Reasons for Vivo V29 Pro Stuck on Startup Screen and Ways To Fix Them

There are many reasons why phones get stuck on the boot screen. It could be something as simple as physical damage or more complicated related to software problems. Having your phone stuck on the logo screen, or boot screen is annoying, and it is no surprise that people will find ways to fix this issue when encountered.

This article will share the possible reasons why your phone is stuck on the boot screen. This article will share three possible reasons for this problem and three valuable tips to help fix this issue. If all else fails, there is an application that is recommended and is sure to solve your issue in no time. Keep on reading to find out more!

It is not uncommon for phones to be stuck on the startup screen, but finding out why this happens is tricky. This section identified some of the top reasons your cellphone could have gotten stuck on the startup screen.

Physical Damage to the Phone

If you accidentally dropped your phone or knocked it on a hard surface, you could have damaged the internal hardware of your phone. This could affect your phone’s ability to reboot and result in your phone being stuck on the boot screen.

If you are 100% certain that your phone has gone through physical damage, you should seek professional help to have your phone repaired or checked. It is advised not to fix this problem yourself as your phone’s internal parts are complicated and delicate. Look for an official phone repair store and get your phone fixed for issues like your phone getting stuck on the logo.

Liquid Damage

It is not common for your phone to expose to water. Rain or water splashes are unavoidable; sometimes, your phone gets wet. Little exposure to water on the surfaces of your phone is fine. However, if you fall into a pool with your phone or drop it in a puddle of water, your phone will likely suffer from liquid damage.

Even the tiniest water droplet that seeped into your phone could damage the internal hardware of your device, often leaving you with your phone stuck on the boot screen. The first thing to do when you accidentally submerge your phone in the water is to check if the water has damaged your phone.

For iPhone users, look for the water damage indicator. If you see that it has turned from white to red, it has suffered from water damage. You have two options if your phone has suffered liquid damage. One is dismantling your phone and letting it dry for at least 48 hours. Two is bringing your phone to a repair shop to fix it.

Software Issues

Software issues are probably the most common reason your phone is stuck on the logo screen. Eight times out of ten, software issues are either caused by a failed software update, using an older version of the operating system, or having a jailbroken phone. When the software does not successfully update, the phone will have no operating system, as the old system was erased before the new software was installed.

The older operating system is also not desired as your phone typically will send periodic updates to make sure your phone is up-to-date and free from bugs. Running applications on an older operating system might lead to issues like the phone being stuck on the boot screen or the logo. Hence, updating your phone to the latest software version would be better.

Part 2. 3 Helpful Ways To Fix Phones Stuck on Boot Screen

After understanding the common problems on why your phone is stuck on the startup screen page, here are three easy solutions to try solving yourself at home.

Hard reboot your phone

To quickly fix any of your phone issues, especially when stuck on the startup screen, perform a hard reboot. The term hard reboot means turning your device off and on again. You might think this is a simple option, but this is a tried and tested method that might work on a minor glitch that results in your smartphone getting stuck on the startup screen page.

Here is an example of performing a hard reboot for an Android phone such as Vivo V29 Pro. Preess and hold the Power and Volume Down buttons simultaneously for more than 7 seconds to perform the hard reboot.

Put your phone in recovery mode

If a hard reboot does not work, a natural next step is to try going into recovery mode. The recovery mode is specially designed to solve any software-related issues. It is important to note that entering recovery mode will delete all your corrupted files and replace them with a functional operating system. Hence, back up all your files to ensure you retain all your information.

Here is a step-by-step process for putting your Vivo V29 Pro or Redmi smartphone in recovery mode.

Step 1: Tap and press the Power button to switch off your Vivo V29 Pro/Redmi phone

Step 2:Hold the Volume Up and the Power buttons at the same time, then release the keys when the Main menu of Recovery mode appears on the screen.

Step 3: You can use the volumes buttons to navigate up and down and press the Power key to confirm the selection.

