Super Easy Ways To Deal with OnePlus Nord N30 SE Unresponsive Screen

The evolution of smartphones signifies the development of mobile communication technology. Different from the initial years, they are not just used for messaging and calling but have many other applications. OnePlus Nord N30 SE cell phones are presently utilized for perusing the Internet and exploring through maps, photography, videography, and numerous other used cases. A development in arranged availability goes hand-in-hand with the development of cell phones.

OnePlus Nord N30 SE smartphones are gaining popularity owing to their low costs, high quality, and innovative features. High-resolution cameras, extensive battery life, and lightning-fast processing are just a few of the advantages of these mobile devices. Nevertheless, customers may sometimes need help with issues, such as a non-functioning OnePlus Nord N30 SE touchscreen, which may be challenging.

Some common issues might arise for OnePlus Nord N30 SE phone users. The Redmi note 4 touch not working is a serious problem. It can only go up to the initialization screen. In this guide, you’ll find the information you need to troubleshoot and fix the most common problems reported by Motorola customers.

What causes a OnePlus Nord N30 SE Screen to be unresponsive?

The screen on your OnePlus Nord N30 SE phone could stop responding for several reasons. The touchscreen, the system software, or the hardware itself might all be at fault. To effectively address an issue, it is crucial to locate its origins.

The following are some potential reasons for an unresponsive screen on a OnePlus Nord N30 SE device, along with descriptions of each.

There are signs of soft bricking

A touch screen not working on OnePlus Nord N30 SE smartphones indicates a soft brick (recoverable by firmware update), often caused by a defective or undercharged battery. System file corruption, old firmware, or failed upgrades are all possible causes. Several customers have complained that after installing a software update, their OnePlus Nord N30 SE 4 or 5 device’s screen became unresponsive and remained at the boot logo.

There might be issues with the OnePlus Nord N30 SE device itself

Screens on OnePlus Nord N30 SE devices may become unresponsive for a variety of hardware-related reasons. A broken LCD panel, faulty touch sensor, or loosened ribbon wires are all possible causes. Every OnePlus Nord N30 SE device, including the Note 4 and 5, is susceptible to these problems.

There might be errors in the updated software

The Android operating system is adjustable. Some of our technological advancements may backfire on us. The phone won’t power on or become stuck in a boot loop where the logo will only show intermittently. For example, some OnePlus Nord N30 SE 4 and 5 users have reported their screens are unresponsive after a software update, rendering the OnePlus Nord N30 SE device unusable.

The common solutions to solve a OnePlus Nord N30 SE Screen unresponsive

Could anything be more annoying than a broken touchscreen on your OnePlus Nord N30 SE phone? If this happens, the gadget is useless, and you won’t be able to do even the simplest tasks. Even so, it’s common for the screen to cease responding to touches.

Before taking the item in for repairs, see if you can figure out the problem independently. Do you want to learn the method? If the touch screens on your OnePlus Nord N30 SE stop working, don’t panic; we’ll teach you exactly what to do.

Solution 1: Try to restart your device

Giving your OnePlus Nord N30 SE a restart is one of the most common solutions if you encounter an unresponsive screen on your phone. Here’s how.

Step 1: Press and hold the power button until the screen becomes black;

Step 2: After 1 minute or so, hold the power button again to power on the OnePlus Nord N30 SE device.

Solution 2: Check your charging port and battery

If the battery of your OnePlus Nord N30 SE is empty, your screen is expected to be unresponsive. To fix that, here are some easy steps for you:

1. Charge your phone.
2. Leave it for about an hour.
3. Come back to check. Turn your phone on.
4. Test if the touchscreen is now working.

Solution 3: Contact Customer Service

Let’s assume you’ve applied every possible course of action. For example, your OnePlus Nord N30 SE 4 touchscreen is still unresponsive. You may contact the brand’s customer support department if you need assistance. When the time comes, they’ll always know what to do.

Based on the customer’s feedback, one of the frequent issues of the OnePlus Nord N30 SE is when the screen becomes unresponsive. These issues should not usually happen, but if you find yourself in this dilemma, a list of other solutions below will help you.

Solution 4: Turning on your full screen option offered by MI

Steps to activate full screen gestures

Step 1: Browse you setting

Step 2: Search for full screen display

Step 3: From here, tap the screenshot on the right with the toggle labeled Full screen gestures

This may include gestures to get used to but it will also fix when your touchscreen sometimes stops responding.

Solution 5: Backup and Factory Reset is always a choice

Doing a factory reset may be your last remaining choice if the preceding solutions are unsuccessful. If you do this, all of the information on your phone will be deleted.

Easy Steps in Doing a Factory Reset

1. Press the power button until the phone shuts down
2. When your phone shuts down, press and hold the power buttonand Volume down button at the same time until the Android logo displays on the screen.
3. Recovery Menuwill appear in your screen, press volume down button until Factory reset is highlighted
4. Press thepower button in selecting the Factory reset option and your phone should restart automatically.

Solution 6: Using Dr. Fone Android Repair Toolkit

If you want to fix issues like this, most simply, Dr. Fone offers that. It is made to provide you with a complete mobile solution. You may have your phone fixed without losing any information. Dr. Fone’s many handy tools will quickly get your phone back in working order.

How to avoid a OnePlus Nord N30 SE screen unresponsive?

Users may take several precautions to avoid the OnePlus Nord N30 SE screen unresponsive problem. Stop using any app stores or other unofficial app providers. There is a risk that doing so may damage your device or introduce viruses that will force your phone to restart. There’s also a risk of losing important information like photos and files.

Regularly updating the OnePlus Nord N30 SE phone’s software is necessary to keep it running smoothly and free of issues. Tools like Dr. Fone allow users to periodically maintain and restore data by cleaning the cache and deleting unused applications.

Avoiding severe temperatures and humidity may protect the OnePlus Nord N30 SE device’s internal components and keep the screen responsive. Using high-quality charging cords is also recommended. For once, consumers won’t have to worry about breaking the screen because they accidentally dropped their cell phones. If users follow these measures, they may reduce the likelihood that their OnePlus Nord N30 SE smartphone will have an unresponsive screen.

safe & secure

Conclusion

Sometimes, OnePlus Nord N30 SE smartphones may experience problems with their screen. This occurs if there is an issue with the functioning of a new app or a software update. Several OnePlus Nord N30 SE phone owners have reported problems with an unresponsive screen. However, the remedies outlined here should help you quickly and efficiently fix the issue and get your phone back up and running. Keep your phone updated, and remember to back up your data often to avoid this problem in the future.

When following the directions, the user may require more research into some troubleshooting techniques. If this is the case, Dr.Fone Repair is usually the solution. The fact that Dr. Fone can continually tweak his system of unresponsive screens is wonderful news. This helpful tool can fix both black screens and endless starting cycles. That’s why it’s an integral part of every modern computer.

Stuck at Android System Recovery Of OnePlus Nord N30 SE ? Fix It Easily

In this article, you will learn what is Android system recovery, and how to fix Android stuck at system recovery step by step. To get out of Android system recovery more easily, you need this Android repair tool.

You know your OnePlus Nord N30 SE is stuck in recovery mode when you cannot turn on the OnePlus Nord N30 SE device. If you try to turn it on, it shows a message that says, “Android System Recover.” This situation can be quite debilitating for most Android users. Most of the time, you don’t know whether you have lost all of your important Android data. It is even more worrying because of the fact that you cannot turn on your device at all, especially when you don’t know how to fix it.

Part 1. What is Android System Recovery?

Despite all the worry that surrounds an unwanted Android system recovery screen, it is actually a feature that can be quite helpful to your OnePlus Nord N30 SE when it’s needed. It can be useful when you want to hard reset the Android device without having to access the settings. This can be very useful if your device is not working very well or if your touch screen is experiencing problems. It can also be very helpful when you are having a problem accessing the settings on your device.

For these reasons, it is actually a good thing, although when it does happen unexpectedly, you may want to know how to fix it.

Part 2. How to get to Android System recovery

Now that you know how useful the Android System can be, you may want to know how to utilize this feature to get out of some of the problems we mentioned above. Here’s how you can safely get to the Android recovery system on your OnePlus Nord N30 SE.

Step 1: Hold down the power key and then select “Power Off” from the options on the screen. If, however, your screen is unresponsive, keep holding the power key for several seconds until the OnePlus Nord N30 SE device is completely turned off.

Step 2: Next, you need to hold down the Power and the Volume Key. You should able to see the Android image and a bunch of information about your device. There should also be a “Start” at the top right corner of the screen.

Step 3: Press the Volume up and Volume down keys and use the Power key to select menu options. Press the Volume down key twice to see “Recovery Mode” in red at the top of the screen. Press the Power key to select it.

Step 4: The white Google logo will appear immediately followed by the Android logo again as well as the words “No Command” at the bottom of the screen.

Step 5: Finally, press and hold both the Power and the Volume up Key for around 3 seconds and then let go of the Volume up Key but keep holding the Power Key. You should see the Android system recovery options at the top of the screen. Use the Volume keys to highlight and the Power key to select the one you want.

Part 3. Android Stuck at System Recovery? How to fix in one click?

Sometimes during the System Recovery process, the process can glitch, and you’ll lose data on your device, rendering it unusable. However, another solution to fix this is to repair your device using the Dr.Fone - System Repair tool.

Dr.Fone - System Repair (Android)

One-stop solution to fix Android stuck at System recovery

• It’s the #1 software for PC-based Android repair
• It’s easy to use with no technical experience required
• Supports all latest OnePlus Nord N30 SE devices
• Easy, one-click fix Android stuck at system recovery

3981454 people have downloaded it

Here’s a step by step guide on how to use it yourself;

Note: Be aware that this process can erase all your personal files on your device, so ensure you’ve backed up your OnePlus Nord N30 SE before continuing.

Step #1 Head over to the Dr.Fone website and download the software for your Windows computer.

Once installed on your computer, open onto the main menu and connect your OnePlus Nord N30 SE using the official USB cable. Select the System Repair option.

Step #2 Select the ‘Android Repair’ option from the next screen.

Insert your device information, including the brand, carrier details, model and country and region you’re in to ensure you’re downloading the correct firmware.

Step #3 Follow the onscreen instructions on how to put your device in Download Mode.

Your device should already be in this mode but follow the instructions to make sure. There are methods available for devices, both with and without home buttons.

Step #4 The firmware will now start downloading. You’ll be able to track this process in the window.

Ensure your device, and your computer stays connected the entire time, and make sure your internet connection remains stable.

After downloading, the software will automatically start to repair your device by installing the firmware. Again, you can track the progress of this on the screen, and you’ll need to ensure your device remains connected throughout.

You’ll be notified when the operation is complete and when you’re able to disconnect your phone and use it as normal, free from it being stuck on the Android system recovery screen!

Part 4. Android Stuck at System Recovery? How to fix in a common way?

If, however, your device is stuck on system recovery mode, here’s how you can easily get it out of system recovery. The process is slightly different for different Android devices, so you should check your device’s manual before attempting this process.

Step 1: Power off the OnePlus Nord N30 SE device, and just to be sure, take out the battery to ensure that the OnePlus Nord N30 SE device is fully turned off. Then reinsert the battery.

Step 2: Press and hold down the Home button, Power Button, and the Volume up Key simultaneously until the OnePlus Nord N30 SE device vibrates.

Step 3: Once you feel the vibration, release the power button but continue to hold down the Home and Volume up Key. The Android recovery screen will display. Release the Volume up and Home buttons.

Step 4: Press the Volume down key to select the “Wipe Data/ Factory Reset option and then press the Power button to select it.

Step 5: Next, you need to press the Volume down button to highlight “Delete All User Data” and then press the Power button to select it. The device will reset and present the “Reboot System Now” option.

Step 6: Finally, press the Power button to reboot the phone in normal mode.

Part 5. Backup and Restore Android System

Losing data on your OnePlus Nord N30 SE is a common occurrence, and since Android devices don’t really have an automatic full backup solution, it is important to know how to backup and restore your device system. Here’s how to easily do that.

Step 1: Enter the recovery mode on your OnePlus Nord N30 SE, as described in Part 2 above. Use the Volume and Power keys to select the “Backup & Restore” option on the screen.

Step 2: Tap on the backup option or use the Volume and Power keys if your screen is unresponsive. This will begin backing up your system to the SD card.

Step 3: After the process is complete, choose “Reboot” to restart the OnePlus Nord N30 SE device.

Step 4: You can then simply check Recovery > backup directory on your SD card. You can rename it to easily find it later during the restore process.

To restore the system from the backup created, follow these simple steps.

Step 1: Once again, enter recovery mode as described in part 2 above and then choose Backup & Restore from the menu list.

Step 2: Press “Restore” to begin the recovery process from the Backup file we created

Step 3: You will be notified when the system restore is complete.

Android system recovery mode can be quite useful, especially when your system is unresponsive. As we have also seen, it is important to know how to get into and out of System Recovery mode if you are going to backup and restore your Android system. It is also quite easy to do both of these things.

6 Solutions to Fix Error 505 in Google Play Store on OnePlus Nord N30 SE

In case you are receiving the error code 505 while downloading an application from Google play store and have no clue what is it, then this is the right article for you. In this article we are covering the reasons behind the occurrence of Google play error 505. Not only that, we are also providing 6 solutions to fix the error code 505. Usually, this error is seen with Android 5.0 Lollipop version and occurs at the time when you try to install the already downloaded application making it hard to run the app.

Such an error is a kind of permission error. That is, in case you have two similar kinds of applications such as banking apps and both looking for similar kind of permission, causes conflict error named as error 505.

The occurrence chance is more in the old operating systems, 4 KitKat, Android version 4. Let us then proceed to know more about this error 505.

Part 1: Reasons for Google Play error 505

As per the report by some users, error 505 occurs in certain apps such as Weather App, SBI, ITV, Adobe Air 15, We Chat etc.

To have the right idea about the problem, we have listed all the reasons of it occurrence below:

• Google play store is not updated or refreshed (Causes the error during the downloading process)
• Due to installation of an outdated version (In case your Android version is outdated may result in error in the installation process)
• Cache memory(Is the redundant data occurs due to search history)
• Application is not compatible with the Android OS (If the app you are downloading is not the updated may cause error)
• Adobe air app
• Data crash (Many time app or Google play store crashed crashes after downloading it, reason may be some bugs, so many apps are open, less memory etc.)

Now that we know the reasons, let us also learn about the solutions that will guide you to resolve the error code 505.

Part 2: 6 Solutions to fix error code 505

Any error that occurs during downloading or installation process not only hinders with the new app but also takes a large amount of our time to solve the issue. To check that, let us go through the 6 solutions one by one.

Solution 1: One click to make error code 505 disappear

The most common cause for error code 505 pop-up is that Android system files that underpin the Google Play module are corrupted. To make error code 505 disappear in this condition, you should have your Android system repaired.

Dr.Fone - System Repair (Android)

One click to repair Android system and make error code 505 disappear

• Fix all Android system issues like error code 505, error code 495, error code 963, etc.
• One click to fix error code 505. No technical skills required.
• Supports all the new OnePlus Nord N30 SE devices like Galaxy S8, S9, etc.
• Easy-to-understand instructions provided on each screen.

4,999,459 people have downloaded it

Now, you just need to follow these Android repair steps to fix error code 505:

Note: Android repair needs to flash the system firmware, which may erase existing Android data. To prevent data loss, back up all the important data from Android to PC .

Step1: Download the Dr.Fone - System Repair (Android) program , install and launch it. The following interface will pop up.

Step2: Select the “Android Repair” among the 3 tabs, connect your Android to PC, and click “Start”.

Step3: Choose the correct device details from each field, confirm them and continue.

Step4: Boot your Android in download mode, then start downloading the firmware of your device.

Step5: After the OnePlus Nord N30 SE device firmware is downloaded, the tool will start repairing your Android.

Step6: When your Android is repaired, the error code 505 will disappear.

Solution 2: Check whether Download Manger is ON or not

Many times download manager is set to disable due to which you are not able to download or install the app. So, it is required to make a check whether the download manager is set on or off. So that your installation process will work properly. The process to enable the download manager is as follows.

>Go to Settings

>Select the Application Manger or App (Option depends upon the OnePlus Nord N30 SE device)

At the top, an option will appear

>Swipe right till you locate Download manager at top of the screen of the OnePlus Nord N30 SE device

>Then Select Enable

Enabling download manager to give permission to the OnePlus Nord N30 SE device to start the download or installation process.

Solution 3: Updating to the latest version of OS of your OnePlus Nord N30 SE

Working with an old operating system is ok, but many times old version also creates some problem and is the main reason behind the occurrence of any bug or error. So, updating the older version act like a rescue to get rid of any such issue or bug. The Process of updation is quite simple; you just need to follow the below steps and your device is ready to get updated to the latest version. Steps are:

• >Go to Settings
• >Select about Phone
• >Click on System Update
• >Check for updates
• >Click on Update
• >Need to click on Install (if any update is available)

Solution 4: Clearing the cache memory from Google services Framework and Google play store

While browsing data online or through Google play store some cache memory get stored for the fast access to the pages. Below mentioned simple steps will help you in clearing out the cache memory from Google services framework and Google play store.

Process to clear the Cache memory for Google Services Framework

• >Go to Settings
• >Select Applications
• >Click on Manage Applications
• >Click to select ‘ALL’
• >Click on Google services framework
• >Select ‘Clear data and clear cache’

That will remove the cache memory of your Google services framework

Steps to Cache memory of Google Play Store

• >Go to Settings
• >Applications
• >Manage Applications
• >Click to select ‘ALL’
• >Select Google Play store
• >Clear data and clear cache

It will clear the cache of Google play store

Clearing the cache memory remove the extra temporary memory, thus free up space for the further installation process.

Solution 5: Reinstalling play store Updates

The reason behind the installation error code 505 might be Google play store updates.

Due to continuous updation of new apps and services Google Play store used to be flooded with so many updates or sometimes does not updated properly. That sometimes caused the problem in dealing with app installation. Resolving the issue is important to make your play store ready for future updation and installation.

• >Go to Settings
• >Visit Application Manager or Apps
• >Select Google Play Store
• >Click on Uninstalling Updates
• >A Message will appear ‘Change play store app to factory version’- Accept it
• >Now Open Google play store>It will refresh the updates within 5 to 10 minutes(So you need to keep your internet connection on while Google play store is updating its store for new updates.)

Solution 6: Third party App

In the case, error 505 occur due to the installation of two or more apps with duplicate permission of data, as many times we use to install two similar kind of app that creates the situation where both seeking out for somewhat similar permissions for the installation. The manual finding is a long and tiring process. Then you can take the assistance of ‘Lucky Patcher App’ to find out which app is creating the conflict. This app will assist you in finding out the duplicity if any and then modifying it. Through this app, once you will find out which particular app is causing the conflict, then you can delete that conflicting app from your phone so that problem of error code 505 gets sort out.

Download link: https://www.luckypatchers.com/download/

Note: If still, you are in the state of trouble to solve the issue of error code 505 then Google Play help center is here to look out all troubles related to app store and its service. You can check out the details by visiting the following link:

https://support.google.com/googleplay/?hl=en-IN#topic=3364260

Or call them at their call center number regarding the issue.

Bonus FAQ about Google Play error

Q1: What is a 505 error code?

The HyperText Transfer Protocol (HTTP) error 505: HTTP Version Not Supported response status code means that the HTTP version used in the request is not supported by the server.

Q2: What is a 506 error?

The 506 error code is a frequent error when operating the Google Play Store. You will sometimes see this error code when you are downloading an app. The app may seem to be downloading just fine when suddenly, near the end of the installation, an error occurs, and a message pops up saying, “App could not be downloaded due to an error 506.”

Q3: How to fix the 506?

Solution 1: Restart your device which can help solve most problems.

Solution 2: Remove the SD card safely.

Solution 3: Correct date and time if it is wrong.

Solution 4: Add your Google Account again.

Solution 5: Clear Google Play Store data and cache.

However, sometimes the five simple couldn’t work anymore. A system repair software can be helpful quickly. We really recommend the Dr.Fone - System Repair (Android) , only a few minutes, the error will be fixed.

Conclusion

Not being able to download or install the app is very frustrating and time-consuming also. Therefore, in this article, we went through the reasons behind the occurrence error code 505 as well as resolving the issue by following five effective methods. I hope that you would be able to sort out the error 505 by following above methods thus would be able to install the application without further delay.