Tecno Spark 20C Not Connecting to Wi-Fi? 12 Quick Ways to Fix

Nowadays, it’s pretty much essential to have your Tecno Spark 20C or smartphone connected to the internet. Whether you’re watching videos, looking something up, or using any kind of app, you need the internet for these applications to function correctly.

This is why it can so annoying when it gets to a point where the internet connection isn’t working. However, the problem of a web page not loading correctly is just the tip of the iceberg.

There are plenty of problems you could experience, whether it’s the Wi-Fi network keeps disconnecting on its own without any warning, perhaps a security issue where the passcode or IP address isn’t being registered properly, or even if the connection is just being super slow, even if there’s no reason too.

Luckily, despite there being so many problems out there, there are also many solutions. Today, we’re going to share with you the complete definitive guide to help you get your Tecno Spark 20C connected and free from problems and issues.

Part 1: Restart your Tecno Spark 20C

Begin by powering off your Tecno Spark 20C and unplugging your router. Wait for about a minute before plugging in the router and turning on your device. This simple reset can often restore stable connections and fix Android wifi not working.

Part 2: Turn on Airplane mode and turn off

Turn on Airplane Mode for a few seconds, then turn it off. This maneuver refreshes your device’s network connections and might rectify the Android not connecting to wifi issue.

Part 3. Check Wi-Fi Router settings

The third step you’ll want to take is making sure the internet router in your house is working properly and is actually sending internet data to your Tecno Spark 20C. Of course, if you have other internet-enabled devices connected to the same router and they’re working fine, you know this isn’t the problem.

However, if you’ve got a problem with Wi-Fi not working on your Android and other devices in your home or office, you know you’ve got a router problem. Here’s how to solve it.

Go to your internet router and check the indicator lights
While this depends on your device, a green or blue light will mean the connection is good, whereas a red light indicates a problem
Press the Restart button on your router and wait ten minutes before reconnecting your device and connecting again
Call up your internet provider to see if there’s an internet connection issue in your area
Open your web browser and log into your router settings to ensure your Tecno Spark 20C is connected to the Wi-Fi network and is allowed to send and receive data

Part 4. Boot your Android in safe mode

If you’re unable to connect to the internet, but other devices have no issues, you may find the issues is coming from within your Tecno Spark 20C itself. Fortunately, there are ways you can see whether this is the problem.

The best way to do this is to boot your device in Safe Mode. The process for doing this will depend on the make and model of your Tecno Spark 20C, but the basic process goes as follows;

Turn off your Tecno Spark 20C by holding down the Power button and tapping Power Off. Wait a few minutes to ensure the Tecno Spark 20C device is completely off
Press and hold the Power button to turn your phone on, but the press and hold both the volume up and volume down buttons at the same time
You will see the words ‘Safe Mode’ appear on your screen as the Tecno Spark 20C device loads
Now you will be booted in Safe Mode. Try connecting to the internet again to see if it works

If your device connects to the internet while in Safe Mode, you’ll know you have a problem with an app or service that’s running on your device. If this is the case, you’ll need to go through your apps and delete them and then reinstall them one at a time until you find the app or service that is causing your internet problems.

Part 5. Check the Android Wi-Fi adapter

If you’re using a Wi-Fi adapter on your device to connect to the internet, you’ll need to make sure this is working. This could be an adapter on your Tecno Spark 20C itself, especially if you’re using an older device, or if you’re using an adapter to boost the ranger of your router network.

You need to check both of these to make sure your connection is working properly.

If using an Android Wi-Fi adapter, make sure all the Tecno Spark 20C device drivers are up to date, and if you’re using an app, make sure the app is updated, and all the settings allow an internet connection
If you’re using a router adapter, make sure it’s set up properly, and your Tecno Spark 20C is connected to the adapter using the correct passwords. Try connecting another device to see if the internet connection is working on there
Whichever method you’re using, try disconnecting your Tecno Spark 20C and forgetting the network, and then reconnecting and entering the right password to refresh the connection

Part 6. Check SSID and IP address on Android

To make a Wi-Fi connection work, your Tecno Spark 20C needs to match two codes that connect and relate to your router to establish the connection and work correctly. These are known as the SSID and the IP address.

Every wireless device will have its own codes and making sure they’re matched to the network you’re connecting to is crucial to ensuring the internet is working on your Tecno Spark 20C. Here’s how to check on your Tecno Spark 20C to make sure everything is correct.

Tap the Settings menu option, followed by Wi-Fi on your Tecno Spark 20C
Turn on your Wi-Fi network and connect it to your router
Find the router name (SSID) and make sure it’s exactly the same as the SSID written on your router
Once connected, tap the Wi-Fi network and you will see the IP address. Check both your phone and the router codes to make sure this number matches

When these numbers are matching, if your Android is still not connecting to wifi, you’ll know this wasn’t the problem.

Part 7. Fix Android system issues in one click

If none of the solutions above are working, this could indicate a real problem with the firmware and operating system of your Tecno Spark 20C. Fortunately, a fast solution to get everything working again is to completely repair the software of your phone.

You can do this easily using powerful Android recovery software known as Dr.Fone - System Repair (Android) . This is the leading repair tool on the market and is designed to fix and repair any firmware and software problems you may be having.

Dr.Fone - System Repair (Android)

A one-click tool to fix Wi-Fi not working on Android

Can repair Android from any problem including the black screen of death
A trusted software application used by 50+ million people around the world
The most user-friendly mobile repair application available right now
Supports over 1,000+ Android models and devices
A world-class customer support team to help you whenever you need them

3,483,527 people have downloaded it

To help you have the best and the most accurate experience when using the Dr.Fone - System Repair (Android) application, here’s a complete step-by-step guide on how to use it.

Step One Make your way over to the Wondershare website and download the Dr.Fone - System Repair (Android) software. Install it onto your computer by following the on-screen instructions.

Once installed, connect your Tecno Spark 20C to your computer using a USB cable, and open the software, click “System Repair”.

Step Two Click the “Android” option in the menu and then click “Start” to begin the Repair process.

Step Three On the next screen, go through the options and use the drop-down menus to make sure the information is correct for your individual device. Accept the terms and conditions of the software, and then click the “Next” button.

Step Four Confirm you want the software to carry out the repair process by typing the ‘000000’ code into the pop-up box and pressing Confirm. Make sure you read everything displayed in this box beforehand to know what’s happening.

Step Five Now put your phone into Download Mode by following the on-screen instructions, so your device is ready for the repair process. The method for getting your phone into Download Mode will vary depending on your device, so make sure you’re following the right instructions.

Step Six Once the software has detected your device in Download Mode, it will automatically begin the repair process. You need to make sure your device stays connected throughout this time, and your computer stays on.

The whole process is automatic, so you won’t need to do anything until it’s finished. Once completed, you can disconnect your phone and start connecting it to the internet as normal!

safe & secure

Part 8. Check the Wi-Fi connectivity on another phone

When experiencing problems with your Wi-Fi network, it’s worth noting the problem might not be with your phone, but rather the Wi-Fi network itself. This is why it’s important to make sure you check the connection on another device.

Of course, if you’re already using another phone on your Wi-Fi network, you know this isn’t the case. However, if you’re not sure, here’s what you need to do;

Get another Android or iOS phone or tablet
Open the Settings menu and connect to the Wi-Fi network you’re having problems with
Enter the password and connect to the network
Open a web browser on the phone and try loading a web page
If the page loads, you know the Wi-Fi network isn’t the problem
If the page doesn’t load, you know you’ve got a problem with your Wi-Fi network

Part 9. Change the password of the Wi-Fi

Each Wi-Fi network router will give the opportunity to choose and change the password you have to let devices connect to your network. It’s important you try changing this because you never know if someone else has accessed your network and could be blocking your device. Here’s how it works;

Log onto your computer and open your Wi-Fi settings
Depending on the brand and method of your individual router, navigate to the Wi-Fi password settings menu
Change the password to something complicated using all available digits and characters
Save the password and restart the router to disconnect all devices
Now connect your Tecno Spark 20C to the router using the new password

Part 10. Reset network settings on Android

Just like the method above where you’ll be effectively resetting the network settings on your router, if this hasn’t worked, you’ll be able to reset the network settings on your Tecno Spark 20C, hopefully removing the bugs and allowing you to connect.

Here’s how you can do this easily on your Tecno Spark 20C;

From the home screen of your Tecno Spark 20C, open the Settings menu
Tap the Backup & Reset option
Tap the Reset Network Settings option
Tap the Reset Network option
If you need to, enter the PIN number or passcode for the Android device, and the Tecno Spark 20C device will confirm the reset has taken place
Reconnect your Tecno Spark 20C to your Wi-Fi network for the changes to take effect

Part 11. Clear partition cache in recovery mode

As you continue to use your Tecno Spark 20C, the partition cache will fill up with data your device needs and doesn’t need. However, by clearing your device’s partition cache, you can make clear up some space which should help your device have enough memory to connect to the internet.

Turn off your Tecno Spark 20C
Turn it on by holding down the power button, volume button, and home button
When your phone vibrates, let go of the Power button, but continue to hold the volume button
When a menu is displayed, use the volume buttons to navigate the menu
Select the Android System Recovery option, followed by Wipe Cache Partition
Restart your device and connect to the internet

Part 12. Reset factory settings

If worse comes to worst, another option you have is to factory reset your Tecno Spark 20C. As we’ve spoken about above, while using your phone from the day you started using it, your device will fill up with files and data which can become messy and causes bugs.

However, by factory resetting your device, you can start again from the factory default from which you first received it, ultimately clearing the bugs. Make sure you back up your device before proceeding because it will erase your personal files.

Open the Settings menu on your Tecno Spark 20C
Navigate to System > Advanced > Reset Options
Tap the Reset phone option, and enter your PIN code if required
Tap Erase Everything
Wait for your phone to complete the process
Restart your device and connect to the internet

safe & secure

How To Restore a Bricked Tecno Spark 20C Back to Operation

In moments of lag or freezing on your Android, you might brick Your Tecno Spark 20C, which can be unsettling. This is more than just the loss of a device. A bricked cell phone also involves potential data erasure. Yet, it’s crucial to understand the true implications of a bricked phone. This page tackles how to address the issue of a bricked Android phone.

This comprehensive guide aims to the reasons behind Android phones becoming bricked. By reading below, you’ll learn effective methods to unbrick a mobile phone without the risk of data loss.

Part 1. What are Brick Phones: At a Glance

The term “bricked phone“ is used when a device becomes non-functional. This is typically due to a critical software or firmware error. There are two distinct scenarios for encountering a bricked phone: a soft brick and a hard brick.

Soft Brick. A soft brick entails a phone that’s not operational due to software glitches or conflicts but is not irreparable.
Hard Brick.A hard brick signifies a more dire situation. This is where the phone becomes inoperable, resembling an actual brick in terms of functionality.

The Common Causes of a Cell Phone Bricking

Below are the common causes why a cell phone bricks.

Failed Updates

When a firmware or system update fails, it can lead to a bricked phone. Updates involve intricate changes to the phone’s software. If interrupted or incompatible, the Tecno Spark 20C device may get stuck in a state of partial functionality. This can result in a soft brick.

Failed Flashing

Flashing involves installing custom firmware or software onto a device. If the flashing process is interrupted or if the firmware used is not compatible with the Tecno Spark 20C device’s hardware, it can cause a hard brick. The device’s essential software components may become corrupted, rendering the phone unusable.

Rooting

Rooting, which grants users superuser access to their device’s OS, can lead to bricking if not done right. Rooting often involves making deep system changes, and errors can disrupt the phone’s core functionality.

Installing Bad Apps

Installing malicious, incompatible, or poorly coded apps can lead to a soft brick situation. In severe cases, they can trigger a boot loop or render the phone unresponsive.

Others

Several less common factors can also contribute to bricking. Overclocking, attempting to modify the bootloader, or tampering with system files can lead to disastrous consequences. Hardware issues, such as faulty memory or battery problems, might also manifest as bricked devices.

Part 2. Unbricking Methods and Tools

Below are solutions that you can employ to fix various brick phone scenarios.

Reverting Android Device to Factory Defaults (Soft Brick)

A universal approach to trying to recover a brick phone exists for all Android phones. This is, consider restoring your device to its factory settings. You can find instructions specific to your phone model online. Although this procedure erases all your data, it’s possible to regain the use of your brick phone.

Get in Touch With the Manufacturer (Hard Brick and Soft Brick)

Normally, smartphone warranties span from 1 to 2 years. If your phone remains unrooted and falls within that coverage period, consider reaching out to the manufacturer. This direct approach could lead to your phone being repaired or replaced with a new one at no cost to you.

Seek Professional Assistance (Hard Brick and Soft Brick)

When your phone falls outside the warranty coverage, consider seeking help from a reputable repair shop. However, be aware that any lost data cannot be attributed to their efforts. Fortunately, you can recover lost data using reliable data recovery software once your phone is operational again.

Use a Dedicated App To Fix Bricked Mobile Phones (Hard Brick and Soft Brick)

Among the array of tools designed for unbricking and recovery, one standout is Wondershare Dr.Fone - System Repair (Android). With an exceptional recovery rate, it stands out as one of the top contenders for data retrieval. Its performance is notable when applied to modern brick phones, making it a highly effective choice for these devices.

Part 3. Unbricking Mobile Phones With Dr.Fone - System Repair (Android)

Dr.Fone - System Repair (Android) empowers you to resolve a range of prevalent Android problems. This Android repair tool eliminates the need to hunt for suitable firmware to flash your phone. By utilizing Dr.Fone – System Repair (Android), you can recover data on Your Tecno Spark 20C with a few clicks.

safe & secure

4,039,461 people have downloaded it

Key Features

Below are some of the standout features of Dr.Fone - System Repair (Android)

Address Android Challenges Like a Professional

From common scenarios like black screens and boot loops to even bricked Android devices, this tool has you covered. Dr.Fone has simplified the process so that anyone can fix Android problems.

Support for Over 1000 Android Models

This software is designed to fix glitches including most modern Android devices. Whether your Tecno Spark 20C is an unlocked variant or tied to carriers, you can restore it back to normal in just a matter of minutes.

Trial Access at No Cost

Dr.Fone - System Repair (Android) offers free access for you to test the initial steps and verify device compatibility. This cost-effective feature ensures value for money every step of the way.

Main Advantages of Using Dr.Fone – System Repair (Android)

Dr. Fone – System Repair (Android) is a great solution with numerous tools to help you manage your Tecno Spark 20C in various ways. Here are some of the advantages of using the app for fixing bricked phones.

Fone – System Repair (Android) comes with a clean UI making navigation and usage easy. The user-friendly design offers a seamless experience for beginners and professionals alike.
Utilizing the app for system repair is an effortless and speedy process. It doesn’t take up much time to revive your bricked phoneso you can use it right away.
The System Repair toolkit only needs you to click on a few buttons. Combined with its clean UI and speedy process, using the app is a breeze.

Part 4. How To Revive a Bricked Phone Using Dr.Fone – System Repair (Android)

Below are the steps to recover data on a bricked mobile phone.

Step 1: Download and install Dr.Fone – System Repair (Android) on your computer. Launch the app and select System Repair. Next, choose Select Android as the Tecno Spark 20C device type. Then, connect to your Tecno Spark 20C. Choose Phone Brick as the Android problem and click Start.

Step 2: Select the correct device information. Choose the Brand, Name, Model, Country, and Carrier. Tick the box next to I agree button and click Next to proceed to the next step.

Step 3: Click on the Phone with Home button or Phone without Home button depending on your device. Follow the on-screen instructions and click Next to proceed with reviving your brick phone.

Step 4: Once the Tecno Spark 20C device enters Download Mode, the firmware will automatically start downloading. Follow the on-screen prompts and wait for the system to initiate the repair process. Once it concludes, the completion message will appear on the main window. Click Done to close the tool or click Try again to repeat the process.

safe & secure

4,311,328 people have downloaded it

Conclusion

Fixing a bricked phone may seem daunting, but solutions are within reach. This page explained the distinctions between soft and hard brick scenarios. It also identified common causes and revealed effective methods for unbricking.

Among these, Dr.Fone – System Repair (Android) emerges as a dependable ally. The tool offers a comprehensive toolkit for recovery and data rescue. The power to reclaim lost data lies in your hands. Act, follow the methods outlined, and recover your brick phone.

6 Solutions to Fix Error 505 in Google Play Store on Tecno Spark 20C

In case you are receiving the error code 505 while downloading an application from Google play store and have no clue what is it, then this is the right article for you. In this article we are covering the reasons behind the occurrence of Google play error 505. Not only that, we are also providing 6 solutions to fix the error code 505. Usually, this error is seen with Android 5.0 Lollipop version and occurs at the time when you try to install the already downloaded application making it hard to run the app.

Such an error is a kind of permission error. That is, in case you have two similar kinds of applications such as banking apps and both looking for similar kind of permission, causes conflict error named as error 505.

The occurrence chance is more in the old operating systems, 4 KitKat, Android version 4. Let us then proceed to know more about this error 505.

Part 1: Reasons for Google Play error 505

As per the report by some users, error 505 occurs in certain apps such as Weather App, SBI, ITV, Adobe Air 15, We Chat etc.

To have the right idea about the problem, we have listed all the reasons of it occurrence below:

Google play store is not updated or refreshed (Causes the error during the downloading process)
Due to installation of an outdated version (In case your Android version is outdated may result in error in the installation process)
Cache memory(Is the redundant data occurs due to search history)
Application is not compatible with the Android OS (If the app you are downloading is not the updated may cause error)
Adobe air app
Data crash (Many time app or Google play store crashed crashes after downloading it, reason may be some bugs, so many apps are open, less memory etc.)

Now that we know the reasons, let us also learn about the solutions that will guide you to resolve the error code 505.

Part 2: 6 Solutions to fix error code 505

Any error that occurs during downloading or installation process not only hinders with the new app but also takes a large amount of our time to solve the issue. To check that, let us go through the 6 solutions one by one.

Solution 1: One click to make error code 505 disappear

The most common cause for error code 505 pop-up is that Android system files that underpin the Google Play module are corrupted. To make error code 505 disappear in this condition, you should have your Android system repaired.

Dr.Fone - System Repair (Android)

One click to repair Android system and make error code 505 disappear

Fix all Android system issues like error code 505, error code 495, error code 963, etc.
One click to fix error code 505. No technical skills required.
Supports all the new Tecno Spark 20C devices like Galaxy S8, S9, etc.
Easy-to-understand instructions provided on each screen.

4,999,459 people have downloaded it

Now, you just need to follow these Android repair steps to fix error code 505:

Note: Android repair needs to flash the system firmware, which may erase existing Android data. To prevent data loss, back up all the important data from Android to PC .

Step1: Download the Dr.Fone - System Repair (Android) program , install and launch it. The following interface will pop up.

Step2: Select the “Android Repair” among the 3 tabs, connect your Android to PC, and click “Start”.

Step3: Choose the correct device details from each field, confirm them and continue.

Step4: Boot your Android in download mode, then start downloading the firmware of your device.

Step5: After the Tecno Spark 20C device firmware is downloaded, the tool will start repairing your Android.

Step6: When your Android is repaired, the error code 505 will disappear.

Solution 2: Check whether Download Manger is ON or not

Many times download manager is set to disable due to which you are not able to download or install the app. So, it is required to make a check whether the download manager is set on or off. So that your installation process will work properly. The process to enable the download manager is as follows.

>Go to Settings

>Select the Application Manger or App (Option depends upon the Tecno Spark 20C device)

At the top, an option will appear

>Swipe right till you locate Download manager at top of the screen of the Tecno Spark 20C device

>Then Select Enable

Enabling download manager to give permission to the Tecno Spark 20C device to start the download or installation process.

Solution 3: Updating to the latest version of OS of your Tecno Spark 20C

Working with an old operating system is ok, but many times old version also creates some problem and is the main reason behind the occurrence of any bug or error. So, updating the older version act like a rescue to get rid of any such issue or bug. The Process of updation is quite simple; you just need to follow the below steps and your device is ready to get updated to the latest version. Steps are:

>Go to Settings
>Select about Phone
>Click on System Update
>Check for updates
>Click on Update
>Need to click on Install (if any update is available)

Solution 4: Clearing the cache memory from Google services Framework and Google play store

While browsing data online or through Google play store some cache memory get stored for the fast access to the pages. Below mentioned simple steps will help you in clearing out the cache memory from Google services framework and Google play store.

Process to clear the Cache memory for Google Services Framework

>Go to Settings
>Select Applications
>Click on Manage Applications
>Click to select ‘ALL’
>Click on Google services framework
>Select ‘Clear data and clear cache’

That will remove the cache memory of your Google services framework

Steps to Cache memory of Google Play Store

>Go to Settings
>Applications
>Manage Applications
>Click to select ‘ALL’
>Select Google Play store
>Clear data and clear cache

It will clear the cache of Google play store

Clearing the cache memory remove the extra temporary memory, thus free up space for the further installation process.

Solution 5: Reinstalling play store Updates

The reason behind the installation error code 505 might be Google play store updates.

Due to continuous updation of new apps and services Google Play store used to be flooded with so many updates or sometimes does not updated properly. That sometimes caused the problem in dealing with app installation. Resolving the issue is important to make your play store ready for future updation and installation.

>Go to Settings
>Visit Application Manager or Apps
>Select Google Play Store
>Click on Uninstalling Updates
>A Message will appear ‘Change play store app to factory version’- Accept it
>Now Open Google play store>It will refresh the updates within 5 to 10 minutes(So you need to keep your internet connection on while Google play store is updating its store for new updates.)

Solution 6: Third party App

In the case, error 505 occur due to the installation of two or more apps with duplicate permission of data, as many times we use to install two similar kind of app that creates the situation where both seeking out for somewhat similar permissions for the installation. The manual finding is a long and tiring process. Then you can take the assistance of ‘Lucky Patcher App’ to find out which app is creating the conflict. This app will assist you in finding out the duplicity if any and then modifying it. Through this app, once you will find out which particular app is causing the conflict, then you can delete that conflicting app from your phone so that problem of error code 505 gets sort out.

Download link: https://www.luckypatchers.com/download/

Note: If still, you are in the state of trouble to solve the issue of error code 505 then Google Play help center is here to look out all troubles related to app store and its service. You can check out the details by visiting the following link:

https://support.google.com/googleplay/?hl=en-IN#topic=3364260

Or call them at their call center number regarding the issue.

Bonus FAQ about Google Play error

Q1: What is a 505 error code?

The HyperText Transfer Protocol (HTTP) error 505: HTTP Version Not Supported response status code means that the HTTP version used in the request is not supported by the server.

Q2: What is a 506 error?

The 506 error code is a frequent error when operating the Google Play Store. You will sometimes see this error code when you are downloading an app. The app may seem to be downloading just fine when suddenly, near the end of the installation, an error occurs, and a message pops up saying, “App could not be downloaded due to an error 506.”

Q3: How to fix the 506?

Solution 1: Restart your device which can help solve most problems.

Solution 2: Remove the SD card safely.

Solution 3: Correct date and time if it is wrong.

Solution 4: Add your Google Account again.

Solution 5: Clear Google Play Store data and cache.

However, sometimes the five simple couldn’t work anymore. A system repair software can be helpful quickly. We really recommend the Dr.Fone - System Repair (Android) , only a few minutes, the error will be fixed.

Conclusion

Not being able to download or install the app is very frustrating and time-consuming also. Therefore, in this article, we went through the reasons behind the occurrence error code 505 as well as resolving the issue by following five effective methods. I hope that you would be able to sort out the error 505 by following above methods thus would be able to install the application without further delay.

HowTo

Tecno Spark 20C Not Connecting to Wi-Fi? 12 Quick Ways to Fix | Dr.fone