My Videos Aren’t Playing on Tecno Spark 10 4G – What Can I Do?

There’s a reason Android holds over two-thirds of the mobile operating system market share. It’s a powerful OS that gives you the utmost freedom and flexibility, allowing you to customize your phone to suit your needs.

However, regardless of the capabilities of Android phones and the features that come with their OS, just like any other smartphone, they’re prone to glitches and annoying issues – especially with their video files.

You may encounter videos not playing on your Tecno Spark 10 4G more frequently than you like. Whether it’s video files you’ve recorded using your phone or files you’ve downloaded, this glitch can get pretty annoying pretty fast. Fortunately, there are several solutions you could try to fix it.

See what you can do if videos won’t play on your Android.

Why Are My Videos Not Playing On Android?

Considering how most smartphone manufacturers tend to emphasize the unbelievable quality of their cameras, perfect night modes, seamless slow-motion recordings, superb resolution, and more, you’d expect all images and videos to function flawlessly on your Android. Unfortunately, that’s not always the case.

Occasionally, you could find that the videos you access from your gallery won’t play, sending you the message that “video cannot be played” or “can’t play video.” Other times, you might find that YouTube videos won’t load correctly or your downloaded videos won’t open in your media player.

There could be a wide variety of reasons that is happening, including:

• Corrupted video
• Corrupted SD card
• Outdated media player
• Outdated OS
• Incomplete download from the source
• Low storage
• Video downloaded from a suspicious source

An array of hardware and software issues could lead to you being unable to play videos on your Android. However, that doesn’t mean you should immediately send your device for repairs or delete the videos that won’t play. There might be a few better solutions you could try.

What You Can Do if Your Videos Aren’t Playing On Android Phone

Since there are many reasons for having problems with videos not playing on your Android, you could also try many solutions.

1. Do a Factory Reset

While a factory reset shouldn’t always be the first solution you go to, it can usually prove to be the most effective one.

A factory reset, aka a master reset or a hard reset, returns all your software configurations to the original state when the phone was first manufactured. In the process, all your data is lost – any photos and videos you have on your phone and the apps you’ve installed will be deleted. You’ll be logged out of all your accounts and won’t have access to your message history, contacts, and more.

While it seems like an extreme step, it can help fix any video issues you might encounter due to software bugs.

Though there could be slight variations between different phones, you can usually perform a factory reset by going to Settings > General Management > Reset > Factory data reset > Reset.

Click here

2. Restart Your Tecno Spark 10 4G

While a factory reset is all but guaranteed to fix the issues you’re encountering with your videos, sometimes a simple restart might do the trick just fine. A restart works by clearing your RAM (Random Access Memory).

In a nutshell, RAM stores short-term data that helps your processor complete tasks quickly. This data is always easily accessible, and it’s what helps your phone quickly open webpages and apps you’ve recently used.

Over time, however, your RAM can get filled with unnecessary data and data fragments, which, in turn, can confuse your processor.

Restarting your phone will clear your RAM and potentially eliminate any data fragments causing your videos to be unplayable.

3. Check the Video Format

As a general rule of thumb, the videos you capture should be in a format your device supports. However, the videos you’ve downloaded might not be. That’s why checking the files’ video format before trying other possible fixes is in your best interest.

If the format isn’t supported, installing the right video player with the necessary compatibility is the most straightforward fix. Some of the most popular video players for Android include VLC for Android, GOM Player, MX Player, Bsplayer, and RealPlayer. You can easily find all of them in the Google Play Store.

4. Check the Internet Connection

If you’re having problems playing downloaded or online videos, check your internet connection to see if there’s an issue there. If your internet’s down, any downloaded videos might not have downloaded correctly, and any online videos that haven’t been loaded will not play.

Make sure that you turn the Airplane mode off and your Wi-Fi on. Check the connection and test your internet speed to see if everything works properly.

You might need a network reset if your phone can’t connect to a Wi-Fi network. The path might differ between Android devices, but you should be able to find the option for a network reset at the exact location of your factory reset. Go to Settings > General Management > Reset > Reset Network settings > Reset settings.

5. Clear the Cache

The cache stores a copy of your most commonly used data, helping decrease loading time and improve your phone’s performance. However, too much cache data can take up too much space and cause data corruption, preventing you from accessing some of your apps.

On average, you should clear your phone’s cache every few months to ensure that everything runs smoothly. If you encounter issues with your videos not playing on Android, clearing the cache could be just the fix you need.

To clear the cache from your apps, you’ll want to go to Settings > Apps. From there, select the app you want to remove the cache from, scroll down to Storage, then choose Clear Cache.

6. Update Android OS

An outdated Android OS is usually the culprit behind many bugs and glitches you may encounter on your phone. It can prevent you from playing video files, accessing apps, taking photos, and more. It can lead to data corruption and loss, expose you to malware and cyberattacks, and compromise phone performance.

Regularly updating your OS to its latest version is always in your best interest. It can solve the problem of your videos not playing and protect you and your sensitive data.

7. Repair Your Android OS

You might already have the latest version of Android OS, but that still doesn’t mean your OS is functioning as it should. Maybe your phone was interrupted while downloading or installing the new OS version. Maybe your phone had underlying OS issues, or you accidentally downloaded files you shouldn’t have. Whatever the case is, if your videos don’t play due to an OS problem, you’ll need to repair your OS.

The best way to do it is with a reliable Android OS repair solution like Wondershare Dr.Fone.

Fast, efficient, and powerful, Wondershare Dr.Fone can repair your Tecno Spark 10 4G in several simple steps:

• Step 1: Download and launch Wondershare Dr.Fone on your PC.
• Step 2: Go to Toolbox, then use a cable to connect your Tecno Spark 10 4G to your PC.

• Step 3: Select System Repair > Android.
• Step 4: In the new window, select Start.

• Step 5: Fill in information about your phone’s Brand, Name, Model, Country, and Carrier.
• Step 6: Agree with the warning and select Next.

• Step 7: Follow the on-screen instructions to put your device in Download Mode.
• Step 8: Wondershare Dr.Fone will automatically start downloading the necessary firmware, so wait for the process to finish.

• Step 9: When the download is complete, select Fix Now to install it.
• Step 10: Type 000000, then select Confirmto continue fixing your device.

• Step 11: Wait for the Repairing Nowprocess to finish.
• Step 12: Once the process is complete, click Done.

If the reason your videos wouldn’t play on your Tecno Spark 10 4G was a fault in the OS, everything should be functioning well after repairing your phone with Wondershare Dr.Fone.

Remember that repairing your device with Wondershare Dr.Fone might result in data loss. Back up all your essential data before fixing your OS using this software to stay safe.

8. Update the Video App

Sometimes, it’s not the outdated OS version causing issues but rather the out-of-date video app. Like OS updates, app and other software updates often contain fixes for common problems and security patches. Not every update is there simply to introduce new features.

To check whether you’re using the latest version of your video player, go to Settings > Apps. Find your video player app, tap it, and scroll down to the bottom of the page to see the version installed on your phone.

9. Clear Cookies and Browsing Data

If online videos are causing problems, not your recorded or downloaded ones, you might be due for a quick cookie and browsing data clearing.

Cookies are usually there to improve the user experience, allowing you to load websites faster and enjoy improved performance. However, if your cookies and browsing data occupy too much space, they could pose problems.

You’ll first need to launch your mobile browser to clear cookies and browsing data. If you’re using Google Chrome, the process is simple and streamlined. Tap the three dots in the upper right corner and go to Settings. From there, go to Privacy and security > Clear browsing data > Clear data.

10. Reinstall Video Apps

If you still have issues with videos not playing on your Tecno Spark 10 4G, you could try deleting and reinstalling your video apps. Sometimes, simply updating the video app might still retain the glitch causing problems. However, if you delete it in its entirety and then install it again, the issue should be gone.

To uninstall the video app on your Android, go to Settings > Apps. Locate the app you want to delete, then tap Uninstall at the bottom of your screen.

To reinstall it again, go to the Google Play Store, search for the video app you want to have, then click Install.

safe & secure

4,974,400 people have downloaded it

Conclusion

Like other smartphones, Android devices occasionally encounter glitches when playing video files. In most instances, the solution can be as simple as restarting your device. In others, you might have to perform a full factory reset or use software like Wondershare Dr.Fone to repair your Android OS.

Whatever the case is, don’t despair. There’s usually a solution that can fix the problem and ensure your device works as expected.

Calls on Tecno Spark 10 4G Go Straight to Voicemail? 12 Fixes

Have you ever experienced incoming calls to your phone go straight to voicemail without ringing? It can be frustrating, especially if you’re expecting an important call. It could be due to simple things like turning down the volume or forgetting to turn off the Do Not Disturb mode. In other cases, it might be because you accidentally blocked the caller’s number.

In most cases, incoming calls going to voicemail without ringing are common. However, if it’s happening frequently or for all calls, your phone may have a problem.

This article will discuss why incoming phone calls go straight to voicemail and how to fix the problem. We’ll also show you how to use Wondershare Dr.Fone, a powerful Android System Repair tool, to solve such issues. So, if you’re uncertain why that last call went straight to voicemail, keep reading, and we’ll cover everything you need to know.

Part 1: Not Ringing? Here’s Why Calls on Your Phone Go Straight to Voicemail

If an incoming call to your cell phone goes straight to voicemail without ringing, there could be a few reasons. Here’s what to look for and what you should do to fix it:

1. Turn Off Do Not Disturb (DND) Mode

DND mode is a feature that silences all incoming calls, notifications, and alerts. If DND mode is enabled, your cell phone goes straight to voicemail when someone calls. To turn off DND mode, swipe down from the top of the screen to open the notification settings panel, then tap the Do not disturb icon.

Here’s an alternative way:

• Step 1: Open the Settings app and go to Notifications.
• Step 2: Tap Do not disturb.

• Step 3: Toggle Do Not Disturb offto disable the mode.

2. Turn Off Call Forwarding

One reason calls go straight to voicemail without ringing is if you enabled call forwarding. Call forwarding is a feature that redirects incoming calls to another number. To turn off call forwarding:

• Step 1: Open the Phone Dialer app on your device, then tap the menu icon and select Settings.

• Step 2: Navigate to Supplementary services > Call forwarding.

3. Disable Call Barring

If a phone call went straight to voicemail, another possible explanation is the call barring. It is a feature that restricts calls from being made or received on your phone. If activated, it can cause incoming calls to a phone to go straight to voicemail. To turn off call barring on Tecno Spark 10 4G devices:

• Step 1: Open the Phone Dialer app, then tap the menu icon in the top right corner.
• Step 2: Go to Settings > Supplementary services > Call barring, then tap OK.
• Step 3: Select Voice call, then turn off your preferred outgoing and incoming calls. When prompted, enter 0000 as a password.

4. Update Your Phone’s Software

Sometimes, software bugs can cause problems with incoming calls, which may be why your last incoming call went straight to voicemail. If your phone runs outdated software, try updating it to the latest version.

To check for updates, open the Settings app and go to Software update or System update. For a seamless update experience, follow the step-by-step instructions on your mobile screen.

5. Reset Network Settings

If the incoming calls on your phone go straight to voicemail, consider resetting your phone’s network settings. Network settings control how your phone connects to the cellular network. If these settings are not set up correctly, incoming calls may not be able to reach your device.

Note: Resetting your network settings will erase any saved Wi-Fi networks and Bluetooth pairings, requiring you to re-enter them after the reset is complete.

To reset your network settings on most Android devices:

• Step 1: Open the Settings app on your smartphone, then tap System or General Management.
• Step 2: Go to Reset > Reset Network Settings and confirm the action.

6. Turn Off Bluetooth

When Bluetooth is on, it can interfere with your device’s ability to receive calls, causing them to go straight to voicemail without ringing. To turn off Bluetooth on an Android device, you can do one of the following:

• Swipe down from the top of the screen to open the Quick Settingspanel, then tap the Bluetooth icon to turn it off.

• Go to Settings> Connections > Bluetooth and toggle the switch off.

It should help ensure that calls come through to your phone instead of going to voicemail.

7. Check Airplane Mode

If turning off Bluetooth didn’t solve the issue, another possible cause could be that your phone is in Airplane Mode. Airplane Mode turns off all wireless connections on your phone, including cellular service, which can cause calls to dial straight to voicemail. There are two ways to turn off Airplane mode on Android:

Using the Settings app:

• Step 1: Open the Settings app.
• Step 2: Tap Network & internet.
• Step 3: Toggle off Airplane mode or Flight mode.

Using the Quick Settings panel:

• Step 1: Swipe down from the top of the phone screen to access the Quick Settings panel.
• Step 2: Look for the Airplane mode or Flight mode icon, then tap it to turn it off.

8. Check Blocked Numbers

“My boyfriend’s phone goes straight to voicemail when someone is calling. Any idea why that might be?”

Do you also find yourself asking what does it mean? It could be that he has blocked that phone number. To check this:

• Step 1: Open the Phone dialer app.
• Step 2: Tap the menu icon in the top right corner and select Settings.
• Step 3: Tap Block numbers. If you find the number in the blocked list, remove it to ensure that their calls come through to the phone.

If you still have trouble reaching your boyfriend, try calling him from a different number. If your call didn’t go through, you know that he hasn’t blocked your number and that there may be another issue with his phone.

9. Turn Off Google One VPN

If you’re using Google One VPN, try turning it off to see if that fixes the problem. Some users have reported that Google One VPN can cause incoming calls to a phone to go straight to voicemail. To turn off Google One VPN:

• Step 1: Open the Google One app on your Tecno Spark 10 4G.
• Step 2: At the bottom, go to the Benefits tab, then tap View Details below the Online protection with a VPN section.

• Step 3: Toggle off Enable VPN.

10. Contact Your Carrier

If your phone calls go straight to voicemail after trying all the above, contact your carrier for help. They may be able to troubleshoot the problem or determine if there is a service outage in your area.

And if your carrier confirms that there is no service outage or billing-related block, the problem may be with your phone itself. You may need to try resetting your phone to factory settings or taking it to a repair shop.

11. The Caller Used Ringless Voicemail

Ringless voicemail is a service that allows businesses to bypass your phone’s ringtone and send you pre-recorded messages directly to voicemail. Ringless voicemail is often used for marketing purposes. If you think you’re receiving ringless voicemail calls, you can contact the company calling you and ask them to remove you from their list.

Part 2: Not Clear About the Root Cause? Troubleshoot Directly by Wondershare Dr.Fone

If you’re unsure what’s causing your calls to go straight to voicemail, you can try using the Dr.Fone System Repair tool. This software can scan and repair your phone for any underlying problems, which may fix the issue and get your calls ringing again.

Dr.Fone supports over 1000 Android models, including unlocked Tecno Spark 10 4G models and models from carriers like AT&T and Vodafone. It has an intuitive interface and is easy to use, even for beginners. Learn below the steps on how to use Dr.Fone System Repair to fix incoming calls that dial straight to voicemail:

• Step 1: Download Dr.Fone on your computer, then launch it once installed.

safe & secure

4,118,635 people have downloaded it

• Step 2: Connect your smartphone to your desktop or computer using a USB cable. Next, from the Toolbox homepage, select System Repair.

• Step 3: Select Android as the Tecno Spark 10 4G device type.

• Step 4: Click Start to begin repairing your smartphone.

• Step 5: Select the Tecno Spark 10 4G device details on the Name, Model, Country, and Carrier drop-down lists. Next, select the agreement checkbox, then click Next to proceed.

• Step 6: Follow the in-app instructions to enter Download mode on your Tecno Spark 10 4G, then click Next.

• Step 7: Wait while the app downloads the firmware; once done, click Fix Now.

• Step 8: Enter the code in the input box to verify the Tecno Spark 10 4G device information in the dialogue box, then click Confirm.

• Step 9: The app will start repairing the system issue on your Tecno Spark 10 4G. Once completed, your app should restart, then click Done to close the app.

You May Also Like:

Top 5 Best Android System Repair Apps

How to Fix It: Android Stuck on Boot Screen?

How to Flash Dead Android Phone Safely

Conclusion

When your phone calls go straight to voicemail without ringing, it can be a frustrating and disruptive experience. Not only do you miss important calls from work, friends, or family, but it also leaves you feeling disconnected and out of the loop. As a temporary measure to avoid missing important calls, check your voicemail regularly.

For a prompt solution, consider using Dr.Fone if incoming calls on your phone go straight to voicemail. It is a powerful mobile solution that can also address other system problems, including stuck boot loops, app crashes, black screens, and bricked devices. If you consistently experience this issue, it’s advisable to reach out to a professional for assistance.

safe & secure

4,215,287 people have downloaded it

Reliable User Guide to Fix Tecno Spark 10 4G Running Slow and Freezing

Android smartphones have opened a lot of doors for their users. They continue to evolve year after year with the hope of giving the world a wonderful digital experience. So far, we can all agree that they’re going the extra mile and doing a really great job. Android phones today are all packed with supreme capabilities that are beneficial to everyone.

However, Android phones are still not close to perfect. They also act up sometimes and cause a stir. Some users have observed that the Android phone is running slow and freezing over time. There can be many potential reasons why Android phone runs slow suddenly. But it doesn’t mean it cannot be restored at all to its original state and function.

In this article, we will review the details of this Android phone issue. We’ll provide solutions you can try if you ever get caught in the same problem. Continue reading to learn more.

Understanding the Specs That Make Android Phones Run Fast

The issue of Android phone running slow and freezing is not limited to old devices only. The same problem has also been observed in newly purchased units. The roots of this unfortunate occurrence vary from one user to another. It depends on different elements, from external factors like users’ handling of the Tecno Spark 10 4G device to internal factors such as its capabilities. To understand it more, below are some Android phone specifications related to the Tecno Spark 10 4G device’s overall performance and speed.

The CPU Core Count

Unlike before, Android phones today are equipped with several cores. Each of them has the ability to execute a process alone. Therefore, the Tecno Spark 10 4G device can handle two or more tasks at once without compromising the quality of its performance. If your Tecno Spark 10 4G contains more CPU core, its performance surely be more powerful and speedy.

The CPU Clock Speed

Simply put, clock speed is basically the speed at which the CPU cores can carry out a cycle in a second. A faster clock speed definitely translates into the Tecno Spark 10 4G device’s higher performance. For instance, an octa-core Android phone with a one GHz per second clock speed is a decent device. But it’s less powerful than a device with the same number of cores but runs at two GHz per second.

Random Access Memory

In a simple language, Random Access Memory (RAM) temporarily stores the data from apps that are currently running. Smartphones can be more flexible with multi-tasking if their RAM has enough space. So if you’re among these users who perform multiple tasks simultaneously, you better choose a device with more RAM.

Internal Storage

The mobile applications installed on your smartphones are directly related to internal storage. The apps save their data every time, so they behave strangely when the Tecno Spark 10 4G device runs out of storage. If you’re using heavy mobile applications, it’s best to opt for smartphones with huge internal storage.

Reasons Why My Tecno Spark 10 4G is Running Slow

It’s not really hard to tell why your Tecno Spark 10 4G is slow because it’s apparently a common issue among users. But don’t worry. Most of the time, the problem is not a major concern. Here are some scenarios that may slow down your Tecno Spark 10 4Gs.

Overloading Background Processes

It’s great to have an Android phone that can flawlessly multi-task. However, not all units can handle that well. As mentioned earlier, it depends on the CPU core count and the core’s clock speed. If your Tecno Spark 10 4G is running slow and freezing, many processes may be happening at the same time. Your device’s cores and clock speed are potentially incapable of executing such demands.

Your Phone is Running Out of Storage

Mobile apps need to save data on your phone. They perform the tasks based on the data stored on the Tecno Spark 10 4G device. So if your Tecno Spark 10 4G is slow, it’s possible that your device is already running out of storage. Each app has its own storage requirement. If your phone goes below that, the app will surely crash and not work.

Animation Speed is Way Too Slow

You can modify the Tecno Spark 10 4G device’s animation type and speed on your Tecno Spark 10 4G via the developer’s option. However, altering its default settings can sometimes make the Android phone run slow. If the speed is set slower, more delays are added to the animation. Hence, it takes a while for Your Tecno Spark 10 4G to launch an app or complete a certain process.

You’re Using an Outdated Android Version

If your Tecno Spark 10 4G is running slow and freezing, the Tecno Spark 10 4G device’s software is probably outdated. The mobile apps installed on your device are lagging or crashing because they’re no longer compatible with the OS. It happens most of the time. Hence, always watch out for OS updates.

Your Phone is Experiencing Some System Issues

Operating systems and device software serve as the main component of all smartphones. Sometimes, it runs into inevitable problems caused by computer bugs and other glitches. When it happens, the Tecno Spark 10 4G device’s overall performance is affected. So that can be the reason why sometimes your Tecno Spark 10 4G is running slow and freezing.

Your Internet Connection is Unstable

Of course, a slow internet connection can make the Android phone runs slow too. Most apps today rely heavily on the internet to execute some tasks like communicating and streaming. So don’t panic when your Tecno Spark 10 4G is running slow and freezing. It’s possible that your internet connection is messing up with you.

What to Do When My Tecno Spark 10 4G Lags?

It’s not as bad as the black screen of death when the Android phone runs slow. However, it can still cause some delays and inconvenience for users. So it’s really important to take action when you notice some anomalies with its speed and performance. Below are some remedies that can help you get rid of this issue.

Solution 1: Reboot Your Phone

Sometimes, minor bugs can give your device a hard time. It can be the reason why your Tecno Spark 10 4G is running slow and freezing. If that’s the case, rebooting your phone might help a lot. Here’s how to do it.

• Step 1: For seven seconds or more, hold the Power and the Volume Down button together.

• Step 2: Several options will manifest on the screen. From there, click Restart. Wait until your device completely shuts off and restarts again.

Solution 2: Uninstall the Unused Apps to Free Up Some Storage

If your Tecno Spark 10 4G is running slow and freezing, it’s likely because you’re running out of internal storage. You may uninstall the apps you rarely use to free up some space. Here’s how to do it.

• Step 1: On your home screen, find the app you wish to uninstall. Hold its icon until an option list appears.
• Step 2: Click Uninstall.

• Step 3: Click Ok if it asks you to confirm the action.

Wait until the app icon disappears from the home screen.

Solution 3: Set the Animation Speed a Little Faster

Altering the animation speed is not that dangerous. However, it can sometimes interfere with the Tecno Spark 10 4G device’s smoothness if set too slow. If your Tecno Spark 10 4G is running slow and freezing after modifying this setting, try to re-adjust it a little faster. Here’s how to do it.

Initiate the following steps first to enable the developers option on your device. Skip this if you have already activated the developers option:

• Step 1: Go to Settings.
• Step 2: Find the About Phone option. Click on it.

• Step 3: Find the Build Number. And then click on it seven times.
• Step 4: Enter your lock screen passcode if necessary.

Follow these steps to adjust the animation speed:

• Step 1: Tap Settings from your home screen.
• Step 2: From the given options, find and click Systems.
• Step 3: Click Developers options.
• Step 4: Under the Drawing section, you’ll find the following animation scale settings: Window Animation Scale, Transition Animation Scale, and Animator Duration Scale. Adjust the speed of these three options to 0.5x.

Solution 4: Update Your Phone to the Latest Android Version

It’s always recommended to update your phone to the latest Android version. Aside from repairs to some system errors, it also keeps your phone compatible with mobile apps. An outdated operating system can be the reason why your Tecno Spark 10 4G runs slow, and the apps are freezing. Don’t worry. It’s very easy to perform. Here’s how to do it.

• Step 1: First, ensure your internet connection is strong and stable to avoid unwanted interruptions.
• Step 2: Go to Settings.
• Step 3: Click About Phone.
• Step 4: Click Check Now for Update. If there’s new software available, it will automatically appear on the screen.
• Step 5: Click Install Now. Depending on your device, it will restart itself after the installation process.

Solution 5: Reset Your Tecno Spark 10 4G to Factory Settings

One way to restore the original performance of your Tecno Spark 10 4G is to revert it back to factory settings. It deletes all the phone’s data and adjusts the settings to default. Most of the time, this procedure works magic. It fixes numerous issues, including the Android phone that’s slow and constantly freezing. But ensure your phone has already been backed up before commencing this step. You may use Wondershare Dr.Fone to help you back up and secure your files.

Here’s how to back up your Tecno Spark 10 4G using Wondershare Dr.Fone:

• Step 1: Download Wondershare Dr.Fone from its official website. And then install it on your desktop.
• Step 2: Launch the application on your computer.
• Step 3: After it fully loads, connect your Tecno Spark 10 4G to your computer.
• Step 4: From the main dashboard, find and click Phone Backup. Ensure your device is in USB Debugging mode.

Step 5: Check the files or data you wish to back up. Right after, click Backup.

Here’s how to reset your Tecno Spark 10 4G to factory settings:

• Step 1: Go to Settings.
• Step 2: Click System.
• Step 3: Click Reset Options.
• Step 4: Click Erase All Data (Factory Reset).
• Step 5: Your Android phone will inform you about the data that will be deleted from this procedure. From there, click Reset Phone.
• Step 6: Your Android device will ask you to confirm the procedure. From there, click Erase Everything.

Solution 6: Fix the System Issue Using Wondershare Dr.Fone

The device’s operating system may sometimes run into unexpected problems. That can make your Tecno Spark 10 4G performs slow. System issue is not a terrifying scenario at all. Thanks to Wondershare Dr.Fone, which provides instant repair to this kind of mobile problem. Here’s how to use it in easy steps.

• Step 1: Launch the Wondershare Dr.Fone application on your desktop. And then connect your Tecno Spark 10 4G to your computer.
• Step 2: Click System Repair from the main dashboard or Toolbox section.

• Step 3: Click Android.

• Step 4: Wondershare Dr.Fone will give you a list of the Android problems that this procedure will fix. From there, click Start.

• Step 5: Wondershare Dr.Fone will ask you to confirm your device details. Review the listed details for Brand, Name, Model, Country, and Carrier. Amend them if necessary. Tick the checkbox beside the Note if you agree to the terms. Lastly, click Next to proceed.

• Step 6: At this point, you need to put your device into Download Mode. Power off your device. And then hold these three buttons altogether: Volume Down, Home (or Bixby if you’re using a newer model), and Power buttons. Finally, press the Volume Up button.

• Step 7: Wondershare Dr.Fone will automatically download the firmware that matches your device’s specifications. Wait until the process has been completed.

• Step 8: Thereafter, the details about the newly downloaded firmware package will be displayed on the screen. From there, click Fix Now.

• Step 9:  Before initiating the installation process, Wondershare Dr.Fone will ask you to review and confirm the firmware details. It will also let you know that this procedure will erase the phone’s data. If you agree to the terms, enter 000000 into the input box and click Confirm.

• Step 10: Wait while Wondershare Dr.Fone installs the new firmware to your device.

• Step 11: A notification will immediately appear after installing the new firmware. Click Done if your phone starts normally. Otherwise, click Try Again to repeat the process.

safe & secure

3,660,347 people have downloaded it

Conclusion

Android phone is capable of performing lots of stuff. It can assist you in both your personal and professional tasks. But if it’s sluggish and doesn’t execute optimally, the good things it promises all go down the drain. So if you notice that your Tecno Spark 10 4G is running slow and freezing, act fast to resolve the issue. Wondershare Dr.Fone can be of great help in this kind of situation. It’s an all-in-one mobile solution that can assist you with system repair, phone backup, data recovery, and a lot more.

Also read: