Top 10 Fixes for Phone Keep Disconnecting from Wi-Fi On Samsung Galaxy XCover 7

The revolutionized world is about the internet, online life, and social media. You can get all the information you need from the internet. You are a click away from booking tickets, buying groceries, calling your loved ones, or even you can handle office meetings with the internet.

Since everything revolves around the internet, it’s annoying if your WI-FI disconnects. You might question yourself why does my Wi-Fi keep disconnecting from the phone? To know the answer, read the article below.

Part 1: Why Does Your Phone Keep Disconnecting from WiFi?

Is your phone frequently getting disconnected from Wi-Fi? Or the internet service is lagging? We have a few options from which you can inspect your problem. Not all internet issues arise from the service provider, as some issues are because of the Samsung Galaxy XCover 7 devices that are using the internet. Some of these issues are discussed below for your assistance:

Router Problems

If the internet provider is doing their job right, the router might not deliver you the right thing. Like other electronic devices, they can also misbehave. This can happen because the router is faulty, or it can happen because the firmware is outdated.

Out of Wi-Fi Range

Why does My Samsung Galaxy XCover 7 keep disconnecting from Wi-Fi? It is because you might be out of range! The router’s placement is very important. The router transmits frequencies that have a limited range. If you are moving out of the range, the internet automatically disconnects.

Wi-Fi Signals Getting Blocked

The signals from the router can dissipate from any other electronic device nearby. Signals like radio and microwaves can interfere with signal strength.

Devices Connected with Router

Commonly, a house has around a dozen devices connected to the internet router. People do not think that the router has limited connection slots. It is unable to entertain a specific number of requests for service facilitation. The router has limitations; the service quality will drop if the limitations are exceeded. This drop in quality can also cause internet disconnection from devices.

Unstable Internet

If your Samsung Galaxy XCover 7 gets disconnected frequently, then this disconnection is due to unstable internet, but apart from the above-mentioned problems, there is another reason for internet disconnection.

Sometimes, the internet is stable, but it still disconnects. This is because the internet service provider might not send the best quality internet you have acquired it for. If your internet is stable and the phone still keeps disconnecting, then head onto the next part that will share the top 10 fixes to sort out this issue.

Part 2: 10 Ways to Fix Wi-Fi Keep Disconnecting on Phone

As we have mentioned earlier if your Wi-Fi is stable, but it keeps disconnecting from Samsung Galaxy XCover 7 S22 or other Android phones, the coming section of this article is for you. We will provide you with 10 solutions with complete assistance to fix the “Wi-fi keeps disconnecting Android“ issue.

Fix 1: Restart Your Phone

If the Wi-Fi keeps disconnecting from your Samsung Galaxy XCover 7, but the internet is stable, then you should try to fix the issue by restarting your phone. Sometimes, it’s the phone that’s causing a problem, so to resolve it, you can follow the steps given below:

Step 1: Firstly, unlock your phone. Now, press the Power button and hold it for a few seconds.

Step 2: Now, select the ‘Reboot’ option to resolve the issue from the options on the screen.

Fix 2: Check Router Settings

If your Android keeps disconnecting from Wi-Fi, you can also fix the problem by checking the router settings. This is because your phone might be blocked from connecting to the network, and if this is the scenario, your phone will never maintain the connection. You should check the Router’s admin panel or app to remove your phone from the blocklist.

Fix 3: Reconnect to Network

To fix the annoying problem that your Wi-Fi keeps disconnecting, you should try forgetting the network and then reconnecting to it. This could be done easily by following the steps below:

Step 1: First, you need to open the Wi-Fi settings menu. This could be done by pressing and holding the Wi-Fi option from the drop-down menu of your phone until the settings open up.

Step 2: A list of all the Wi-Fi networks will appear on the screen. Select the network that is causing trouble from that list and hit the ‘Forget Network’ option.

Step 3: After that, you should reconnect to this Wi-Fi network by selecting it from the Wi-Fi list and entering its password.

Fix 4: Restart Your Router

As we discussed, to restart your phone, you can also restart the router to get rid of the problem. For this, hit the restart button on the router to get a fresh start. If the Samsung Galaxy XCover 7 device has no button, disconnect the power supply and plug it back in to connect again. Most internet issues are resolved by restarting the router.

Fix 5: Forget Old Networks

The problem that your Wi-Fi keeps disconnecting can also occur because of the list of networks you have connected to. Having yourselves connected to different set of networks could turn out to be quite problematic in the process. In the process of finding and switching to the best network, your device’s Wi-Fi will continually disconnect and reconnect with the nearby networks. To finish this irritating issue, you should remove and forget all the extra networks that you connected previously.

Step 1: You should start by pressing and holding the Wi-Fi option from the drop-down menu on your phone until the Wi-Fi settings screen appears.

Step 2: You will see a list of all the Wi-Fi networks you have connected to previously. One by one, select each network and hit the ‘Forget Network’ button to remove it.

Fix 6. Check Recently Installed Applications

Sometimes, different installed applications can also cause trouble. If your Wi-Fi was fine, but suddenly it started disconnecting, then don’t forget to check the recently installed apps. This is because with not knowing the damage it can cause, you might have installed some VPNs, connections boosters, or firewalls. You can try and disable them but if that doesn’t resolve the problem, then uninstall the app.

Step 1: For uninstalling the problematic application, you have to select it and hold it. You will see a pop-up menu of multiple options; choose the option of ‘Uninstall’ to remove the app from the phone.

Fix 7: Reset Network Settings on your Phone

It’s annoying that your Wi-Fi keeps disconnecting while you are working or studying. Android users can easily get over this problem by resetting the network settings. The steps for this fix are as follows:

Step 1: For resetting the network, start by opening the ‘Settings’ menu on your phone. Then, scroll down, look for the ‘Connection & Sharing’ option, and select it.

Step 2: As you progress onto a new screen, you will find the option of “Reset Wi-Fi, Mobile Networks, and Bluetooth” in the menu. Select the option to lead to the next window.

Step 3: Click on the option of “Reset Settings” present on the bottom of the next screen that shows up. Provide confirmation of resetting these settings by inserting your device’s PIN, if any.

Step 4: After providing the appropriate clearances, you will be asked for another confirmation of resetting the Samsung Galaxy XCover 7 device’s networks to default. Click “OK” to execute.

Fix 8: Check Routers Range

If your Wi-Fi automatically disconnects and connects again while you are roaming in the house, then it is because of the router’s range; you should check it. For this, you can consider changing and modifying your AP (Access Point) band on your router.

Although the 5GHz frequency band is recognized for providing better network speeds, this band has a shorter range as compared to the 2.4GHz band, which has a better coverage of area. You can easily shift your router’s range through its configuration page. It is considered optimal to utilize the 2.4GHz frequency band for better ranges.

Fix 9: Stay Connected while Asleep

Most Android phones have a battery-saving feature. This feature disables the network connections to save the battery of the phone. If this is why the Wi-Fi keeps disconnecting, follow the steps shared below to fix it:

Step 1: Start by opening the ‘Settings’ menu on your phone. Then scroll down until you find the ‘Battery’ option and open it.

Step 2: Then, from the battery screen, hit the ‘More Battery Settings’ options. Then, you will see the ‘Stay Connected while Asleep’ option; turn it on.

Fix 10: Upgrade Router Firmware

If none of the above-shared fixes work, the last fix to resolve the problem is upgrading your router firmware. For this, you should contact any professional who knows network operations as upgrading router firmware takes time and requires knowledge.

Wi-Fi Stay Connected

The article above has discussed 10 solutions that offer a comprehensive toolkit to tackle the persistent issue of Wi-Fi keeps turning off Android. By toggling Airplane Mode, restarting your device, adjusting settings, and updating firmware, among other steps, you can effectively address and resolve this connectivity problem. With these solutions at your disposal, you can regain a stable and uninterrupted Wi-Fi experience on your Samsung Galaxy XCover 7.

How to Quickly Fix Bluetooth Not Working on Samsung Galaxy XCover 7

One of the key features of an Android device these days is the Bluetooth technology. This is such an important part of the phone that many of us take for granted, but as soon as the feature stops working, it can cause all kinds of problems.

Fortunately, despite there being many reasons why a problem could occur to your Bluetooth feature, there are also plenty of fixes. Today, we’re going to share with you the complete guide that details everything you need to know to get your Bluetooth up and running once again as quickly as possible.

Let’s get straight into it!

Part 1. About Bluetooth Not Working on Android

Of course, the most common problem to occur with Bluetooth technology in your Samsung Galaxy XCover 7 is when it doesn’t connect to the Samsung Galaxy XCover 7 device you’re trying to link it to. This could be anything from a Bluetooth headset or headphones, to a portable speaker or even an in-car audio system.

However, the problems don’t stop there. You may have problems with turning your Bluetooth settings on through your actual device. Perhaps the software simply isn’t loading, or maybe the Bluetooth feature keeps turning itself off randomly.

Due to the complicated nature of Bluetooth technology, there could be many reasons as to why your Bluetooth feature is playing up in this way, but that doesn’t mean it can’t be fixed. For the rest of this guide, we’re going to explore the nine need-to-know ways you can fix the Bluetooth problems not working on your Samsung Galaxy XCover 7 as quickly as possible.

Part 2. 9 fixes for Bluetooth not working on Android

2.1 One click to fix Android Bluetooth issues due to Android system

Since Bluetooth is an internal technology, this indicates there’s a problem with the software or firmware of your Samsung Galaxy XCover 7. If something’s broken, this means you need to fix it. Fortunately, there’s a quick and easy way to do this using software known as Dr.Fone - System Repair (Android).

Dr.Fone - System Repair (Android) is a powerful Android repair tool which is hailed as many as being on the best software applications in the industry. With all the tools you need to repair your phone not just for Bluetooth errors, but basically any internal firmware problems, this is a one-shot-tool that gets the job done.

Dr.Fone - System Repair (Android)

Android repair tool to fix Bluetooth issues in one click

Can fix most internal software and firmware issues
Trusted by over 50+ million people around the world
Supports over 1,000+ unique Android brands, manufacturers, and devices
Incredibly user-friendly and easy-to-use
Compatible with all Windows computers

3981454 people have downloaded it

To ensure you have the best experience while using the Dr.Fone - System Repair (Android) software, here’s a complete step-by-step guide on how it works when fixing your Android’s Bluetooth problems.

Step One Make your way over to the Wondershare website and download the Dr.Fone - System Repair (Android) software to either your Mac or Windows computer. Install the downloaded file by following the on-screen instructions. Once installed, open the software, so you’re on the Main Menu.

Step Two Connect your Samsung Galaxy XCover 7 to your computer using the USB cable, wait a couple of seconds, and then click the System Repair option. On the Menu on the left, click Android Repair, and then press Start.

Step Three Next, use the drop-down menus to make sure all the information about your specific device is correct, including your device, operating system number, and carrier information. Click Next to confirm your selections.

Step Four When prompted, put your phone into Download Mode needed for repairs. You can do this by following the on-screen instructions which will depend on which device you have and the available buttons.

Step Five The software will now begin the repair process. This will happen automatically, and all you’ll need to do is make sure your device doesn’t disconnect during this process, and your computer doesn’t turn off.

When the repair process has been completed, you’ll receive the screen below, which means you can try again if the process didn’t work, or you can disconnect your Samsung Galaxy XCover 7 and start using it and your Bluetooth features.

2.2 Restart Android and turn on Bluetooth again

One of the most common solutions in technology is simply to turn it on and off again, which is the case to happen here. By restarting your device, you can clear out any problems you may be suffering from to help it get up and running again. Here’s how;

Turn your Samsung Galaxy XCover 7 off by holding down the Power button
Wait for several minutes and then turn your phone on again
Wait for your phone to completely power up, so you’re on the Main Menu
Navigate Settings > Bluetooth and then enable the setting
Try to connect your Bluetooth device to what you were trying to do before

2.3 Clear the Bluetooth cache

Every service on your Samsung Galaxy XCover 7 using a feature called a cache. This is where information is stored to help the feature run properly and give you the best experience. However, over time this can get messy and can cause problems with your Bluetooth feature.

By clearing the cache, you can restart the service and hopefully clear up any issues or problems you may be experiencing.

On your phone, navigate Settings > Application Manager, and you’ll see all the apps and services on your phone. Locate and select the Bluetooth service.
Select the Storage option
Tap the Clear Cache option
Go back of the Menu and restart your phone
Now turn your Bluetooth feature on and turn connecting it to your preferred device

2.4 Remove paired devices

Sometimes, you may have a problem with the Samsung Galaxy XCover 7 device you’re trying to connect to via Bluetooth, especially if this is a device you’ve updated. To counter and repair this, you’re going to need to remove the paired devices saved with your device and then reconnect them.

Here’s how;

From the Main Menu of your Samsung Galaxy XCover 7, head to Settings > Bluetooth > Connected Devices.
Turn Bluetooth on, and you’ll see all the connections your Samsung Galaxy XCover 7 is paired with
Go through these settings and remove/delete/forget every connection on your device
Now when you go to connect to a device using Bluetooth, repair the Samsung Galaxy XCover 7 device, enter the passcode, and use a fresh paired connection.

2.5 Use Bluetooth in safe mode

If you’re having problems with your connection and paired devices, sometimes you may have conflicting software faults in your device that are causing the problems. If this is the case, you’ll need to boot your Samsung Galaxy XCover 7 in Safe Mode.

This is an operating state in which your phone will run the bare minimum services it needs to perform. If your Bluetooth works in Safe Mode, you know you have an app or a service that’s causing the problem.

Here’s how to find out;

Hold the power button down, so the Android power menu turns on
Long-press the power button again and the restart in Safe Mode option will come up
The phone will automatically boot into Safe Mode
Wait a minute on the Main Menu
Now turn on your Bluetooth and connect it to your preferred device

2.6 Turn on the discoverable feature

To ensure your Bluetooth can connect to other devices, it’s important to make sure you’re making your device discoverable to other Bluetooth devices. If it’s hidden, other devices won’t be able to find it, and sometimes it can bug and prevent connections.

Here’s how to turn on your Bluetooth discoverable feature;

From the home screen of your Android, navigate to the Menu> Settings > Bluetooth
Toggle the Bluetooth switch, so it’s on
Under the available settings, tick the box that allows your Bluetooth device to be discoverable
Turn your Bluetooth feature on and connect to the Samsung Galaxy XCover 7 device you’re trying to connect too

2.7 Exclude Bluetooth issues of the other device

Sometimes, you might not even have a problem with your Samsung Galaxy XCover 7, but rather the Bluetooth device you’re trying to connect to, whether that’s a Bluetooth speaker, an in-car entertainment system, or any other kind of Bluetooth device.

By testing out another Bluetooth device to see if it will work with your preferred device, you can rule this out from being the issue.

Disconnect your Samsung Galaxy XCover 7 from the Bluetooth device and turn your Bluetooth off
Now take another Bluetooth device and connect this to the Samsung Galaxy XCover 7 device you’re trying to connect too. This could be another Android device, or even a computer or iOS device
If the new device doesn’t connect to your Bluetooth device, you’ll know there’s a problem with your Bluetooth device, not your Samsung Galaxy XCover 7
If the Samsung Galaxy XCover 7 devices connect, you’ll know there’s a problem with your Samsung Galaxy XCover 7

2.8 Place both devices within close proximity

One of the common misconceptions of Bluetooth is just how far the wireless range is of the service. You need to make sure your devices are well and truly close to each other to make sure a stable connection can be formed.

The further away the Samsung Galaxy XCover 7 devices are from each other, the less likely the connection will remain secure. As a rule of thumb, Bluetooth can work up to 100 meters, but to play it safe, always try and keep your devices under 50m apart.

2.9 Avoid interference of other Bluetooth sources

The final consideration you’ll want to think about is that Bluetooth radio waves, or wireless waves, can interfere with each other. This means they can bounce off each other or get muddled up and make things confusing from your devices.

With this in mind, you’ll want to make sure you’re limiting the amount of Bluetooth activity in the area where you’re trying to use a device. While uncommon, this could be the problem.

To fix this issue, turn off all the Bluetooth connections in the area. This includes computers, laptops, mobile phones, tablets, and any other Bluetooth devices you may have. Then, try connecting your Samsung Galaxy XCover 7 to the Samsung Galaxy XCover 7 device you were trying to use. If it works, you know you were experiencing Bluetooth interference.

Home Button Not Working on Samsung Galaxy XCover 7? Here Are Real Fixes

There is no doubt that it is quite frustrating when your device buttons, such as home and back don’t work properly. The reasons can be software as well as hardware issues. If you are wondering whether there is any solution to fix this problem, then you’ve come to the right place. Firstly, yes some methods can probably help you to come out of this issue. Here, in this guide, we have covered various solutions you can try to resolve the “home button not working Android” problem no matter whether it is due to software or hardware reason.

Part 1: 4 Common Measures to Fix Home Button Not Working Android

Here, we are going to mention four common methods that you can try to resolve the home button problem on your Samsung Galaxy XCover 7 with ease.

1.1 One click to fix Android Home Button Not Working

[Try It Free](https://download.wondershare.com/drfone_repair_full3371.exe)

When it comes to the home button not working Samsung Galaxy XCover 7 problem, the most common reason is the unknown system issues. In such a scenario, the best solution is using Dr.Fone - System Repair (Android) software to repair your Android system to normal in one click. This tool is powerful enough to resolve various Android issues within a few minutes.

Dr.Fone - System Repair (Android)

Android repair tool to fix home button not working on Android

The tool can help you to fix the Android operating system in a wide range of scenarios.
It is compatible with all Samsung Galaxy XCover 7 devices.
There is no need for technical skills to use the software.
The software comes with a high success rate for fixing the Android system.
It provides easy steps to resolve Android issues.

3981454 people have downloaded it

To learn how to fix home button not working problem, download and install the Dr.Fone - System Repair (Android) software on your computer, follow the below step-by-step guide:

Step 1: To begin with the process, launch the software on your computer and select the “System Repair” option from the software main window.

Step 2: Thereafter, connect your Samsung Galaxy XCover 7 to the computer using a USB cable and select the “Android Repair” tab from the left menu.

Step 3: Next, you will navigate to a device information page where you have to provide your device information.

Step 4: After that, the software will download the appropriate firmware to repair your Android system.

Step 5: After downloading the firmware, the software will start the repair process. Wait for a few seconds, the problem should get fixed and your phone will get back to its normal state.

1.2 Force Restart your Android

Whenever you encounter with Android virtual soft keys, not working problem, the first thing you should try is to force restart your phone . If the problem is due to a software issue, then it can be probably fixed by simply force restarting your Android.

Here are simple steps on how to force restart on Android:

Step 1: To begin with, press and hold the power button and either volume up or down button at the same time until your device screen goes off.

Step 2: Next, press the power button for a few moments to force restart your device.

1.3 Restore Factory Settings

If force restarting won’t help you to fix the problem you are facing, it’s time to reset your Samsung Galaxy XCover 7 to factory settings. The factory reset on an Android device will erase all of your phone settings, third-party apps, user data, and other app data to restore your device to its original manufacturer condition or settings. It means that this can bring back your device to its normal state.

To learn how to restore factory settings, follow the below steps:

Step 1: Go to your ‘Settings” and then, go to “System”>” Advanced”>” Reset options”.

Step 2: Next, tap on “Erase all data”>” Reset phone” to factory reset on your phone. Here, you may need to enter the password or pin or pattern.

Once you are done with the above steps, restart your phone and restore your data and this might be fixed the problem for you. If not, then try the next solution.

1.4 Update Android Firmware

It might be the case that your Android firmware is not updated and that’s why you are experiencing the home button not working Android problem. Sometimes, not updating your Android firmware can cause various issues and problems while using your device. So, you should update it, and here are steps on how to do it:

Step 1: Open the Settings and then, go to “About device”. Next, click “System updates”.

Step 2: After that, click “Check for updates” and if updates are available, then download and install it to update your Android version.

Part 2: What if the Home Button fails due to hardware reasons?

When your Android home and back button not working because of hardware reasons, you can’t get the problem resolved by simply rebooting your device. In such cases, you have to use alternative apps to replace the home button.

2.1 Simple Control app

The Simple Control app is the first and foremost solution to fix the Android home button not working issue. With the help of this app, you can fix many soft keys of your device. It is specially designed for Android users facing trouble using home, volume, back, and camera buttons. Plus, the app utilizes Accessibility service, but it doesn’t get access to your sensitive and personal information.

Pros:

It can easily replace broken and failed buttons.
The app is quite easy to use.

Cons:

It is not as much efficient as other similar apps available out there.

URL: https://play.google.com/store/apps/details?id=ace.jun.simplecontrol&hl=en_US

2.2 Button Savior app

Button Savior app is one of the ultimate apps that can help you to fix the Android home button not working problem with ease. For this app, root and no root versions are available on the Google Play store. To fix the Home button not working issue, no root version is the right one. But, if you want to fix the Back button or other buttons, then you need to go for the root version.

Pros:

It comes with a root as well as no root version.
The app is powerful enough to fix a wide range of buttons.
It shows information regarding the date and time and battery.

Cons:

The root version of the app can cause data loss.

URL: https://play.google.com/store/apps/details?id=com.smart.swkey" target="_blank” rel=”nofollow

Navigation Bar app is another great solution to fix the home button not responding problem. It can replace broken and failed button for users who are facing difficulty using navigation bar panel or buttons not working properly. The app offers numerous features, and it is easy to use.

Pros:

It offers many colors to make an incredible navigation bar.
The app provides 15 themes for customization.
It comes with the ability to change the size of the navigation bar.

Cons:

Sometimes, the navigation bar stopped working.
It comes with ads.

URL: https://play.google.com/store/apps/details?id=nu.nav.bar

2.4 Home Button app

Home button app is another remarkable solution to replace broken and failed home buttons for users having trouble while using buttons. With this app, it is quite easy to press or even long press on the home button as assistive touch.

Pros:

You can change the button of color using the app.
With the help of it, you can set a vibrate setting on touch.
It provides support for many press actions, such as home, back, power menu, etc.

Cons:

It doesn’t come with a lot of features, unlike other apps.
Sometimes, it shuts down automatically.

URL: https://play.google.com/store/apps/details?id=nu.home.button

2.5 Multi-action Home Button app

Is your Android physical home button is broken or dead? If yes, then the Multi-action Home Button app can help you to fix it with ease. With the help of it, you can create a button in centre-bottom of your device screen, and you can also add numerous actions to that button.

Pros:

It provides various actions with the button.
It is very simple and easy to use.

Cons:

The app’s very useful feature comes with its pro version.

URL: https://play.google.com/store/apps/details?id=com.home.button.bottom

Conclusion

Hopefully, the methods covered in this post helps you to fix Android home and back button not working problem for you. If it is a system issue, then the best thing you can do is to take advantage of Dr.Fone - System Repair (Android) software. It can surely help you to fix your Android system to normal within a few minutes.

HowTo

Top 10 Fixes for Phone Keep Disconnecting from Wi-Fi On Samsung Galaxy XCover 7 | Dr.fone