Stuck at Android System Recovery Of Motorola Razr 40 Ultra ? Fix It Easily

In this article, you will learn what is Android system recovery, and how to fix Android stuck at system recovery step by step. To get out of Android system recovery more easily, you need this Android repair tool.

You know your Motorola Razr 40 Ultra is stuck in recovery mode when you cannot turn on the Motorola Razr 40 Ultra device. If you try to turn it on, it shows a message that says, “Android System Recover.” This situation can be quite debilitating for most Android users. Most of the time, you don’t know whether you have lost all of your important Android data. It is even more worrying because of the fact that you cannot turn on your device at all, especially when you don’t know how to fix it.

Part 1. What is Android System Recovery?

Despite all the worry that surrounds an unwanted Android system recovery screen, it is actually a feature that can be quite helpful to your Motorola Razr 40 Ultra when it’s needed. It can be useful when you want to hard reset the Android device without having to access the settings. This can be very useful if your device is not working very well or if your touch screen is experiencing problems. It can also be very helpful when you are having a problem accessing the settings on your device.

For these reasons, it is actually a good thing, although when it does happen unexpectedly, you may want to know how to fix it.

Part 2. How to get to Android System recovery

Now that you know how useful the Android System can be, you may want to know how to utilize this feature to get out of some of the problems we mentioned above. Here’s how you can safely get to the Android recovery system on your Motorola Razr 40 Ultra.

Step 1: Hold down the power key and then select “Power Off” from the options on the screen. If, however, your screen is unresponsive, keep holding the power key for several seconds until the Motorola Razr 40 Ultra device is completely turned off.

Step 2: Next, you need to hold down the Power and the Volume Key. You should able to see the Android image and a bunch of information about your device. There should also be a “Start” at the top right corner of the screen.

Step 3: Press the Volume up and Volume down keys and use the Power key to select menu options. Press the Volume down key twice to see “Recovery Mode” in red at the top of the screen. Press the Power key to select it.

Step 4: The white Google logo will appear immediately followed by the Android logo again as well as the words “No Command” at the bottom of the screen.

Step 5: Finally, press and hold both the Power and the Volume up Key for around 3 seconds and then let go of the Volume up Key but keep holding the Power Key. You should see the Android system recovery options at the top of the screen. Use the Volume keys to highlight and the Power key to select the one you want.

Part 3. Android Stuck at System Recovery? How to fix in one click?

Sometimes during the System Recovery process, the process can glitch, and you’ll lose data on your device, rendering it unusable. However, another solution to fix this is to repair your device using the Dr.Fone - System Repair tool.

Dr.Fone - System Repair (Android)

One-stop solution to fix Android stuck at System recovery

• It’s the #1 software for PC-based Android repair
• It’s easy to use with no technical experience required
• Supports all latest Motorola Razr 40 Ultra devices
• Easy, one-click fix Android stuck at system recovery

3981454 people have downloaded it

Here’s a step by step guide on how to use it yourself;

Note: Be aware that this process can erase all your personal files on your device, so ensure you’ve backed up your Motorola Razr 40 Ultra before continuing.

Step #1 Head over to the Dr.Fone website and download the software for your Windows computer.

Once installed on your computer, open onto the main menu and connect your Motorola Razr 40 Ultra using the official USB cable. Select the System Repair option.

Step #2 Select the ‘Android Repair’ option from the next screen.

Insert your device information, including the brand, carrier details, model and country and region you’re in to ensure you’re downloading the correct firmware.

Step #3 Follow the onscreen instructions on how to put your device in Download Mode.

Your device should already be in this mode but follow the instructions to make sure. There are methods available for devices, both with and without home buttons.

Step #4 The firmware will now start downloading. You’ll be able to track this process in the window.

Ensure your device, and your computer stays connected the entire time, and make sure your internet connection remains stable.

After downloading, the software will automatically start to repair your device by installing the firmware. Again, you can track the progress of this on the screen, and you’ll need to ensure your device remains connected throughout.

You’ll be notified when the operation is complete and when you’re able to disconnect your phone and use it as normal, free from it being stuck on the Android system recovery screen!

Part 4. Android Stuck at System Recovery? How to fix in a common way?

If, however, your device is stuck on system recovery mode, here’s how you can easily get it out of system recovery. The process is slightly different for different Android devices, so you should check your device’s manual before attempting this process.

Step 1: Power off the Motorola Razr 40 Ultra device, and just to be sure, take out the battery to ensure that the Motorola Razr 40 Ultra device is fully turned off. Then reinsert the battery.

Step 2: Press and hold down the Home button, Power Button, and the Volume up Key simultaneously until the Motorola Razr 40 Ultra device vibrates.

Step 3: Once you feel the vibration, release the power button but continue to hold down the Home and Volume up Key. The Android recovery screen will display. Release the Volume up and Home buttons.

Step 4: Press the Volume down key to select the “Wipe Data/ Factory Reset option and then press the Power button to select it.

Step 5: Next, you need to press the Volume down button to highlight “Delete All User Data” and then press the Power button to select it. The device will reset and present the “Reboot System Now” option.

Step 6: Finally, press the Power button to reboot the phone in normal mode.

Part 5. Backup and Restore Android System

Losing data on your Motorola Razr 40 Ultra is a common occurrence, and since Android devices don’t really have an automatic full backup solution, it is important to know how to backup and restore your device system. Here’s how to easily do that.

Step 1: Enter the recovery mode on your Motorola Razr 40 Ultra, as described in Part 2 above. Use the Volume and Power keys to select the “Backup & Restore” option on the screen.

Step 2: Tap on the backup option or use the Volume and Power keys if your screen is unresponsive. This will begin backing up your system to the SD card.

Step 3: After the process is complete, choose “Reboot” to restart the Motorola Razr 40 Ultra device.

Step 4: You can then simply check Recovery > backup directory on your SD card. You can rename it to easily find it later during the restore process.

To restore the system from the backup created, follow these simple steps.

Step 1: Once again, enter recovery mode as described in part 2 above and then choose Backup & Restore from the menu list.

Step 2: Press “Restore” to begin the recovery process from the Backup file we created

Step 3: You will be notified when the system restore is complete.

Android system recovery mode can be quite useful, especially when your system is unresponsive. As we have also seen, it is important to know how to get into and out of System Recovery mode if you are going to backup and restore your Android system. It is also quite easy to do both of these things.

Motorola Razr 40 Ultra Bootloop Problem, How to Fix it Without Data Loss

Have you, like many other users, faced the bootloop Android problem and wondered what exactly is Android boot loop. Well, Android boot loop is nothing but an error that makes your phone switch on itself every time you manually turn it off. To be precise, when your Motorola Razr 40 Ultra does not remain switched off or powered off and starts to boot up automatically after a few seconds, it might be stuck in the boot loop Android.

An Android boot loop is a very common problem and is one of the first symptoms of a soft-bricked device. Also, when your device is experiencing Android boot loop issue, it does not start normally to reach the Home or Locked Screen and remains frozen at the Motorola Razr 40 Ultra device’s logo, Recovery Mode or a lit-up screen. Many people fear losing their data and other files due to this error and thus, it is a very confusing situation to be in.

We understand the inconvenience caused, therefore, here are ways to tell you how to fix the bootloop problem in Android devices without losing any important data.

However, before moving on, let us learn a little about the causes for the Android boot loop error.

Part 1: What might cause the bootloop issue on Android?

Android boot loop error might seem weird and unexplainable but it occurs because of some specific reasons.

Firstly, please understand that it is a misnomer that boot loop error occurs only in a rooted device. Boot loop Android error can also occur in a stock device with the original software, ROM, and firmware.

In a rooted device, changes made, such as flashing a new ROM or customized firmware which are not compatible with the Motorola Razr 40 Ultra device’s hardware or existing software, can be blamed for the boot loop problem.

Moving on, when your device’s software is unable to communicate with the system files during the start-up process, Android boot loop problem may arise. Such a glitch is caused if you have recently updated the Android version.

Also, corrupt App update files may also cause the bootloop Android issue. Apps and programs downloaded from unknown sources bring in a particular type of virus that prevents you from using your device smoothly.

All-in-all, Android boot loop error is a direct outcome of when you try to tamper with your device’s internal settings.

Hence, if you are looking for ways to guide you about how to fix boot loop issue, you will have to revamp the Motorola Razr 40 Ultra device internally by either resetting it or adopting a recovery method.

Read on to know more about how to fix the bootloop error without any data loss when your device suffers from the bootloop Android problem.

Part 2: One click to Fix Android Bootloop without factory reset

If you are trying to figure out how to fix boot loop, the first option you have is the one-click fix to Android Bootloop which involves using the Dr.Fone - System Repair software.

This is designed to repair any data corruption on your device and restores your firmware to its usual working condition.

Dr.Fone - System Repair (Android)

One click to fix boot loop of Android

• #1 Android repair solution from your PC, can fix a wide range of Android system issues, such as boot loop, black screen, etc.
• The software requires no technical expertise, and anybody can use it
• A one-click solution when learning how to fix Android boot loop
• Not require root Android phones.
• Works with most Motorola Razr 40 Ultra devices, including the latest Motorola Razr 40 Ultra phones like S22
• Simple and easy-to-use user interface

4,689,059 people have downloaded it

To help you get started, here’s a step-by-step guide on how to use Dr.Fone - System Repair.

Note: This method can erase data on your device, including your personal files, so make sure you’ve backed up your device before proceeding.

Step #1 Download the Dr.Fone - System Repair software from the website and install it onto your computer.

Open the software and select the System Repair option from the main menu to fix the Android bootloop error.

Step #2 Connect your Motorola Razr 40 Ultra to your computer using the official cable and select the “Android” option from the three menu items. Click “Start” to confirm.

You’ll then need to input the Motorola Razr 40 Ultra device information, such as your carrier info, device name, model, and country/region in order to ensure you’re downloading and repairing the correct firmware to your phone.

Step #3 Now you’ll need to put your phone into Download Mode to remove the Android bootloop.

For this, you can simply follow the onscreen instructions for both phones with and without home buttons.

Click “Next”, and the software will begin downloading the firmware repair files.

Step #4 Now you can sit back and watch the magic happen!

Make sure your computer stays connected to the internet, and your device stays connected to your computer throughout the entire process. Once the firmware has been downloaded, it will be automatically installed onto your mobile device, removing the boot loop Android error.

You’ll be notified when the process is done and when you can remove your device and start using free from the boot loop Android error!

safe & secure

Part 3: Soft reset to fix Android bootloop issue

When your device is stuck in Android boot loop, it does not necessarily mean that it is bricked. Boot loop might be occurring due to a simpler problem which can be fixed by turning off your device. This sounds like a home remedy for a serious problem but it works and resolves the problem most of the time.

Follow the steps given below to soft reset your device:

Turn the Motorola Razr 40 Ultra device off and take out its battery.

If you cannot take the battery out, let the phone be off for about 3 to 5 minutes, and then turn it back on.

Simply performing a soft reset on your device can help you if you are looking for solutions for how to fix the bootloop issue. This a very useful method as it does not result in any kind of loss in data and protects all your media files, documents, settings, etc.

In case the Motorola Razr 40 Ultra device does not turn on normally and is still stuck in the bootloop Android problem, be prepared to use the troubleshooting techniques given and explained below.

Part 4: Boot into Safe Mode to fix Android boot loop

Booting your Motorola Razr 40 Ultra into Safe Mode is a useful troubleshooting step to fix boot loop issues caused by third-party apps. When in Safe Mode, the Motorola Razr 40 Ultra device will start up with only essential system apps, and any downloaded apps that might be causing conflicts won’t run. Here’s how you can boot your Motorola Razr 40 Ultra into Safe Mode to address the boot loop problem:

Step 1: Power Off Your Device

Hold down the power button until it turns off completely.

Step 2: Access Safe Mode

To enter Safe Mode, follow these steps based on your device model:

• For most Android devices: Press and hold the power button to turn on your device. As soon as the manufacturer’s logo appears, press and hold the Volume Down button until the Motorola Razr 40 Ultra device finishes booting. You should see “Safe Mode” displayed in the bottom left or right corner of the screen.
• Some devices might require slightly different key combinations. Refer to your device’s user manual or perform an online search for the specific method to enter Safe Mode for your model.

Step 3: Observe the Motorola Razr 40 Ultra device

Once your device has booted into Safe Mode, use it for a while to see if the boot loop issue persists. If the boot loop doesn’t occur in Safe Mode, it indicates that the problem is likely caused by a third-party app.

Step 4: Identify and Uninstall Problematic Apps

Now that you’re in Safe Mode, it’s time to identify the troublesome app. Start by uninstalling recently installed apps one by one until the boot loop problem is resolved. After each uninstallation, restart your device normally to check if the boot loop still occurs. Continue this process until you find the problematic app.

Step 5: Restart Normally

Once you’ve identified and uninstalled the problematic app, restart your device normally to exit Safe Mode. Your Android device should now start up without getting stuck in a boot loop.

By following these steps and using Safe Mode to isolate problematic apps, you can effectively troubleshoot and resolve boot loop issues on your Motorola Razr 40 Ultra.

Part 4: Factory reset to fix Android bootloop issue

Factory reset, also known as Hard Reset, is a one-stop solution for all your software resulting in issues. Android boot loop being such problem, can be easily overcome by performing a factory reset.

Please note that all your device’s data and settings will be deleted by adopting this method. However, if you have a Google account signed in on your Motorola Razr 40 Ultra, you will be able to retrieve most of your data once the Motorola Razr 40 Ultra device turns on.

To factory reset your Android boot loop device, you must first boot into the Recovery Mode screen.

To do this:

Press the volume down button and power button together until you see a screen with multiple options before you.

When you are at the Recovery Mode screen, scroll down using the volume down key, and from the options given, select “Factory Reset” using the power key.

Wait for your device to perform the task and then:

Reboot the phone in Recovery Mode by selecting the first option.

This solution is known to fix the boot loop error 9 out of 10 times, but if you still can’t start your Motorola Razr 40 Ultra normally, consider using a CWM Recovery to resolve the Android boot loop issue.

Part 5: Use CWM Recovery to fix bootloop on rooted Android

CWM stands for ClockworkMod and it is a very popular custom recovery system. To use this system to solve the boot loop Android error, your Motorola Razr 40 Ultra must be rooted with CWM Recovery System which basically means CWM must be downloaded and installed on your device.

Furthermore, to use CWM Recovery to fix boot loop on rooted Android devices, follow the steps given below:

Press the home, power, and volume up buttons to launch the CWM Recovery screen.

Note: you might have to use a different combination of keys to enter into Recovery Mode, depending on your device’s model.

Scroll down using” the volume key to select “Advanced”.

Now select “Wipe” and choose to wipe “Dalvik Cache”.

In this step, select “Mounts and Storage” to click on “Wipe” or “Cache”.

Once this is done, make sure to reboot your Motorola Razr 40 Ultra.

This process with successfully fix the Android boot loop error and not cause any loss of data stored on your device stuck in boot loop.

So the bottom line is that boot loop Android issue may seem like an irreparable error but it can be resolved by carefully following the techniques explained above. These methods not only tell you how to fix the bootloop problem but also prevent it from occurring in the future.

An Android boot loop is a common phenomenon with all Android devices because we tend to tamper with our device’s internal settings. Once the ROM, firmware, kernel, etc are damaged or rendered incompatible with the Motorola Razr 40 Ultra device’s software, you cannot expect it to function smoothly, hence, the boot loop error occurs. Since you are not the only one suffering from the Android boot loop problem, be rest assured that the ways, given above, to combat it are recommended by users facing similar troubles. So, don’t hesitate and go ahead to try them on.

safe & secure

11 Proven Solutions to Fix Google Play Store Not Working Issue on Motorola Razr 40 Ultra

Google Play Store is a necessary and bundled service of any Android device. This app is required to download or even run any apps. So, getting an error like Play store not working or Play Store crashing is very unfortunate and a matter of a headache. Here we tried to put the best solution to overcome this issue. Keep reading this article for all the 11 best solutions.

Part 1. The recommended method to fix Google Play Store issues

If you search on the internet, you may find various tricks dealing with Google Play Store not working issue. However, either to try each of them or choose several to follow would certainly cost a lot of time. What’s more, we are not sure whether they will really work. Therefore, we would recommend you with a more effective and fast way, that is to use Dr.Fone - System Repair (Android) , a dedicated Android repair tool to fix Google Play Store, not working issues just in one click.

Dr.Fone - System Repair (Android)

A most effective method to fix Google Play Store not working

• Fix all Android system issues like the black screen of death, won’t turn on, system UI not working, etc.
• Industry’s 1st tool for one-click Android repair.
• Supports all the new Motorola Razr 40 Ultra devices like Galaxy S8, S9, etc.
• Step-by-step instructions provided. No technicals skills required.

3981454 people have downloaded it

Brief steps to guide you through the process of fixing Google Play Store not working (followed by video tutorial):

1. Get this tool downloaded on your computer. Install and launch it, and you can find the following welcome screen displayed.

1. Select the option “System Repair”. In the new interface, click on the “Android Repair” tab.

1. Start fixing Google Play Store not working by clicking “Start”. Select and confirm the correct model details as instructed.

1. Activate the Download mode from your Motorola Razr 40 Ultra.

1. After entering the Download mode, the Dr.Fone tool starts to download the correct firmware to your Android.

1. The downloaded firmware will be loaded and flashed to your Motorola Razr 40 Ultra to fix the Google Play Store not working issue.

1. Wait until the Android repair process is complete. Start your Android and Google Play Store, you can then find that the Google Play Store not working issue no longer exists.

Video tutorial to fix Google Play Store not working

Part 2: Other 10 common methods to fix Google Play Store issues

1. Fix Date and Time settings

Sometimes Google creates a problem connecting with the Play Store or Play store crashing due to the wrong date and time. The first and most common thing is you have to check if the date and time are updated or not. If not, update it first by following the below step by step guide.

Step 1 – First, go to the “Settings” of your device. Find ‘Date and time’ and tap on it.

Step 2 – Now you can see several options. Select “Automatic date and time”. This should override the wrong date and time your device have. Else, deselect the tick beside that option and select the date and time manually.

Step 3 – Now, go to the Play store and try to connect again. This should be working without any problem now.

2. Cleaning of Cache data of Play Store

This may happen that sometimes Google Play Store stopped working due to excessive unnecessary data stored in the cache of the Motorola Razr 40 Ultra device. So, clearing unnecessary data is very important to keep the application run smoothly. To do this, you need to follow the below steps.

Step 1 – Firstly, go to “Settings” on your device.

Step 2 – Now, navigate to the “Apps” option available at the settings menu.

Step 3 – Here you can find the “Google Play Store” app listed. Open it by tapping.

Step 4 – Now, you can find a screen like below. Tap on “Clear cache” to remove all the cache from the application.

Now, again try to open Google Play Store and you may successfully overcome the Play Store not working issue. If not, check the next solution.

3. Reset Play store by Clear data

If the above solution is not working for you, you might try this option instead. This step will erase all the app data, settings, etc so that it can be set up a fresh one. This will also fix the Google Play store not working issue. For this solution, use the following method step by step.

Step 1 – Like the previous method, head towards the settings and then find “Apps”

Step 2 – Now find “Google Play Store” and open it.

Step 3 – Now, instead of tapping “Clear cache”, tap on “Clear data”. This will erase all the data and settings from the Google Play store.

After this, open “Google Play Store” and now your problem might be solved now.

4. Reconnecting the Google account

Sometimes it may happen that removing and reconnecting your Google account may solve the Play Store not working issue. To do this, you need to follow the instructions below.

Step 1 – Go to the “Settings” and then find “Accounts”.

Step 2 – Upon opening the option, select “Google”. Now you can see your Gmail ID listed there. Tap on it.

Step 3 – Now click on the top right side three dots or “more” option. Here you can find the “Remove account” option. Select it to remove the Google Account from your Mobile.

Now, go back and try to open Google Play Store again. This should work now and enter your Google ID and password again to continue. If it’s still not working, move to the next solution.

5. Reinstall the latest version of Google Play Store

Google Play store can’t be uninstalled completed completely from your Motorola Razr 40 Ultra. But disabling and reinstalling its latest version can resolve the Play Store crashing issue. For doing this, just follow the below guide.

Step 1 – First of all, go to “Settings” and then move on to “Security”. Then find “Device administration” here.

Step 2 – Upon clicking on this option, you can find “Android device manager”. Uncheck this and disable.

Step 3 – Now you can be able to uninstall Google play service by going into application manager.

Step 4 – After that, try to open any app that requires Google Play store to open, and that will automatically guide you to install the Google Play service. Now install the updated version of the Google Play service.

After installing, your problem might be solved by now. If not, try the next solution.

6. Clear Google Service Framework Cache

Besides the Google Play store, this is important to keep healthy the Google Service Framework as well. The cache and unnecessary data should be removed from there also. Follow the steps below.

Step 1 – Go to settings and then tap on “Application Manager”

Step 2 – Here you can find “Google Service Framework”. Open it.

Step 3 – Now, tap on “Clear cache”. And you are done.

Now go back and try to open Google Play store again. This might solve the Google Play Store has stopped the problem by now. If not, check the next solution.

7. Disable the VPN

The VPN is a service to get all the media outside your geographic location. This is also used to install a country-specific app in another country. But sometimes it can create a problem with Play Store crashing.  So, this is recommended to try disabling the VPN.

Step 1 – Go to the settings of your device.

Step 2 – Under the “networks”, click on “More”.

Step 3 – Here you can find “VPN”.  Tap on it and turn it off.

Now, again go back and try to open the Google Play Store. This may solve your problem now. If not, check the next solution.

8. Force stop Google Play Service

Google Play Store needs to be restart just like your PC. This is a really helpful and common trick to overcome the Play Store crashing issue on your Motorola Razr 40 Ultra. To do this, follow the below steps.

Step 1- Go to settings and then go to the “Application Manager”.

Step 2 – Now find “Google Play Store” and click on it.

Step 3 – Here click on “Force Stop”. This allows the Google Play Store to stop.

Now, try to open Google Play store again and this time the service is being restarted and might work properly. If not, try the next solution.

9. Try a Soft Reset of your device

This easy to use solution will remove all the unnecessary temporary files of your device, close all recent apps, and make it clean. This is just rebooting your device. It won’t delete any data from your device.

Step 1 – Long press the “Power” button on your device.

Step 2 – Now, click on ‘Reboot’ or ‘Restart’ option. Your device will restart in some time.

After restarting, try to open the Google Play Store again and this time you should succeed. If any case, it’s not opening, try the last (but not the least) method by hard reset your Android.

10. Hard reset your device

If you have done with all of the above solutions and still Play Store crashing, and you are aggressive to get it, then only try this method. Using this method will delete all the data of your device. So take a backup of the whole. Follow the step by step instruction below.

Step 1 – Go to setting and find “backup and reset” there.

Step 2 – Click on it. And then Click on the “Factory data reset” option.

Step 3 – Now confirm your action and tap on the “Reset device”.

This will take a while to reset your device completely. After completion, start the Google Play Store and set up as a new device.

The above methods are the best 11 among all the solutions you can get for your Play Store not working on wifi or Play Store crashing error. Try one by one and you might get rid of this problem.

Also read: