Super Easy Ways To Deal with Lava Blaze Curve 5G Unresponsive Screen

The evolution of smartphones signifies the development of mobile communication technology. Different from the initial years, they are not just used for messaging and calling but have many other applications. Lava Blaze Curve 5G cell phones are presently utilized for perusing the Internet and exploring through maps, photography, videography, and numerous other used cases. A development in arranged availability goes hand-in-hand with the development of cell phones.

Lava Blaze Curve 5G smartphones are gaining popularity owing to their low costs, high quality, and innovative features. High-resolution cameras, extensive battery life, and lightning-fast processing are just a few of the advantages of these mobile devices. Nevertheless, customers may sometimes need help with issues, such as a non-functioning Lava Blaze Curve 5G touchscreen, which may be challenging.

Some common issues might arise for Lava Blaze Curve 5G phone users. The Redmi note 4 touch not working is a serious problem. It can only go up to the initialization screen. In this guide, you’ll find the information you need to troubleshoot and fix the most common problems reported by Motorola customers.

What causes a Lava Blaze Curve 5G Screen to be unresponsive?

The screen on your Lava Blaze Curve 5G phone could stop responding for several reasons. The touchscreen, the system software, or the hardware itself might all be at fault. To effectively address an issue, it is crucial to locate its origins.

The following are some potential reasons for an unresponsive screen on a Lava Blaze Curve 5G device, along with descriptions of each.

Power Tools add-on for Google Sheets, Lifetime subscription

There are signs of soft bricking

A touch screen not working on Lava Blaze Curve 5G smartphones indicates a soft brick (recoverable by firmware update), often caused by a defective or undercharged battery. System file corruption, old firmware, or failed upgrades are all possible causes. Several customers have complained that after installing a software update, their Lava Blaze Curve 5G 4 or 5 device’s screen became unresponsive and remained at the boot logo.

Screensaver Factory, Create stunning professional screensavers within minutes. Create screensavers for yourself, for marketing or unlimited royalty-free commercial distribution. Make screensavers from images, video and swf flash, add background music and smooth sprite and transition effects. Screensaver Factory is very easy to use, and it enables you to make self-installing screensaver files and CDs for easy setup and distribution. Screensaver Factory is the most advanced software of its kind.

There might be issues with the Lava Blaze Curve 5G device itself

Screens on Lava Blaze Curve 5G devices may become unresponsive for a variety of hardware-related reasons. A broken LCD panel, faulty touch sensor, or loosened ribbon wires are all possible causes. Every Lava Blaze Curve 5G device, including the Note 4 and 5, is susceptible to these problems.

There might be errors in the updated software

The Android operating system is adjustable. Some of our technological advancements may backfire on us. The phone won’t power on or become stuck in a boot loop where the logo will only show intermittently. For example, some Lava Blaze Curve 5G 4 and 5 users have reported their screens are unresponsive after a software update, rendering the Lava Blaze Curve 5G device unusable.

The common solutions to solve a Lava Blaze Curve 5G Screen unresponsive

Could anything be more annoying than a broken touchscreen on your Lava Blaze Curve 5G phone? If this happens, the gadget is useless, and you won’t be able to do even the simplest tasks. Even so, it’s common for the screen to cease responding to touches.

Before taking the item in for repairs, see if you can figure out the problem independently. Do you want to learn the method? If the touch screens on your Lava Blaze Curve 5G stop working, don’t panic; we’ll teach you exactly what to do.

Solution 1: Try to restart your device

Giving your Lava Blaze Curve 5G a restart is one of the most common solutions if you encounter an unresponsive screen on your phone. Here’s how.

Step 1: Press and hold the power button until the screen becomes black;

Step 2: After 1 minute or so, hold the power button again to power on the Lava Blaze Curve 5G device.

WinUtilities Pro

Solution 2: Check your charging port and battery

If the battery of your Lava Blaze Curve 5G is empty, your screen is expected to be unresponsive. To fix that, here are some easy steps for you:

Charge your phone.
Leave it for about an hour.
Come back to check. Turn your phone on.
Test if the touchscreen is now working.

Solution 3: Contact Customer Service

Let’s assume you’ve applied every possible course of action. For example, your Lava Blaze Curve 5G 4 touchscreen is still unresponsive. You may contact the brand’s customer support department if you need assistance. When the time comes, they’ll always know what to do.

Based on the customer’s feedback, one of the frequent issues of the Lava Blaze Curve 5G is when the screen becomes unresponsive. These issues should not usually happen, but if you find yourself in this dilemma, a list of other solutions below will help you.

Solution 4: Turning on your full screen option offered by MI

Steps to activate full screen gestures

Step 1: Browse you setting

Step 2: Search for full screen display

Step 3: From here, tap the screenshot on the right with the toggle labeled Full screen gestures

This may include gestures to get used to but it will also fix when your touchscreen sometimes stops responding.

Solution 5: Backup and Factory Reset is always a choice

Doing a factory reset may be your last remaining choice if the preceding solutions are unsuccessful. If you do this, all of the information on your phone will be deleted.

Easy Steps in Doing a Factory Reset

Press the power button until the phone shuts down
When your phone shuts down, press and hold the power buttonand Volume down button at the same time until the Android logo displays on the screen.
Recovery Menuwill appear in your screen, press volume down button until Factory reset is highlighted
Press thepower button in selecting the Factory reset option and your phone should restart automatically.

Solution 6: Using Dr. Fone Android Repair Toolkit

If you want to fix issues like this, most simply, Dr. Fone offers that. It is made to provide you with a complete mobile solution. You may have your phone fixed without losing any information. Dr. Fone’s many handy tools will quickly get your phone back in working order.

How to avoid a Lava Blaze Curve 5G screen unresponsive?

Users may take several precautions to avoid the Lava Blaze Curve 5G screen unresponsive problem. Stop using any app stores or other unofficial app providers. There is a risk that doing so may damage your device or introduce viruses that will force your phone to restart. There’s also a risk of losing important information like photos and files.

Regularly updating the Lava Blaze Curve 5G phone’s software is necessary to keep it running smoothly and free of issues. Tools like Dr. Fone allow users to periodically maintain and restore data by cleaning the cache and deleting unused applications.

Avoiding severe temperatures and humidity may protect the Lava Blaze Curve 5G device’s internal components and keep the screen responsive. Using high-quality charging cords is also recommended. For once, consumers won’t have to worry about breaking the screen because they accidentally dropped their cell phones. If users follow these measures, they may reduce the likelihood that their Lava Blaze Curve 5G smartphone will have an unresponsive screen.

safe & secure

Conclusion

Sometimes, Lava Blaze Curve 5G smartphones may experience problems with their screen. This occurs if there is an issue with the functioning of a new app or a software update. Several Lava Blaze Curve 5G phone owners have reported problems with an unresponsive screen. However, the remedies outlined here should help you quickly and efficiently fix the issue and get your phone back up and running. Keep your phone updated, and remember to back up your data often to avoid this problem in the future.

When following the directions, the user may require more research into some troubleshooting techniques. If this is the case, Dr.Fone Repair is usually the solution. The fact that Dr. Fone can continually tweak his system of unresponsive screens is wonderful news. This helpful tool can fix both black screens and endless starting cycles. That’s why it’s an integral part of every modern computer.

Lava Blaze Curve 5G Stuck on Screen – Finding Solutions For Stuck on Boot

The market has embraced Lava Blaze Curve 5G for being the pioneers in the industry. Although the company lacked in providing explicit smartphones, they were still able to catch up with the race. Lava Blaze Curve 5G C31, known to provide durability of the next level, is taking up the latest shelves of Lava Blaze Curve 5G smartphones. Although the company promises reliability, there are several problems involving such smartphones.

One prominent solution stated by Lava Blaze Curve 5G users involves the screen stuck in the boot. If your Lava Blaze Curve 5G is stuck on the “Lava Blaze Curve 5G” screen for no particular reason, you will have to read this article. As this article tackles all reasons involving the problem, it comes up with the necessary solutions. These solutions will help Lava Blaze Curve 5G users find solutions for their stuck screens on the boot.

Part 1: What Causes Lava Blaze Curve 5G Screen Stuck on Boot?

Has your Lava Blaze Curve 5G recently been stuck on the boot loop screen? If it is happening or has happened to you, there are some reasons that you need to be aware of. Having an overview of the causes of Lava Blaze Curve 5G being stuck on the Android One screen can help you redirect yourself toward to right solution. Go through the list of all causes and find more about the issue involving screens stuck on boot in Lava Blaze Curve 5G smartphones:

The Device is Damped in Liquid

It is entirely possible that your Lava Blaze Curve 5G smartphone is immersed in water. With a smartphone dipped in liquid, the Lava Blaze Curve 5G device can turn useless. If you have tried starting it again, it won’t run and might get stuck on the boot.

Soft-Bricked Device

There are multiple conditions where your Lava Blaze Curve 5G smartphone can get soft-bricked. It majorly happens when a particular function in the Lava Blaze Curve 5G device stops working. To counter the problem, it is essential that you can get your device stuck on the boot screen.

Outdated Device

If the equipment wears out after a certain time, there is a need to have it changed. With such obsolete models of Lava Blaze Curve 5G, you will surely face issues like a screen stuck on the boot. Smartphone equipment cannot be revamped, and you will have to go for newer options.

Software Update Required

A software update on your Lava Blaze Curve 5G smartphone might be causing issues with the screen stuck on the boot. The best way to get rid of this problem is to update your system software to the latest version.

Part 2: 5 Solutions To Solve Lava Blaze Curve 5G Screen Stuck on Boot

Do you seek to resolve the problem of the Lava Blaze Curve 5G Plus stuck on the Android One screen? There are specific techniques that can be tried as a remedy. These solutions are tried and recommended by experts. Go through the details provided below to solve the issues with your stuck Lava Blaze Curve 5G screen.

Solution 1: Force Restart Lava Blaze Curve 5G

The first and most proclaimed technique to refresh Lava Blaze Curve 5G devices under such a problem is to force restart them. If the Lava Blaze Curve 5G device is stuck, you will have to perform this process by pressing the “Power” and “Volume Up” keys for 15 seconds. Continue holding the buttons until the Lava Blaze Curve 5G device vibrates or restarts by showing the screen again.

Glarysoft File Recovery Pro - Helps to recover your lost file/data, even permanently deleted data.

Solution 2: Leave the Phone For a While To Drain Its Battery

A conventional way to solve the issue of a stuck screen in Lava Blaze Curve 5G is to leave the phone in its position. As you let its battery drain out, the phone will turn off, and you can activate the Lava Blaze Curve 5G device again by charging it.

Once you restart it this way, all the procedures will initiate again, and the Lava Blaze Curve 5G device will be as good as new. Draining the battery has given you the leverage to regain control over the Lava Blaze Curve 5G device again.

Solution 3: Check For Updates on Lava Blaze Curve 5G Smartphones

Another quick remedy to try on your Lava Blaze Curve 5G smartphones involves updating their software. If there is any prevailing software update to install on the smartphone, you will have to check and update it by following the steps guided below:

Step 1: Open the “Settings” of your Lava Blaze Curve 5G smartphone and continue to the “System” section in the list of options. You will have to access the “Advanced” options in the “System” menu.

Step 2: As you lead to the advanced options, look for “System update” in the provided options. Look for the “Check for update” button. This will check if your Lava Blaze Curve 5G needs any software updates or not.

PDF application, powered by AI-based OCR, for unified workflows with both digital and scanned documents.

Solution 4: Using Wondershare Dr.Fone

One of the finest options available to perform is using a third-party platform that promises smooth operability. Wondershare Dr.Fone is a platform designed to provide such smartphones another life to survive. Its unique functionality repairs all the issues with a smartphone and makes it as good as a new one.

If your Lava Blaze Curve 5G Plus is stuck on the Android One screen, this platform is the ultimate solution for you. With the support of the latest devices and software versions, Dr.Fone – System Repair (Android) offers the best results. To know how to repair your Lava Blaze Curve 5G smartphone with the help of this tool, look through the steps featured next:

Step 1: Open Dr.Fone and Select System Repair

As you launch Dr.Fone after downloading it on your computer, continue to the “System Repair” option. You will have to start by connecting the Android device to the computer through a USB cable. Select “Android Repair” from the options available and continue to the following options.

Step 2: Define Device Information and Confirm

You will be directed to the Lava Blaze Curve 5G device information screen, where you must define the identification parameters of the Lava Blaze Curve 5G device. Select the brand, name, model, country, and carrier details for proper system recovery. On clicking “Next,” you will receive a warning where you will have to type the number “000000” to proceed with the method.

Step 3: Put Your Lava Blaze Curve 5G in Download Mode

Following this, you will have to put your Lava Blaze Curve 5G in Download Mode. For that, you need to follow the steps according to the condition of the Lava Blaze Curve 5G device:

For Devices with Home Button:

Power off your Android and continue to press and hold the “Volume Down,” “Home,” and “Power” buttons for a few seconds. After holding them for almost 10 seconds, release and press the “Volume Up” button to enter the mode.

For Devices without Home Button:

Turn off the Android device and hold the “Volume Down,” “Bixby,” and “Power” buttons simultaneously for a few seconds. On releasing the buttons, press the “Volume Up” button to enter Download Mode.

Step 4: Start Downloading and Verify Firmware

To proceed, tap the “Next” button to download the firmware. As you verify the firmware, the repairing process starts on your Lava Blaze Curve 5G device.

Solution 5: Contact the Customer Service Center of Lava Blaze Curve 5G

If the issue of the Lava Blaze Curve 5G stuck on the “Lava Blaze Curve 5G” screen continues, you will have to contact the Lava Blaze Curve 5G device’s customer support. With no proper method left for the Lava Blaze Curve 5G device, the only effective technique is to visit the authorized store for Lava Blaze Curve 5G smartphones and claim the issue with the Lava Blaze Curve 5G device. In this way, you might receive or get a fully repaired device with no additional charges if the Lava Blaze Curve 5G smartphone is under warranty.

Part 3: How to Avoid Lava Blaze Curve 5G Screen Stuck on Boot?

What if you come to know that you can avoid the Lava Blaze Curve 5G screen stuck-on boot problem? There are a set of tips and tricks that you can follow to explain how to prevent such an issue in the first place. Follow these tips to learn more about saving your Lava Blaze Curve 5G from such miserable conditions:

1. Protect from Malware

The first thing to protect your Lava Blaze Curve 5G smartphone from getting stuck on the boot is to keep it safe from unauthorized and malicious data. The best thing to keep a device secure is to follow all security protocols and avoid bypassing them. If you try downloading something not authorized by the Play Store itself, for instance, an APK, it can make your device vulnerable to malware.

2. Keep Your Device Updated

If you feel frustrated by issues like Lava Blaze Curve 5G being stuck on the Android One screen, the best thing to avoid such a problem is to keep your device updated at all costs. Whenever there is an update on your Lava Blaze Curve 5G smartphone, make sure to install it on time and properly. Do not leave updates uninstalled for no reason, as they can hinder the Lava Blaze Curve 5G device’s speed and performance.

3. Do Not Fool Around with System Files

Changing or modifying system files can be fatal for smartphones. Thus, to keep your Lava Blaze Curve 5G safe, you need to keep your hands away from such important files. Modifying a single file can make your device useless or put you in situations like a Lava Blaze Curve 5G smartphone stuck on the boot. For that, the best tip is to keep yourself out of engagement.

4. Use Wondershare Dr.Fone To Manage All Data With Ease

As you have observed, the power of Dr.Fone can be a perfect phone manager for you at all times. While providing system repair services, it can also help you manage your device’s data and other statuses. Thus, consider keeping Dr.Fone close to your device and its operations. In this way, you will be able to have complete control over all types of data present in the Lava Blaze Curve 5G smartphone.

safe & secure

4,675,795 people have downloaded it

Parental Control Software

#1 Rated Parental Control Software.
Monitor & Control all PC Activity!
sentrypc.com/parental-controls/ ## Conclusion

With that, this brings the article on Lava Blaze Curve 5G smartphones to a conclusion. If you are still facing issues with your Lava Blaze Curve 5G stuck on the “Lava Blaze Curve 5G” screen, this article is the perfect solution for your problem.

With all the provided methods, we do hope that you will be able to restore the status of your Lava Blaze Curve 5G smartphone and make it functional. For the finest results, you have also discovered Dr.Fone – System Repair (Android) as the best solution for repairing such devices.

Fix Unfortunately Settings Has Stopped on Lava Blaze Curve 5G Quickly

All of you, sooner or later, must have found the “Unfortunately Settings has stopped” error on your Lava Blaze Curve 5G. The problem can occur if the Settings keeps stopping or crashing. Many times, you may try to open the Settings but it doesn’t even open. Or possibly, it may freeze after getting opened thereby hampering the Lava Blaze Curve 5G device’s performance.

CalendarBudget - Monthly subscription membership to CalendarBudget via web browser or mobile app. Support included.

Well! There can be a number of reasons why this thing happens. For instance, custom ROM installations, not enough space in the Lava Blaze Curve 5G device or perhaps an outdated version of Android. If you are struggling with the same issue and want to know what to do when Android Settings is not responding, this post will help you. We have explained everything in detail along with the solutions. So, scroll down and get things sorted.

Part 1: Clear the cache of Settings and Google Play Service

It is possible that the corrupted cache files are responsible for this error. Hence, as the first tip, we would like you to clear the Settings cache if that is what triggers the “Unfortunately Settings has stopped” issue. Clearing it would definitely make Settings run appropriately. And The steps to clear the cache of the Google Play Services app are similar. Here is how to clear the cache of Settings:

Open “Settings” on your Lava Blaze Curve 5G and choose “Apps & Notifications”/”Apps”/”Application Manager” (the option may differ on different devices).
In the list of applications, look for “Settings” and open it.
Now, select “Storage” followed by “Clear Cache”.

Note: In some phones, the “Clear Cache” option may come after tapping on “Force Stop”. Therefore, go accordingly without getting confused.

Part 2: Clear the Android phone’s RAM and retry

As the next tip, we would like to suggest you clear your device’s RAM by ceasing the running apps in the background. RAM, if at the increased level, is responsible for the Lava Blaze Curve 5G device’s freezing, poor performance, and most probably is the reason behind crashing Settings. Also, if the apps in the background keep running, they might conflict with the Settings and stop it to perform properly. Therefore clearing RAM is important when Android Settings is not responding. Here is how to do it.

Firstly, you need to go to the Recent apps screen. For this, long-press the Home key.
Note: Please note that different devices have different ways to go to the Recent apps screen. Do it according to the Lava Blaze Curve 5G device you own.
Now, swipe the apps and tap on the clear option. You will be able to notice the amount of RAM cleared

Part 3: Uninstall the Google update

Uninstalling Google Play Store updates has also responded well to many users. It has worked in the case of the “Unfortunately Settings has stopped” error. So, we would also like to suggest you use this tip if the others don’t work. Here are the steps to be followed for this.

Open “Settings” on your Android and tap on “Application manager” or “Apps” or “Application.
Now, head to all the apps and select “Google Play Store” from there.
Tap on “Uninstall Updates” and restart your device to check if the crashing Settings issue has been resolved.

KoolReport Pro is an advanced solution for creating data reports and dashboards in PHP. Equipped with all extended packages , KoolReport Pro is able to connect to various datasources, perform advanced data analysis, construct stunning charts and graphs and export your beautiful work to PDF, Excel, JPG or other formats. Plus, it includes powerful built-in reports such as pivot report and drill-down report which will save your time in building ones.

It will help you to write dynamic data reports easily, to construct intuitive dashboards or to build a whole business intelligence cockpit.

KoolReport Pro package goes with Full Source Code, Royal Free, ONE (1) Year Priority Support, ONE (1) Year Free Upgrade and 30-Days Money Back Guarantee.

Developer License allows Single Developer to create Unlimited Reports, deploy on Unlimited Servers and able deliver the work to Unlimited Clients.

Part 4: Uninstall the custom ROM or re-flash the stock ROM

Using a custom ROM on your device brings up this problem due to incompatibility or improper installation. Therefore, you should either uninstall the custom ROM or re-flash the stock ROM. in order to re-flash the stock ROM of your Lava Blaze Curve 5G, the best way would be Dr.Fone - System Repair (Android). It offers one-click functionality to flash stock ROM and that too with full security. Supporting all Lava Blaze Curve 5G devices, it ranks among its counterparts when it comes to fixing crashing Phone app issues or any other Android system issue. It is loaded with the beneficial features which are discussed below.

Dr.Fone - System Repair (Android)

Android repair tool to fix “Unfortunately, Settings Has Stopped”

You needn’t be a tech-savvy to use this
Supports a wide range of Android devices easily, 1000+ being more precise
One-click tool and supports any sort of Android system issue
Higher success rate along with millions of trusted users
Trustworthy and offers an extremely easy interface

4,635,310 people have downloaded it

How to fix crashing Settings using Dr.Fone - System Repair (Android)

Step 1: Download Tool

Visit the official website of Dr.Fone and download the toolbox from there. Go for the installation process and wait until the installation gets over. Launch it now and choose the “System Repair” tab from the main window.

Step 2: Get the Phone Connected

With the help of a USB cable, plug your Lava Blaze Curve 5G into the PC. Upon proper connection, hit on the “Android Repair” option from the left panel.

Step 3: Feed Correct Information

In the next window, you need to fill in some necessary information like the name and model of the mobile device. Enter details like country and career. Check once and hit on “Next”.

Step 4: Enter Download Mode

Now, you need to take your device into Download mode. For this, you need to follow the onscreen instruction according to your device. Click “Next” and you will notice the firmware downloading progress on your screen.

Step 5: Repair the Issue

Once the firmware is completely downloaded, your Lava Blaze Curve 5G will automatically start getting repaired. Stay there and you will receive a notification that the repair is done.

Part 5: Wipe cache partition to restore Settings

Like RAM, wiping cache is also vital so as to make the Lava Blaze Curve 5G device’s operation smoother. And when you are getting the “Unfortunately Settings has stopped” error, it might be due to the collected cache. To remove it, you will need to enter the recovery mode. And the steps for recovery mode range from device to device. For instance, Lava Blaze Curve 5G users have to press the “Home”, “Power” and “Volume Up” buttons. Similarly, HTC and LG device users are supposed to press the “Volume Down” and “Power” buttons. For Nexus, it is “Volume Up, Down” and Power key combinations. Therefore, before going further, make sure what device you own and enter the recovery mode according to it. Now, follow the detailed guide below to wipe the cache partition in order to fix crashing Settings.

Primarily, turn off the Lava Blaze Curve 5G device and enter the recovery mode by pressing the respective key combinations.
You will notice a Recovery screen on your device.
On showing up the recovery screen, look for the “Wipe Cache partition” option and use the “Volume Down” and “Volume Up” buttons to scroll down and up respectively.
On reaching the required option, press the “Power” button to start wiping.
Once finished, click the reboot option and the Lava Blaze Curve 5G device will be rebooted, fixing the issue hopefully.

PDF application, powered by AI-based OCR, for unified workflows with both digital and scanned documents.

Part 6: Factory reset your Android

You can also opt for Factory resetting your device to fix the issue of Settings keeps stopping. By removing everything from the Lava Blaze Curve 5G device, it will make your device run properly. If you have important data on your device, please make sure to create a backup before taking action if you don’t want to lose it. The steps are as follows.

In the “Settings, go to “Backup and Reset”.
Tap on “Factory data reset” followed by “Reset device”.
Wait for the completion of the process and check if Settings is stopping or not after it gets rebooted.

![Android settings not responding - factory reset android](https://images.wondershare.com/drfone/article/2019/04/factory-reset.jpg)

Part 7: Check and update Android OS

A lot of times minor issues crop up due to the operating systems that get outdated. It is because the Lava Blaze Curve 5G device needs to get updated from time-to-time for proper functioning otherwise it will not be able to match up with the fading technologies thereby coming up with issues like “Unfortunately Settings has stopped”. We recommend here you check for the available update and update your device. For this follow the guide below.

Go to “Settings” and tap “About Phone” on your device.
Now, hit on “System Update” and the Lava Blaze Curve 5G device will look for any available update.
If there is any, go along with the prompts to install it and make your phone even smarter.

Conclusion

If your Lava Blaze Curve 5G shows the “Unfortunately Settings has stopped” error, don’t worry. This problem can come from many things like old software or cache issues. You can try easy fixes like clearing cache or updating your system. Sometimes, removing custom ROMs might be needed.

For iOS users facing similar problems, we recommend using Dr.Fone-System Repair (iOS) . It’s known for fixing many iOS problems without losing any data. Remember, a well-working device is just a few steps away!

Power Tools add-on for Google Sheets, 12-month subscription

safe & secure

HowTo

Super Easy Ways To Deal with Lava Blaze Curve 5G Unresponsive Screen | Dr.fone