Xiaomi Redmi Note 12 5G Not Connecting to Wi-Fi? 12 Quick Ways to Fix

Nowadays, it’s pretty much essential to have your Xiaomi Redmi Note 12 5G or smartphone connected to the internet. Whether you’re watching videos, looking something up, or using any kind of app, you need the internet for these applications to function correctly.

This is why it can so annoying when it gets to a point where the internet connection isn’t working. However, the problem of a web page not loading correctly is just the tip of the iceberg.

There are plenty of problems you could experience, whether it’s the Wi-Fi network keeps disconnecting on its own without any warning, perhaps a security issue where the passcode or IP address isn’t being registered properly, or even if the connection is just being super slow, even if there’s no reason too.

Luckily, despite there being so many problems out there, there are also many solutions. Today, we’re going to share with you the complete definitive guide to help you get your Xiaomi Redmi Note 12 5G connected and free from problems and issues.

Part 1: Restart your Xiaomi Redmi Note 12 5G

Begin by powering off your Xiaomi Redmi Note 12 5G and unplugging your router. Wait for about a minute before plugging in the router and turning on your device. This simple reset can often restore stable connections and fix Android wifi not working.

Part 2: Turn on Airplane mode and turn off

Turn on Airplane Mode for a few seconds, then turn it off. This maneuver refreshes your device’s network connections and might rectify the Android not connecting to wifi issue.

Part 3. Check Wi-Fi Router settings

The third step you’ll want to take is making sure the internet router in your house is working properly and is actually sending internet data to your Xiaomi Redmi Note 12 5G. Of course, if you have other internet-enabled devices connected to the same router and they’re working fine, you know this isn’t the problem.

However, if you’ve got a problem with Wi-Fi not working on your Android and other devices in your home or office, you know you’ve got a router problem. Here’s how to solve it.

Go to your internet router and check the indicator lights
While this depends on your device, a green or blue light will mean the connection is good, whereas a red light indicates a problem
Press the Restart button on your router and wait ten minutes before reconnecting your device and connecting again
Call up your internet provider to see if there’s an internet connection issue in your area
Open your web browser and log into your router settings to ensure your Xiaomi Redmi Note 12 5G is connected to the Wi-Fi network and is allowed to send and receive data

Part 4. Boot your Android in safe mode

If you’re unable to connect to the internet, but other devices have no issues, you may find the issues is coming from within your Xiaomi Redmi Note 12 5G itself. Fortunately, there are ways you can see whether this is the problem.

The best way to do this is to boot your device in Safe Mode. The process for doing this will depend on the make and model of your Xiaomi Redmi Note 12 5G, but the basic process goes as follows;

Turn off your Xiaomi Redmi Note 12 5G by holding down the Power button and tapping Power Off. Wait a few minutes to ensure the Xiaomi Redmi Note 12 5G device is completely off
Press and hold the Power button to turn your phone on, but the press and hold both the volume up and volume down buttons at the same time
You will see the words ‘Safe Mode’ appear on your screen as the Xiaomi Redmi Note 12 5G device loads
Now you will be booted in Safe Mode. Try connecting to the internet again to see if it works

If your device connects to the internet while in Safe Mode, you’ll know you have a problem with an app or service that’s running on your device. If this is the case, you’ll need to go through your apps and delete them and then reinstall them one at a time until you find the app or service that is causing your internet problems.

Part 5. Check the Android Wi-Fi adapter

If you’re using a Wi-Fi adapter on your device to connect to the internet, you’ll need to make sure this is working. This could be an adapter on your Xiaomi Redmi Note 12 5G itself, especially if you’re using an older device, or if you’re using an adapter to boost the ranger of your router network.

You need to check both of these to make sure your connection is working properly.

If using an Android Wi-Fi adapter, make sure all the Xiaomi Redmi Note 12 5G device drivers are up to date, and if you’re using an app, make sure the app is updated, and all the settings allow an internet connection
If you’re using a router adapter, make sure it’s set up properly, and your Xiaomi Redmi Note 12 5G is connected to the adapter using the correct passwords. Try connecting another device to see if the internet connection is working on there
Whichever method you’re using, try disconnecting your Xiaomi Redmi Note 12 5G and forgetting the network, and then reconnecting and entering the right password to refresh the connection

Part 6. Check SSID and IP address on Android

To make a Wi-Fi connection work, your Xiaomi Redmi Note 12 5G needs to match two codes that connect and relate to your router to establish the connection and work correctly. These are known as the SSID and the IP address.

Every wireless device will have its own codes and making sure they’re matched to the network you’re connecting to is crucial to ensuring the internet is working on your Xiaomi Redmi Note 12 5G. Here’s how to check on your Xiaomi Redmi Note 12 5G to make sure everything is correct.

Tap the Settings menu option, followed by Wi-Fi on your Xiaomi Redmi Note 12 5G
Turn on your Wi-Fi network and connect it to your router
Find the router name (SSID) and make sure it’s exactly the same as the SSID written on your router
Once connected, tap the Wi-Fi network and you will see the IP address. Check both your phone and the router codes to make sure this number matches

When these numbers are matching, if your Android is still not connecting to wifi, you’ll know this wasn’t the problem.

Part 7. Fix Android system issues in one click

If none of the solutions above are working, this could indicate a real problem with the firmware and operating system of your Xiaomi Redmi Note 12 5G. Fortunately, a fast solution to get everything working again is to completely repair the software of your phone.

You can do this easily using powerful Android recovery software known as Dr.Fone - System Repair (Android) . This is the leading repair tool on the market and is designed to fix and repair any firmware and software problems you may be having.

Dr.Fone - System Repair (Android)

A one-click tool to fix Wi-Fi not working on Android

Can repair Android from any problem including the black screen of death
A trusted software application used by 50+ million people around the world
The most user-friendly mobile repair application available right now
Supports over 1,000+ Android models and devices
A world-class customer support team to help you whenever you need them

3,483,527 people have downloaded it

To help you have the best and the most accurate experience when using the Dr.Fone - System Repair (Android) application, here’s a complete step-by-step guide on how to use it.

Step One Make your way over to the Wondershare website and download the Dr.Fone - System Repair (Android) software. Install it onto your computer by following the on-screen instructions.

Once installed, connect your Xiaomi Redmi Note 12 5G to your computer using a USB cable, and open the software, click “System Repair”.

Step Two Click the “Android” option in the menu and then click “Start” to begin the Repair process.

Step Three On the next screen, go through the options and use the drop-down menus to make sure the information is correct for your individual device. Accept the terms and conditions of the software, and then click the “Next” button.

Step Four Confirm you want the software to carry out the repair process by typing the ‘000000’ code into the pop-up box and pressing Confirm. Make sure you read everything displayed in this box beforehand to know what’s happening.

Step Five Now put your phone into Download Mode by following the on-screen instructions, so your device is ready for the repair process. The method for getting your phone into Download Mode will vary depending on your device, so make sure you’re following the right instructions.

Step Six Once the software has detected your device in Download Mode, it will automatically begin the repair process. You need to make sure your device stays connected throughout this time, and your computer stays on.

The whole process is automatic, so you won’t need to do anything until it’s finished. Once completed, you can disconnect your phone and start connecting it to the internet as normal!

safe & secure

Part 8. Check the Wi-Fi connectivity on another phone

When experiencing problems with your Wi-Fi network, it’s worth noting the problem might not be with your phone, but rather the Wi-Fi network itself. This is why it’s important to make sure you check the connection on another device.

Of course, if you’re already using another phone on your Wi-Fi network, you know this isn’t the case. However, if you’re not sure, here’s what you need to do;

Get another Android or iOS phone or tablet
Open the Settings menu and connect to the Wi-Fi network you’re having problems with
Enter the password and connect to the network
Open a web browser on the phone and try loading a web page
If the page loads, you know the Wi-Fi network isn’t the problem
If the page doesn’t load, you know you’ve got a problem with your Wi-Fi network

Part 9. Change the password of the Wi-Fi

Each Wi-Fi network router will give the opportunity to choose and change the password you have to let devices connect to your network. It’s important you try changing this because you never know if someone else has accessed your network and could be blocking your device. Here’s how it works;

Log onto your computer and open your Wi-Fi settings
Depending on the brand and method of your individual router, navigate to the Wi-Fi password settings menu
Change the password to something complicated using all available digits and characters
Save the password and restart the router to disconnect all devices
Now connect your Xiaomi Redmi Note 12 5G to the router using the new password

Part 10. Reset network settings on Android

Just like the method above where you’ll be effectively resetting the network settings on your router, if this hasn’t worked, you’ll be able to reset the network settings on your Xiaomi Redmi Note 12 5G, hopefully removing the bugs and allowing you to connect.

Here’s how you can do this easily on your Xiaomi Redmi Note 12 5G;

From the home screen of your Xiaomi Redmi Note 12 5G, open the Settings menu
Tap the Backup & Reset option
Tap the Reset Network Settings option
Tap the Reset Network option
If you need to, enter the PIN number or passcode for the Android device, and the Xiaomi Redmi Note 12 5G device will confirm the reset has taken place
Reconnect your Xiaomi Redmi Note 12 5G to your Wi-Fi network for the changes to take effect

Part 11. Clear partition cache in recovery mode

As you continue to use your Xiaomi Redmi Note 12 5G, the partition cache will fill up with data your device needs and doesn’t need. However, by clearing your device’s partition cache, you can make clear up some space which should help your device have enough memory to connect to the internet.

Turn off your Xiaomi Redmi Note 12 5G
Turn it on by holding down the power button, volume button, and home button
When your phone vibrates, let go of the Power button, but continue to hold the volume button
When a menu is displayed, use the volume buttons to navigate the menu
Select the Android System Recovery option, followed by Wipe Cache Partition
Restart your device and connect to the internet

Part 12. Reset factory settings

If worse comes to worst, another option you have is to factory reset your Xiaomi Redmi Note 12 5G. As we’ve spoken about above, while using your phone from the day you started using it, your device will fill up with files and data which can become messy and causes bugs.

However, by factory resetting your device, you can start again from the factory default from which you first received it, ultimately clearing the bugs. Make sure you back up your device before proceeding because it will erase your personal files.

Open the Settings menu on your Xiaomi Redmi Note 12 5G
Navigate to System > Advanced > Reset Options
Tap the Reset phone option, and enter your PIN code if required
Tap Erase Everything
Wait for your phone to complete the process
Restart your device and connect to the internet

safe & secure

Calls on Xiaomi Redmi Note 12 5G Go Straight to Voicemail? 12 Fixes

Have you ever experienced incoming calls to your phone go straight to voicemail without ringing? It can be frustrating, especially if you’re expecting an important call. It could be due to simple things like turning down the volume or forgetting to turn off the Do Not Disturb mode. In other cases, it might be because you accidentally blocked the caller’s number.

In most cases, incoming calls going to voicemail without ringing are common. However, if it’s happening frequently or for all calls, your phone may have a problem.

This article will discuss why incoming phone calls go straight to voicemail and how to fix the problem. We’ll also show you how to use Wondershare Dr.Fone, a powerful Android System Repair tool, to solve such issues. So, if you’re uncertain why that last call went straight to voicemail, keep reading, and we’ll cover everything you need to know.

Part 1: Not Ringing? Here’s Why Calls on Your Phone Go Straight to Voicemail

If an incoming call to your cell phone goes straight to voicemail without ringing, there could be a few reasons. Here’s what to look for and what you should do to fix it:

Turn Off Do Not Disturb (DND) Mode

DND mode is a feature that silences all incoming calls, notifications, and alerts. If DND mode is enabled, your cell phone goes straight to voicemail when someone calls. To turn off DND mode, swipe down from the top of the screen to open the notification settings panel, then tap the Do not disturb icon.

Here’s an alternative way:

Step 1: Open the Settings app and go to Notifications.
Step 2: Tap Do not disturb.

Step 3: Toggle Do Not Disturb offto disable the mode.

Turn Off Call Forwarding

One reason calls go straight to voicemail without ringing is if you enabled call forwarding. Call forwarding is a feature that redirects incoming calls to another number. To turn off call forwarding:

Step 1: Open the Phone Dialer app on your device, then tap the menu icon and select Settings.

Step 2: Navigate to Supplementary services > Call forwarding.

Disable Call Barring

If a phone call went straight to voicemail, another possible explanation is the call barring. It is a feature that restricts calls from being made or received on your phone. If activated, it can cause incoming calls to a phone to go straight to voicemail. To turn off call barring on Xiaomi Redmi Note 12 5G devices:

Step 1: Open the Phone Dialer app, then tap the menu icon in the top right corner.
Step 2: Go to Settings > Supplementary services > Call barring, then tap OK.
Step 3: Select Voice call, then turn off your preferred outgoing and incoming calls. When prompted, enter 0000 as a password.

Update Your Phone’s Software

Sometimes, software bugs can cause problems with incoming calls, which may be why your last incoming call went straight to voicemail. If your phone runs outdated software, try updating it to the latest version.

To check for updates, open the Settings app and go to Software update or System update. For a seamless update experience, follow the step-by-step instructions on your mobile screen.

Reset Network Settings

If the incoming calls on your phone go straight to voicemail, consider resetting your phone’s network settings. Network settings control how your phone connects to the cellular network. If these settings are not set up correctly, incoming calls may not be able to reach your device.

Note: Resetting your network settings will erase any saved Wi-Fi networks and Bluetooth pairings, requiring you to re-enter them after the reset is complete.

To reset your network settings on most Android devices:

Step 1: Open the Settings app on your smartphone, then tap System or General Management.
Step 2: Go to Reset > Reset Network Settings and confirm the action.

Turn Off Bluetooth

When Bluetooth is on, it can interfere with your device’s ability to receive calls, causing them to go straight to voicemail without ringing. To turn off Bluetooth on an Android device, you can do one of the following:

Swipe down from the top of the screen to open the Quick Settingspanel, then tap the Bluetooth icon to turn it off.

Go to Settings> Connections > Bluetooth and toggle the switch off.

It should help ensure that calls come through to your phone instead of going to voicemail.

Check Airplane Mode

If turning off Bluetooth didn’t solve the issue, another possible cause could be that your phone is in Airplane Mode. Airplane Mode turns off all wireless connections on your phone, including cellular service, which can cause calls to dial straight to voicemail. There are two ways to turn off Airplane mode on Android:

Using the Settings app:

Step 1: Open the Settings app.
Step 2: Tap Network & internet.
Step 3: Toggle off Airplane mode or Flight mode.

Using the Quick Settings panel:

Step 1: Swipe down from the top of the phone screen to access the Quick Settings panel.
Step 2: Look for the Airplane mode or Flight mode icon, then tap it to turn it off.

Check Blocked Numbers

“My boyfriend’s phone goes straight to voicemail when someone is calling. Any idea why that might be?”

Do you also find yourself asking what does it mean? It could be that he has blocked that phone number. To check this:

Step 1: Open the Phone dialer app.
Step 2: Tap the menu icon in the top right corner and select Settings.
Step 3: Tap Block numbers. If you find the number in the blocked list, remove it to ensure that their calls come through to the phone.

If you still have trouble reaching your boyfriend, try calling him from a different number. If your call didn’t go through, you know that he hasn’t blocked your number and that there may be another issue with his phone.

Turn Off Google One VPN

If you’re using Google One VPN, try turning it off to see if that fixes the problem. Some users have reported that Google One VPN can cause incoming calls to a phone to go straight to voicemail. To turn off Google One VPN:

Step 1: Open the Google One app on your Xiaomi Redmi Note 12 5G.
Step 2: At the bottom, go to the Benefits tab, then tap View Details below the Online protection with a VPN section.

Step 3: Toggle off Enable VPN.

Contact Your Carrier

If your phone calls go straight to voicemail after trying all the above, contact your carrier for help. They may be able to troubleshoot the problem or determine if there is a service outage in your area.

And if your carrier confirms that there is no service outage or billing-related block, the problem may be with your phone itself. You may need to try resetting your phone to factory settings or taking it to a repair shop.

The Caller Used Ringless Voicemail

Ringless voicemail is a service that allows businesses to bypass your phone’s ringtone and send you pre-recorded messages directly to voicemail. Ringless voicemail is often used for marketing purposes. If you think you’re receiving ringless voicemail calls, you can contact the company calling you and ask them to remove you from their list.

Part 2: Not Clear About the Root Cause? Troubleshoot Directly by Wondershare Dr.Fone

If you’re unsure what’s causing your calls to go straight to voicemail, you can try using the Dr.Fone System Repair tool. This software can scan and repair your phone for any underlying problems, which may fix the issue and get your calls ringing again.

Dr.Fone supports over 1000 Android models, including unlocked Xiaomi Redmi Note 12 5G models and models from carriers like AT&T and Vodafone. It has an intuitive interface and is easy to use, even for beginners. Learn below the steps on how to use Dr.Fone System Repair to fix incoming calls that dial straight to voicemail:

Step 1: Download Dr.Fone on your computer, then launch it once installed.

safe & secure

4,118,635 people have downloaded it

Step 2: Connect your smartphone to your desktop or computer using a USB cable. Next, from the Toolbox homepage, select System Repair.

Step 3: Select Android as the Xiaomi Redmi Note 12 5G device type.

Step 4: Click Start to begin repairing your smartphone.

Step 5: Select the Xiaomi Redmi Note 12 5G device details on the Name, Model, Country, and Carrier drop-down lists. Next, select the agreement checkbox, then click Next to proceed.

Step 6: Follow the in-app instructions to enter Download mode on your Xiaomi Redmi Note 12 5G, then click Next.

Step 7: Wait while the app downloads the firmware; once done, click Fix Now.

Step 8: Enter the code in the input box to verify the Xiaomi Redmi Note 12 5G device information in the dialogue box, then click Confirm.

Step 9: The app will start repairing the system issue on your Xiaomi Redmi Note 12 5G. Once completed, your app should restart, then click Done to close the app.

You May Also Like:

Top 5 Best Android System Repair Apps

How to Fix It: Android Stuck on Boot Screen?

How to Flash Dead Android Phone Safely

Conclusion

When your phone calls go straight to voicemail without ringing, it can be a frustrating and disruptive experience. Not only do you miss important calls from work, friends, or family, but it also leaves you feeling disconnected and out of the loop. As a temporary measure to avoid missing important calls, check your voicemail regularly.

For a prompt solution, consider using Dr.Fone if incoming calls on your phone go straight to voicemail. It is a powerful mobile solution that can also address other system problems, including stuck boot loops, app crashes, black screens, and bricked devices. If you consistently experience this issue, it’s advisable to reach out to a professional for assistance.

safe & secure

4,215,287 people have downloaded it

How to Exit Android Factory Mode On Xiaomi Redmi Note 12 5G?

You’ve often heard that recovery mode will solve just about any problem your Xiaomi Redmi Note 12 5G is experiencing. This is mostly true and one of the components of Android’s recovery mode, factory mode or factory reset is one of the most efficient ways to solve various problems on your device. While factory mode is often a good thing, there are times when your device can enter factory mode on its own. Other times, you can safely enter factory mode but not know how to get out.

Fortunately for you, this article will explain all aspects of factory mode and especially how to safely exit factory mode.

Part 1. What is Android Factory Mode?

Factory mode or what is commonly known as factory reset is one of the options available for you when your Xiaomi Redmi Note 12 5G is in recovery mode. Several options are available for you once you enter Recovery mode on your device but few are as effective as the wipe data/ factory reset option. This option is useful in solving a whole host of problems that your device could be experiencing.

If you have been using your Xiaomi Redmi Note 12 5G for a while now and its performance to be less than ideal, a factory reset might be a good solution. That is however not the only problem a factory reset or factory mode can solve. It will also work for a number or Android errors that you may experience, problems caused by faulty firmware updates and also tweaks made on your device that may not have worked as expected.

It is however important to note that a factory reset or factory mode does often result in the loss of all your data. Therefore a backup is necessary to protect against this data loss risk.

Part 2. Backup your Android Device First

Before we can see how to safely enter and exit factory mode, it is important to have a full backup of your device. We mentioned that a factory mode will likely erase all the data on your device. A backup will ensure that you can get your phone back to its original state before the factory mode.

In order to do a full and complete backup of your device you need to have a tool that will not only ensure that you backup everything on your device but one that makes it easy for you to accomplish this. One of the best tools in the market is Dr.Fone - Backup & Resotre (Android) . This software is designed to enable you to create a full backup of your device.

Dr.Fone - Backup & Restore (Android)

Flexibly Backup and Restore Android Data

Selectively backup Android data to computer with one click.
Preview and restore backup to any Android devices.
Supports 8000+ Android devices.
There is no data lost during backup, export or restore.

3,428,803 people have downloaded it

Follow these very simple steps to use this MobileTrans Phone Transfer software to create a full backup of your device.

Step 1. Launch Dr.Fone on your computer and choose “Backup & Restore”

Run the software on your computer and you can see all features displayed in the primary window. Choose this one: Backup & Restore. It allows you to get your device backed up entirely with one click.

Step 2. Plug in with your device

Then plug in with your device to the computer. When your devic is detected, click on Backup.

Step 3. Select the file types to backup

The program will display all the file types it can support to backup. Just select the ones you would like to backup and hit Backup.

Step 4. Start backing up your device to the computer

After choosing the file’s type for backup, click “Backup” to begin backing up your device to your computer. It will take you a few minutes, depending on the storage of the data.

Note: You can use the feature of “Restore From Backup” to restore the backup file to your device, when you have the need later.

Part 3: One Click Solution to fix Android stuck in factory mode

From the above parts, you are well aware about what is factory mode. As we discussed, this mode fixes most troubles with Android devices.

But for situations when your Xiaomi Redmi Note 12 5G gets stuck in this very same factory mode, the most feasible solution for you is Dr.Fone - System Repair (Android) . This tool fixes all Android system issues including unresponsive or bricked device, stuck on Xiaomi Redmi Note 12 5G logo or factory mode or blue screen of death with a single click.

Dr.Fone - System Repair (Android)

One click fix to Android stuck in factory mode

You can easily fix your Android stuck in factory mode with this tool.
The one-click solution’s ease of operation is appreciable.
It has carved a niche being the first Android repair tool in the market.
You don’t need to be a pro in technology to use this program.
It is compatible with all latest Xiaomi Redmi Note 12 5G devices like Galaxy S9.

3,645,867 people have downloaded it

In this part we will explain how to exit Android recovery mode using Dr.Fone - System Repair (Android) . Prior to proceeding, you got to remember that device backup is paramount to keep your data safe. This process might erase your Xiaomi Redmi Note 12 5G data.

Phase 1: Ready your device and connect it

Step 1: Installation completion needs to be followed by running Dr.Fone on your system. Over the program window, tap ‘Repair’ afterwards and get the Android device connected.

Step 2: Select the ‘Android Repair’ option from the list to fix Android stuck in factory modeissue. Hit the ‘Start’ button soon after.

Step 3: Select Android device details on the Xiaomi Redmi Note 12 5G device information window, followed by tapping the ‘Next’ button.

Step 4: Enter ‘000000’ for confirmation then proceed.

Phase 2: Get in ‘Download’ mode for repairing the Android device

Step 1: It’s important to put the Android device in ‘Download’ mode, here are the steps to do so –

On a ‘Home’ button-less device – turn off the Xiaomi Redmi Note 12 5G device and push down the ‘Volume Down’, ‘Power’ and ‘Bixby’ buttons for about 10 seconds and un-hold. Now, hit the ‘Volume Up’ button to get into ‘Download’ mode.

For a device with ‘Home’ button – switch it off and hold down the ‘Power’, ‘Volume Down’ and ‘Home’ buttons together for 10 seconds and release. Click the ‘Volume Up’ button for entering ‘Download’ mode.

Step 2: Press ‘Next’ for initiating firmware downloading.

Step 3: Dr.Fone –Repair (Android) starts Android repair as soon as download and verification of firmware is done. All Android issues along with Android stuck in factory mode will be fixed now.

Part 4. Common Solutions to Exit Factory Mode on Android

Having a backup of all your data will eliminate the risk of losing any of your data. You can now safely exit factory mode using one of the 2 methods below. These two methods will work on a rooted device.

Method 1: Using “ES File Explorer”

To use this method, you will need to have installed file explorer on your device.

Step 1: Open “ES File Explorer” and then press the icon on the top left corner

Step 2: Next, go to “Tools” and then turn on “Root Explorer”

Step 3: Go to Local> Device> efs> Factory App and then open factorymode as text in the “ES Note Editor” Turn it ON

Step 4: Open keystr as text in the “ES Note Editor” and change it to ON. Save it.

Step 5: Reboot the Xiaomi Redmi Note 12 5G device

Method 2: Using Terminal Emulator

Step 1: Install Terminal emulator

Step 2: Type “su”

Step 3: Then Type the following;

rm /efs/FactoryApp/keystr

rm /efs / FactoryApp/ Factorymode

Echo –n ON >> / efs/ FactoryApp/ keystr

Echo –n ON >> / efs/ FactoryApp/ factorymode

chown 1000.1000/ efs/FactoryApp/keystr

chown 1000.1000/ efs/FactoryApp/ factorymode

chmod 0744 / efs/FactoryApp/keystr

chmod 0744 / efs/ FactoryApp/ factorymode

reboot

You can also exit factory mode on unrooted device by going to Settings> Application manager> All and the search for Factory Test and “Clear Data”, “Clear Cache”

As much as factory mode can be a useful solution to a number of problems, it can be quite annoying when it pops up unexpectedly. Now you are equipped with 2 effective solutions to help you safely exit factory mode if ever you find yourself in this situation.

HowTo

Xiaomi Redmi Note 12 5G Not Connecting to Wi-Fi? 12 Quick Ways to Fix | Dr.fone