo screen or blank screen, every time you manually try to power it off.

Stuck at boot loop problem can be fixed by clearing your Cache partitions. These partitions are nothing but storage locations for your modem, kernels, system files, drivers and built-in Apps data.

It is advisable to clear Cache partitions regularly to keep your phone free from such glitches.

Since the phone refuses to boot, Cache can be cleared from entering into the Recovery Mode. Different Android devices have different ways to put it in recovery mode. Normally pressing the power key and volume down key helps, but you may refer to your phone’s guide for better understanding and then follow the steps given below to clear the cache partition:

Once you are the recovery mode screen, you will see a number of options as shown in the screenshot.

Use the volume down key to scroll down and select ”Wipe cache partition” as shown below.

>

After the process is completed, select “Reboot System” which is the first option in the recovery mode screen.

This method will help you erase all the clogged up and unwanted files. You may loose some App related data, but that is a small price to pay to fix your bricked phone.

If this method does not boot up your brick smartphone and the problem still persists, there are two more things you can try. Read ahead to find out about them.

Part 3: Booting straight into recovery mode

If your bricked phone does not boot up to your Home Screen or Lock screen and instead boots directly into Recovery Mode, there is not much left to do. Booting straight into recovery mode is undoubtedly a soft brick error but it also indicates a possible problem with your current ROM. The only option you have to flash a new ROM to reboot your bricked phone back to its normal functioning.

To flash a new ROM:

Firstly, you must root your phone and unlock the Bootloader. Every phone’s mechanism to unlock the bootloader is different, thus, we suggest to refer to your user manual.

Once the Bootloader is unlocked, take a backup of all your data by selecting “Backup” or “Android” back in recovery mode. The process should not take long and all you need to do is tap “OK” to config backup.

In this step, download a ROM of your choice and store it in your SD Card. Insert the SD Card in your phone to begin the flashing process.

Once at the recovery mode, select “Install Zip from SD Card” from the options.

Scroll down using the volume key and use the power key to select the downloaded ROM.

This might take a few minutes of your time, but once the process is complete, reboot your phone.

Hopefully, your bricked phone will not boot normally and work smoothly.

Part 4: Booting straight into Bootloader

If your bricked phone boots straight into Bootloader, then this a serious issue and must not be taken lightly. Flashing a new ROM or clearing cache partitions are of little help in such a brick smartphone situation. Booting straight into Bootloader is a peculiar soft bricked Android phone feature and can be tackled only by downloading and flashing your original ROM from the manufacturer. In order to do so, a detailed study about your manufacturer’s ROM, ways to download and flash must be carried out. Since different Android phones come with different types of ROMs, it difficult to cover all the aspects about the different types of ROMs.

Brick smartphone problem has become more prominent than phone freezing or hanging issue. Android users are often seen looking for solutions to fix their soft brick and hard brick phones. Android phones are prone to get bricked and thus, it is important for us to know about the three techniques given above. These methods have been tried, tested and recommended by ay affected bricked phone users. Therefore, these tips are reliable and worth a try. So if your phone acts stubborn and refuses to boot normally, examine the problem carefully and adopt one of the solutions given above which best suits your situation.

Quick Fixes for Why Is My Vivo Y78+ Black and White

Why is My Vivo Y78+ in black and white? This sudden shift in display colors can be perplexing and impact user experience. This issue affects various devices, including Vivo Y78+ and other Android models. The abrupt shift to monochrome can impact your daily use. It can make apps and content appear dull.

If you’re asking why is my Android phone in black and white, then you’re in luck. Dive into the article below to unravel the causes behind your phone’s black-and-white display. Discover insights on addressing this unexpected issue, enhancing your overall mobile experience.

Part 1. Phone Screen in Black and White? Easy Fixes for Android Devices

Discovering your Vivo Y78+ going monochrome can be annoying. The section below answers the question: why did my Vivo Y78+ phone go black and white? It involves a combination of software adjustments and careful troubleshooting. Follow the practical solutions below to restore vibrant colors to your device.

Accessibility Settings

Accidental activation of accessibility settings may turn your display monochromatic. The “Grayscale“ or “Color Inversion“ option in the Accessibility or Vision section of your phone’s settings might be enabled. It can cause a black-and-white display. Here’s the solution:

• Step 1: Open your phone’s settings. Navigate to the Accessibility or Vision section.

• Step 2: Disable the Grayscale or Color Inversion option.

App Conflicts

Certain third-party apps can cause conflicts, leading to a black-and-white display . Newly installed apps might be the culprit, affecting your device’s color settings. Some apps also have grayscale modes that can impact the overall display. Here’s how to fix it:

• Step 1: Identify and uninstall recently installed apps.
• Step 2: Check individual app settings for grayscale modes.

System Glitches

System glitches or software bugs can trigger display issues. It can result in a black-and-white screen. Outdated software versions may contain bugs affecting color output as well. Regularly checking for software updates can prevent or resolve such glitches. Here’s how.

• Step 1: Go to your phone’s settings. Check for software updates in the Software update or System update section.

Click here

• Step 2: Update your device if there is a software update available. Ensure your device is running the latest software version.

Battery Saving Modes

Battery-saving modes can also alter display settings to conserve energy. It can sometimes result in a black-and-white screen. These modes limit power consumption by reducing color output. Reviewing and adjusting these settings can restore the normal color display. Follow the steps below.

• Step 1: Open your Vivo Y78+’s Settings. Navigate to the Battery or Battery & Performance section.

• Step 2: Check and adjust battery-saving settings, including toggling power-saving modes on or off.

Hardware Issues

In rare cases, hardware issues may cause a black-and-white display. Physical damage, loose connectors, or problems with the display hardware can impact color reproduction. Identifying and addressing these hardware issues may be crucial for resolving the problem. Here’s what you should do.

• Step 1: Check for physical damage, loose connectors, or display hardware issues.

• Step 2: Seek professional assistance or contact the Vivo Y78+ device manufacturer if hardware problems are suspected.

Consider a reliable third-party tool if your phone persists in black and white despite troubleshooting attempts. Tools such as Dr.Fone System Repair Android offer advanced solutions for complex system issues. They ensure your phone regains its vibrant display without a hitch.

Part 2. Using a Dedicated Tool: Dr.Fone for Fixing Black and White Display Problems

Dr.Fone is a reliable solution for addressing black-and-white display issues on Android devices. For a stress-free repair experience, follow these simple steps using Dr.Fone - System Repair (Android).

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

• Step 1: Download and install Dr.Fone. Launch the program and click on System Repair on the main window. Connect your Vivo Y78+ to the computer using the correct cable. Choose Android among the options.

safe & secure

3,601,336 people have downloaded it

• Step 2: Provide accurate device information, including brand, name, model, country/region, and carrier details. Confirm the warning and click Next.

• Step 3: Follow the on-screen instructions and wait for the program to download the firmware. Once downloaded and verified, Dr.Fone automatically initiates the repair process on your Vivo Y78+.

• Step 4: After a while, your Vivo Y78+ will have all system issues fixed. Click Done to complete the process or choose Try again if the problem persists, allowing you to repeat the steps.

Note

It’s highly recommended to back up your Android data before using Dr.Fone for repair.

How Dr.Fone Can Help You Beyond Display Issues

Beyond resolving black-and-white display problems, Dr.Fone serves as a comprehensive tool for all Android issues. The platform can enhance your device functionality.

Key Features

Here are key features that make Dr.Fone an invaluable resource:

• Fix All Kinds of Android Problems

Dr.Fone is designed to address a wide range of Android issues. These include black screens, malfunctioning Play Store, app crashes, boot loops , and bricked Android devices . Its versatility makes it a go-to solution for diverse system challenges.

• Wide Device Compatibility

With support for over 1000 Android models, Dr.Fone ensures compatibility with a vast array of devices. The platform is versatile and a widely applicable tool for Android users.

• High Success Rate

Dr.Fone boasts a high success rate in resolving Android issues. It provides users with confidence in its effectiveness and reliability.

Additional Functionalities

Below are additional functionalities of Dr.Fone that support your device to keep it in top shape.

• **Phone Manager.**Fone acts as a comprehensive phone manager. It allows you to transfer contacts, SMS, photos, videos, and more between your Vivo Y78+ and computer. The feature simplifies data management and ensures seamless organization.
• Phone Backup. The tool enables selective backup of Android data on a computer. It provides you with the flexibility to safeguard essential information. The selective backup feature ensures efficient use of storage and allows for easy restoration when needed.
• **Screen Unlock Without Losing Data.**Fone offers a secure way to unlock the screen of Android devices without losing data. You can regain access to your devices without compromising valuable data, whether due to forgotten passwords, pattern locks, or PINs.

Part 3. Tips for Maintaining Your Phone Display Brilliance

Maintaining a vibrant phone display enhances user experience and ensures optimal visual clarity. Follow these tips to keep your phone’s display at its best:

Adjust Brightness Mindfully

Optimize brightness settings based on ambient lighting. Avoid excessively high brightness levels, which can strain your eyes and impact battery life.

• Update Regularly

Keep your phone’s software up-to-date to benefit from performance enhancements, bug fixes, and display optimizations provided by system updates.

• Be Mindful of Background Apps

Close unused background apps to free up system resources and prevent unnecessary strain on your phone’s display and overall performance.

• Use Static Wallpapers

Dynamic wallpapers and live backgrounds consume more power. Opt for static wallpapers to reduce battery drain and maintain consistent display performance.

• Avoid Extreme Temperatures

Exposure to extreme hot and cold temperatures can affect your phone’s display and overall performance. Store your device in a moderate environment.

• Implement Screen Timeout

Set a screen timeout to turn off the display when not in use automatically. This conserves battery life and prevents unnecessary wear on the screen.

• Clean Your Screen Regularly

Fingerprints, dust, and smudges can affect display clarity. Clean your screen regularly with a microfiber cloth to ensure a crisp and vibrant view.

• Secure Your Phone

Implement security measures to prevent unauthorized access. This protects your data and ensures the display remains secure and untouched.

• Enable Night Mode

Many phones offer a night mode that reduces blue light emission. It promotes better sleep and reduces eye strain, especially during nighttime use.

• Implement App-Specific Settings

Some apps have specific display settings. Explore and adjust these settings within individual apps to enhance your visual experience and reduce strain.

Conclusion

The guide highlights the “Why is My Vivo Y78+ black and white“ query. It offers practical solutions for Android and Vivo Y78+ users. By addressing common issues such as accessibility settings, app conflicts, and system glitches, you can restore their vibrant displays. Maintaining your phone display involves mindful practices, from adjusting brightness to regular updates.

The guide provided solutions for display issues and showcased the versatility of Dr.Fone System Repair Android. It’s a holistic solution for users seeking a seamless and reliable Android experience, addressing diverse concerns with precision and efficiency.

Also read: