Stuck at Android System Recovery Of Tecno Spark 10 5G ? Fix It Easily

In this article, you will learn what is Android system recovery, and how to fix Android stuck at system recovery step by step. To get out of Android system recovery more easily, you need this Android repair tool.

You know your Tecno Spark 10 5G is stuck in recovery mode when you cannot turn on the Tecno Spark 10 5G device. If you try to turn it on, it shows a message that says, “Android System Recover.” This situation can be quite debilitating for most Android users. Most of the time, you don’t know whether you have lost all of your important Android data. It is even more worrying because of the fact that you cannot turn on your device at all, especially when you don’t know how to fix it.

Part 1. What is Android System Recovery?

Despite all the worry that surrounds an unwanted Android system recovery screen, it is actually a feature that can be quite helpful to your Tecno Spark 10 5G when it’s needed. It can be useful when you want to hard reset the Android device without having to access the settings. This can be very useful if your device is not working very well or if your touch screen is experiencing problems. It can also be very helpful when you are having a problem accessing the settings on your device.

For these reasons, it is actually a good thing, although when it does happen unexpectedly, you may want to know how to fix it.

Click here

## Part 2. How to get to Android System recovery

Now that you know how useful the Android System can be, you may want to know how to utilize this feature to get out of some of the problems we mentioned above. Here’s how you can safely get to the Android recovery system on your Tecno Spark 10 5G.

Step 1: Hold down the power key and then select “Power Off” from the options on the screen. If, however, your screen is unresponsive, keep holding the power key for several seconds until the Tecno Spark 10 5G device is completely turned off.

Step 2: Next, you need to hold down the Power and the Volume Key. You should able to see the Android image and a bunch of information about your device. There should also be a “Start” at the top right corner of the screen.

Step 3: Press the Volume up and Volume down keys and use the Power key to select menu options. Press the Volume down key twice to see “Recovery Mode” in red at the top of the screen. Press the Power key to select it.

Step 4: The white Google logo will appear immediately followed by the Android logo again as well as the words “No Command” at the bottom of the screen.

Step 5: Finally, press and hold both the Power and the Volume up Key for around 3 seconds and then let go of the Volume up Key but keep holding the Power Key. You should see the Android system recovery options at the top of the screen. Use the Volume keys to highlight and the Power key to select the one you want.

Part 3. Android Stuck at System Recovery? How to fix in one click?

Sometimes during the System Recovery process, the process can glitch, and you’ll lose data on your device, rendering it unusable. However, another solution to fix this is to repair your device using the Dr.Fone - System Repair tool.

Dr.Fone - System Repair (Android)

One-stop solution to fix Android stuck at System recovery

• It’s the #1 software for PC-based Android repair
• It’s easy to use with no technical experience required
• Supports all latest Tecno Spark 10 5G devices
• Easy, one-click fix Android stuck at system recovery

3981454 people have downloaded it

Here’s a step by step guide on how to use it yourself;

Note: Be aware that this process can erase all your personal files on your device, so ensure you’ve backed up your Tecno Spark 10 5G before continuing.

Step #1 Head over to the Dr.Fone website and download the software for your Windows computer.

Once installed on your computer, open onto the main menu and connect your Tecno Spark 10 5G using the official USB cable. Select the System Repair option.

Step #2 Select the ‘Android Repair’ option from the next screen.

Insert your device information, including the brand, carrier details, model and country and region you’re in to ensure you’re downloading the correct firmware.

Allavsoft Batch Download Online Videos, Music Offline to MP4, MP3, MOV, etc format

Step #3 Follow the onscreen instructions on how to put your device in Download Mode.

Your device should already be in this mode but follow the instructions to make sure. There are methods available for devices, both with and without home buttons.

Step #4 The firmware will now start downloading. You’ll be able to track this process in the window.

Ensure your device, and your computer stays connected the entire time, and make sure your internet connection remains stable.

KoolReport Pro is an advanced solution for creating data reports and dashboards in PHP. Equipped with all extended packages , KoolReport Pro is able to connect to various datasources, perform advanced data analysis, construct stunning charts and graphs and export your beautiful work to PDF, Excel, JPG or other formats. Plus, it includes powerful built-in reports such as pivot report and drill-down report which will save your time in building ones.

It will help you to write dynamic data reports easily, to construct intuitive dashboards or to build a whole business intelligence cockpit.

KoolReport Pro package goes with Full Source Code, Royal Free, ONE (1) Year Priority Support, ONE (1) Year Free Upgrade and 30-Days Money Back Guarantee.

Developer License allows Single Developer to create Unlimited Reports, deploy on Unlimited Servers and able deliver the work to Unlimited Clients.

After downloading, the software will automatically start to repair your device by installing the firmware. Again, you can track the progress of this on the screen, and you’ll need to ensure your device remains connected throughout.

You’ll be notified when the operation is complete and when you’re able to disconnect your phone and use it as normal, free from it being stuck on the Android system recovery screen!

vMix HD - Software based live production. vMix HD includes everything in vMix Basic HD plus 1000 inputs, Video List, 4 Overlay Channels, and 1 vMix Call
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

Part 4. Android Stuck at System Recovery? How to fix in a common way?

If, however, your device is stuck on system recovery mode, here’s how you can easily get it out of system recovery. The process is slightly different for different Android devices, so you should check your device’s manual before attempting this process.

Step 1: Power off the Tecno Spark 10 5G device, and just to be sure, take out the battery to ensure that the Tecno Spark 10 5G device is fully turned off. Then reinsert the battery.

Step 2: Press and hold down the Home button, Power Button, and the Volume up Key simultaneously until the Tecno Spark 10 5G device vibrates.

Step 3: Once you feel the vibration, release the power button but continue to hold down the Home and Volume up Key. The Android recovery screen will display. Release the Volume up and Home buttons.

Step 4: Press the Volume down key to select the “Wipe Data/ Factory Reset option and then press the Power button to select it.

Step 5: Next, you need to press the Volume down button to highlight “Delete All User Data” and then press the Power button to select it. The device will reset and present the “Reboot System Now” option.

Step 6: Finally, press the Power button to reboot the phone in normal mode.

Part 5. Backup and Restore Android System

Losing data on your Tecno Spark 10 5G is a common occurrence, and since Android devices don’t really have an automatic full backup solution, it is important to know how to backup and restore your device system. Here’s how to easily do that.

Step 1: Enter the recovery mode on your Tecno Spark 10 5G, as described in Part 2 above. Use the Volume and Power keys to select the “Backup & Restore” option on the screen.

Step 2: Tap on the backup option or use the Volume and Power keys if your screen is unresponsive. This will begin backing up your system to the SD card.

Step 3: After the process is complete, choose “Reboot” to restart the Tecno Spark 10 5G device.

Step 4: You can then simply check Recovery > backup directory on your SD card. You can rename it to easily find it later during the restore process.

To restore the system from the backup created, follow these simple steps.

Step 1: Once again, enter recovery mode as described in part 2 above and then choose Backup & Restore from the menu list.

Step 2: Press “Restore” to begin the recovery process from the Backup file we created

Step 3: You will be notified when the system restore is complete.

Android system recovery mode can be quite useful, especially when your system is unresponsive. As we have also seen, it is important to know how to get into and out of System Recovery mode if you are going to backup and restore your Android system. It is also quite easy to do both of these things.

How To Fix Unresponsive Touch Screen on Tecno Spark 10 5G

With the increase in our reliance on smartphones, having touchscreen problems on your device can be annoying. Sometimes, it’s even more frustrating than a physically broken screen because you don’t know where the issue is coming from.

If your touchscreen is malfunctioning or doesn’t work correctly, you cannot interact with your device. On this page, you’ll learn general phone touch problems on Android and how to get rid of them. Now explore the article to learn more.

Part 1: Why Is My Android Experiencing Touch Screen Problems

Below are some of the most common reasons you’re experiencing touch problems on your Android smartphone.

• The touchscreen problemfreezes your phone, lags, or hangs.
• Some parts of the screen work fine, but some don’t.
• Your screen responds inaccurately (typing “a” gets you “q” or “z”).
• The touchscreen is automatically operating itself, resulting in ghost touch.
• It doesn’t respond to any taps, and the phone’s screen has stopped working.
• The device is physically damaged, or the screen is cracked or broken.
• Outdated devices are prone to the black/white/blue screen of death.

Part 2: Tips, Fixes, and Workarounds To Fix Your Tecno Spark 10 5G Touch Problems

If any of the outlined reasons above are the cause of your touch screen malfunctioning, here are some solutions to fix it.

Method 1: Remove the Screen Protector and Phone Case

Some phone cases and screen protectors cause touch problems on your Android screen. This issue is prevalent if you recently changed your phone case or screen protector. It may be due to incompatibility, but you should remove them to see if your phone starts responding again.

Method 2: Clean Your Android Smartphone

A touchscreen malfunctioning can also be a sign of a dirty display. Since the screen relies on contact between your fingers and the touchpad to perform actions, this also applies to foreign particles such as dirt, debris, smudges, oil, and more. Clean your touchscreen with wipes or a soft cloth by gently wiping over the screen.

FX PRO (Gold Robot + Silver Robot(Basic Package))

Method 3: Stop Using Your Android Device for a While

Touch problems also arise due to abnormal temperature changes. Your phone might experience ghost touch if it’s too cold or hot. For your screen to function correctly, it needs to be in a temperate environment. Remember to take breaks between phone usage, especially when the phone gets too hot. Avoid using your device under hot conditions, direct sunlight, or anything affecting your phone’s normal temperature.

Method 4: Restart Your Android

Performing a reboot sounds trivial with such a complicated issue. But sometimes, it’s often the most successful way to fix a touchscreen problem on an Android device. Restarting your Android shuts down and resets all background services, which may have led to your issue.

To restart your Android, press and hold the Power button for several seconds to switch off your phone. In other smartphones, you may need to hold down the Power button as well as the Volume Down button at the same time.

Method 5: Factory Data Reset Your Android

Before attempting to have your device checked for any hardware defects, you should try completing a Factory Reset. To do this, go to Settings > Backup and Reset. Next, tap on Factory data reset > Delete all.

DLNow Video Downloader

Performing a Factory Data Reset will erase all your data and restore your device to its factory default settings. Creating a backup before doing this step is recommended, as you will lose all your personal data once the process starts.

Method 6: Put Your Android into Recovery Mode

If all else fails, placing your Android into Recovery Mode should be a last resort. Doing this method works similarly to the method above. You should perform this method if the screen is unresponsive and only the buttons on your Android are functional. Here’s how.

Note

Placing your Android into Recovery Mode is different depending on your Android smartphone. Refer to your owner’s manual to see which method is right for your Tecno Spark 10 5G.

Step 1A: Press and hold the Power button and Volume Down buttons at the same time. Continue holding both buttons until the screen starts.

Step 1B: If your Tecno Spark 10 5G still has a Home button, press and hold the Home button and the Power button at the same time. Continue holding them until the screen starts.

Step 1C: If step 1A did not put your Android into Recovery Mode, press and hold the Power and Volume Up and Down buttons simultaneously. Continue pressing all three until the screen starts.

Step 2: Use the Volume buttons to navigate the choices, select Wipe data/factory reset, and confirm your choice with the Power button.

Step 3: Wait for the process to complete and for your Tecno Spark 10 5G to restart automatically.

Epubor Ultimate for Win：Helps you read books anywhere, including the best eBook Converter + eBook DRM Removal functions.

Method 7: Replace Your Android Touchscreen

If doing all the earlier workarounds and fixes couldn’t resolve the touchscreen problem, it could be the screen itself. While replacing the touchscreen yourself is possible if you have the technical know-how, it’s still best to bring it to a professional to prevent further damage. You should have your Tecno Spark 10 5G checked by a technician if the screen is getting weak, has water damage, or has failing screen components.

“

Method 8: Bring it to an Authorized Service Center

Your phone touch problem might not be caused by the screen, even when you had it replaced. If your Android is still unresponsive, it’s best to bring your smartphone to an authorized service center or directly to the phone manufacturer, especially when all efforts are exhausted.

Part 3: How To Fix Android Touch Problem With an Alternative

If all the general phone touch problems on your Tecno Spark 10 5G persist, you should strongly consider Wondershare Dr.Fone to do the job. The program can fix all Android system issues without any required skills. Problems caused by the operating system or software, such as the black screen of death, boot loop, ghost touch, and more, are done within less than 10 minutes with the program.

Epubor Audible Converter for Mac： Download and convert Audible AAXC/AA/AAX to MP3 with 100% original quality preserved.

Key Features

Dr.Fone – System Repair (Android) has many features you can immediately take advantage of. Here are some of them below.

• Fix All Android Problems In Minutes

Wondershare Dr.Fone allows you to fix all touchscreen problems on your smartphone within less than 10 minutes. Moreover, it has a high success rate making it one of the most reliable tools available today.

• Supports up to 1000+ Android Models

The program supports almost all Tecno Spark 10 5G models and other Android devices, whether unlocked or from a carrier. Dr.Fone is equipped with all the proper firmware to flash your Tecno Spark 10 5G with just a few clicks. In addition, it has handy on-screen instructions to help you complete the whole process with ease.

Pros and Cons

Here are the pros and cons of using Dr.Fone – System Repair (Android) to know if you’re still undecided.

Pros

• The user interface is clutter-free, making it highly beginner-friendly.
• The fast processing time to fix your Tecno Spark 10 5G means you can do more in less time.

Cons

• The free version only works until you see if your Tecno Spark 10 5G is compatible with the app. You will be required to enter a valid license once you initiate the repair process.
• If you own an iOS device, you’ll have to get the iOS version.

Glarysoft File Recovery Pro Annually - Helps to recover your lost file/data, even permanently deleted data.

How To Fix Black Phone Screen With Wondershare Dr.Fone

Follow the step-by-step guide below to start fixing general phone screen problems on Android using Wondershare Dr.Fone.

Step 1: Download and install Wondershare Dr.Fone on your computer. Next, launch the program and connect your Tecno Spark 10 5G to your computer.

Step 2: Click Start to initiate the setup on a new window. From there, select the Brand, Name, Model, Country, and Carrier of your Tecno Spark 10 5G and click Next.

Step 3: Follow the on-screen instructions on the main program window to initiate the repair process. After that, wait for your Android smartphone to return to its original state.

vMix Pro - Software based live production. vMix Pro includes everything in vMix 4K plus 8 channels of Replay and 8 vMix Call
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

Part 4: FAQs

Here are some FAQs you should remember when experiencing phone touch problems.

1. Does a Cracked Screen Affect Touch on an Android?

If you continue using a smartphone with a cracked screen, there are several implications. Your device will be vulnerable to further damage and might develop touchscreen problems,and your sensors will gradually begin to malfunction. The capabilities of your device are also compromised the longer you delay repairing it. Moreover, a cracked screen can put your fingers at risk of injury due to potential glass splinters.

2. How Do I Temporarily Fix a Cracked Screen?

If you can’t take your cracked screen to a repair shop, apply a small amount of vegetable oil or petroleum jelly to the screen. Doing this will not fix the issue but will make the cracks less noticeable. On the other hand, you can also apply a screen protector to safeguard your phone against further damage. The screen protector slows down or prevents the cracks from getting worse.

3. Can I Use Dr.Fone for Free?

You can download and install Dr.Fone – System Repair (iOS) or (Android) for free to evaluate the program’s offerings. You can do the first few steps to see if the app supports your device. However, you need to get the full version and enter a valid license code to repair your smartphone.

safe & secure

4,471,551 people have downloaded it

Conclusion

If the touchscreen is malfunctioning on your smartphone, one of the fixes above should help solve the problem. If it did not solve the issue, consider using Dr. Fone – System Repair for iOS or Android when you need an all-in-one solution to all your phone screen problems.

However, if your screen is broken or cracked, going to an authorized service center is still your best bet, especially when your screen urgently needs a replacement. Delaying it further may hurt your wallet in the long run, so it’s best to fix it as soon as possible.

Super Easy Ways To Deal with Tecno Spark 10 5G Unresponsive Screen

The evolution of smartphones signifies the development of mobile communication technology. Different from the initial years, they are not just used for messaging and calling but have many other applications. Tecno Spark 10 5G cell phones are presently utilized for perusing the Internet and exploring through maps, photography, videography, and numerous other used cases. A development in arranged availability goes hand-in-hand with the development of cell phones.

Tecno Spark 10 5G smartphones are gaining popularity owing to their low costs, high quality, and innovative features. High-resolution cameras, extensive battery life, and lightning-fast processing are just a few of the advantages of these mobile devices. Nevertheless, customers may sometimes need help with issues, such as a non-functioning Tecno Spark 10 5G touchscreen, which may be challenging.

Some common issues might arise for Tecno Spark 10 5G phone users. The Redmi note 4 touch not working is a serious problem. It can only go up to the initialization screen. In this guide, you’ll find the information you need to troubleshoot and fix the most common problems reported by Motorola customers.

What causes a Tecno Spark 10 5G Screen to be unresponsive?

The screen on your Tecno Spark 10 5G phone could stop responding for several reasons. The touchscreen, the system software, or the hardware itself might all be at fault. To effectively address an issue, it is crucial to locate its origins.

The following are some potential reasons for an unresponsive screen on a Tecno Spark 10 5G device, along with descriptions of each.

There are signs of soft bricking

A touch screen not working on Tecno Spark 10 5G smartphones indicates a soft brick (recoverable by firmware update), often caused by a defective or undercharged battery. System file corruption, old firmware, or failed upgrades are all possible causes. Several customers have complained that after installing a software update, their Tecno Spark 10 5G 4 or 5 device’s screen became unresponsive and remained at the boot logo.

There might be issues with the Tecno Spark 10 5G device itself

Screens on Tecno Spark 10 5G devices may become unresponsive for a variety of hardware-related reasons. A broken LCD panel, faulty touch sensor, or loosened ribbon wires are all possible causes. Every Tecno Spark 10 5G device, including the Note 4 and 5, is susceptible to these problems.

There might be errors in the updated software

The Android operating system is adjustable. Some of our technological advancements may backfire on us. The phone won’t power on or become stuck in a boot loop where the logo will only show intermittently. For example, some Tecno Spark 10 5G 4 and 5 users have reported their screens are unresponsive after a software update, rendering the Tecno Spark 10 5G device unusable.

The common solutions to solve a Tecno Spark 10 5G Screen unresponsive

Could anything be more annoying than a broken touchscreen on your Tecno Spark 10 5G phone? If this happens, the gadget is useless, and you won’t be able to do even the simplest tasks. Even so, it’s common for the screen to cease responding to touches.

Before taking the item in for repairs, see if you can figure out the problem independently. Do you want to learn the method? If the touch screens on your Tecno Spark 10 5G stop working, don’t panic; we’ll teach you exactly what to do.

Solution 1: Try to restart your device

Giving your Tecno Spark 10 5G a restart is one of the most common solutions if you encounter an unresponsive screen on your phone. Here’s how.

Step 1: Press and hold the power button until the screen becomes black;

Step 2: After 1 minute or so, hold the power button again to power on the Tecno Spark 10 5G device.

Solution 2: Check your charging port and battery

If the battery of your Tecno Spark 10 5G is empty, your screen is expected to be unresponsive. To fix that, here are some easy steps for you:

1. Charge your phone.
2. Leave it for about an hour.
3. Come back to check. Turn your phone on.
4. Test if the touchscreen is now working.

Solution 3: Contact Customer Service

Let’s assume you’ve applied every possible course of action. For example, your Tecno Spark 10 5G 4 touchscreen is still unresponsive. You may contact the brand’s customer support department if you need assistance. When the time comes, they’ll always know what to do.

Based on the customer’s feedback, one of the frequent issues of the Tecno Spark 10 5G is when the screen becomes unresponsive. These issues should not usually happen, but if you find yourself in this dilemma, a list of other solutions below will help you.

WonderFox DVD Ripper Pro

Solution 4: Turning on your full screen option offered by MI

Steps to activate full screen gestures

Step 1: Browse you setting

Step 2: Search for full screen display

Step 3: From here, tap the screenshot on the right with the toggle labeled Full screen gestures

This may include gestures to get used to but it will also fix when your touchscreen sometimes stops responding.

Solution 5: Backup and Factory Reset is always a choice

Doing a factory reset may be your last remaining choice if the preceding solutions are unsuccessful. If you do this, all of the information on your phone will be deleted.

Easy Steps in Doing a Factory Reset

1. Press the power button until the phone shuts down
2. When your phone shuts down, press and hold the power buttonand Volume down button at the same time until the Android logo displays on the screen.
3. Recovery Menuwill appear in your screen, press volume down button until Factory reset is highlighted
4. Press thepower button in selecting the Factory reset option and your phone should restart automatically.

Solution 6: Using Dr. Fone Android Repair Toolkit

If you want to fix issues like this, most simply, Dr. Fone offers that. It is made to provide you with a complete mobile solution. You may have your phone fixed without losing any information. Dr. Fone’s many handy tools will quickly get your phone back in working order.

How to avoid a Tecno Spark 10 5G screen unresponsive?

Users may take several precautions to avoid the Tecno Spark 10 5G screen unresponsive problem. Stop using any app stores or other unofficial app providers. There is a risk that doing so may damage your device or introduce viruses that will force your phone to restart. There’s also a risk of losing important information like photos and files.

Regularly updating the Tecno Spark 10 5G phone’s software is necessary to keep it running smoothly and free of issues. Tools like Dr. Fone allow users to periodically maintain and restore data by cleaning the cache and deleting unused applications.

Avoiding severe temperatures and humidity may protect the Tecno Spark 10 5G device’s internal components and keep the screen responsive. Using high-quality charging cords is also recommended. For once, consumers won’t have to worry about breaking the screen because they accidentally dropped their cell phones. If users follow these measures, they may reduce the likelihood that their Tecno Spark 10 5G smartphone will have an unresponsive screen.

safe & secure

Conclusion

Sometimes, Tecno Spark 10 5G smartphones may experience problems with their screen. This occurs if there is an issue with the functioning of a new app or a software update. Several Tecno Spark 10 5G phone owners have reported problems with an unresponsive screen. However, the remedies outlined here should help you quickly and efficiently fix the issue and get your phone back up and running. Keep your phone updated, and remember to back up your data often to avoid this problem in the future.

When following the directions, the user may require more research into some troubleshooting techniques. If this is the case, Dr.Fone Repair is usually the solution. The fact that Dr. Fone can continually tweak his system of unresponsive screens is wonderful news. This helpful tool can fix both black screens and endless starting cycles. That’s why it’s an integral part of every modern computer.