Factory Reset

If you do not want to attempt recovery mode, you can try resolving the issue of your phone being stuck on the startup screen through Factory Reset. Factory Reset, also called Hard Reset, erases all information and data on your device. As a result, it will return to the settings and recover the data it used to have when leaving the factory.

Here is an example of putting your Samsang smartphone into the Factory Reset DFU mode.

Step 1: Open the Settings application on your phone and tap General Management.

Step 2: Go to Reset > Factory data reset.

Step 3: Swipe to and tap Reset.

Note: Before carrying out a factory reset, you need to input the password of your Vivo V29 Pro Account.

Bonus Tip: Best App To Solve Phone Stuck on Boot Screen

If all the solutions above do not work and you do not want to perform a factory reset on your phone, one option is to use an application called Wondershare Dr.Fone. It is one of the most effective phone recovery solutions and can help to bring your phone back to a state like it was brand new. Being stuck on the startup screen page will be a problem of the past.

The following steps will show you how to use Dr.Fone to perform system repair on your phone.

Step 1: To the Dr.Fone application using the link above and click on System Repair.

Step 2: Depending on the Vivo V29 Pro device you are using, choose either Android or iPhone.

Step 3: In the next window, select the issue you are facing and click Start.

Step 4: Choose the corresponding Brand, Name, Model, Country, and Carrier from each drop-down menu and click Next.

Tip: Make sure the information you input is accurate, as it will affect the system repair if the information is inaccurate.

Step 5: Connect your device to your computer and follow the instructions on the screen to enter Download mode. Click on Next to proceed to the next step.

Step 6: Wait for the process to complete, and a new firmware will be updated on your device. Power on your phone and check if the issue still exists.

Frequently Asked Questions

The following are interesting and frequently asked questions about how to solve boot loops.

1. What is a boot loop?

A boot loop describes a process when Your Vivo V29 Pro stays stuck in a circle of rebooting. When your phone is stuck on the startup screen, one of the strategies you will try is to restart your device. However, when your phone gets stuck in a boot loop, it is your device’s way of trying to turn it off and on again to fix the issue.

Since there is an issue with the booting process, it will keep running into the same error repeatedly, calling the boot loop. When trapped in a boot loop, your device will keep turning off and on. Most boot loop issues are software-related, such as a wrong system update.

2. How do you fix a boot loop?

When stuck in a boot loop, there are different troubleshooting methods for other devices. For Android phones, force your phone into its Recovery mode; from there, you can restore a previous backup. This backup could be from when the boot loop did not exist, so recovery to that backup could quickly solve the problem.

For iPhones, it is the same concept as the Android, restore your phone to the previous backup. You can use iTunes to restore a previously stored backup on your computer.

3. How to prevent a boot loop?

A boot loop typically starts when there is a change to your system before a reboot cycle. Most issues are software-related, such as having to do a system upgrade gone wrong or a problem that doesn’t mesh. One way to prevent this is to perform a software or system upgrade constantly. Make your phone juiced to prevent it from turning off mid-way when updating.

safe & secure

3,405,439 people have downloaded it

Conclusion

This article summarizes some of the possible reasons why your phone is stuck on the boot screen. It demonstrated three useful strategies to overcome your phone stuck in the boot with ease. However, if all the above methods do not work, why not try Dr.Fone-System Repair?

Dr.Fone-System Repair repairs the operating system issues and fixes the issue with your phone. Once you power on your phone again, you can rest assured that it will be like new.

Top 4 Android System Repair Software for Vivo V29 Pro Bricked Devices

Is your Vivo V29 Pro device showing signs of being “bricked” or “soft-bricked”? When a Vivo V29 Pro is bricked, it becomes unresponsive and unusable. But fear not, as this article will guide you through reviving your device’s functionality. It will delve into the significance of unbricking and how it restores usability.

Moreover, this article will introduce you to the world of Vivo V29 Pro unbrick tools and software, ensuring you can get your device back on track. So read on and explore the top Android system repair software that can bring life back to your bricked Vivo V29 Pro device.

Part 1: Understanding Bricked Vivo V29 Pro

Have you ever heard the term “bricked” concerning your Vivo V29 Pro device? This section explains it to you in simple terms. Imagine your device becoming like a brick, unresponsive and seemingly lifeless. That’s what happens when a Vivo V29 Pro gets bricked. There are two main types of brick: soft brick and hard brick.

Soft Brick

Soft brick is like a temporary setback for your device. To see if your Vivo V29 Pro is soft - bricked, check out the details below:

• It happens when the software encounters issues, but the hardware is usually fine.
• Your device might not start properly, freeze, or get stuck on the logo screen.

Hard Brick

Now, this is a more severe situation. In this case, your bricked Vivo V29 Pro might fall under the following conditions:

• Thesoftware and hardware have significant problems, making the Vivo V29 Pro device unresponsive.
• Your device won’t turn on and might not show any signs of life.

Common Causes of a Brick Vivo V29 Pro

Now, let’s discuss why devices end up in this bricked state. It can happen due to a few common reasons:

• Failed Updates

Something might go wrong during the process when you’re trying to update your Vivo V29 Pro device. This is properly because of a poor internet connection or other interruptions. As a result, your device might get confused and end up bricked.

• Custom ROM Installations

A custom ROM is like a customized version of your device’s software. While it can bring cool new features, it can also cause issues if not installed correctly. Incompatible or poorly made custom ROMs can sometimes lead to a bricked device.

• Unauthorized Modifications

If you’re trying to tweak your device’s software without proper knowledge, you might make changes that the Vivo V29 Pro device can’t handle. This can lead to instability and, you guessed it, a bricked device.

So, why is it important to know all this? Well, a bricked device isn’t just frustrating; it can disrupt your daily life. You won’t be able to use your device, access your apps, or even make calls. That’s why unbricking is crucial.

Part 2: Top Android System Repair Software

Now that you’ve grasped the concept, let’s dive into how to unbrick a Vivo V29 Pro. That’s where Android system repair software comes in. These clever programs are like doctors for your device’s software. They diagnose and fix issues to keep your appliance running smoothly. Let’s explore the cream of the crop when it comes to these software solutions:

Wondershare Dr.Fone

Dr.Fone - System Repair (Android) is like a magic wand for your Vivo V29 Pro device. It’s designed to rescue your device from troubles and make it run smoothly again. Dr.Fone - System Repair (Android) is built to  fix various issues, including a bricked device. It can resolve problems like black screens, frozen devices, boot loops, and even devices stuck in recovery mode.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

Key Features

Here’s what Dr.Fone offers as a powerful Android system repair software:

• Repair a wide variety of Android system issues.
• User-friendly interface that’s easy to navigate.
• No technical expertise required – it guides you step by step.
• Compatibility with a wide range of Vivo V29 Pro devices.

Pros

Check out Dr. Fone’s benefits you can take advantage of:

• Easy and intuitive to use.
• Can fix a range of software-related problems.
• Doesn’t require deep technical knowledge.
• Can help you avoid expensive repair services

Cons

As for its drawback, refer below:

• Some complex issues might still require professional help.

How To Unbrick Vivo V29 Pro Using Dr.Fone

This tutorial will show you how Dr.Fone can remove the brick from a Vivo V29 Pro smartphone.

• Step 1: Launch Dr.Fone and head to the program’s left-hand panel, where you’ll find the Toolbox. You may fix your broken Android device by connecting it to your computer and selecting System Repair from the menu.

safe & secure

4,001,177 people have downloaded it

• Step 2: Select Android on the following screen to troubleshoot an Android device. After that, you’ll be brought to a new screen where you can initiate the fix by clicking Start.

• Step 3: When you click through to the next window, the service will automatically recognize the manufacturer of the Android device. Choose the appropriate Brand, Name, Model, Country, and Carrier from the drop-down menus. Select OPEN in the Carrier area if the phone is unlocked. The next step is to tick the box labeled I accept the risk and am ready to continue. Click Next to proceed with the rest of the Vivo V29 Pro device repair.

• Step 4: Put your Vivo V29 Pro into Download Mode when prompted.

• If your phone has a home button, follow the on-screen prompts to power it down. Keep pressing and holding the Volume Down, Home, and Power Then, press the Volume Upbutton to activate the Download Mode.

Click here

• If your Android doesn’t have a Home button, you may still use it byturning it off and pressing the Volume Down, Bixby, and Power buttons simultaneously. Repeatedly pressing the Volume Up button will activate Download Mode.

• Step 5: The firmware download starts on the platform immediately after the Vivo V29 Pro device enters Download Mode. You can click Stop to abort it at any stage during the process. The platform then verifies and presents the information as it downloads. By selecting Fix Now, you can install the firmware.

• Step 6: The Android repair procedure may delete all of your data. To proceed, please type “000000” in the box provided. The system repair process will begin, and its status can be viewed in the next screen’s progress bar.

Take Note: Backing up your Android is necessary before doing any Android repair.

• Step 7: The prompt window will show the completion message. If the Android device boots normally, you can close the tool by clicking the Done button. Press the Try Again button to try powering on the Vivo V29 Pro device again if it does not turn on automatically.

Repair System & Phone Master

This software is a real game-changer in resolving Android system problems. It specializes in repairing system issues, enhancing device performance, and cleaning up unnecessary files.

Key Features

Check out the key features of this software below:

• Repair a range of system issues, including bricking.
• Boost device speed and performance.
• Clean up junk files to free up space.
• The easy-to-use interface is suitable for all users.

Pros

Repair System & Phone Master’s advantages include the following:

• Straightforward operation.
• Focus on improving overall device performance.
• Can potentially extend your device’s lifespan.

Cons

Below is the disadvantage of this software:

• Repair capabilities might be limited for complex issues.

System Repair for Android

True to its name, System Repair for Android is designed to repair and rejuvenate your device’s Android system. It’s a reliable tool to tackle various software issues, including bricked devices.

Key Features

The key features of System Repair for Android app include:

• Repair various Android system problems.
• User-friendly interface for hassle-free operation.

Pros

As for its advantages, see the list below:

• Straightforward solution for commonsystem issues.
• Can save you from device replacement costs.

Cons

Check below to learn about this app’s drawback:

• Advanced issues might require professional intervention.

Phone Doctor Plus

Phone Doctor Plus is like a health check-up app for your device. It’s designed to repair system issues and diagnose hardware problems that might contribute to a bricked device.

Key Features

See Phone Doctor Plus’s essential features below:

• Diagnose and repair both software and hardware issues.
• Identify potential problems that could lead to bricking.

Pros

This app’s advantages include the following:

• Comprehensive diagnosis for both software and hardware.
• Can help you identify issues before they become serious.

Cons

Check out this app’s disadvantages below:

• Not solely focused on software repair, might not cover all scenarios.

Part 3: Tips on Preventing Future Bricking Incidents

Now that you know how to fix a bricked Vivo V29 Pro smartphone, let’s focus on preventing it in the first place. Here are some simple steps you can take to keep your Vivo V29 Pro device safe and sound:

• Regularly Check for Updates

Always keep your device’s software up to date. Updates often contain bug fixes and improvements that can prevent software-related issues.

• Use Reliable Tools and Software

When using any tools or software on your device, ensure they’re trusted and well-reviewed. Unreliable tools can lead to unexpected problems.

• Avoid Unauthorized Modifications

Avoid messing with your device’s software beyond basic settings unless you’re a tech expert. Unauthorized modifications can lead to bricking.

• Keep Your Battery Charged

Ensure your device has enough battery power before initiating software updates or installations. Low battery during critical processes can lead to issues.

• Backup Regularly

Regularly back up your device’s data to avoid losing important information during a bricking incident.

• Use Official Firmware

If you’re ever reinstalling or updating your device’s software, always use official firmware provided by the manufacturer.

• Utilize Safe Mode for Troubleshooting

If your device starts acting strange, try booting it into safe mode. This helps you identify if a third-party app is causing issues.

• Seek Professional Help

If you’re unsure about a particular action, seek help from experts. Trying to fix complex issues yourself can worsen the situation.

By following these easy tips, you can keep your Vivo V29 Pro device running smoothly and avoid the hassle of dealing with a bricked device. Always remember, prevention is better than cure!

safe & secure

Conclusion

Encountering a bricked Vivo V29 Pro device can be a frustrating roadblock. However, there’s a silver lining – the power of an Android system repair software like Dr.Fone – System Repair (Android). This user-friendly tool acts as your device’s superhero, rescuing it from the clutches of bricking incidents.

So, whether your device is experiencing a soft brick or a hard brick, you now have the best tools and knowledge to overcome it. Dive into the Android system repair software world, explore your options, and bid farewell to brick. Welcome a revived, functioning Vivo V29 Pro device into your daily life.

4 Solutions to Fix Unfortunately Your App Has Stopped Error on Vivo V29 Pro

We often find people complaining, “Unfortunately Youtube has stopped”, “Unfortunately the internet has stopped” or “Unfortunately Netalpha has stopped”. An error that causes Apps to randomly stop working is experienced by users daily. This is a strange error as it occurs while you are using an App, and it suddenly stops working or crashes. You are brought back from the App screen to the Home Screen of your device with an error message saying: “Unfortunately, it has stopped working.”

Apps not working or stopped while working, such as unfortunately Netalpha has stopped or unfortunately the internet has stopped, is a very confusing error because one moment your App is running smoothly and the next moment it shuts down automatically with an error message. Unfortunately, Youtube has stopped working, Netalpha has stopped. Unfortunately, the internet has stopped, and many more such examples of Apps stopping while working normally are witnessed by users all over the world, and they are constantly on a lookout for solutions to fix such an error.

Read on to find out why exactly your App stops working suddenly and 3 of the best and most effective ways to tackle the problem.

Part 1: Why your App stops working suddenly?

Unfortunately, Youtube has stopped; unfortunately, Netalpha has stopped working, etc. are error messages that pop-up now and then while using Apps on Android mobile devices. It is important to understand that such errors are not App/Apps specific and may occur to any App/Apps. There is no one specific App or genre of Apps that face this problem.

The reason behind unfortunately internet has stopped or any other App which experiences such a glitch in data crash. A data crash is not a serious problem and only means a situation wherein an App, OS, or software stops working normally and exits abruptly. This may happen due to various reasons such as unstable internet connection, both cellular and WiFi. Another reason for Apps to stop working could be corrupted Cache files, which have not been cleared in a long time.

Many users also feel that incomplete or improper installation may cause the App to crash and stop working suddenly.

There may be many more reasons for them; unfortunately, App has stopped error to show up, but no one reason can be blamed for it.

Therefore it is important for us to carefully examine the problem and choose from the solutions given below to fix Unfortunately, Youtube has stopped; unfortunately, Netalpha has stopped; unfortunately, the internet has stopped and many other similar unfortunately App has stopped working errors.

Part 2: A One-Click Fix to ‘Unfortunately App has Stopped’

Fortunately, while this is an annoying problem that stops you from doing what you’re doing, the best way to eliminate this error is simply to repair the data glitch, thus preventing it from happening.

The easiest solution is to use a software application known as Dr.Fone - System Repair , a specialist piece of programming designed to help you fix your devices as quickly as possible.

If this sounds like the option you need to alleviate your, unfortunately, YouTube has stopped errors; this is how to use it.

How to Use Dr.Fone -Repair to Fix Unfortunately App has Stopped Error

Note: Please note that using this solution may rewrite and repair all data on your phone, meaning there is the potential to lose data during the process. Make sure you back up your device before continuing.

Step #1 - Acquire the Software

Head over to the Dr.Fone - System Repair website and download the software to your Mac or Windows computer.

Step #2 - Connect Your Android Device

Launch Dr.Fone and click the System Repair option from the main menu. Now connect your Vivo V29 Pro using the official cable.

From the next menu, select the ‘Android Repair’ option and press ‘Start’.

Step #3 - Input Information & Repair

Tap in your phone information. This is to make sure your device is repaired correctly while minimizing the risk of bricking your device.

Follow the on-screen instructions on how to then boot your Vivo V29 Pro in Download mode.

Once booted, the software will verify your firmware and start repairing your device. Make sure your phone stays connected throughout the process, and you’ll be ready to go and your ‘unfortunately the internet [or another app] has stopped’ error should be erased!

This could take some time, depending on your internet connection and speeds, so be mindful that everything stays connected.

Part 3: Fix your App has unfortunately stopped by clearing App Cache

Herein we bring to you 3 of the most effective remedies to combat the; unfortunately, App has stopped error, which has helped many users facing similar problems.

First among these is to clear the App’s cache. Clearing App Cache to fix Unfortunately Youtube has stopped, and such errors are very popular as it cleans your App/Apps by wiping off data that has been stored due to constant App usage, and it makes the App/Apps as good as new. It is advised to all users to clear the App cache regularly for Apps to function better.

Follow the steps given below to learn how to clear App cache:

• Visit “Settings”  to find an option named “Apps”.

• Tap on “Apps” and look for the App which has suddenly stopped.

• Click the App name, say, for example, “Youtube” by scrolling down in “All” Apps.

• From the options that appear, tap on “Storage” and then on “Clear cache” as shown below.

Clearing App cache is always a good idea as it prevents any errors which may be caused due to the cache being corrupt or too full. This method is likely to help you, but if the problem persists, read on to find out about 2 more solutions.

Part 4: Fix your App has unfortunately stopped by the fresh installation

Sometimes, unfortunately, Youtube has stopped; unfortunately, the internet has stopped, and such errors are caused due to improper or inappropriate App installation. It is mandatory to completely download the App from the Google Play Store and use it after it is successfully installed on your device.

Firstly, to uninstall all an existing App from your device, follow the instructions given hereunder:

• Visit “Settings” and search for “Application Manager” or “Apps”.

• Select the App you wish to uninstall, say, for example, “Messenger”.

• From the options that appear before you, click on “Uninstall” to delete the App from your device.

You may also uninstall an app directly from the Home Screen (only possible in certain devices) or the Play Store.

To re-install the App, visit Google Play Store, search for the App name and click on “Install”. You will also find the deleted App in “My Apps and games” on your Play store.

This method has helped many and will be useful to you too. So don’t hesitate to try it. It may sound tedious and time-consuming, but it hardly takes 5 minutes of your time.

Part 5: Fix your App has unfortunately stopped by factory reset

Factory Reset must be used only when nothing else works. Please remember to take a back-up of all your data and contents on the cloud or an external memory device, such as a pen drive before adopting this method because the one you perform a factory reset on your device, all media, contents, data and other files are wiped out, including device settings. Do remember to back up the data on an Android device before performing a factory reset.

Follow the step-by-step explanation given below to factory reset your device to fix Unfortunately Youtube has stopped; unfortunately, the internet has stopped working and similar errors:

• Visit “Settings” by clicking the settings icon, as shown below.

• Now select “Backup and Reset” and move on.

• In this step, select “Factory data reset” and then “Reset Device”.

• Finally, tap on “ERASE EVERYTHING” as shown below to Factory Reset your device.

Note: Once the factory reset process is complete, your device will automatically restart and you will have to set it up once again.

Errors such as unfortunately, Youtube has stopped, unfortunately, Netalpha has stopped, unfortunately, the internet has stopped working and so on are very common these days. They disrupt the normal functioning of an App/Apps and prevent you from using the App/Apps smoothly. Unfortunately, App has stopped error is not a serious problem and does not mean there is a problem with the App, your Android OS version, or your handset. It is a random error which occurs due to various reasons in a given situation. If you experience such an error while sign in your favorite App/Apps, DO NOT panic as unfortunately, App has stopped error can be fixed easily. All you need to do is be patient with the App’s software and not try to launch it again and again once it crashes, and an error message pops-up. Just follow the methods listed and explained in detail in the previous segments to solve the problem of unfortunately App has stopped.

Also read: